Growth mechanism and characterization of ZnO nano-tubes synthesized using the hydrothermal-etching method

2009 ◽  
Vol 63 (6) ◽  
Author(s):  
Yan Li ◽  
Chuan-Sheng Liu ◽  
Yun-Ling Zou
Keyword(s):  
Room Temperature ◽  
Morphological Analysis ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Etching Method ◽  
Nano Rods ◽  
Two Stages

AbstractZnO nano-tubes (ZNTs) have been successfully synthesized via a simple hydrothermal-etching method, and characterized by X-ray diffraction, field emission scanning electron microscopy and room temperature photoluminescence measurement. The as-synthesized ZNTs have a diameter of 500 nm, wall thickness of 20–30 nm, and length of 5 µm. Intensity of the plane (0002) diffraction peak, compared with that of plane (10$$ \bar 1 $$0) of ZNTs, is obviously lower than that of ZnO nano-rods. This phenomenon can be caused by the smaller cross section of plane (0002) of the nano-tubes compared with that of other morphologies. On basis of the morphological analysis, the formation process of nano-tubes can be proposed in two stages: hydrothermal growth and reaction etching process.

Preparation and Characterization of CuO-Doped ZnO

2010 ◽  
Vol 152-153 ◽  
pp. 847-851
Author(s):  
Yan Li ◽  
Yun Ling Zou ◽  
Jian Gang Li
Keyword(s):  
Fourier Transformation ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Lattice Space ◽  
Fourier Transformation Infrared Spectroscopy ◽  
Doped Zno ◽  
Scanning Electron

ZnO is an important functional semiconductor in application of photoelectric devices. ZnO nano-tubes and the CuO-doped ZnO have been successfully fabricated via hydrothermal method and a solution routine. The samples were characterized by X-ray diffraction, scanning electron microscopy, Fourier transformation infrared spectroscopy and room temperature photoluminescence measurement. The results show that the lattice space (d-value) of the CuO-doped ZnO increases while introducing CuO into its structure. Due to the interaction between Cu2+ and the surface atoms of ZnO, a photoluminescence confinement were observed in the CuO-doped ZnO compared with that of nano ZnO.

Synthesis and Characterization of Missile-Like ZnO

2011 ◽  
Vol 236-238 ◽  
pp. 2183-2186
Author(s):  
Yan Li ◽  
Yun Ling Zou ◽  
Yan Yan Hou
Keyword(s):  
Room Temperature ◽  
Green Emission ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Absolute Alcohol ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Zno Crystal ◽  
Hexagonal Pyramid

A novel missile-like ZnO structure has been synthesized solvo-thermally in absolute alcohol using Zn(NO3)2·6H2O and NaOH as starting materials, and characterized by Scanning Electron Microscopy, powder X-ray diffraction and room temperature photoluminescence. The missile-like ZnO crystal, with a wurtzite structure and a blue-green emission at 459 nm, is made up of two symmetrical rocket-like crystals possessing a prismatic base and a hexagonal pyramid linking with each other along plane (0001(_)).

scholarly journals Rapid four-component synthesis of dihydropyrano[2,3-c]pyrazoles using nano-eggshell/Ti(IV) as a highly compatible natural based catalyst

BMC Chemistry ◽  
2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Arefeh Dehghani Tafti ◽  
Bi Bi Fatemeh Mirjalili ◽  
Abdolhamid Bamoniri ◽  
Naeimeh Salehi
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Reaction Times ◽  
Diffraction Field ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solvent Free Conditions ◽  
High Yields ◽  
Work Up

AbstractNano-eggshell/Ti(IV) as a novel naturally based catalyst was prepared, characterized and applied for the synthesis of dihydropyrano[2,3-c]pyrazole derivatives. The characterization of nano-eggshell/Ti(IV) was performed using Fourier Transform Infrared spectroscopy, X-ray Diffraction, Field Emission Scanning Electron Microscopy, Energy-Dispersive X-ray Spectroscopy, and Thermo Gravimetric Analysis. Dihydropyrano[2,3-c]pyrazoles were synthesized in the presence of nano-eggshell/Ti(IV) via a four component reaction of aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate at room temperature under solvent free conditions. The principal affairs of this procedure are mild condition, short reaction times, easy work-up, high yields, reusability of the catalyst and the absence of toxic organic solvents.

scholarly journals Synthesis and Characterization of Lithium-Ion Conductive LATP-LaPO4 Composites Using La2O3 Nano-Powder

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3502
Author(s):  
Fangzhou Song ◽  
Masayoshi Uematsu ◽  
Takeshi Yabutsuka ◽  
Takeshi Yao ◽  
Shigeomi Takai
Keyword(s):  
Room Temperature ◽  
Conduction Mechanism ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Nano Powder ◽  
Powder Addition

LATP-based composite electrolytes were prepared by sintering the mixtures of LATP precursor and La2O3 nano-powder. Powder X-ray diffraction and scanning electron microscopy suggest that La2O3 can react with LATP during sintering to form fine LaPO4 particles that are dispersed in the LATP matrix. The room temperature conductivity initially increases with La2O3 nano-powder addition showing the maximum of 0.69 mS∙cm−1 at 6 wt.%, above which, conductivity decreases with the introduction of La2O3. The activation energy of conductivity is not largely varied with the La2O3 content, suggesting that the conduction mechanism is essentially preserved despite LaPO4 dispersion. In comparison with the previously reported LATP-LLTO system, although some unidentified impurity slightly reduces the conductivity maximum, the fine dispersion of LaPO4 particles can be achieved in the LATP–La2O3 system.

scholarly journals MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

2000 ◽  
Vol 5 (S1) ◽  
pp. 412-424
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

We report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

scholarly journals Metal-Rich Metallaboranes: Synthesis, Structures and Bonding of Bi- and Trimetallic Open-Faced Cobaltaboranes

Inorganics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 28
Author(s):  
Kriti Pathak ◽  
Chandan Nandi ◽  
Jean-François Halet ◽  
Sundargopal Ghosh
Keyword(s):  
Electronic Structures ◽  
Density Functional ◽  
Room Temperature ◽  
Electron Pair ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Cluster 2 ◽  
Cobalt Center

Synthesis, isolation, and structural characterization of unique metal rich diamagnetic cobaltaborane clusters are reported. They were obtained from reactions of monoborane as well as modified borohydride reagents with cobalt sources. For example, the reaction of [Cp*CoCl]2 with [LiBH4·THF] and subsequent photolysis with excess [BH3·THF] (THF = tetrahydrofuran) at room temperature afforded the 11-vertex tricobaltaborane nido-[(Cp*Co)3B8H10] (1, Cp* = η5-C5Me5). The reaction of Li[BH2S3] with the dicobaltaoctaborane(12) [(Cp*Co)2B6H10] yielded the 10-vertex nido-2,4-[(Cp*Co)2B8H12] cluster (2), extending the library of dicobaltadecaborane(14) analogues. Although cluster 1 adopts a classical 11-vertex-nido-geometry with one cobalt center and four boron atoms forming the open pentagonal face, it disobeys the Polyhedral Skeletal Electron Pair Theory (PSEPT). Compound 2 adopts a perfectly symmetrical 10-vertex-nido framework with a plane of symmetry bisecting the basal boron plane resulting in two {CoB3} units bridged at the base by two boron atoms and possesses the expected electron count. Both compounds were characterized in solution by multinuclear NMR and IR spectroscopies and by mass spectrometry. Single-crystal X-ray diffraction analyses confirmed the structures of the compounds. Additionally, density functional theory (DFT) calculations were performed in order to study and interpret the nature of bonding and electronic structures of these complexes.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

Synthesis and Characterization of ZIF-8 Mixed Matrix Membranes

2014 ◽  
Vol 625 ◽  
pp. 661-664
Author(s):  
Chen Chuang Lok ◽  
Yin Fong Yeong
Keyword(s):  
Room Temperature ◽  
Synthesis Method ◽  
Mixed Matrix Membranes ◽  
Inorganic Filler ◽  
X Ray Diffraction ◽  
Mixed Matrix ◽  
Temperature Synthesis ◽  
X Ray ◽  
Matrix Membranes

In the present work, ZIF-8/6FDA-durene mixed matrix membranes (MMMs) were synthesized and characterized. ZIF-8 nanocrystals, which were used as the inorganic filler, were synthesized using rapid room-temperature synthesis method whereas 6FDA-durene polyimide was synthesized by polycondensation method followed by chemical imidization. Pure and 6FDA-durene membranes loaded with 5 wt%, 10 wt% and 15 wt% of ZIF-8 were fabricated. The structural properties and morphology of the resultant membranes were characterized by using X-ray Diffraction (XRD) and Field emission scanning electron microscope (FESEM) . The EDX images showed that ZIF-8 particles agglomerated in the polymer matrix. However, no phase separation was observed for all resultant MMMs.

Synthesis and characterization of MnO2nanowires

2017 ◽  
Vol 31 (02) ◽  
pp. 1750006 ◽  
Author(s):  
Mohammad Hossein Ghorbani ◽  
Abdol Mahmood Davarpanah
Keyword(s):  
Lithium Batteries ◽  
Manganese Oxides ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Average Crystallite Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Xrd Method

Manganese oxides are of more interest to researchers because of their ability as catalysts and lithium batteries. In this research, MnO2nanowires with diameter about 45 nm were synthesized by sol–gel method at room temperature (RT). Effect of increasing the annealing temperature from 400[Formula: see text]C to 600[Formula: see text]C on crystalline structure of nanostructure were studied and average crystallite size was estimated about 22 nm. X-ray Diffraction (XRD) method, Energy-Dispersive X-ray Diffraction (EDXD), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM) were used to characterize the nanowires of MnO2.

MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

1999 ◽  
Vol 595 ◽  
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

AbstractWe report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

Sign in / Sign up

Export Citation Format

Share Document