Pipe metal and welded connection defect repair by cladding

2020 ◽  
Vol 10 (4) ◽  
pp. 379-385
Author(s):  
Nikolay G. Goncharov ◽  
◽  
Alexey A. Yushin ◽  
Oleg I. Kolesnikov ◽  
Pavel A. Ponomarev ◽  
...  
Keyword(s):  
Surface Defects ◽  
Slag Inclusion ◽  
Test Results ◽  
Pipe Metal ◽  
Circular Joint ◽  
Defect Repair ◽  
The One ◽  
Welded Connection ◽  
Optimal Quality

Cladding repair is the one of the most simple and least expensive repair technologies. It refers to both permanent and temporary repair methods. It reduces work costs and time of repair works while retaining the quality required by the statutory requirements. With the help of cladding repair, a significant number of defects of corrosion-mechanical origin can be eliminated. The problem of improving this technology is of utmost importance. The purpose of the present research is to develop the technology for effective and safe cladding repair of such defects as corrosion damages of pipe metal and such welded connection defects as incomplete groove filling, undercut, pores, strikes, slag inclusion. The following problems were solved to reach this goal: research of thermal cycles in the course of cladding, research of cladding modes, development of multipass repair technology, determination of allowable defect parameters, and detection of methods for optimal quality control of repaired areas. The specialists performed testing of full-scale pipe samples and circular joint of pipes, imitating the surface defects after cladding repair. The test results did not reveal the damage of metal and welded connection areas. Cladding repair allows recovering bearing capacity of pipeline to design level. This technology can be used in the works on shutdown pipelines and on pipelines under operation.

Two-Stage Procedure for the Quantitative Determination of Autoprothrombin III Concentration and Some Applications

1967 ◽  
Vol 18 (01/02) ◽  
pp. 198-210 ◽  
Author(s):  
Ronald S Reno ◽  
Walter H Seegers
Keyword(s):  
Prothrombin Time ◽  
Factor Vii ◽  
Two Stage ◽  
Pronounced Increase ◽  
One Stage ◽  
Assay Procedure ◽  
Bovine Plasma ◽  
The One ◽  
Autoprothrombin C

SummaryA two-stage assay procedure was developed for the determination of the autoprothrombin C titre which can be developed from prothrombin or autoprothrombin III containing solutions. The proenzyme is activated by Russell’s viper venom and the autoprothrombin C activity that appears is measured by its ability to shorten the partial thromboplastin time of bovine plasma.Using the assay, the autoprothrombin C titre was determined in the plasma of several species, as well as the percentage of it remaining in the serum from blood clotted in glass test tubes. Much autoprothrombin III remains in human serum. With sufficient thromboplastin it was completely utilized. Plasma from selected patients with coagulation disorders was assayed and only Stuart plasma was abnormal. In so-called factor VII, IX, and P.T.A. deficiency the autoprothrombin C titre and thrombin titre that could be developed was normal. In one case (prethrombin irregularity) practically no thrombin titre developed but the amount of autoprothrombin C which generated was in the normal range.Dogs were treated with Dicumarol and the autoprothrombin C titre that could be developed from their plasmas decreased until only traces could be detected. This coincided with a lowering of the thrombin titre that could be developed and a prolongation of the one-stage prothrombin time. While the Dicumarol was acting, the dogs were given an infusion of purified bovine prothrombin and the levels of autoprothrombin C, thrombin and one-stage prothrombin time were followed for several hours. The tests became normal immediately after the infusion and then went back to preinfusion levels over a period of 24 hrs.In other dogs the effect of Dicumarol was reversed by giving vitamin K1 intravenously. The effect of the vitamin was noticed as early as 20 min after administration.In response to vitamin K the most pronounced increase was with that portion of the prothrombin molecule which yields thrombin. The proportion of that protein with respect to the precursor of autoprothrombin C increased during the first hour and then started to go down and after 3 hrs was equal to the proportion normally found in plasma.

SIMPLIFIED DEXAMETHASONE SUPPRESSION TEST

1969 ◽  
Vol 61 (2) ◽  
pp. 219-231 ◽  
Author(s):  
V. H. Asfeldt
Keyword(s):  
Cushing’S Syndrome ◽  
Normal Subjects ◽  
Cushing's Syndrome ◽  
Dexamethasone Suppression Test ◽  
Clinical Value ◽  
Suppression Test ◽  
The One ◽  
Steroid Excretion ◽  
Dexamethasone Suppression

ABSTRACT This is an investigation of the practical clinical value of the one mg dexamethasone suppression test of Nugent et al. (1963). The results, evaluated from the decrease in fluorimetrically determined plasma corticosteroids in normal subjects, as well as in cases of exogenous obesity, hirsutism and in Cushing's syndrome, confirm the findings reported in previous studies. Plasma corticosteroid reduction after one mg of dexamethasone in cases of stable diabetes was not significantly different from that observed in control subjects, but in one third of the insulin-treated diabetics only a partial response was observed, indicating a slight hypercorticism in these patients. An insufficient decrease in plasma corticosteroids was observed in certain other conditions (anorexia nervosa, pituitary adenoma, patients receiving contraceptive or anticonvulsive treatment) with no hypercorticism. The physiological significance of these findings is discussed. It is concluded that the test, together with a determination of the basal urinary 17-ketogenic steroid excretion, is suitable as the first diagnostic test in patients in whom Cushing's syndrome is suspected. In cases of insufficient suppression of plasma corticosteroids, further studies, including the suppression test of Liddle (1960), must be carried out.

EVALUASI ANR PADA TRANSMISI DATA NETWORK TERHADAP WP-REST API DALAM APLIKASI ANDROID

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Agung Riyadi
Keyword(s):  
Large Data ◽  
Data Retrieval ◽  
Test Results ◽  
Android Application ◽  
Retrieval Process ◽  
Request Queue ◽  
Plant Data ◽  
Android Development ◽  
Rest Api ◽  
The One

The One of many way to connect to the database through the android application is using volleyball and RESTAPI. By using RestAPI, the android application does not directly connect to the database but there is an intermediary in the form of an API. In android development, Android-volley has the disadvantage of making requests from large and large data, so an evaluation is needed to test the capabilities of the Android volley. This research was conducted to test android-volley to retrieve data through RESTAPI presented in the form of an application to retrieve medicinal plant data. From the test results can be used by volley an error occurs when the back button is pressed, in this case another process is carried out if the previous volley has not been loaded. This error occurred on several android versions such as lollipops and marshmallows also on some brands of devices. So that in using android-volley developer need to check the request queue process that is carried out by the user, if the data retrieval process by volley has not been completed, it is necessary to stop the process to download data using volley so that there is no Android Not Responding (ANR) error.Keywords: Android, Volley, WP REST API, ANR Error

A Validated 2D-LC-UV Method for Simultaneous Determination of Imatinib and N-demethylimatinib in Plasma and Its Clinical Application for Therapeutic Drug Monitoring with GIST Patients

2020 ◽  
Vol 17 ◽  
Author(s):  
Houli Li ◽  
Di Zhang ◽  
Xiaoliang Cheng ◽  
Qiaowei Zheng ◽  
Kai Cheng ◽  
...  
Keyword(s):  
Therapeutic Drug Monitoring ◽  
One Dimension ◽  
Therapeutic Drug ◽  
Plasma Samples ◽  
Column Temperature ◽  
Injection Volume ◽  
Target Analytes ◽  
The One ◽  
Middle Column

Background: The trough concentration (Cmin) of Imatinib (IM) is closely related to the treatment outcomes and adverse reactions of patients with gastrointestinal stromal tumors (GIST). However, the drug plasma level has great interand intra-individual variability, and therapeutic drug monitoring (TDM) is highly recommended. Objective: To develop a novel, simple, and economical two-dimensional liquid chromatography method with ultraviolet detector (2D-LC-UV) for simultaneous determination of IM and its major active metabolite, N-demethyl imatinib (NDIM) in human plasma, and then apply the method for TDM of the drug. Method: Sample was processed by simple protein precipitation. Two target analytes were separated on the one-dimension column, captured on the middle column, and then transferred to the two-dimension column for further analysis. The detection was performed at 264 nm. The column temperature was maintained at 40˚C and the injection volume was 500 μL. Totally 32 plasma samples were obtained from patients with GIST who were receiving IM. Method: Sample was processed by simple protein precipitation. Two target analytes were separated on the one-dimension column, captured on the middle column, and then transferred to the two-dimension column for further analysis. The detection was performed at 264 nm. The column temperature was maintained at 40˚C and the injection volume was 500 μL. Totally 32 plasma samples were obtained from patients with GIST who were receiving IM. Conclusion: The novel 2D-LC-UV method is simple, stable, highly automated and independent of specialized technicians, which greatly increases the real-time capability of routine TDM for IM in hospital.

scholarly journals The Concept of Accuracy Analysis of the Vertical Displacements Gained from the Hydrostatic Levelling Systems’ Measurements

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4842
Author(s):  
Waldemar Kamiński
Keyword(s):  
Accuracy Assessment ◽  
Theoretical Models ◽  
Vertical Displacement ◽  
Serial Connection ◽  
Vertical Displacements ◽  
Comprehensive Determination ◽  
The One ◽  
The Individual ◽  
Reference Sensor

Nowadays, hydrostatic levelling is a widely used method for the vertical displacements’ determinations of objects such as bridges, viaducts, wharfs, tunnels, high buildings, historical buildings, special engineering objects (e.g., synchrotron), sports and entertainment halls. The measurements’ sensors implemented in the hydrostatic levelling systems (HLSs) consist of the reference sensor (RS) and sensors located on the controlled points (CPs). The reference sensor is the one that is placed at the point that (in theoretical assumptions) is not a subject to vertical displacements and the displacements of controlled points are determined according to its height. The hydrostatic levelling rule comes from the Bernoulli’s law. While using the Bernoulli’s principle in hydrostatic levelling, the following components have to be taken into account: atmospheric pressure, force of gravity, density of liquid used in sensors places at CPs. The parameters mentioned above are determined with some mean errors that influence on the accuracy assessment of vertical displacements. In the subject’s literature, there are some works describing the individual accuracy analyses of the components mentioned above. In this paper, the author proposes the concept of comprehensive determination of mean error of vertical displacement (of each CPs), calculated from the mean errors’ values of components dedicated for specific HLS. The formulas of covariances’ matrix were derived and they enable to make the accuracy assessment of the calculations’ results. The author also presented the subject of modelling of vertical displacements’ gained values. The dependences, enabling to conduct the statistic tests of received model’s parameters, were implemented. The conducted tests make it possible to verify the correctness of used theoretical models of the examined object treated as the rigid body. The practical analyses were conducted for two simulated variants of sensors’ connections in HLS. Variant no. I is the sensors’ serial connection. Variant no. II relies on the connection of each CPs with the reference sensor. The calculations’ results show that more detailed value estimations of the vertical displacements can be obtained using variant no. II.

scholarly journals Interaction Boundary Determination of Renewable Energy Sources to Estimate System Strength Using the Power Flow Tracing Strategy

2021 ◽  
Vol 13 (3) ◽  
pp. 1569
Author(s):  
Namki Choi ◽  
Byongjun Lee ◽  
Dohyuk Kim ◽  
Suchul Nam
Keyword(s):  
Renewable Energy ◽  
Power Flow ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Test Results ◽  
Boundary Determination ◽  
Actual Interaction ◽  
Power Flow Tracing ◽  
Estimate System

System strength is an important concept in the integration of renewable energy sources (RESs). However, evaluating system strength is becoming more ambiguous due to the interaction of RESs. This paper proposes a novel scheme to define the actual interaction boundaries of RESs using the power flow tracing strategy. Based on the proposed method, the interaction boundaries of RESs were identified at the southwest side of Korea Electric Power Corporation (KEPCO) systems. The test results show that the proposed approach always provides the identical interaction boundaries of RESs in KEPCO systems, compared to the Electric Reliability Council of Texas (ERCOT) method. The consistent boundaries could be a guideline for power-system planners to assess more accurate system strength, considering the actual interactions of the RESs.

scholarly journals Determination of the Height of Hard X-Ray Sources in the Solar Atmosphere by Measurement of Photospheric Albedo Photons

1975 ◽  
Vol 68 ◽  
pp. 239-241
Author(s):  
John C. Brown ◽  
H. F. Van Beek
Keyword(s):  
Solar Atmosphere ◽  
The Other ◽  
X Ray ◽  
Theoretical Predictions ◽  
Source Models ◽  
The One

SummaryThe importance and difficulties of determining the height of hard X-ray sources in the solar atmosphere, in order to distinguish source models, have been discussed by Brown and McClymont (1974) and also in this Symposium (Brown, 1975; Datlowe, 1975). Theoretical predictions of this height, h, range between and 105 km above the photosphere for different models (Brown and McClymont, 1974; McClymont and Brown, 1974). Equally diverse values have been inferred from observations of synchronous chromospheric EUV bursts (Kane and Donnelly, 1971) on the one hand and from apparently behind-the-limb events (e.g. Datlowe, 1975) on the other.

Stochastic Models for Actuarial Use: The Equilibrium Modelling of Local Markets

2009 ◽  
Vol 39 (1) ◽  
pp. 339-370 ◽  
Author(s):  
Robert J. Thomson ◽  
Dmitri V. Gott
Keyword(s):  
Local Market ◽  
Market Participants ◽  
Market Portfolio ◽  
One Year ◽  
The One ◽  
Mean Variance ◽  
Annual Time ◽  
Time Subject

AbstractIn this paper, a long-term equilibrium model of a local market is developed. Subject to minor qualifications, the model is arbitrage-free. The variables modelled are the prices of risk-free zero-coupon bonds – both index-linked and conventional – and of equities, as well as the inflation rate. The model is developed in discrete (nominally annual) time, but allowance is made for processes in continuous time subject to continuous rebalancing. It is based on a model of the market portfolio comprising all the above-mentioned asset categories. The risk-free asset is taken to be the one-year index-linked bond. It is assumed that, conditionally upon information at the beginning of a year, market participants have homogeneous expectations with regard to the forthcoming year and make their decisions in mean-variance space. For the purposes of illustration, a descriptive version of the model is developed with reference to UK data. The parameters produced by that process may be used to inform the determination of those required for the use of the model as a predictive model. Illustrative results of simulations of the model are given.

The determination of the specific activity of plasma glycerol

1982 ◽  
Vol 60 (6) ◽  
pp. 856-858 ◽  
Author(s):  
Clément Gauthier ◽  
Ross Layberry
Keyword(s):  
Column Chromatography ◽  
Turnover Rate ◽  
Specific Activity ◽  
Anionic Exchange ◽  
Removal Of Contaminants ◽  
The One ◽  
Exchange Resins

A method for the determination of the specific activity of plasma glycerol is described. Anionic contaminants are first removed from deproteinized plasma by anionic exchange resins (treated plasma). Glycerol in treated plasma is then quantitatively converted to glycerol-3-phosphate (G3P), which is isolated by column chromatography and counted for 14C radioactivity. The specific activity thus calculated was 100.1 ± 2.9% of a standard of known specific activity. When the specific-activity of glycerol is determined from plasma without prior removal of anionic contaminants (untreated plasma), the calculated specific activity is 1.99 ± 0.15 times higher than the one calculated after their removal. Omission of the removal of contaminants leads to a near 100% error in the calculation of the turnover rate of glycerol.not available

Sign in / Sign up

Export Citation Format

Share Document