Submicron Simultaneous IR and Raman Spectroscopy (IR+Raman): Breakthrough Developments in Optical Photothermal IR (O-PTIR) Combined for Enhanced Failure Analysis

2019 ◽  
Author(s):  
Jay Anderson ◽  
Mustafa Kansiz ◽  
Michael Lo ◽  
Curtis Marcott
Keyword(s):  
Raman Spectroscopy ◽  
Failure Analysis ◽  
Data Quality ◽  
Raman Spectra ◽  
Spatial Resolution ◽  
Far Field ◽  
Field Mode ◽  
Microscopic Scale ◽  
Analytical Tools ◽  
Ir And Raman

Abstract Failure analysis of organics at the microscopic scale is an increasingly important requirement, with traditional analytical tools such as FTIR and Raman microscopy, having significant limitations in either spatial resolution or data quality. We introduce here a new method of obtaining Infrared microspectroscopic information, at the submicron level in reflection (far-field) mode, called Optical-Photothermal Infrared (O-PTIR) spectroscopy, that can also generate simultaneous Raman spectra, from the same spot, at the same time and with the same spatial resolution. This novel combination of these two correlative techniques can be considered to be complimentary and confirmatory, in which the IR confirms the Raman result and vice-versa, to yield more accurate and therefore more confident organic unknowns analysis.

Enhanced Failure Analysis (FA) of Organic Contamination Using Submicron Simultaneous IR and Raman Spectroscopy: Breakthrough Developments of Optical Photothermal IR (O-PTIR)

2020 ◽  
Author(s):  
D. Jay Anderson ◽  
Mustafa Kansiz ◽  
Michael Lo ◽  
Eoghan Dillon ◽  
Curtis Marcott
Keyword(s):  
Raman Spectroscopy ◽  
Failure Analysis ◽  
Semiconductor Manufacturing ◽  
Rapid Identification ◽  
Organic Contamination ◽  
Premature Failure ◽  
Specific Element ◽  
Ir And Raman Spectroscopy ◽  
Semiconductor Manufacturer ◽  
Ir And Raman

Abstract Rapid identification of organic contamination in the semi and semi related industry is a major concern for research and manufacturing. Organic contamination can affect a system or subsystem’s performance and cause premature failure of the product. As an example, in February 2019 the Taiwan Semiconductor Manufacturing Company (TMSC), a major semiconductor manufacturer, reported that a photoresist it used included a specific element which was abnormally treated, creating a foreign polymer in the photoresist resulting in an estimated loss of $550M [1].

scholarly journals Nanoscale Spatial Resolution in Far-Field Raman Imaging Using Hyperspectral Unmixing in Combination with Positivity Constrained Super-Resolution

2020 ◽  
Vol 74 (7) ◽  
pp. 780-790
Author(s):  
Dominik J. Winterauer ◽  
Daniel Funes-Hernando ◽  
Jean-Luc Duvail ◽  
Saïd Moussaoui ◽  
Tim Batten ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Spatial Resolution ◽  
Single Channel ◽  
Near Field ◽  
Resolution Enhancement ◽  
Super Resolution ◽  
Resolving Power ◽  
Far Field ◽  
Hyperspectral Unmixing ◽  
Better Than

This work introduces hyper-resolution (HyRes), a numerical approach for spatial resolution enhancement that combines hyperspectral unmixing and super-resolution image restoration (SRIR). HyRes yields a substantial increase in spatial resolution of Raman spectroscopy while simultaneously preserving the undistorted spectral information. The resolving power of this technique is demonstrated on Raman spectroscopic data from a polymer nanowire sample. Here, we demonstrate an achieved resolution of better than 14 nm, a more than eightfold improvement on single-channel image-based SRIR and [Formula: see text] better than regular far-field Raman spectroscopy, and comparable to near-field probing techniques.

scholarly journals Quantitative and Qualitative Analysis of Some Inorganic Compounds by Raman Spectroscopy

1994 ◽  
Vol 48 (7) ◽  
pp. 875-883 ◽  
Author(s):  
Daniel R. Lombardi ◽  
Chao Wang ◽  
Bin Sun ◽  
Augustus W. Fountain ◽  
Thomas J. Vickers ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Raman Spectroscopy ◽  
Qualitative Analysis ◽  
Raman Spectra ◽  
Solid Phase ◽  
Inorganic Compounds ◽  
Core Material ◽  
Storage Tanks ◽  
Hanford Site ◽  
Sampling Probe

Raman spectra have been measured for a number of nitrates, nitrites, sulfates, ferrocyanides, and ferricyanides, both in the solid phase and in aqueous solution. Accurate locations of peak maxima are given. Limits of detection for some of the compounds are given for solutions and for solid mixtures in NaNO3. Preliminary measurements have been made on core material recovered from the storage tanks on the Hanford site in Richland, Washington. Representative spectra are presented, showing that it is possible to observe responses of individual components from measurements made directly on untreated cores, with the use of a fiberoptic sampling probe.

Molecular structure analysis of ascending aorta aneurysm upon atherosclerosis

2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
I Mamarelis ◽  
V Mamareli ◽  
M Kyriakidou ◽  
O Tanis ◽  
C Mamareli ◽  
...  
Keyword(s):  
Molecular Structure ◽  
Raman Spectra ◽  
Molecular Level ◽  
Ascending Aorta ◽  
Ir And Raman Spectra ◽  
Aggregate Formation ◽  
Aorta Aneurysm ◽  
Ft Ir ◽  
Molecular Structure Analysis ◽  
Ir And Raman

Abstract Background The atherosclerotic ascending aorta could represent a potential source of emboli or could be an indicator of atherosclerosis in general with high mortality. The mechanism of aneurysm formation and atherosclerosis of the ascending aorta at the molecular level has not yet been clarified. To approach the mechanism of ascending aortic lesions and mineralization at a molecular level, we used the non-destructive FT-IR, Raman spectroscopy, SEM and Hypermicroscope. Methods Six ascending aorta biopsies were obtained from patients who underwent aortic valve replacement (AVR) cardiac surgery. CytoViva (einst inc) hyperspectral microscope was used to obtain the images of ascending aorta. The samples were dissolved in hexane on a microscope glass plate. The FT-IR and Raman spectra were recorded with Nicolet 6700 thermoshintific and micro-Raman Reinshaw (785nm, 145 mwatt), respectively. The architecture of ascending aorta biopsies was obtained by using scanning electron microscope (SEM of Fei Co) without any coating. Results FT-IR and Raman spectra showed changes arising from the increasing of lipophilic environment and aggregate formation (Fig. 1). The band at 1744 cm–1 is attributed to aldehyde CHO mode due to oxidation of lipids. The shifts of the bands of the amide I and amide II bands to lower are associated with protein damage, in agreement with SEM data. The bands at about 1170–1000 cm–1 resulted from the C-O-C of advanced glycation products as result of connecting tissues fragmentations and polymerization. The spectroscopic data were analogous with the lesions observed with SEM and hypermicroscopic images. Conclusions The present innovate molecular structure analysis showed that upon ascending aorta aneurysm development an excess of lipophilic aggregate formation and protein lesions, changing the elasticity of the aorta's wall. The released Ca2+ interacted mostly with carbonate-terminal of cellular protein chains accelerated the ascending aorta calcifications. Figure 1. FT-IR and Raman spectra Funding Acknowledgement Type of funding source: None

scholarly journals Indication of high lipid content in epithelial-mesenchymal transitions of breast tissues

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Siti Norbaini Sabtu ◽  
S. F. Abdul Sani ◽  
L. M. Looi ◽  
S. F. Chiew ◽  
Dharini Pathmanathan ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Raman Spectroscopy ◽  
Multivariate Analysis ◽  
Nucleic Acids ◽  
Raman Spectra ◽  
Cancer Progression ◽  
Component Analysis ◽  
Breast Cancer Tissue ◽  
Metabolic Changes ◽  
Cancer Tissue

AbstractThe epithelial-mesenchymal transition (EMT) is a crucial process in cancer progression and metastasis. Study of metabolic changes during the EMT process is important in seeking to understand the biochemical changes associated with cancer progression, not least in scoping for therapeutic strategies aimed at targeting EMT. Due to the potential for high sensitivity and specificity, Raman spectroscopy was used here to study the metabolic changes associated with EMT in human breast cancer tissue. For Raman spectroscopy measurements, tissue from 23 patients were collected, comprising non-lesional, EMT and non-EMT formalin-fixed and paraffin embedded breast cancer samples. Analysis was made in the fingerprint Raman spectra region (600–1800 cm−1) best associated with cancer progression biochemical changes in lipid, protein and nucleic acids. The ANOVA test followed by the Tukey’s multiple comparisons test were conducted to see if there existed differences between non-lesional, EMT and non-EMT breast tissue for Raman spectroscopy measurements. Results revealed that significant differences were evident in terms of intensity between the non-lesional and EMT samples, as well as the EMT and non-EMT samples. Multivariate analysis involving independent component analysis, Principal component analysis and non-negative least square were used to analyse the Raman spectra data. The results show significant differences between EMT and non-EMT cancers in lipid, protein, and nucleic acids. This study demonstrated the capability of Raman spectroscopy supported by multivariate analysis in analysing metabolic changes in EMT breast cancer tissue.

Characterisation of essential oil plants from Turkey by IR and Raman spectroscopy

2005 ◽  
Vol 39 (2) ◽  
pp. 249-256 ◽  
Author(s):  
Hartwig Schulz ◽  
Gülcan Özkan ◽  
Malgorzata Baranska ◽  
Hans Krüger ◽  
Musa Özcan
Keyword(s):  
Raman Spectroscopy ◽  
Essential Oil ◽  
Ir And Raman Spectroscopy ◽  
Ir And Raman

Synthesis and Characterization of Tris(trimethyltin) Thiophosphate (Me3Sn)3PO3S

1993 ◽  
Vol 48 (12) ◽  
pp. 1781-1783 ◽  
Author(s):  
Abdel-Fattah Shihada
Keyword(s):  
Aqueous Medium ◽  
Raman Spectra ◽  
Mass Spectra ◽  
Ir And Raman Spectra ◽  
Synthesis And Characterization ◽  
Polymeric Structure ◽  
Ir And Raman

(Me3Sn)3PO3S has been prepared from the reaction of Me3SnCl with Na3PO3S • 12 H2O under cooling in aqueous medium. Its IR and Raman spectra are found to be consistent with a polymeric structure with tetra- and penta-coordinated tin atoms. The 31P NMR and mass spectra of (Me3Sn)3PO3S are reported and discussed.

Application of Raman Spectroscopy to the Study of Adsorption Effects at Liquid-Solid Interfaces

1982 ◽  
Vol 36 (4) ◽  
pp. 471-473 ◽  
Author(s):  
Klaus Witke
Keyword(s):  
Raman Spectroscopy ◽  
Carbon Tetrachloride ◽  
Adsorption Isotherm ◽  
Minimal Surface ◽  
Linear Relationship ◽  
Surface Area ◽  
Long Range ◽  
Raman Spectra ◽  
Sample Cell ◽  
Minimal Surface Area

A sample cell for investigating suspensions or emulsions by Raman spectroscopy in the optically favorable 90° scattering arrangement is described. The Raman spectra of pyridine in a suspension of Aerosil 200 in carbon tetrachloride are recorded. The adsorption isotherm of pyridine is determined from the intensities of the Raman lines at 1008 and 990 cm−1. Over a long range of coverage a linear relationship exists between reciprocal concentrations of chemisorbed and dissolved molecules. The minimal surface area that is occupied by a chemisorbed molecule is determined to be approximately 0.75 nm2.

Raman Spectra of Ion Implanted Graphite

1981 ◽  
Vol 7 ◽  
Author(s):  
B.S. Elman ◽  
H. Mazurek ◽  
M.S. Dresselhaus ◽  
G. Dresselhaus
Keyword(s):  
Raman Spectroscopy ◽  
Ion Implantation ◽  
Raman Spectra ◽  
Annealing Temperature ◽  
Annealing Process ◽  
Lattice Order ◽  
Annealing Temperatures ◽  
High Fluences ◽  
Lattice Damage ◽  
The Way

ABSTRACTRaman spectroscopy is used in a variety of ways to monitor different aspects of the lattice damage caused by ion implantation into graphite. Particular attention is given to the use of Raman spectroscopy to monitor the restoration of lattice order by the annealing process, which depends critically on the annealing temperature and on the extent of the original lattice damage. At low fluences the highly disordered region is localized in the implanted region and relatively low annealing temperatures are required, compared with the implantation at high fluences where the highly disordered region extends all the way to the surface. At high fluences, annealing temperatures comparable to those required for the graphitization of carbons are necessary to fully restore lattice order.

Sign in / Sign up

Export Citation Format

Share Document