scholarly journals Using Steel Slag for Stabilizing Clayey Soil in Sulaimani City-Iraq

2020 ◽  
Vol 26 (7) ◽  
pp. 145-157
Author(s):  
Zozk Kawa Abdalqadir ◽  
Nihad Bahaaldeen Salih ◽  
Soran Jabbar Hama Salih
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Clayey Soil ◽  
Steel Slag ◽  
Swelling Pressure ◽  
Geotechnical Properties ◽  
California Bearing Ratio ◽  
Engineering Properties ◽  
Clayey Soils

The clayey soils have the capability to swell and shrink with the variation in moisture content. Soil stabilization is a well-known technique, which is implemented to improve the geotechnical properties of soils. The massive quantities of waste materials are resulting from modern industry methods create disposal hazards in addition to environmental problems. The steel industry has a waste that can be used with low strength and weak engineering properties soils. This study is carried out to evaluate the effect of steel slag (SS) as a by-product of the geotechnical properties of clayey soil. A series of laboratory tests were conducted on natural and stabilized soils. SS was added by 0, 2.5, 5, 10, 15, and 20% to the soil. The conducted tests are consistency limits, specific gravity, hydrometer analysis, modified Proctor compaction, swelling pressure, swelling percent, unconfined compressive strength, and California Bearing Ratio (Soaked CBR). The results showed that the values of liquid limit, plasticity index, optimum moisture content, swelling pressure, and swelling percent were decreased when stabilized the soil. However, the values of maximum dry density, unconfined compressive strength, and California bearing ratio were increased with the addition of steel slag with various percentages to the clayey soil samples. The steel slag was found to be successfully improving the geotechnical properties of clayey soils.

scholarly journals Effect Lime and Recron Fibre on Geotechnical Properties of Black Cotton Soil

2019 ◽  
Vol 8 (2) ◽  
pp. 6252-6257
Keyword(s):  
Compressive Strength ◽  
Soil Sample ◽  
Unconfined Compressive Strength ◽  
Geotechnical Properties ◽  
Plasticity Index ◽  
California Bearing Ratio ◽  
Black Cotton Soil ◽  
Optimum Dose ◽  
Clayey Soils ◽  
Limit Test

Clayey soils are considered as the weakest subgrade soil from civil engineering point of view under moist condition. These soils attract and absorb water and loses their strength. Because of this reason certain inherent properties of these clayey soils need modification for their bulk use in construction of highways, embankments etc. Recently, many synthetic fibres have emerged to strengthen soft soils. Synthetic fibres are low-cost materials, hydrophobic and chemically inert in nature which does not allow the absorption or reaction with soil moisture. The inclusion of synthetic fibres provides reinforcement to the soil and use of lime as a soil stabilizer in BC soil cut down the plasticity index and also increase its strength. For this an extensive laboratory test program was conducted to analyse the variation geotechnical properties of soil by changing the percentage of recron fibre at an optimum dose of lime. The laboratory tests include Atterberg Limit Test, Modified Proctor Test, Unconfined Compressive Strength Test and California Bearing Ratio Test. To conduct different tests on soil sample the proportion of lime is kept fixed and proportion of polyester recron fibre is varied from 0% to 1% by dry weight of soil sample for different lengths of fibre(6 mm, 12 mm & 18 mm separately). Optimum dose of lime is find out by plasticity index of BC soil mixed with varying percentages of lime (4%, 6%, 8% and 10%). Results of the experiments shows that with the increase in the appropriate percentage in recron fibre the Unconfined Compressive Strength and California Bearing Ratio increases. On increasing the length of Recron Fibre, the Unconfined Compressive Strength and California Bearing Ratio also increases. Combination of lime and recron fibre in BC soil give higher CBR value. Therefore it can be used in the improvement of Clayey Soil Subgrade in pavement design and in the construction of embankements.

scholarly journals The Effect of Oil Contamination on some Geotechnical Properties of West Qurna Oilfield Soils at Basrah, Southern Iraq

2021 ◽  
Vol 54 (2B) ◽  
pp. 76-84
Author(s):  
Ahmed K. Al-Nimah
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Crude Oil ◽  
Unconfined Compressive Strength ◽  
Liquid Limit ◽  
Geotechnical Properties ◽  
Oil Contamination ◽  
The West ◽  
Coefficient Of Consolidation ◽  
Clayey Silt

Oil contamination in soils causes several geotechnical problems that must be considered during construction. The contamination occurs due to oil seepage which could happen during oil explorations and production processes or oil transportation. The site of West Qurna oilfield in Basrah was selected for this study because it has witnessed oil seepages many times. In order to study the significant impact on geotechnical properties of soils in the West Qurna site, as uncontaminated bulk soil sample was taken at a depth of 1 m, and crude oil was added at weight ratios of 2, 4, 6, 8, and 10 %. Laboratory tests were performed on all samples; these tests included particle size distribution, moisture content, Atterberg’s limits, consolidation, unconfined compressive strength, and water absorption. The results show that soil at the West Qurna site is clayey silt with little sand and the moisture content is 29.21%. The values of liquid limit and plasticity index were gradually decreased, while the plastic limit was increased with increasing of crude oil in the soil of study. There was an increase in consolidation coefficients [compressive index, swelling index, pre-consolidation pressure, and coefficient of consolidation] with an increase in the percentages of crude oil in the soil. The results also show that there was a decrease in the values of unconfined compressive strength and absorption of water as the crude oil was increased in the soil.

scholarly journals Strength Improvement of Weak Subgrade Soil Using Cement and Lime

2019 ◽  
Vol 4 (1) ◽  
Author(s):  
Anigilaje B Salahudeen ◽  
Ja’afar A Sadeeq
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Optimum Moisture Content ◽  
Atterberg Limits ◽  
California Bearing Ratio ◽  
Natural Soil ◽  
Dry Density ◽  
Maximum Dry Density ◽  
Subgrade Soil

The study investigate the suitability of subgrade soil in Baure Local Government Area of Kastina State Nigeria for road construction. The strength properties of the  subgrade was improved using lime and cement. Several analysis including the particle size distribution, specific gravity, Atterberg limits, compaction characteristics, unconfined compressive strength and California bearing ratio tests were performed on natural and lime/cement treated soil samples in accordance with BS 1377 (1990) and BS 1924 (1990) respectively. Soil specimens were prepared by mixing the soil with lime and cement in steps of 0, 3, 6, and 9% by weight of dry soil in several percentage combinations. The Atterberg limits of the weak subgrade soils improved having a minimum plasticity index value of 5.70 % at 3%Lime/6%Cement contents. The maximum dry density (MDD) values obtained showed a significant improvement having a peak value of 1.66 kN/m3 at 9%Lime/9%Cement contents. Similarly, a minimum value of 18.50 % was observed for optimum moisture content at 9%Lime/9%Cement contents which is a desirable reduction from a value of 25.00 % for the natural soil. The unconfined compressive test value increased from 167.30 kN/m2 for the natural soil to 446.77 kN/m2 at 9%Lime/9%Cement contents 28 days curing period. Likewise, the soaked California bearing ratio values increased from 2.90 % for the natural soil to 83.90 % at 9%Lime/9%Cement contents. Generally, there were improvements in the engineering properties of the weak subgrade soil when treated with lime and cement. However, the peak UCS value of 446.77 kN/m2 fails to meet the recommended UCS value of 1710 KN/m2 specified by TRRL (1977) as a criterion for adequate stabilization using Ordinary Portland Cement.            Keywords: Weak subgrade soil, Lime, Cement, Atterberg limits, Maximum dry density, Optimum moisture content, Unconfined compressive strength, California bearing ratio

scholarly journals Investigation of the Application of Various Water Additive Ratios on Unconfined Compressive Strength of Cement-Stabilized Amorphous Peat at Different Natural Moisture Contents

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Atikah Rahmi ◽  
Siti Noor Linda Taib ◽  
Fauzan Sahdi
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Peat Soil ◽  
Soil Improvement ◽  
Engineering Properties ◽  
Soil Reaction ◽  
Moisture Contents ◽  
Ucs Test ◽  
Cement Soil

Natural peat is considered incapable of supporting built structure due to its poor engineering properties. Chemical stabilization is one of the peat soil improvement methods which has been studied by many researchers. This study describes an investigation of water additive (W/A) ratio application on cement-stabilized peat strength. Peat soil at different moisture contents, which are 1210%, 803%, and 380%, were stabilized with cement by W/A ratio of 2.0, 2.5, 3.0, 3.5, and 4.0. Unconfined compressive strength (UCS) test was conducted after the specimens were being air-cured for 28 and 56 days. The result shows that there is an increase of UCS value as the decrease of W/A ratio (the increase of cement dosage) and the increase of curing time and peat moisture content. The higher strength found in the specimen with higher moisture content, compared to the lower one at the same W/A ratio, shows that the mix design of cement-stabilized peat using W/A ratio should have differed under different peat natural moisture contents. From the result, it is also found that cement hydrolysis reaction occurred despite the presence of humic acid in the peat soil, which by many studies is assumed will hinder the cement-soil reaction.

Laboratory Investigation on the Strength Characteristics of Cement-Treated Base

2014 ◽  
Vol 507 ◽  
pp. 353-360 ◽  
Author(s):  
Amiruddin Ismail ◽  
Mojtaba Shojaei Baghini ◽  
Mohamed Rehan Karim ◽  
Foad Shokri ◽  
Ramez A. Al-Mansob ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Resilient Modulus ◽  
Tension Test ◽  
Engineering Properties ◽  
Dry Density ◽  
Flexure Strength ◽  
Indirect Tension ◽  
Indirect Tension Test

Cement-Treated Base (CTB) is a non-conventional method used in road bases materials to improve its engineering properties due to the hardening of cement when moisture is present and extends the period of curing times. This study investigates the effects of cement additive on properties of base layer using laboratory mechanistic evaluation of stabilized soil mixtures. Laboratory tests conducted were Unconfined Compressive Strength (UCS), Indirect Tension test for Resilient Modulus (ITRM) and Flexure Strength (FS) tests. The results revealed that by adding Portland cement, the mechanical properties of the mixture have improved where the UCS is found to be an important quality indicator. In addition, the variables that influenced these tests, which are cement content, curing time, moisture content, and dry density, play important role to determine the performance of CTB. This paper presents the finding of a correlation conducted to analyse the influences of these variables using regression and ANOVA to establish significant models with the aim of predicting the strength base on mixture parameters. Keywords: Cement-Treated Base, Unconfined Compressive Strength, Indirect Tension test for Resilient Modulus, Flexure Strength, Moisture Content, Dry Density, Regression Analysis.

scholarly journals Engineering Properties of Bentonite Stabilized with Lime and Phosphogypsum

2014 ◽  
Vol 22 (4) ◽  
pp. 35-44 ◽  
Author(s):  
Sujeet Kumar ◽  
Rakesh Kumar Dutta ◽  
Bijayananda Mohanty
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Liquid Limit ◽  
California Bearing Ratio ◽  
Engineering Properties ◽  
Unit Weight ◽  
Swell Index ◽  
Dry Unit Weight ◽  
Free Swell ◽  
Free Swell Index

Abstract Engineering properties such as compaction, unconfined compressive strength, consistency limits, percentage swell, free swell index, the California bearing ratio and the consolidation of bentonite stabilized with lime and phosphogypsum are presented in this paper. The content of the lime and phosphogypsum varied from 0 to 10 %. The results reveal that the dry unit weight and optimum moisture content of bentonite + 8 % lime increased with the addition of 8 % phosphogypsum. The percentage of swell increased and the free swell index decreased with the addition of 8 % phosphogypsum to the bentonite + 8 % lime mix. The unconfined compressive strength of the bentonite + 8 % lime increased with the addition of 8 % phosphogypsum as well as an increase in the curing period up to 14 days. The liquid limit and plastic limit of the bentonite + 8 % lime increased, whereas the plasticity index remained constant with the addition of 8 % phosphogypsum. The California bearing ratio, modulus of subgrade reaction, and secant modulus increased for the bentonite stabilized with lime and phosphogypsum. The coefficient of the consolidation of the bentonite increased with the addition of 8 % lime and no change with the addition of 8 % phosphogypsum.

scholarly journals Capability of Pocket Penetrometer to Evaluate Unconfined Compressive Strength of Baghdad Clayey Soil

2018 ◽  
Vol 21 (1) ◽  
pp. 66 ◽  
Author(s):  
Azhar Sadiq Yasun
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Unconfined Compressive Strength ◽  
Clayey Soil ◽  
Sample Type ◽  
Unconfined Compression ◽  
Unconfined Compression Test ◽  
Test Result

Unconfined compressive strength represents an important parameter for soil investigation report test results because the values of cohesion and allowable bearing capacity can directly obtained from the relevant test especially if the clayey soil layers are found at sufficient enough depth above water table level. This paper deals with simple comparison (based on (31) soil samples) between unconfined compressive strength (qu) obtained by using the pocket soil penetrometer tool and the unconfined compressive strength using the conventional test for the same sample penetrated by the pocket penetrometer with different soil moisture contents. Two triaxial specimens, sample type-1- with dimensions 38 X 79mm and type-2- with dimensions 33 X 79mm(diam. X height)) prepared in the libratory. It was found that the results refers that soil pocket penetrometer readings are closed enough to the results that obtained from the unconfined compression test result with certain conditions. The average percentage of difference between penetrometer readings and unconfined compression test result values was (1.103%) for sample type-1- and (1.53%) for sample type -2-. The maximum moisture content for all tests samples was (27.3%) and the minimum was (14.7%) while the average moisture content was(20.9%).

An Experimental Study on Swelling Properties of Expansive Soil Treated with Iron Furnace Slag

2020 ◽  
Vol 27 (3) ◽  
pp. 61-66
Author(s):  
Yaseen Yaseen ◽  
Jawdat Abbas
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Expansive Soil ◽  
Swelling Pressure ◽  
Industrial Wastes ◽  
Engineering Properties ◽  
Swelling Properties ◽  
Waste Products ◽  
Iron Slag ◽  
Furnace Slag

Using industrial waste materials in the treatment of problematic soils is an environmentally friendly and cost-effective technique. It helps in decreasing disposal issues induced by various industrial wastes. Also, it is crucial to understand the behaviour of these waste products before use. This paper presents experimental research in the treatment of expansive soil by the utilization of iron furnace slag. Laboratory program was performed to examine the effect of iron furnace slag on enhancing the engineering properties of expansive soil. Several tests included liquid limits, plastic limits, free swell percentage, swelling pressure, and unconfined compressive strength were conducted on untreated and treated soils. The efficiency of adding 0, 2, 4, and 6 percentages of iron slag to the soil was investigated. The results of the natural and iron slag stabilized soils showed that iron slag has a notable effect on strength parameters and considerable improvement in plasticity and swelling properties. The addition of iron slag to the soil increased the unconfined compressive strength while reduced the swelling potential of soil. It is concluded that the utilization of iron slag to improve the properties of expansive soil is successful and useful

scholarly journals Soil Stabilization using Polypropylene Clamshell Food Containers

2021 ◽  
Vol 1200 (1) ◽  
pp. 012031
Author(s):  
N A C M Salwi ◽  
N Hamzah
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Physical Properties ◽  
Soil Stabilization ◽  
Clayey Soil ◽  
Plastic Waste ◽  
Engineering Properties ◽  
Dry Density ◽  
Successful Implementation ◽  
Food Container

Abstract Soil stabilization is the method of improving the physical properties of soil, such as shear strength and bearing capacity of the soil, by using controlled compaction or the addition of admixtures to produce an improved soil material that has all the desired engineering properties. The new technique of soil stabilization uses plastic waste as an alternative material is of outmost crucial since plastic wastes are non-biodegradable and remain intact after being buried in soil for many years. The present study is focused on investigating the effectiveness of utilizing polypropylene clamshell food containers as soil stabilizers. The physical properties of the untreated clayey soil are determined by conducting moisture content, specific gravity, particle size distribution, and the Atterberg limit test. Also, the Standard Proctor compaction test, as well as the unconfined compressive strength test, are carried out to determine the compaction and strength parameters of the soil sample before and after reinforcing with different percentages of polypropylene clamshell food container strips such as 0.4%, 0.8%, and 1.2%. Findings from this study indicate that the addition of polypropylene clamshell food container strips in the clayey soil is capable of becoming a soil stabilizer agent as the optimum compressive strength of the soil was achieved with replacement of 0.8% of plastic strips, along with increasing the Optimum Moisture Content (OMC) while decreasing the Maximum Dry Density (MDD). Successful implementation of polypropylene plastic in soil stabilization can help minimize the volume of plastic waste in the environment, which then leads to developing a sustainable future by utilizing recyclable material as alternative sources in the geotechnical field.

scholarly journals Stabilization of Black Cotton Soil by Using GGBS, Lime and Nano-Silica

2020 ◽  
Vol 3 (9) ◽  
pp. 1-7
Author(s):  
Mahesh Vastrad ◽  
M. Karthik ◽  
Varsha Dhanavandi ◽  
M. S. Shilpa
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Swelling Pressure ◽  
Liquid Limit ◽  
Geotechnical Properties ◽  
Black Cotton Soil ◽  
Building Structures ◽  
Nano Silica ◽  
Pavement Surface ◽  
Study Laboratory

Soil is known of their geotechnical properties and suitability as base, sub-based and sub-grade materials for road construction with the increase in population reduce the land availability. In current situation there is increasingly more development of structures and other structural building structures must be completed on less strength or poor soil. Black cotton soil is found in Madhya Pradesh, Karnataka, Maharashtra Andhra Pradesh & Tamilnadu covering an area of about 3.0 lakh sq. km in our nation. Black cotton soil is one of the largest soil stores of India, so for the reason need to increase its geotechnical properties and make it comfortable for the development reason. In pavement surface causes problems like cracking, rutting, patching, potholes and detoriation in the pavement surface. The development on black cotton soil (expansive soil) has consistently been a giving tough task for the specialists as the Road & structure laying on black cotton soil breaks without any notice. Stabilization of soil by GGBS couldn't just take care of the issue of appropriate stabilization of black cotton soil, yet in addition settle the issue of removal of a modern waste for example GGBS. The properties of black cotton soil can be modified by stabilizing the soil with the use of additives or stabilizers like Lime (6%), GGBS (30%) & Nano silica (0.3%, 0.6% & 0.9%). There is increase in various geotechnical properties like liquid limit, and plastic limit, compaction characteristics, unconfined compressive strength, CBR values and swelling pressure were determined. An experimental investigation is carried out to study the influence of admixture in soil with respect to the strength characteristics. In this comparative study laboratory tests such as Atterberg’s limit, Compaction test, swelling index and California Bearing Ratio (CBR)& Unconfined compressive strength (UCS)test were carried out for black cotton soil.  

Sign in / Sign up

Export Citation Format

Share Document