The Role of Composites for Sustainable Society and Industry

2021 ◽  
Vol 1 (2) ◽  
pp. 48-53
Author(s):  
Ragil Widyorini ◽  
Nasmi Herlina Sari ◽  
Muji Setiyo ◽  
Gunawan Refiadi
Keyword(s):  
Natural Fiber ◽  
Low Cost ◽  
Wood Fiber ◽  
Natural Fibers ◽  
Reinforced Composites ◽  
Sustainable Society ◽  
Environmental Friendliness ◽  
Co2 Gas ◽  
Modular Structures

In the last few decades, the global community's demands are getting stronger for more environmentally friendly materials. Natural fiber reinforced composites have been applied as reinforcement in concrete, sound absorbers, buildings, aeronautical, aerospace, sanitation, electronics, bridge decks, interior, automotive, sports equipment and furniture industries, modular structures, and others. Natural fibers are receiving high attention due to their sustainability, environmental friendliness, low density, low cost, low abrasiveness, renewability, and biodegradability, as well as contributing to the consumption of CO2 gas. As reported by many researchers, Indonesia has several natural resources for natural fibers such as bark fiber, leaf fiber, seed/fruit fiber, grass fiber, stalk fiber, and wood fiber.

Buckling analysis of natural fiber reinforced composites

2021 ◽  
Vol 7 (2) ◽  
pp. 58
Author(s):  
Celal Çakıroğlu ◽  
Gebrail Bekdaş
Keyword(s):  
Composite Plate ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Experimental Studies ◽  
Fiber Reinforced Composites ◽  
Fiber Types ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Element Analysis

In the recent years natural fiber reinforced composites are increasingly receiving attention from the researchers and engineers due to their mechanical properties comparable to the conventional synthetic fibers and due to their ease of preparation, low cost and density, eco-friendliness and bio-degradability. Natural fibers such as kenaf or flux are being considered as a viable replacement for glass, aramid or carbon. Extensive experimental studies have been carried out to determine the mechanical behavior of different natural fiber types such as the elastic modulus, tensile strength, flexural strength and the Poisson’s ratio. This paper presents a review of the various experimental studies in the field of fiber reinforced composites while summarizing the research outcome about the elastic properties of the major types of natural fiber reinforced composites. Furthermore, the performance of a kenaf reinforced composite plate is demonstrated using finite element analysis and results are compared to a glass fiber reinforced laminated composite plate.

Machining parametric study on the natural fiber reinforced composites: A review

2021 ◽  
pp. 095440622110637
Author(s):  
Vijay Kumar Mahakur ◽  
Sumit Bhowmik ◽  
Promod Kumar Patowari
Keyword(s):  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Machining Processes ◽  
Industrial Sectors ◽  
The Matrix ◽  
Input Variables

Nowadays, the utilization of natural fiber reinforced composite has increased frequently. These natural fibers have significant features like low cost, renewable, and, more importantly, biodegradable in nature, making them to be utilized for various industrial sectors. However, the massive demand for natural fiber reinforced composites (NFRC), forces them to be machined and operated, which is required for countless areas in multiple industries like automotive, marine, aerospace and constructions. But before obtaining the final shape of any specimen, this specimen should come across numerous machining processes to get the desired shape and structure. Therefore, the present review paper focused on the various aspects during conventional and unconventional machining of the NFRC. It covers the work by exploring the influence of all input variables on the outcome produced after machining the NFRC. Various methodologies and tools are also discussed in this article for reducing the machining defects. The machining of the NFRC is found as a challenging task due to insufficient interlocking between the matrix and fibers, and minimum knowledge in machining characteristics and appropriate input parameters. Thus, this review is trying to assist the readers to grasp a basic understanding and information during the machining of the NFRC in every aspect.

The Influence of Fiber Processing and Alkaline Treatment on the Properties of Natural Fiber-reinforced Composites: A Review

2021 ◽  
Author(s):  
Keagisitswe Setswalo ◽  
Namoshe Molaletsa ◽  
Oluseyi Philip Oladijo ◽  
Esther Titilayo Akinlabi ◽  
Mavinkere Rangappa Sanjay ◽  
...  
Keyword(s):  
Natural Fiber ◽  
Natural Fibers ◽  
Processing Parameters ◽  
Alkaline Treatment ◽  
Fiber Reinforced Composites ◽  
Processing Temperature ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Environmental Friendliness ◽  
Fiber Processing

Throughout generations, research on natural fiber-reinforced composites (NFRCs) has been growing and yielding promising results. The notion of blending natural fibers with polymers comes from the composite’s suitable properties, not limited to low density, availability at a low price, biodegradability, and environmental friendliness. The quest for high-performing and marketable NFRCs is driving innovation in the synthesis of such materials. A suitable combination of parameters that optimizes the mechanical and functional properties of the composites without increasing the cost of production is desired. The main objective of this review is to evaluate some of the parameters that influence the behavior and properties of NFRCs. The influence of alkaline modification and natural fiber processing parameters, such as particle size, modification concentration, soaking duration, processing temperature, fiber-to-polymer ratio, and adoption of additives, on composites are discussed. This review summarizes some of the work and provides some directions in the search of an all-around performing economic NFRC.

Information in United States Patents on works related to ‘Natural Fibers’: 2000-2018

2019 ◽  
Vol 12 (1) ◽  
pp. 4-76 ◽  
Author(s):  
Krittirash Yorseng ◽  
Mavinkere R. Sanjay ◽  
Jiratti Tengsuthiwat ◽  
Harikrishnan Pulikkalparambil ◽  
Jyotishkumar Parameswaranpillai ◽  
...  
Keyword(s):  
United States ◽  
Composite Materials ◽  
Natural Fiber ◽  
Comprehensive Evaluation ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Macro Scale ◽  
Structural Applications

Background: This era has seen outstanding achievements in materials science through the advances in natural fiber-based composites. The new environmentally friendly and sustainability concerns have imposed the chemists, biologists, researchers, engineers, and scientists to discover the engineering and structural applications of natural fiber reinforced composites. Objective: To present a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials. Methods: The patent data have been taken from the external links of US patents such as IFI CLAIMS Patent Services, USPTO, USPTO Assignment, Espacenet, Global Dossier, and Discuss. Results: The present world scenario demands the usage of natural fibers from agricultural and forest byproducts as a reinforcement material for fiber reinforced composites. Natural fibers can be easily extracted from plants and animals. Recently natural fiber in nanoscale is preferred over micro and macro scale fibers due to its superior thermo-mechanical properties. However, the choice of macro, micro, and nanofibers depends on their applications. Conclusion: This document presents a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials.

Study on Thermal, Thermo-Mechanical, and Flexural Properties of Jute Fiber Surface Modification and Its Reinforced Composite

2021 ◽  
Vol 8 (5) ◽  
pp. 11-17
Author(s):  
Syed Rashedul Islam ◽  
Abeer Alassod ◽  
Mohammed Kayes Patoary ◽  
Tayyab Naveed ◽  
Md Arshad Ali ◽  
...  
Keyword(s):  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Surface ◽  
Jute Fiber ◽  
Flexural Properties ◽  
Reinforced Composites ◽  
Acid Pretreatment ◽  
Chemical Treatments ◽  
Jute Fibers ◽  
Composite Properties

In recent years, reinforced composites from biodegradable and natural fibers have a worldwide scope for advanced applications. However, the core limitation of natural fiber reinforced composites are poor consistency among supporting fibers and the matrix. Therefore, optimal structural performance of fibers and matrix is desirable. In this study, chemical treatments (i.e., alkali pretreatment, acid pretreatment, and scouring) were applied to jute fibers for improvement of composite properties. Thermal, thermo-mechanical, and flexural properties, and surface morphology, of untreated and treated jute fibers were studied on the treated fibers. Jute fiber/epoxy composite properties were analyzed by thermogravimetric analysis (TGA), flexural strength and modulus, and dynamic mechanical analysis (DMA). The chemical treatments had a significant impact on the properties of jute fiber composites.

A Review of Recent Developments in Natural Fiber Composites and their Mechanical, Thermal & Machinabilty Properties

2018 ◽  
Vol 1148 ◽  
pp. 61-71 ◽  
Author(s):  
V. Joshua Jaya Prasad ◽  
Puli Suresh Kumar
Keyword(s):  
Exponential Growth ◽  
Power Plants ◽  
Natural Fiber ◽  
Low Cost ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Light Weight ◽  
Natural Fiber Composites ◽  
Research And Innovation ◽  
Recent Developments

Recently, there has been an exponential growth in research and innovation in the natural fiber composites (NFC) due to their diversified applications in the field of engineering. Biodegradability, light weight, formability and availability at low cost are the attractive merits of the natural fibers. Mechanical, Thermal and Machinabilty properties of Natural fiber composites have their own advantage and adoptability in the field of automobile, power plants, aeronautical, defense and naval applications. This review aims to provide an overview of the comparison of differ types of Natural fiber composites, factors that affect the mechanical, thermal and machinabilty of NFCs and their engineering applications.

Natural Fiber Reinforced Synthetic Polymer Composites

2019 ◽  
Vol 23 ◽  
pp. 6-30
Author(s):  
Volkan Uğraşkan ◽  
Abdullah Toraman ◽  
A. Binnaz Hazar Yoruç
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Thermal And Mechanical Properties ◽  
Fiber Reinforced ◽  
Promising Alternative ◽  
Alternative Sources

In early composite materials, the use of petroleum based fibers such as glass and carbon fibers, aramid etc. was common. In order to reduce the dependency on petroleum based sources and environmental pollution, researchers have focused on the search for alternative sources. Natural fibers are abundant, recyclable and biodegradable plant derived materials. Besides, thanks to good physical, thermal and mechanical properties, natural fibers become promising alternative for composites. This review includes information about natural fiber reinforced composites’ components, manufacturing methods, mechanical properties and applications.

Machinability of hybrid natural fiber reinforced composites with cellulose micro filler incorporation

2020 ◽  
Vol 54 (24) ◽  
pp. 3655-3671 ◽  
Author(s):  
KR Sumesh ◽  
K Kanthavel ◽  
V Kavimani
Keyword(s):  
Natural Fiber ◽  
Natural Fibers ◽  
Machining Process ◽  
Reinforced Composites ◽  
Compression Moulding ◽  
Hybrid Fibers ◽  
Electron Microscopy Analysis ◽  
Kerf Angle ◽  
Current Scenario ◽  
Microscopy Analysis

In the current scenario, the applications of natural fibers are increasing enormously due to their biodegradability, low-density and better mechanical properties. This research explains the machining nature of pineapple (P) and flax (F) fibers by the incorporation of cellulose micro filler (CMF). These epoxy-based composites were manufactured using compression moulding. In the machining process using abrasive water jet machining (AWJM), lower kerf angle of 1.31° and surface roughness of 5.1 µm were observed in 30% PF/2% cellulose micro filler hybrid epoxy combination. Agglomeration at higher filler incorporation causes decrease in machinability of hybrid 30% PF. Pineapple and flax hybrid fibers with 30 and 35 wt % showed better machinability at 2 and 3% cellulose micro filler addition. Scanning electron microscopy analysis after machining process showed reduction in flush off and pullouts of fiber by improved compaction with the epoxy matrix due to filler addition.

scholarly journals Performance of lightweight mortar reinforced with doum palm fiber

2020 ◽  
pp. 002199832097519
Author(s):  
Fatma Naiiri ◽  
Allègue Lamis ◽  
Salem Mehdi ◽  
Zitoune Redouane ◽  
Zidi Mondher
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Natural Fiber ◽  
Cement Mortar ◽  
Low Cost ◽  
Natural Fibers ◽  
Construction Materials ◽  
Mechanical And Thermal Properties ◽  
Palm Fiber ◽  
And Control

Natural fibers are increasingly used in composites because of their low cost and good mechanical properties. Cement reinforced with natural fibersis contemplates as a new generation of construction materials with superior mechanical and thermal performance. This study of three sizes’effect of Doum palm fiber explores the mortar’s behavior reinforced with different fiber ratio. The aim is to determine the optimal addition to improve mechanical and thermal properties of natural fiber reinforced cements. Physical, mechanical and thermal properties of composite are examined. Tensile properties of Doum fibers are verified to determine their potential as reinforced material. Findings prove that the use of alkali-treated Doum fiber as reinforcement in cement mortar composite leads to the upgrading of the mechanical properties including thermo-physical properties against composites reinforced with raw fibers and control cement mortars. While, the compression and flexural strength of the cement mortar reinforced with alkali-treated Doum fiber with diameter 0.3 mm (CT3) are metered to be 11.11 MPa, 5.22 MPa, respectively for fiber content 0.5%. Additionally, based on thermo-physical tests, it is assessed that the thermal conductivity and diffusivity decrease for cement mortar reinforced with Doum fiber with diameter 0.2 mm (CT2).

scholarly journals Millettia pinnata: a study on the extraction of fibers and reinforced composites

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
P. B. Mohankumara ◽  
Shraddha Prashant Thakare ◽  
Vijaykumar Guna ◽  
G. R. Arpitha
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Compositional Analysis ◽  
Morphological Properties ◽  
Reinforced Composites ◽  
Polypropylene Composites ◽  
Wide Range ◽  
Millettia Pinnata

AbstractIn this work, the potential for using Millettia pinnata stalk for extracting cellulosic natural fibers and its subsequent use in reinforced composites was studied. The extracted fibers were characterized for its composition, mechanical, thermal stability and morphological properties. Compositional analysis showed that the fibers possessed 54% cellulose, 12% hemicellulose, 15% lignin and 11% ash. The tensile strength of the fiber was 310 MPa, which is comparable to cotton and linen. The tensile strength of the M. pinnata fiber-reinforced polypropylene composites was 17.96 MPa which was similar to other natural fiber-based composites. M. pinnata fibers appear promising for a wide range of applications including textiles and other typical composites applications.

Sign in / Sign up

Export Citation Format

Share Document