scholarly journals Project Selection through a Simulation Model of the Painting Robots

2021 ◽  
Vol 10 (3) ◽  
pp. 1883-1888
Keyword(s):  
Large Scale ◽  
Production Systems ◽  
Manufacturing Sector ◽  
Initial Period ◽  
High Heat ◽  
Production Model ◽  
Hazardous Chemical ◽  
Painting Robot ◽  
Current Production ◽  
High Degree

At present, the manufacturing sector,there is an increase in competition, emerging markets, the rise of competitors in the region and competing countries with the availability of wages creating an impact on the contractors in terms of cost, quality and production capability which makes the production model in use today. There is a need to adjust to enhance competitiveness with regional and global competitors. And automated production lines are normally used in industrial production systems. Rather, it is often a large-scale entrepreneur or from a relocation or automated manufacturing technology that comes with the start-up. Robotic automation has long been used to replace human workers for tasks having a high degree of risk, such as areas with high heat, hazardous chemical area.The use of robots particularly in industrial painting not only protect human health but also improve the productivity. The robot can work continuously without being tired is an advantage compared to human workers.The investment in the robotics project for manufacturingis quite high in the initial period. Often the inventor will need to ensure that their investment is worth for which the robotics system to be used at full capacity.Decisions on an investment involve many intangibles that need to be traded off. In this study, the painting robot production process was simulated and analyzed to how to improve the capacity of the painting robots. FlexSim isused toanalyzed and simulated to optimize the painting robots.In summary, the simulation shows the productivity of a proposed production is more than current production 2.47times. While the capacity increasing 2.97 times.

PEERLESS LCT2

Alloy Digest ◽  
1963 ◽  
Vol 12 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
High Heat ◽  
High Heat Resistance ◽  
Steel Company ◽  
Temperature Performance ◽  
Crucible Steel ◽  
High Degree

Abstract PEERLESS LCT2 is a hot work steel which possesses high heat resistance and a high degree of working hardness at elevated temperatures. This steel is best applied where hardness and resistance to abrasion are of more importance than toughness. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-140. Producer or source: Crucible Steel Company of America.

INTERDISCIPLINARY LINKS, INTEGRATIVE APPROACH,HEURISTIC METHODS AND ARTIFICIAL INTELLIGENCE IN THE MANAGEMENT OF INNOVATION - PART 1

2018 ◽  
Vol 28 (5) ◽  
pp. 1527-1532
Author(s):  
Hristo Patev
Keyword(s):  
Artificial Intelligence ◽  
Production Systems ◽  
Innovation Management ◽  
Integrative Approach ◽  
Heuristic Methods ◽  
Organizational Renewal ◽  
Innovation Activities ◽  
Management Of Innovation ◽  
Inventive Activity ◽  
High Degree

In this first work, out of the total of twenty-four, are considered: Integrative approach, interdisciplinary relations and transnational language in the technical and economic fundament of engineering and management, for the purpose of competitive innovation and successful business. Approaches to develop the innovation with a high degree of complexity. Interactive heuristic methods and algorithms for inventive activity, for inspiring and developing new industrial products and services for households and production systems. Implementing an effective business vocabulary for organizational renewal. Introduction of gaming and "art" methods in innovation management. Intensifying innovation activities through an attempt to introduce artificial intelligence into teamwork, with simultaneous implementation of an engineering and non-engineering approach.

scholarly journals Strategic deployment of riparian buffers and windbreaks in Europe can co-deliver biomass and environmental benefits

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Oskar Englund ◽  
Pål Börjesson ◽  
Blas Mola-Yudego ◽  
Göran Berndes ◽  
Ioannis Dimitriou ◽  
...  
Keyword(s):  
Agricultural Production ◽  
Large Scale ◽  
Production Systems ◽  
Riparian Buffers ◽  
Environmental Benefits ◽  
The European Union ◽  
Negative Effects ◽  
Nitrogen Emissions ◽  
Environmental Objectives ◽  
Eu Policies

AbstractWithin the scope of the new Common Agricultural Policy of the European Union, in coherence with other EU policies, new incentives are developed for farmers to deploy practices that are beneficial for climate, water, soil, air, and biodiversity. Such practices include establishment of multifunctional biomass production systems, designed to reduce environmental impacts while providing biomass for food, feed, bioenergy, and other biobased products. Here, we model three scenarios of large-scale deployment for two such systems, riparian buffers and windbreaks, across over 81,000 landscapes in Europe, and quantify the corresponding areas, biomass output, and environmental benefits. The results show that these systems can effectively reduce nitrogen emissions to water and soil loss by wind erosion, while simultaneously providing substantial environmental co-benefits, having limited negative effects on current agricultural production. This kind of beneficial land-use change using strategic perennialization is important for meeting environmental objectives while advancing towards a sustainable bioeconomy.

Conservation of animal genetic resources: approaches and technologies for in situ and ex situ conservation

2008 ◽  
Vol 42 ◽  
pp. 71-85 ◽  
Author(s):  
J.A. Woolliams ◽  
O. Matika ◽  
J. Pattison
Keyword(s):  
Rural Communities ◽  
Genetic Resources ◽  
Large Scale ◽  
Production Systems ◽  
Regional Distribution ◽  
Livestock Production ◽  
Ex Situ ◽  
Animal Genetic Resources ◽  
The Face ◽  
Livestock Products

SummaryLivestock production faces major challenges through the coincidence of major drivers of change, some with conflicting directions. These are:1. An unprecedented global change in demands for traditional livestock products such as meat, milk and eggs.2. Large changes in the demographic and regional distribution of these demands.3. The need to reduce poverty in rural communities by providing sustainable livelihoods.4. The possible emergence of new agricultural outputs such as bio-fuels making a significant impact upon traditional production systems.5. A growing awareness of the need to reduce the environmental impact of livestock production.6. The uncertainty in the scale and impact of climate change. This paper explores these challenges from a scientific perspective in the face of the large-scale and selective erosion of our animal genetic resources, and concludes thai there is a stronger and more urgent need than ever before to secure the livestock genetic resources available to humankind through a comprehensive global conservation programme.

scholarly journals Evaluating 3D Printers Using Data Envelopment Analysis

2021 ◽  
Vol 11 (9) ◽  
pp. 4209
Author(s):  
Theodore Papatheodorou ◽  
John Giannatsis ◽  
Vassilis Dedoussis
Keyword(s):  
Data Envelopment Analysis ◽  
Fused Deposition Modeling ◽  
Production Systems ◽  
Manufacturing Sector ◽  
Data Envelopment ◽  
Programming Technique ◽  
Fused Deposition ◽  
Efficiency Performance ◽  
3D Printers ◽  
Using Data

Data Envelopment Analysis (DEA) is an established powerful mathematical programming technique, which has been employed quite extensively for assessing the efficiency/performance of various physical or virtual and simple or complex production systems, as well as of consumer and industrial products and technologies. The purpose of the present study is to investigate whether DEA may be employed for evaluating the technical efficiency/performance of 3D printers, an advanced manufacturing technology of increasing importance for the manufacturing sector. For this purpose, a representative sample of 3D printers based on Fused Deposition Modeling technology is examined. The technical factors/parameters of 3D printers, which are incorporated in the DEA, are investigated and discussed in detail. DEA evaluation results compare favorably with relevant benchmarks from experts, indicating that the suggested DEA technique in conjunction with technical and expert evaluation could be employed for evaluating the performance of a highly technological system, such as the 3D printer.

scholarly journals Within-Season Changes in Land-Use Impact Pest Abundance in Smallholder African Cassava Production Systems

Insects ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 269 ◽  
Author(s):  
Andrew Kalyebi ◽  
Sarina Macfadyen ◽  
Andrew Hulthen ◽  
Patrick Ocitti ◽  
Frances Jacomb ◽  
...  
Keyword(s):  
Land Use ◽  
Bemisia Tabaci ◽  
Large Scale ◽  
Production Systems ◽  
Smallholder Farmers ◽  
Negative Relationship ◽  
Central Africa ◽  
Sub Saharan Africa ◽  
Smallholder Farming ◽  
Manihot Esculenta Crantz

Cassava (Manihot esculenta Crantz), an important commercial and food security crop in East and Central Africa, continues to be adversely affected by the whitefly Bemisia tabaci. In Uganda, changes in smallholder farming landscapes due to crop rotations can impact pest populations but how these changes affect pest outbreak risk is unknown. We investigated how seasonal changes in land-use have affected B. tabaci population dynamics and its parasitoids. We used a large-scale field experiment to standardize the focal field in terms of cassava age and cultivar, then measured how Bemisia populations responded to surrounding land-use change. Bemisia tabaci Sub-Saharan Africa 1 (SSA1) was identified using molecular diagnostics as the most prevalent species and the same species was also found on surrounding soybean, groundnut, and sesame crops. We found that an increase in the area of cassava in the 3–7-month age range in the landscape resulted in an increase in the abundance of the B. tabaci SSA1 on cassava. There was a negative relationship between the extent of non-crop vegetation in the landscape and parasitism of nymphs suggesting that these parasitoids do not rely on resources in the non-crop patches. The highest abundance of B. tabaci SSA1 nymphs in cassava fields occurred at times when landscapes had large areas of weeds, low to moderate areas of maize, and low areas of banana. Our results can guide the development of land-use strategies that smallholder farmers can employ to manage these pests.

The academic profession in Russia’s two capitals: The impact of 20 years of transition

2017 ◽  
Vol 16 (5) ◽  
pp. 626-644 ◽  
Author(s):  
Elizaveta Sivak ◽  
Maria Yudkevich
Keyword(s):  
Large Scale ◽  
Academic Career ◽  
Academic Profession ◽  
University Faculty ◽  
Key Characteristics ◽  
Personal Strain ◽  
High Degree ◽  
The Impact ◽  
Russian Universities

This paper studies the dynamics of key characteristics of the academic profession in Russia based on the analysis of university faculty in the two largest cities in Russia – Moscow and St Petersburg. We use data on Russian university faculty from two large-scale comparative studies of the academic profession (‘The Carnegie Study’ carried out in 1992 in 14 countries, including Russia, and ‘The Changing Academic Profession Study’, 2007–2012, with 19 participating countries and which Russia joined in 2012) to look at how faculty’s characteristics and attitudes toward different aspects of their academic life changed over 20 years (1992–2011) such as faculty’s views on reasons to leave or to stay at a university, on university’s management and the role of faculty in decision making. Using the example of universities in the two largest Russian cities, we demonstrate that the high degree of overall centralization of governance in Russian universities barely changed in 20 years. Our paper provides comparisons of teaching/research preferences and views on statements concerning personal strain associated with work, academic career perspectives, etc., not only in Russian universities between the years 1992 and 2012, but also in Russia and other ‘Changing Academic Profession’ countries.

Research on Moving Target Monitoring Collaborative Simulation Technology Based on Multi-Channel

2010 ◽  
Vol 20-23 ◽  
pp. 700-705
Author(s):  
Tian Yuan ◽  
Shang Guan Wei ◽  
Zhi Zhong Lu
Keyword(s):  
Large Scale ◽  
Target Space ◽  
Laboratory Simulation ◽  
Moving Target ◽  
Simulation Technology ◽  
Collaborative Simulation ◽  
Mobile Target ◽  
Target Monitoring ◽  
Six Degree Of Freedom ◽  
High Degree

Multi-channel Virtual reality simulation technology is a kind of simulation technology, which support the grand scene and high degree of immersion, has better visualization effect. In this paper, a moving target monitoring collaboratory simulation technology based on multi-channel is studied. Firstly, study the mathematical modeling foundation of Multi-Channel technology systematically, based on the mobile target spatial model and co-simulation technology, select the appropriate applications of multi-channel technology, building laboratory simulation platform and achieved a space-based six-degree of freedom simulation of multi-channel moving target monitoring simulation. The experiment has proved that in multi-channel target monitoring co-simulation technology used in this paper has strong practicality, combine with a moving target-space model and co-simulation technology, the advantages of objective observation to solve the requirements like large-scale, realism, immersion requirements, etc.

scholarly journals Automation technology as a key component of the Industry 4.0 production development path

2021 ◽  
Author(s):  
Christian Brecher ◽  
Aleksandra Müller ◽  
Yannick Dassen ◽  
Simon Storms
Keyword(s):  
Industry 4.0 ◽  
Information Technologies ◽  
Production Systems ◽  
Product Variety ◽  
Transformation Process ◽  
Smart Manufacturing ◽  
Production Development ◽  
Flexible Production Systems ◽  
Current Production ◽  
Automation Technology

AbstractSince 2011, the Industry 4.0 initiative is a key research and development direction towards flexible production systems in Germany. The objective of the initiative is to deal with the challenge of an increased production complexity caused by various factors such as increasing global competition between companies, product variety, and individualization to meet customer needs. For this, Industry 4.0 envisions an overarching connection of information technologies with the production process, enabling smart manufacturing. Bringing current production systems to this objective will be a long transformation process, which requires a coherent migration path. The aim of this paper is to represent an exemplary production development way towards Industry 4.0 using eminent formalization approaches and standardized automation technologies.

Sign in / Sign up

Export Citation Format

Share Document