scholarly journals A Type of Transportation Problem to be Solved Following the Time Criterion and Considering Vehicle Features

2021 ◽  
Vol 19 (3) ◽  
pp. 74-80
Author(s):  
N. M. Nechitaylo
Keyword(s):  
Optimal Transportation ◽  
Mineral Fertilizers ◽  
Delivery Times ◽  
Operational Solution ◽  
Processing Resources ◽  
Additional Costs ◽  
Delivery Vehicles ◽  
Transportation Plan ◽  
Successive Reduction ◽  
Transport Type

The formulation of classical minimax transport-type problems involves the search for an optimal transportation plan considering only time of delivery of resources. The inevitable additional costs of processing resources at the origin and destination are usually not considered. This approach is fully justified given incommensurability of delivery times of resources along available routes and times of preliminary/subsequent processing of resources. At the same time, in a number of practical problems, the time spent on loading/unloading (for example, when organizing loading of packaged mineral fertilizers from port warehouses onto ships) can be of significant importance. In such cases, when searching for an optimal transportation plan, it is necessary to take into account not only travel times of vehicles used along the set routes, but also the costs of loading and unloading operations, considering the number of available vehicles and their characteristics, for example, payload.In this regard, the objective of the study is not only to develop a method for calculating the optimal transportation plan, but also a method for distributing vehicles, considering their number and features.At the same time, another no less important objective of the study is to substantiate the application of the method of successive reduction of residuals, considering the form of the objective function, which considers not only the main parameters of classical minimax transport-type problems, but also the quantitative characteristics of vehicles involved in the transport operation. It is fundamentally important that the use of the method of successive reduction of residuals determines the polynomial computational complexity of the algorithm, which makes it possible to use it in the operational solution of problems of practical dimension.To solve the problem of distributing available vehicles according to the origin points, considering payload of vehicles, it is proposed to use the method of dynamic programming. An illustrative example of distribution of delivery vehicles, adapted for the use in MS Excel, is considered.

Penjadwalan Mesin dengan Metode Integer Linear Programming pada PT. XYZ

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Fransiskus Lauson Matondang ◽  
Rosnani Ginting
Keyword(s):  
Integer Programming ◽  
Time Delays ◽  
Parallel Machines ◽  
Research Concept ◽  
Total Settlement ◽  
Approach Method ◽  
Additional Costs ◽  
Maximum Completion Time ◽  
Completion Times ◽  
Better Than

PT XYZ sering mengalami keterlambatan waktu karena dalam setiap keterlambatan yang dilakukan selalu ada penalty yang diberikan kepada perusahaan dan hal ini mengakibatkan tambahan biaya , oleh karena itu hal ini harus dihindari dengan membuat penjadwalan yang efisien, dalam hal ini dilakukanlah perbaikan dengan meminimisasi waktu penyelesaian maksimum Cmax pada mesin paralel yang berpola aliran flowshop (dan tidak boleh dilakukan interupsi yang dilakukan pada pekerjaan yang sedang diproses, untuk melakukan pekerjaan lainnya, satu lintasan hanya memproduksi satu produk dan hanya satu produk juga yang dikerjakan secara langsung. Waktu penyelesaian yang berbeda dari setiap mesin dengan pengerjaannya juga adalah masalah yang dihadapi untuk menjadikan mesin mesin ini sesuai menjadi satu penjadwalan yang terintegrasi dengan metode integer programming yang membuat penjadwalan dengan konsep riset operasi dengan metode pendekatan 0-1 utuk menjadi lebih efisien lagi , dihasilkan minimisasi keterlambatan total penyelesaian order dengan 42,28 menit lebih baik dari sebelumnya.   PT XYZ often experiences time delays because in every delay made there is always a penalty given to the company and this results in additional costs, therefore this must be avoided by making efficient scheduling, in this case repairs are carried out by minimizing the maximum completion time of Cmax on parallel machines that are patterned with flowshop flow (and no interruptions should be carried out on the work being processed, to do other work, one track only produces one product and only one product is directly worked. Different completion times of each machine with the workmanship is also the problem faced to make this machine suitable to be one scheduling integrated with integer programming methods that makes scheduling with the operational research concept with the 0-1 approach method to be more efficient, resulting in minimization of the delay in the total settlement of orders with 42.28 minutes was better than before.

The effectiveness of granular chalk use for growing winter wheat on grey forest soil

2020 ◽  
pp. 181-191
Author(s):  
M. Tkachenko ◽  
N. Borys ◽  
Ye. Kovalenko
Keyword(s):  
Winter Wheat ◽  
Physicochemical Properties ◽  
Forest Soil ◽  
Active Substance ◽  
Mass Fraction ◽  
Gray Forest Soil ◽  
Mineral Fertilizers ◽  
Acidic Soils ◽  
Grey Forest Soil

The research aims to establish the eff ectiveness of granular chalk use produced by «Slavuta-Calcium» Ltd. under growing Poliska–90 winter wheat variety, changing the physicochemical properties of grey forest soil and the wheat productivity. It also aims to establish optimal dosis of «Slavuta-Calcium» granular chalk as the meliorant and mineral fertilizer for grey forest soil in the system of winter wheat fertilization. In the temporary fi eld studies, various doses of nutrients N60–90–120P30–45–60K60–90–120 combined with «Slavuta–Calcium» granular chalk in a dose of Ca230–460–690 kg/ha of the active substance were studied against the background of secondary plowing of rotation products – soybean biomass that averaged 2.34 t/ha. Granular chalk is a modern complex highly eff ective meliorant with the content of Ca – 37.7 and Mg – 0.2 %, the mass fraction of carbonates (CaCO3 + MgCO3) makes at least 95 %. It is characterized by a high level of solubility when interacting with moisture in soil. It has a form of white granules, the mass fraction of 4.0–6.0 mm in size granules makes not less than 90 % and the one of 1.0 mm in size makes less than 5 %. Reactivity – 97 %. The granular chalk is advisable to apply on acidic soils, as a highly concentrated calcium-magnesium fertilizer, with the former as the dominant fertilizer, to optimize the physicochemical properties of the soil, as well as the plant nutrition system, in particular, increasing the availability of an element for assimilation by plants and as long-term ameliorants. The eff ectiveness of the use of mineral fertilizers, in particular acidic nitrogen on highly and medium acidic soils, after chemical reclamation is increased by 30–50 %, and slightly acidic by 15–20 %. The increase in productivity of crops from the combined eff ects of nutrients and chalk granulated is usually higher than when separately applied. The eff ectiveness of the integrated action of these elements is manifested in the growth of plant productivity and the quality of the resulting products, as well as the optimization of physical chemical properties and soil buff ering in the long term. In order to optimize the physicochemical properties of the arable layer of gray forest soil and the productive nutrition of agricultural crops, winter wheat, in particular, biogenic elements should be used in doses N60-90-120P30-45- 60K60-90-120 with granulated chalk «Slavuta-Calcium» in doses of Ca230-460-690 kg/ha of active substance. Granulated chalk obtained as a result of industrial grinding of solid sedimentary carbonate rocks of natural origin, subsequently under the infl uence of the granulation process of the starting material contains Ca and Mg carbonates of at least 95 %, dense granules which facilitates convenient mechanized application, as well as chalk suitable for accurate metered application on the quest map. Key words: granular chalk, gray forest soil, chemical reclamation, crop productivity.

Fertilization System as a Factor of Transforming the Humus State of the Soil

2015 ◽  
Vol 2 (2) ◽  
pp. 39-44
Author(s):  
V. Lopushniak
Keyword(s):  
Crop Rotation ◽  
Podzolic Soil ◽  
Humus Content ◽  
Organic Fertilizers ◽  
Mineral Fertilizers ◽  
Forest Steppe ◽  
Content Increase ◽  
Energy Reserves ◽  
Gross Energy ◽  
Stable Forms

Aim. To establish the effect of different fertilization systems in short fi eld crop rotation on the change in the state of humus in the dark gray podzolic soils in Western Forest-Steppe of Ukraine. Methods. Field studies were carried out in a stationary experiment of the Department of Soil Science and Agricultural Chemistry of the L’viv National Agrarian University; determination of humus content – according to DSTU 4289:2004, and that of its labile forms – in accordance with DSTU 4732:2007, fraction-group composition – by Ponomare- va-Plotnikova’s method, according to the measurement procedure 31-497058-008-2002. Results. The use of organo-mineral fertilizer system in short fi eld crop rotation with the saturation of organic fertilizers of 15 t/ha of crop rotation contributes to the humus content increase by 0.7 % after the third rotation in 0–40 cm layer of dark gray podzolic soil, the increase in the share of stable forms of humic compounds up to 57–59 % and the increase in the ratio of R HA :R FA to 1.3–1.4. The study demonstrated very high dependence of amount of gross energy reserves in the humus on the R HA :R FA ratio. Conclusions. The combined application of organic fertili- zers in the form of manure, non-market of the crop (straw) and siderate, along with mineral fertilizers is re- commended in short fi eld crop rotations of Western Forest-Steppe of Ukraine toensure expanded reproduction of fertility of dark gray podzolic soil, improvement of its humus status, increase in gross energy reserves and the share of the stable forms and humic acids in the humus.

PROSPECTS OF OBTAINING ALTERNATIVE FUEL FROM VARIOUS BIOMASS AND WASTE SPECIES IN AZERBAIJAN

2019 ◽  
pp. 25-41
Author(s):  
O. M. Salamov ◽  
F. F. Aliyev
Keyword(s):  
Power Plants ◽  
Energy Intensity ◽  
Oil And Gas ◽  
Renewable Energy Sources ◽  
Calorific Value ◽  
High Energy ◽  
Energy Sector ◽  
Energy Sources ◽  
Mineral Fertilizers ◽  
Gaseous Fuels

The paper discusses the possibility of obtaining liquid and gaseous fuels from different types of biomass (BM) and combustible solid waste (CSW) of various origins. The available world reserves of traditional types of fuel are analyzed and a number of environmental shortcomings that created during their use are indicated. The tables present the data on the conditional calorific value (CCV) of the main traditional and alternative types of solid, liquid and gaseous fuels which compared with CCV of various types of BM and CSW. Possible methods for utilization of BM and CSW are analyzed, as well as the methods for converting them into alternative types of fuel, especially into combustible gases.Reliable information is given on the available oil and gas reserves in Azerbaijan. As a result of the research, it was revealed that the currently available oil reserves of Azerbaijan can completely dry out after 33.5 years, and gas reserves–after 117 years, without taking into account the growth rates of the exported part of these fuels to European countries. In order to fix this situation, first of all it is necessary to use as much as possible alternative and renewable energy sources, especially wind power plants (WPP) and solar photovoltaic energy sources (SFES) in the energy sector of the republic. Azerbaijan has large reserves of solar and wind energy. In addition, all regions of the country have large reserves of BM, and in the big cities, especially in industrial ones, there are CSW from which through pyrolysis and gasification is possible to obtain a high-quality combustible gas mixture, comprising: H2 + CO + CH4, with the least amount of harmful waste. The remains of the reaction of thermochemical decomposition of BM and CSW to combustible gases can also be used as mineral fertilizers in agriculture. The available and projected resources of Azerbaijan for the BM and the CSW are given, as well as their assumed energy intensity in the energy sector of the republic.Given the high energy intensity of the pyrolysis and gasification of the BM and CSW, at the present time for carrying out these reactions, the high-temperature solar installations with limited power are used as energy sources, and further preference is given to the use of WPP and SFES on industrial scale.

Decompensation placental dysfunction: diagnostics and delivery tactics

2017 ◽  
pp. 66-68
Author(s):  
V.I. Boyko ◽  
◽  
S.A. Tkachenko ◽  
Keyword(s):  
Pregnant Women ◽  
Key Words ◽  
Retrospective Analysis ◽  
Control Group ◽  
Present Stage ◽  
Placental Dysfunction ◽  
Perinatal Pathology ◽  
Delivery Times ◽  
Case Rate ◽  
Major Factors

The objective: depression of frequency of perinatal pathology at women with decompensation form of placental dysfunction by improvement of the main diagnostic and treatment-and-prophylactic actions. Patients and methods. 154 pregnant women in gestation term from 22 to 40 weeks were surveyed. Depending on features of course of pregnancy and families of all surveyed it was divided into 4 groups. The group of the retrospective analysis was made by 45 pregnant women with decompensation placental dysfuction, the group of prospective research included 109 pregnant women of whom the main group was made by 38 women with decompensation form of placental dysfunction, the group of comparison included 47 pregnant women with the compensated form of placental dysfunction. The control group was made by 24 pregnant women with the uncomplicated course of pregnancy and labors. The complex of the conducted researches included clinical, ehografical, dopplerometrical, laboratory, morphological and statistical methods. Results. Use of advanced algorithm of diagnostic and treatment-and-prophylactic actions allows to increase efficiency of diagnostics of decompensation form of placental dysfunction for 33.3%, and rational tactics of a delivery leads to depression of perinatal pathology for 22.7%. Conclusion. Decompensation placental dysfuction is one of the main reasons for perinatal mortality and a case rate at the present stage. Use of the algorithm of diagnostic and treatment-and-prophylactic actions improved by us allows major factors of risk of this complication and the indication for change of tactics and delivery times. Key words: decompensation placental dysfunction, diagnostics, delivery tactics.

PARTICULAR QUALITIES OF CONSTRUCTION AND TECHNICAL EXPERTISE OF STRUCTURES AGRICULTURAL WAREHOUSE OF MINERAL FERTILIZERS

2020 ◽  
Author(s):  
I.O. Egorochkina ◽  
◽  
I.A. Serebryanaya ◽  
S. A. Jamaldinov ◽  
F.A. Bataeva ◽  
...  
Keyword(s):  
Functional State ◽  
Mineral Fertilizers ◽  
Technical Expertise ◽  
Technical Documentation ◽  
Load Bearing ◽  
Building Load

The article describes the features of construction and technical expertise of structures of agricultural warehouse of mineral fertilizers. A draft program for visual and detailed instrumental inspection of building load-bearing structures has been developed. In accordance with the recommendations of the regulatory and technical documentation, measures have been developed to repair and restore the functional state of damaged structures.

Sign in / Sign up

Export Citation Format

Share Document