scholarly journals DECREASED LEVEL OF METAL IONS OF COPPER (CU) IN THE ELECTROPLATING INDUSTRY WASTE WATER USING ELECTRODEPOSITION METHOD

2018 ◽  
Vol 16 (1) ◽  
pp. 60
Author(s):  
Tangke Veronika ◽  
Bohari Yusuf ◽  
Rahmat Gunawan

The reduction of copper concentration in the electroplating industry wastewater by electrodeposition method by means of Atomic Absorption Spectrophotometer (AAS). The result of research showed that degradation and is big of elimination percent of copper metal have with the effect of time contact and voltage at optimum hence in getting results of final concentration of iron (Fe) successive plate 4,02 ppm and 2,84 ppm of concentration early 35,86 ppm and elimination percent of exclusion at optimum parameter in getting result successive 88,403 % and 92,069 %. While the results of the final concentration of Aluminium (Al) successive plate 2,38 ppm dan 2,22 ppm of concentration early 35,86 ppm and elimination percent of exclusion at optimum parameter in getting result successive 93,363 % dan 93,814%.

2014 ◽  
Vol 4 (1) ◽  
Author(s):  
Nurhasni Nurhasni ◽  
Hendrawati Hendrawati ◽  
Nubzah Saniyyah

Abstrak Penelitian ini bertujuan untuk memanfaatkan sekam padi sebagai penyerap ion logam tembaga dan timbal dalam air limbah telah dilakukan. Metode yang digunakan adalah metode statis (batch). Penentuan kondisi optimum meliputi massa adsorben, pH, konsentrasi adsorbat dan lama pemanasan. Hasil analisis menggunakan Spektrofotometer Serapan Atom (AAS) menunjukkan efisiensi penyerapan tertinggi pada air limbah multikomponen mencapai 99.38% untuk ion logam Pb. Analisis air limbah laboratorium kimia UIN Syarif Hidayatullah Jakarta, menunjukkan penyerapan tertinggi mencapai 78.57% untuk ion logam Cu. Kata kunci : sekam padi, adsorben ion logaam timbal, adsorben ion logam tembaga, air limbah   Abstract This research aims to  rice huskas absorbent of copper and lead metalions in the waste water. The method used is a static method (batch). Determination of optimum conditions includes adsorbent mass, pH, absorbate concentration and duration of heating. The analysis using Atomic Absorption Spectrophotometer (AAS) showed the highest absorption efficiency of Pb metal ion in multicomponent wastewater reached 99,38%. The analysis of wastewater from chemistry laboratorium UIN Syarif Hidayatullah Jakarta showed, the highest absorption of Cu metal ion was 78,57%. Keywords : rice husk, the metal ions cadmium, chromium metal ions, wastewater


Author(s):  
Azura Afrina ◽  
Lazulva Lazulva

This research was carried out due to the existence of the waste heavy metals in the aquatic environment, which was very harmful to the sustainability of the environment. The purpose of this research was to find out the reduction percentage of copper metal (Cu) on the waste. This research using method phytoremediation test. The plants used were water hyacinth (Eichornia crassipes) and algae (Hydrilla verticilata). This study was conducted three times of the repetition in each variable. The measurement of Cu concentration using Atomic Absorption Spectroscopy (AAS) flame. The Results of this research was found that the efficiency of the average reduction in the concentration of Cu by water hyacinth was 82.8368% and the efficiency of the average reduction in the concentration of Cu by algae was 63.4042%.


2019 ◽  
Vol 85 (2) ◽  
pp. 12-16
Author(s):  
I. V. Saunina ◽  
E. N. Gribanov ◽  
E. R. Oskotskaya

The sorption of Hg (II), Cd (II), and As (III) by natural aluminosilicate is studied. It is shown that the mineral absorbs those toxicants in a rather wide pH range, quantitative extraction of analytes being achieved in a neutral or close to neutral medium (pH values range within 7.0 - 8.0; 6.3 - 7.5; 7.4 - 8.5 for Hg (II), As (III), and Cd (II), respectively). The effect of the time of phase contact on the degree of extraction of elements is shown. The sorption capacity of the mineral in optimal conditions of the medium acidity (0.06 mmol/g for mercury, 0.31 mmol/g for cadmium, and 0.52 mmol/g for arsenic) is determined. The distribution coefficients attain values of aboutnX 103-nX 104. A new combined method for determination of Hg (II), Cd (II), and As (III) in natural and waste water is developed and tested. The method consists in a preliminary group sorption concentration of the analytes by aluminosilicate, desorption of the analytes from the surface of the mineral and their subsequent atomic absorption determination. The correctness of the method is verified in analysis of spiked samples. The method is easy to use and exhibits high sensitivity, reproducibility and accuracy of analyte determination. The relative standard deviation does not exceed 0.13. Economic availability and possibility of using domestic sorption materials are the important advantages of the proposed procedure which can be used in the practice of laboratories monitoring the quality and safety of environmental objects.


2020 ◽  
Vol 13 ◽  
Author(s):  
Rishabha Malviya ◽  
Pramod Sharma ◽  
Akanksha Sharma

: Manuscript discussed about the role of polysaccharides and their derivatives in the removal of metal ions from industrial waste water. Quick modernization and industrialization increases the amount of various heavy metal ions in the environment. They can possess various disease in humans and also causes drastic environmental hazards. In this review the recent advancement for the adsorption of heavy metal ions from waste water by using different methods has been studied. Various natural polymers and their derivatives are act as effective adsorbents for the removal of heavy metal ions from the waste water released from the industries and the treated water released into the environment can decreases the chances of diseases in humans and environmental hazards. From the literature surveys it was concluded that the removal of heavy metal ions from the industrial waste water was important to decrease the environmental pollution and also diseases caused by the heavy metal ions. Graft copolymers were acts as most efficient adsorbent for the removal of heavy metal ions and most of these followed the pseudo first order and pseudo second order model of kinetics.


Sign in / Sign up

Export Citation Format

Share Document