scholarly journals Spectral Efficiency Optimization for Full Duplex Multi-User MIMO Network

2020 ◽  
Vol 18 (12.2) ◽  
pp. 43
Author(s):  
Mai Thi Phuong Le ◽  
Hung Le Nguyen ◽  
Hieu Van Nguyen ◽  
Vien Duy Nhat Nguyen
Keyword(s):  
Spectral Efficiency ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Full Duplex ◽  
Zero Forcing ◽  
Transmit Power ◽  
Efficiency Optimization ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output

In this paper, we investigate the spectral efficiency (SE) of a multi-user multiple-input multiple-output (MU-MIMO) antenna network in full-duplex (FD) regime, where uplink (UL) and downlink (DL) users simultaneously share the same time and frequency resources. Zero-forcing approach is applied efficiently to precode/detect signals in both UL and DL. To achieve the SE maximization, we formulate an optimized problem where the transmit power of Base station (BS) and users are jointly considered. Numerical results are used to show that the proposed algorithm may bring significant SE gain over the previous approaches under realistic channel conditions.

scholarly journals Beam division multiple access for millimeter wave massive MIMO: Hybrid zero-forcing beamforming with user selection

2022 ◽  
Vol 12 (1) ◽  
pp. 445
Author(s):  
Hong Son Vu ◽  
Kien Truong ◽  
Minh Thuy Le
Keyword(s):  
Multiple Access ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Zero Forcing ◽  
Multiuser Interference ◽  
Novel Approach ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Promising Solution

<p>Massive multiple-input multiple-output (MIMO) systems are considered a promising solution to minimize multiuser interference (MUI) based on simple precoding techniques with a massive antenna array at a base station (BS). This paper presents a novel approach of beam division multiple access (BDMA) which BS transmit signals to multiusers at the same time via different beams based on hybrid beamforming and user-beam schedule. With the selection of users whose steering vectors are orthogonal to each other, interference between users is significantly improved. While, the efficiency spectrum of proposed scheme reaches to the performance of fully digital solutions, the multiuser interference is considerably reduced.</p>

scholarly journals Spectral Efficiency Improvement Techniques In Massive Mimo For 5G Communications

2021 ◽  
Vol 12 (2) ◽  
pp. 1457-1465
Author(s):  
Naraiah R , Et. al.
Keyword(s):  
Spectral Efficiency ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Broad Band ◽  
Cell System ◽  
Base Station ◽  
Information Rate ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Long Time

Wireless communications has gotten one of the quickest developing zones in our advanced life and makes colossal effect on practically every component of our day by day life. 5G should support a large number of new applications with a wide assortment of prerequisites, including higher pinnacle and client information rates, diminished dormancy, improved indoor inclusion, expanded number of gadgets, etc. The normal traffic development in at least a long time from now can be fulfilled by the consolidated utilization of more range, higher spectral efficiency, and densification of cells. The increment in spectral effectiveness will improve the throughput of the system which straightforwardly serves the Enhanced Mobile Broad band use instance of the 5G assistance. In massive Multiple-Input Multiple-Output (M-MIMO) systems few hundred quantities of antennas are conveyed at each base station (BS) to serve a moderately modest number of single-reception apparatus terminals with multiuser, giving higher information rate and lower idleness. Massive Multiple-Input Multiple-Output is the arising innovation in cell system for higher information rate correspondence. It utilizes enormous number of communicating reception apparatus at the base station which is made conceivable by the radio wire cluster which can be electronically steerable and adequately utilized for shaft framing. Spectral proficiency is the vital boundary to be improved in expanding throughput. The system execution under different commonsense limitations and conditions, for example, restricted soundness block length, number of base station (BS) antennas, and number of dynamic clients are assessed through simulation.  

scholarly journals Sectoral dual-polarized MIMO antenna for 5G-NR band N77 base station

2021 ◽  
Vol 21 (3) ◽  
pp. 1611
Author(s):  
Muhsin Muhsin ◽  
Afina Lina Nurlaili ◽  
Aulia Saharani ◽  
Indah Rahmawti Utami
Keyword(s):  
High Performance ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Mimo Antenna ◽  
Future Technology ◽  
New Radio ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Dual Polarized

<span>Massive internet of things (IoT) in 5G has many advantages as a future technology. It brings some challenges such as a lot of devices need massive connection. In this case, multiple-input multiple-output (MIMO) systems offer high performance and capacity of communications. There is a challenge of correlation between antennas in MIMO. This paper proposes three-sectors MIMO base station antenna for 5G-New Radio (5G-NR) band N77 with dual polarized configuration to reduce the correlation. The proposed antenna has a maximum coupling of -16.90 dB and correlation below 0.01. The obtained bit error rate (BER) performance is very close to non-correlated antennas with bandwidth of 1.87 GHz. It means that the proposed antenna has been well designed.</span>

scholarly journals Downlink Spectral Efficiency Analysis in Distributed Massive MIMO with Phase Noise

Electronics ◽  
2018 ◽  
Vol 7 (11) ◽  
pp. 317 ◽  
Author(s):  
Qian Lv ◽  
Jiamin Li ◽  
Pengcheng Zhu ◽  
Dongming Wang ◽  
Xiaohu You
Keyword(s):  
Phase Noise ◽  
Spectral Efficiency ◽  
Massive Mimo ◽  
Large Scale ◽  
Channel Model ◽  
Multiple Input Multiple Output ◽  
Base Station ◽  
Small Scale ◽  
Multiple Input ◽  
Input Multiple Output

To achieve the advantages provided by massive multiple-input multiple-output (MIMO), a large number of antennas need to be deployed at the base station. However, for the reason of cost, inexpensive hardwares are employed in the realistic scenario, which makes the system distorted by hardware impairments. Hence, in this paper, we analyze the downlink spectral efficiency in distributed massive MIMO with phase noise and amplified thermal noise. We provide an effective channel model considering large-scale fading, small-scale fast fading and phase noise. Based on the model, the estimated channel state information (CSI) is obtained during the pilot phase. Under the imperfect CSI, the closed-form expressions of downlink achievable rates with maximum ratio transmission (MRT) and zero-forcing (ZF) precoders in distributed massive MIMO are derived. Furthermore, we also give the user ultimate achievable rates when the number of antennas tends to infinity with both precoders. Based on these expressions, we analyze the impacts of phase noise on the spectral efficiency. It can be concluded that the same limit rate is achieved with both precoders when phase noise is present, and phase noise limits the spectral efficiency. Numerical results show that ZF outdoes MRT precoder in spectral efficiency and ZF precoder is more affected by phase noise.

scholarly journals Implementation of a Zero-Forcing Precoding Algorithm Combined with Adaptive Beamforming Based on WiMAX System

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Hyunwook Yang ◽  
Seungwon Choi
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Experimental System ◽  
Multiple Access Interference ◽  
Adaptive Beamforming ◽  
Base Station ◽  
Zero Forcing ◽  
Single Antenna ◽  
Input Multiple Output ◽  
Wimax System

We propose a novel precoding algorithm that is a zero-forcing (ZF) method combined with adaptive beamforming in the Worldwide Interoperability for Microwave Access (WiMAX) system. In a Multiuser Multiple-Input Multiple-Output (MU-MIMO) system, ZF is used to eliminate the Multiple Access Interference (MAI) in order to allow several users to share a common resource. The adaptive beamforming algorithm is used to achieve the desired SNR gain. The experimental system consists of a WiMAX base station that has 2 MIMO elements, each of which is composed of three-array antennas and two mobile terminals, each of which has a single antenna. Through computer simulations, we verified that the proposed method outperforms the conventional ZF method by at least 2.4 dB when the BER is 0.1%, or 1.7 dB when the FER is 1%, in terms of the SNR. Through a hardware implementation of the proposed method, we verified the feasibility of the proposed method for realizing a practical WiMAX base station to utilize the channel resources as efficiently as possible.

A companding approach for PAPR suppression in OFDM based massive MIMO system

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajay Kumar Yadav ◽  
Pritam Keshari Sahoo ◽  
Yogendra Kumar Prajapati
Keyword(s):  
Massive Mimo ◽  
Orthogonal Frequency Division Multiplexing ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Average Power ◽  
Base Station ◽  
Convex Optimization Problem ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mimo Ofdm

Abstract Orthogonal frequency division multiplexing (OFDM) based massive multiuser (MU) multiple input multiple output (MIMO) system is popularly known as high peak-to-average power ratio (PAPR) issue. The OFDM-based massive MIMO system exhibits large number of antennas at Base Station (BS) due to the use of large number of high-power amplifiers (HPA). High PAPR causes HPAs to work in a nonlinear region, and hardware cost of nonlinear HPAs are very high and also power inefficient. Hence, to tackle this problem, this manuscript suggests a novel scheme based on the joint MU precoding and PAPR minimization (PP) expressed as a convex optimization problem solved by steepest gradient descent (GD) with μ-law companding approach. Therefore, we develop a new scheme mentioned to as MU-PP-GDs with μ-law companding to minimize PAPR by compressing and enlarging of massive MIMO OFDM signals simultaneously. At CCDF = 10−3, the proposed scheme (MU-PP-GDs with μ-law companding for Iterations = 100) minimizes the PAPR to 3.70 dB which is better than that of MU-PP-GDs, (iteration = 100) as shown in simulation results.

Design of an interlocked four-port MIMO antenna for UWB automotive communications

2021 ◽  
pp. 1-8
Author(s):  
M. Saravanan ◽  
R. Kalidoss ◽  
B. Partibane ◽  
K. S. Vishvaksenan
Keyword(s):  
Multiple Input Multiple Output ◽  
Performance Estimation ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Peak Gain

Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

Sign in / Sign up

Export Citation Format

Share Document