scholarly journals Non-invasive Electrochemical Detection of Glucose using CuO-NiO/MXene Modified Electrode

2020 ◽  
Author(s):  
Alaa Mohamed Elsafi ◽  
Vinotha Krishnasamy ◽  
Karthik Kannan ◽  
John-John Cabibihan ◽  
Abdulaziz Khalid AlAli ◽  
...  
Keyword(s):  
Morphological Analysis ◽  
High Selectivity ◽  
Proton Conductor ◽  
Carbon Electrodes ◽  
Electrochemical Studies ◽  
X Ray Diffraction ◽  
Characterization Methods ◽  
Glassy Carbon Electrodes ◽  
X Ray ◽  
Non Invasive

High levels of glucose or acetone in breath confirms diabetes disease. One of the analytical devices that detect changes in breath is the electrochemical sensor having high selectivity, easy to use and being able to meet diabetic patient’s needs. In this study, sensors were made by fabricating metal oxide coated glassy carbon electrodes and using nafion as a proton conductor. Characterization methods such as X-ray diffraction, FTIR and morphological analysis have been performed for metal oxides to characterize their atomic arrangement and composition. In addition, electrochemical studies were done using Gamry instrument and curves plotted as current in amperes versus voltage to test the coated electrodes conductivity. High selectivity sensors provide promising applications in any field.

Hydrophobic Ferrocene Derivatives as Potential Standards in Electrochemistry

1997 ◽  
Vol 62 (2) ◽  
pp. 185-198 ◽  
Author(s):  
Jaroslav Podlaha ◽  
Petr Štěpnička ◽  
Róbert Gyepes ◽  
Vladimír Mareček ◽  
Alexander Lhotský ◽  
...  
Keyword(s):  
Surface Tension ◽  
Cyclic Voltammetry ◽  
Redox Potential ◽  
Diffusion Coefficients ◽  
Carbon Electrodes ◽  
X Ray Diffraction ◽  
Ferrocene Derivatives ◽  
X Ray ◽  
Special Cases ◽  
As Solubility

Ferrocene (FcH) derivatives monosubstituted by palmitoyl (1), hexadecyl (2), 1-adamantoyl (3) or 1-adamantylmethyl (4) groups were sythesized and characterized by NMR, mass and 57Fe Mossbauer spectroscopy. The structure of 1-adamantoylferrocene was determined by single-crystal X-ray diffraction. Cyclic voltammetry on gold and glass-like carbon electrodes demonstrated that the compounds can serve as electrochemical standards for special cases since their ferrocene/ferricinium redox potential remains stable and reversible, while the properties such as solubility, diffusion coefficients and surface tension are strongly solvent-dependent.

scholarly journals A Highly Selective Turn-On Fluorescent Probe for the Detection of Zinc

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3825
Author(s):  
Ling-Yi Shen ◽  
Xiao-Li Chen ◽  
Xian-Jiong Yang ◽  
Hong Xu ◽  
Ya-Li Huang ◽  
...  
Keyword(s):  
High Selectivity ◽  
Fluorescence Probe ◽  
Stoichiometric Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Turn On ◽  
Imine Nitrogen ◽  
System A ◽  
Plot Analysis ◽  
L System

A novel turn-on fluorescence probe L has been designed that exhibits high selectivity and sensitivity with a detection limit of 9.53 × 10−8 mol/L for the quantification of Zn2+. 1H-NMR spectroscopy and single crystal X-ray diffraction analysis revealed the unsymmetrical nature of the structure of the Schiff base probe L. An emission titration experiment in the presence of different molar fractions of Zn2+ was used to perform a Job’s plot analysis. The results showed that the stoichiometric ratio of the complex formed by L and Zn2+ was 1:1. Moreover, the molecular structure of the mononuclear Cu complex reveals one ligand L coordinates with one Cu atom in the asymmetric unit. On adding CuCl2 to the ZnCl2/L system, a Cu-Zn complex was formed and a strong quenching behavior was observed, which inferred that the Cu2+ displaced Zn2+ to coordinate with the imine nitrogen atoms and hydroxyl oxygen atoms of probe L.

Growth mechanism and characterization of ZnO nano-tubes synthesized using the hydrothermal-etching method

2009 ◽  
Vol 63 (6) ◽  
Author(s):  
Yan Li ◽  
Chuan-Sheng Liu ◽  
Yun-Ling Zou
Keyword(s):  
Room Temperature ◽  
Morphological Analysis ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Etching Method ◽  
Nano Rods ◽  
Two Stages

AbstractZnO nano-tubes (ZNTs) have been successfully synthesized via a simple hydrothermal-etching method, and characterized by X-ray diffraction, field emission scanning electron microscopy and room temperature photoluminescence measurement. The as-synthesized ZNTs have a diameter of 500 nm, wall thickness of 20–30 nm, and length of 5 µm. Intensity of the plane (0002) diffraction peak, compared with that of plane (10$$ \bar 1 $$0) of ZNTs, is obviously lower than that of ZnO nano-rods. This phenomenon can be caused by the smaller cross section of plane (0002) of the nano-tubes compared with that of other morphologies. On basis of the morphological analysis, the formation process of nano-tubes can be proposed in two stages: hydrothermal growth and reaction etching process.

scholarly journals Electrochemical Glucose Oxidation Using Glassy Carbon Electrodes Modified with Au-Ag Nanoparticles: Influence of Ag Content

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Nancy Gabriela García-Morales ◽  
Luis Alfonso García-Cerda ◽  
Bertha Alicia Puente-Urbina ◽  
Leonor María Blanco-Jerez ◽  
René Antaño-López ◽  
...  
Keyword(s):  
Glassy Carbon ◽  
Electrode Surface ◽  
Glucose Oxidation ◽  
Modified Electrodes ◽  
Alkaline Media ◽  
Carbon Electrodes ◽  
X Ray Diffraction ◽  
Simple Method ◽  
Glassy Carbon Electrodes ◽  
Transmission Electron

This paper describes the application of glassy carbon modified electrodes bearing Aux-Agynanoparticles to catalyze the electrochemical oxidation of glucose. In particular, the paper shows the influence of the Ag content on this oxidation process. A simple method was applied to prepare the nanoparticles, which were characterized by transmission electron microscopy, Ultraviolet-Visible spectroscopy, X-ray diffraction spectroscopy, and cyclic voltammetry. These nanoparticles were used to modify glassy carbon electrodes. The effectiveness of these electrodes for electrochemical glucose oxidation was evaluated. The modified glassy carbon electrodes are highly sensitive to glucose oxidation in alkaline media, which could be attributed to the presence of Aux-Agynanoparticles on the electrode surface. The voltammetric results suggest that the glucose oxidation speed is controlled by the glucose diffusion to the electrode surface. These results also show that the catalytic activity of the electrodes depends on the Ag content of the nanoparticles. Best results were obtained for the Au80-Ag20nanoparticles modified electrode. This electrode could be used for Gluconic acid (GA) production.

scholarly journals A Covalent Organic Cage Compound Acting as a Supramolecular Shadow Mask for the Regioselective Functionalization of C60

2020 ◽  
Author(s):  
Viktoria Leonhardt ◽  
Stefanie Fimmel ◽  
Ana-Maria Krause ◽  
Florian Beuerle
Keyword(s):  
Mass Spectrometry ◽  
Single Crystal ◽  
High Selectivity ◽  
Shadow Mask ◽  
X Ray Diffraction ◽  
X Ray ◽  
Trigonal Bipyramidal ◽  
Cage Compound ◽  
Vis Spectroscopy ◽  
Regioselective Functionalization

<div><div><div><p>A trigonal-bipyramidal covalent organic cage compound serves as an efficient host to form stable 1:1-complexes with C60 and C70. Fullerene encapsulation has been comprehensively studied by NMR and UV/Vis spectroscopy, mass spectrometry as well as single-crystal X-ray diffraction. Exohedral functionalization of encapsulated C60 via threefold Prato reaction revealed high selectivity for the symmetry-matched all-trans-3 addition pattern.</p></div></div></div>

scholarly journals The Characteristics of Acetobacter xylinum Membrane Affected by pH of Culture Medium

2019 ◽  
Vol 9 (1) ◽  
pp. 5873-5878
Keyword(s):  
Morphological Analysis ◽  
Culture Medium ◽  
Acetobacter Xylinum ◽  
Membrane Properties ◽  
X Ray Diffraction ◽  
Vapour Permeability ◽  
X Ray ◽  
Initial Ph ◽  
Suitable Amount ◽  
Ph Level

There are numerous previous studies working on biosynthesis, properties and applications of bacterial cellulose (BC) membrane from Acetobacter xylinum bacteria strain. However, there is less research examining the effect of initial pH level on BC membrane properties. Here, BC membranes were produced at different pH level (concentration of acetic acid) of coconut water-based culture medium which are 3.5, 4.0, 4.5, 5.0 and 5.5 for 7 days, statically. The effect of initial pH level during BC production on morphology, physical and characteristics were investigated. The Acetobacter xylinum membrane were studied its crystallinity using X-ray diffraction, FTIR analysis for chemical structure and FESEM for morphological analysis. In addition, the different of initial pH level does affect the membrane yield and breathability properties using an Upright Cup Method of water vapour permeability testing. Although certain suitable amount of acid had reduced the production yield, a breathable BC membrane was produced.

scholarly journals Synthesis of Brushite from Phophogypsum Industrial Waste

2021 ◽  
Vol 12 (5) ◽  
pp. 6580-6588
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Industrial Waste ◽  
Sol Gel ◽  
Dicalcium Phosphate Dihydrate ◽  
X Ray Diffraction ◽  
Characterization Methods ◽  
X Ray ◽  
Phosphate Dihydrate ◽  
Scanning Electron

Dicalcium phosphate dihydrate (DCPD) nanoparticles, also known as brushite, are considered an important bioceramic compound. In this study, brushite was prepared from Moroccan phosphogypsum (PG) using a new sol-gel method. A two-step technique undergoes the synthesis of brushite, the preparation of anhydrite from PG followed by adding phosphoric acid in the presence of sodium hydroxide. The morphology, the chemical composition, and the crystallites size were obtained using Scanning Electron Microscopy (SEM-EDAX), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR), respectively. According to the Debye-Scherrer equation, these characterization methods indicated that the synthesized brushite was highly pure according to the Ca/P ratio of 1.14 and an average crystallites size estimated at 66 nm. These results proved that the brushite was successfully synthesized from Moroccan phosphogypsum.

Two New Mn(II) and Co(II) Complexes with the Tridentate 2,4,6-Tris(2-pyridyl)-1,3,5-triazine Ligand

2005 ◽  
Vol 60 (1) ◽  
pp. 99-105 ◽  
Author(s):  
Arpi Majumder ◽  
Chirantan Roy Choudhury ◽  
Samiran Mitra ◽  
Christoph Marschner
Keyword(s):  
Single Crystal ◽  
Tridentate Ligand ◽  
Electrochemical Studies ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Analyses

Two new complexes of manganese(II) and cobalt(II), [Mn(tptz)(OCH3CO)(H2O)2]ClO4 (1) and [Co(tptz) (OSO3) (H2O)2](H2O)2 (2) {where tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine}, have been prepared and characterised by elemental analyses, spectroscopic, electrochemical studies and single crystal X-ray diffraction. Single crystal X-ray analysis reveals complexes of Mn(II) and Co(II), where tptz remains intact and behaves as a tridentate ligand and forms heptacoordinated Mn(II) and hexacoordinated Co(II) complexes for 1 and 2, respectively.

Supramolecular assemblies of phenolic metalloporphyrins: Structures and electrochemical studies

2019 ◽  
Vol 23 (01n02) ◽  
pp. 103-116 ◽  
Author(s):  
Gia Co Quan ◽  
Morgane Denis ◽  
Brian Abeykoon ◽  
Jean-Bernard Tommasino ◽  
Erwann Jeanneau ◽  
...  
Keyword(s):  
Supramolecular Assembly ◽  
Electrochemical Studies ◽  
Redox Behavior ◽  
Metallic Ions ◽  
X Ray Diffraction ◽  
Supramolecular Compounds ◽  
One Dimensional ◽  
X Ray ◽  
Axial Coordination ◽  
Supramolecular Architectures

The reactivity of two phenolic porphyrins bearing respectively catechol and gallol-derived meso substituents (5,10,15,20-tetrakis(3,4-dihydroxyphenyl)porphyrin and 5,10,15,20-tetrakis(3,4,5-trihydroxyphenyl)porphyrin) with trivalent metallic ions (Fe, Mn, In) was studied. Six supramolecular compounds were obtained and structurally characterized by single crystal X-ray diffraction. In each compound, the supramolecular assembly was based on the axial coordination of a phenolate function to the metallic ion lying in the porphyrinic core. A great diversity of supramolecular architectures was accessible through such simple arrangements, and objects ranging from dimers to one-dimensional polymers were isolated. Some of these assemblies were further investigated in solution by mass spectrometry and by UV-vis absorption spectroscopy. For the iron-based materials, the redox behavior was studied in solution through cyclic voltammetry experiments in inert conditions and under air.

scholarly journals [FeII(L•)2][TCNQF4•−]2: A Redox-Active Double Radical Salt

2019 ◽  
Vol 72 (10) ◽  
pp. 769 ◽  
Author(s):  
Ian A. Gass ◽  
Jinzhen Lu ◽  
Ruchika Ojha ◽  
Mousa Asadi ◽  
David W. Lupton ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Radical Anion ◽  
Electrochemical Studies ◽  
X Ray Diffraction ◽  
Neutral Radical ◽  
X Ray ◽  
Redox Active ◽  
Diffusion Controlled ◽  
Radical Salt ◽  
Radical Ligand

The reaction of [FeII(L•)2][BF4]2 with LiTCNQF4 results in the formation of [FeII(L•)2][TCNQF4•−]2·2CH3CN (1) (L• is the neutral aminoxyl radical ligand 4,4-dimethyl-2,2-di(2-pyridyl)oxazolidine-N-oxide; TCNQF4 is 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane). Single-crystal X-ray diffraction; Raman, Fourier-transform infrared (FTIR) and ultraviolet–visible spectroscopies; and electrochemical studies are all consistent with the presence of a low-spin FeII ion, the neutral radical form (L•) of the ligand, and the radical anion TCNQF4•−. 1 is largely diamagnetic and the electrochemistry shows five well-resolved, diffusion-controlled, reversible one-electron processes.

Sign in / Sign up

Export Citation Format

Share Document