scholarly journals EFFECT OF THREE-WHEELED VEHICLES ON THE CAPACITY OF A TRAFFIC STREAM

2021 ◽  
Vol 25 (Special) ◽  
pp. 3-165-3-173
Author(s):  
Sarah H. Abdulamer ◽  
◽  
Hamid A. Eedan ◽  

Due to the tremendous development of the number and types of vehicles and a large number of traffic congestions, the phenomenon of the spread of three-wheeled vehicles, which is characterized by ease of movement, has recently appeared in Iraq because of a small space it occupies for its movement. The increase in their numbers exceeds the number of heavy vehicles in most urban areas in Iraq. Therefore, the current study has been devoted to studying the effect of those vehicles with three tires using a simulation program that has been previously developed and has been calibrated to suit the normal sections where the characteristics of these vehicles were included in terms of speed and length. Different ratios were used, ranging from (0-15) % for the first lane only. Some general traffic characteristics were examined, such as velocity-flow and flow-density and density-velocity relationship. The results showed that the presence of this type of vehicle has a significant impact on reducing road efficiency and increasing traffic congestion. The study recommends that a particular lane with a width of 2m on both directions of the roads be designated for the movement of these vehicles and keep them away from interference in the traffic flow of other cars.

2009 ◽  
Vol 1 (1) ◽  
pp. 1-6
Author(s):  
Chen K.C. ◽  
Larry S.T.

The concept of Level of Service (LOS) is originated from the Highway Capacity Manual (HCM). LOS is a qualitative assessment of the operational performance of a roadway facility based on quantitative performance measures. Many transportation infrastructure funding decisions are based on LOS analysis, and LOS designations are intended to represent user-perceived quality of service. This study has been carried out to determine the LOS on different roads. The profile of study area is in Kuching, Sarawak where five roads with different characteristics and posted speed of urban multilane with 80km/hr and 70km/hr, suburban two-lane two-way with 90 km/hr and 80km/hr had been selected for the studies. Substantial numbers of inputs are required for the LOS analysis and determination based on HCM procedures. These inputs are: a long list of traffic volume collected in different peak hours; traffic composition such as proportion of heavy vehicles in traffic; geometric characteristics such as number of lanes, lane width, shoulder width, and approach grades. Results of the study showed that LOS in the urban multilane is still in satisfactory range with LOS ranging from C to D except for most of the traffic congestion cases in urban multilane at the traffic light junctions and roundabouts. However, LOS in the suburban two-lane two-way is only satisfying in the range of LOS E; hence multilane should be introduced in such cases. Recommendations such as to provide various or multitude modes of transportation needs should be introduced in urban area. Furthermore, a suitable and efficient hierarchy in road system should be provided in suburban areas before turning into urban areas.


Author(s):  
Rajesh Kumar Gupta ◽  
L. N. Padhy ◽  
Sanjay Kumar Padhi

Traffic congestion on road networks is one of the most significant problems that is faced in almost all urban areas. Driving under traffic congestion compels frequent idling, acceleration, and braking, which increase energy consumption and wear and tear on vehicles. By efficiently maneuvering vehicles, traffic flow can be improved. An Adaptive Cruise Control (ACC) system in a car automatically detects its leading vehicle and adjusts the headway by using both the throttle and the brake. Conventional ACC systems are not suitable in congested traffic conditions due to their response delay.  For this purpose, development of smart technologies that contribute to improved traffic flow, throughput and safety is needed. In today’s traffic, to achieve the safe inter-vehicle distance, improve safety, avoid congestion and the limited human perception of traffic conditions and human reaction characteristics constrains should be analyzed. In addition, erroneous human driving conditions may generate shockwaves in addition which causes traffic flow instabilities. In this paper to achieve inter-vehicle distance and improved throughput, we consider Cooperative Adaptive Cruise Control (CACC) system. CACC is then implemented in Smart Driving System. For better Performance, wireless communication is used to exchange Information of individual vehicle. By introducing vehicle to vehicle (V2V) communication and vehicle to roadside infrastructure (V2R) communications, the vehicle gets information not only from its previous and following vehicle but also from the vehicles in front of the previous Vehicle and following vehicle. This enables a vehicle to follow its predecessor at a closer distance under tighter control.


2021 ◽  
Vol 11 (5) ◽  
pp. 2057
Author(s):  
Abdallah Namoun ◽  
Ali Tufail ◽  
Nikolay Mehandjiev ◽  
Ahmed Alrehaili ◽  
Javad Akhlaghinia ◽  
...  

The use and coordination of multiple modes of travel efficiently, although beneficial, remains an overarching challenge for urban cities. This paper implements a distributed architecture of an eco-friendly transport guidance system by employing the agent-based paradigm. The paradigm uses software agents to model and represent the complex transport infrastructure of urban environments, including roads, buses, trolleybuses, metros, trams, bicycles, and walking. The system exploits live traffic data (e.g., traffic flow, density, and CO2 emissions) collected from multiple data sources (e.g., road sensors and SCOOT) to provide multimodal route recommendations for travelers through a dedicated application. Moreover, the proposed system empowers the transport management authorities to monitor the traffic flow and conditions of a city in real-time through a dedicated web visualization. We exhibit the advantages of using different types of agents to represent the versatile nature of transport networks and realize the concept of smart transportation. Commuters are supplied with multimodal routes that endeavor to reduce travel times and transport carbon footprint. A technical simulation was executed using various parameters to demonstrate the scalability of our multimodal traffic management architecture. Subsequently, two real user trials were carried out in Nottingham (United Kingdom) and Sofia (Bulgaria) to show the practicality and ease of use of our multimodal travel information system in providing eco-friendly route guidance. Our validation results demonstrate the effectiveness of personalized multimodal route guidance in inducing a positive travel behavior change and the ability of the agent-based route planning system to scale to satisfy the requirements of traffic infrastructure in diverse urban environments.


Aerospace ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 38
Author(s):  
Malik Doole ◽  
Joost Ellerbroek ◽  
Victor L. Knoop ◽  
Jacco M. Hoekstra

Large-scale adoption of drone-based delivery in urban areas promise societal benefits with respect to emissions and on-ground traffic congestion, as well as potential cost savings for drone-based logistic companies. However, for this to materialise, the ability of accommodating high volumes of drone traffic in an urban airspace is one of the biggest challenges. For unconstrained airspace, it has been shown that traffic alignment and segmentation can be used to mitigate conflict probability. The current study investigates the application of these principles to a highly constrained airspace. We propose two urban airspace concepts, applying road-based analogies of two-way and one-way streets by imposing horizontal structure. Both of the airspace concepts employ heading-altitude rules to vertically segment cruising traffic according to their travel direction. These airspace configurations also feature transition altitudes to accommodate turning flights that need to decrease the flight speed in order to make safe turns at intersections. While using fast-time simulation experiments, the performance of these airspace concepts is compared and evaluated for multiple traffic demand densities in terms of safety, stability, and efficiency. The results reveal that an effective way to structure drone traffic in a constrained urban area is to have vertically segmented altitude layers with respect to travel direction as well as horizontal constraints imposed to the flow of traffic. The study also makes recommendations for areas of future research, which are aimed at supporting dynamic traffic demand patterns.


Author(s):  
Taesung HWANG ◽  
Minho LEE ◽  
Chungwon LEE ◽  
Seungmo KANG

Large facilities in urban areas, such as storage facilities, distribution centers, schools, department stores, or public service centers, typically generate high volumes of accessing traffic, causing congestion and becoming major sources of greenhouse gas (GHG) emission. In conventional facility-location models, only facility construction costs and fixed transportation costs connecting customers and facilities are included, without consideration of traffic congestion and the subsequent GHG emission costs. This study proposes methods to find high-demand facility locations with incorporation of the traffic congestion and GHG emission costs incurred by both existing roadway traffic and facility users into the total cost. Tabu search and memetic algorithms were developed and tested with a conventional genetic algorithm in a variety of networks to solve the proposed mathematical model. A case study to determine the total number and locations of community service centers under multiple scenarios in Incheon City is then presented. The results demonstrate that the proposed approach can significantly reduce both the transportation and GHG emission costs compared to the conventional facility-location model. This effort will be useful for decision makers and transportation planners in the analysis of network-wise impacts of traffic congestion and vehicle emission when deciding the locations of high demand facilities in urban areas.


Author(s):  
Mohamed Fazil Mohamed Firdhous ◽  
B. H. Sudantha ◽  
Naseer Ali Hussien

Vehicular traffic has increased across all over the world especially in urban areas due to many reasons including the reduction in the cost of vehicles, degradation of the quality of public transport services and increased wealth of people. The traffic congestion created by these vehicles causes many problems. Increased environment pollution is one of the most serious negative effects of traffic congestion. Noxious gases and fine particles emitted by vehicles affect people in different ways depending on their age and present health conditions. Professionals and policy makers have devised schemes for better managing traffic in congested areas. These schemes suffer from many shortcomings including the inability to adapt to dynamic changes of traffic patterns. With the development of technology, new applications like Google maps help drivers to select less congested routes. But, the identification of the best route takes only the present traffic condition on different road segments presently. In this paper the authors propose a system that helps drivers select routes based on the present and expected environment pollution levels at critical points in a given area.


2018 ◽  
Vol 01 (02) ◽  
pp. 01-09
Author(s):  
Baig Farrukh ◽  
Sahito Noman ◽  
Bano Arsla ◽  

In developing countries, rapid urbanization has created an enormous pressure on land use, infrastructure and transportation. The fast growing ratio of motorized vehicles in urban areas is the main cause of environmental degradation. Almost 80% of the greenhouse gas emission is from vehicles in cities. In the city centers, on-street parking is considered the major cause of traffic congestion. The aim of this study was to evaluate the problems of on-street parking and disorderly parking at Central Business District (CBD) of Hyderabad city. The field survey methodology was adopted to perceive the current traffic problems in the city center and traffic count survey was carried out in both peak and off hours. The data was analyzed using descriptive statistics frequency analysis technique with the help of Statistical Package for the Social Sciences (SPSS). The findings revealed that increasing number of vehicles, on-street parking, improper parking, encroachment, inadequate parking space and poor condition of roads are the main causes of traffic congestion. The study bridges up the research gap of determining public views about on-street parking challenges in the context of Hyderabad, Pakistan and provides statistical results which may equally be adapted by policy makers and transportation planners in order to improve the traffic situation.


2020 ◽  
Vol 9 (1) ◽  
pp. 3458-3465
Author(s):  
T.D.C. Pushpakumara ◽  
◽  
U.L.P. Nimesh ◽  

Traffic congestion is an enormous problem at peak hours in western province. Existing transport system is not capable to overcome these complexity situations. Therefore, Srilankan government needs to find out different mode of transport to save time and money and finally economy of the country. In the past history, there was a rich water transportation system over the country. Specially, the western province has a well-distributed network of inland waterways, comprising of main rivers, streams, canals, lakes, and tanks. Most of the time, the existing waterways were used for freight transportation (timber, sand, brick, and tiles. compare to Public transportation. The study is to determine the efficient use of waterways for the public transportation focusing the travel time and fuel consumption. The existing water way network was map and find availability of other network connectivity using ArcGIS and Google Earth Pro software. Then compare it with an existing public transportation mode (bus) and checked the suitability of usage of water transportation as an alternative to reduce the existing traffic congestion problem. And proposed water way transport system, that capable of potential and strategic way to reduce the traffic congestion problem in Colombo and its sub urban areas.


Author(s):  
Onur Dogan ◽  
Omer Faruk Gurcan

In recent years, enormous amounts of digital data have been generated. In parallel, data collection, storage, and analysis technologies have developed. Recently, there has been an increasing trend of people moving towards urban areas. By 2030 more than 60% of the world's population will live in an urban environment. Urban areas are big data resource because they include millions of citizens, technological devices, and vehicles which generate data continuously. Besides, rapid urbanization brings many challenges, such as environmental pollution, traffic congestion, health problems, energy management, etc. Some policies for countries are required to cope with urbanization problems. One of these policies is to build smart cities. Smart cities integrate information and communication technology and various physical devices connected to the network (the internet of things or IoT) to both improve the quality of government services and citizen welfare. This chapter presents a literature review of big data, smart cities, IoT, green-IoT concepts, using technology and methods, and applications worldwide.


Sign in / Sign up

Export Citation Format

Share Document