Effectiveness of Flood Protection Project Valuation Methods

2015 ◽  
Vol 10 (3) ◽  
pp. 275-289
Author(s):  
Tadeusz Liziński ◽  
Marcin Bukowski ◽  
Anna Wróblewska

Projects for flood protection are increasingly the subject of investment projects in the field of water management. This is related to the increasing frequency of worldwide threats caused by extreme weather conditions, including extremely high rainfall causing floods. Technical and nontechnical flood protection measures are also increasing in importance. In the decision-making process, it is necessary to take into account both the costs and benefits of avoiding losses, including an analysis of social benefits, whose valuation of non-market goods is an essential element. A comprehensive account of projects in the field of flood protection based on the estimated costs and benefits of the investment allows the economic efficiency from a general social point of view to be determined. Previous evaluations of the effectiveness of investment projects have mainly taken into account only categories and market values. The aim of the article is to identify the possibilities to expand the values of non-market assessments and categories formulated on the basis of the theoretical economics of the environment. 

2018 ◽  
Vol 211 ◽  
pp. 12002
Author(s):  
Paula Couto ◽  
Filipa Salvado ◽  
Maria João falcão Silva

The decision to intervene in Railway Infrastructures (RI) in a sustainable way is complex, because the involved costs require different assessment levels, given their relevance to all stakeholders in decision-making, and are not always easily quantifiable. Following recent decisions of the EU, it is urgent to carry studies to support RI sustainable interventions. In this context, the use of methodologies based on Cost-Benefit Analysis (CBA) contributes positively to base decisions on RI investment projects. CBA is a methodology to assess the net economic impact of a public investment project and can be used for a variety of interventions. CBA is based on the conversion to monetary values of all costs and benefits, even when they are intangible. The purpose of a CBA is to evaluate if a project is feasible from the point of view of social welfare through the algebraic sum of their costs and benefits discounted over time. This paper presents a framework for the assessment of RI sustainable projects based on CBA, which integrates the development of community policies and financial instruments. It aims to provide technical support and contribute to the reflection about co-financing rates modulation.


2021 ◽  
Vol 1203 (3) ◽  
pp. 032094
Author(s):  
Andrej Šoltész ◽  
Jakub Mydla ◽  
Peter Leško ◽  
Richard Honti

Abstract The goal of the contribution is to analyse and review the possibilities of flood protection in hydrological, morphological and geological conditions of the East Slovak Lowland, specifically the flood protection of the county city Trebišov. The flood situation is caused very often by the Trnávka stream flowing along the city. The analysis was performed by mathematical modelling using HEC-RAS software. Based on Trnávka drainage basin reconnaissance, own measurements in situ and study literature relating thereto a proposal of several technical measures for safe run-off in the Trnávka river bed has been elaborated and consequently evaluated from hydraulic point of view.


1976 ◽  
Vol 15 (05) ◽  
pp. 246-247
Author(s):  
S. C. Jain ◽  
G. C. Bhola ◽  
A. Nagaratnam ◽  
M. M. Gupta

SummaryIn the Marinelli chair, a geometry widely used in whole body counting, the lower part of the leg is seen quite inefficiently by the detector. The present paper describes an attempt to modify the standard chair geometry to minimise this limitation. The subject sits crossed-legged in the “Buddha Posture” in the standard chair. Studies with humanoid phantoms and a volunteer sitting in the Buddha posture show that this modification brings marked improvement over the Marinelli chair both from the point of view of sensitivity and uniformity of spatial response.


2003 ◽  
Vol 42 (2) ◽  
pp. 170-172
Author(s):  
Mir Annice Mahmood

To implement any successful policy, research about the subject-matter is essential. Lack of knowledge would result in failure and, from an economic point of view, it would lead to a waste of scarce resources. The book under review is essentially a manual which highlights the use of research for development. The book is divided into two parts. Part One informs the reader about concepts and some theory, and Part Two deals with the issue of undertaking research for development. Both parts have 11 chapters each. Chapter 1 asks the basic question: Is research important in development work? The answer is that it is. Research has many dimensions: from the basic asking of questions to the more sophisticated broad-based analysis of policy issues. The chapter, in short, stresses the usefulness of research which development workers ignore at their own peril.


2020 ◽  
Vol 15 (1-3) ◽  
pp. 44-59
Author(s):  
Lidia Peneva

Crimes against marriage and family are a particular group of social relation­ships that the law has defended properly in view of the high public significance and value they enjoy. At the moment they are regulated in Chapter VI, Section I, of the specific part of the Penal Code the Repub­lic of Bulgaria. The subject matter of this Statement will, however, be the legisla­tive provisions concerning these criminal­ized acts in retrospect. The purpose of the study is to show by historical method and through the comparatively legal method the development of these criminal groups during the periods of various criminal laws in Bulgaria. This will also provide a basis for reflection on possible de lege ferenda proposals. This report from a structural point of view will be divided into three distinct points, marking each of the penal laws in the Republic of Bulgaria, which were in force before 1968.


Author(s):  
Yu.V. Kupriyanova ◽  
I.M. Vasilyanova

The article summarizes the key points in the development of the metadialogue phenomenon from a linguistic point of view. Some stages of the development of this concept and the difficulties associated with its structuring are covered. The main research findings of modern foreign and domestic experts on its study are considered. Some characteristics of the subject of the research from the standpoint of various pragmatic installations are given. On the basis of the dynamic structure of the metadialogue development, certain principles of semantic relations connected with the dialectical nature of human cognition are presented. Excursion into the history and evolution of the concept is presented. Several types of formulation of the subject matter are given. In accordance with the goal of speech exposure, internal problems of the development of metadialogue are highlighted and the critical points related to solving these problems are described. The rules of metadialogue flow are explained at the level of steps, the success/failure of which directly affects the final result of communication. The prospects of development of the concept research in accordance with various types of discourse are indicated.


1992 ◽  
Vol 9 (2) ◽  
pp. 202-218 ◽  
Author(s):  
M. Ramzan Akhtar

IntroductionIslamic teachings envisage a balanced society achieved through thefunctioning of Islamic institutions. This paper visualizes three main institutions:ukhiwah, ‘adl, and ihsan. Ukhuwah (brotherhood) promotes the bonds ofbrotherhood, and ‘adl (justice) enforces a system of individual and socialobligations. Islam stresses the importance of meeting one’s obligations, becauseeach obligation has its corresponding right. Thus, an individual’s effort to meethidher obligations leads to the fulfillment of everyone’s rights. This does notmean that Islam forbids one from demanding hidher rights, even though thisdemand does pose a problem related to human nature: an individual wants his/herrights and also some part of another person’s rights. Therefore, one group’sdemand for its rights tends to encroach upon the rights of another group, whichcauses social friction and disorder. The institution of ihsan (benevolence) goesone step further: it exhorts individuals to forego their rights for the sake of others,which is considered an act of piety.This paper will study employer-employee relationships in the light of thethree institutions mentioned above. A framework for conducting employer-employeerelationships is formulated and is then used to determine, from theIslamic point of view, the proper wages. The findings of this paper show thatan economically efficient and equitable wage structure can evolve within thisframework and that such a wage structure would promote the parties’ mutualrelationships which, in turn, would lead to industrial peace.The body of the paper is organized as follows: a review of the existingliterature on the subject, the development of an Islamic framework for employer-employeerelationships, a discussion of the Islamic approach to wagecompensation, and some concluding remarks ...


2015 ◽  
Vol 5 (2) ◽  
pp. 148-171
Author(s):  
Denisa Gunišová ◽  
Jana Duchovičová

Authors in this contribution focus on issue of subject matter structure creation by the teacher as an important psycho-didactic domain of education process and how does a student perceive this structure. The aim of the teacher is not only to impart the knowledge to students but also to show them and teach them possible ways of how to understand the subject matter better and how to get to the fundamentals of it. Based on the structure of subject matter created by the teacher a student creates cognitive frames which become basis for his further learning. We pay attention to definition of epistemology of subject matter structure, questions of psycho-didactic approach to teaching, creating structure of subject matter and how does the teacher work with the text. Empirical part of the contribution investigates teachers' preferences of subject matter structure and statistically describes subjective perception of level of understanding of the subject matter by a student influenced by the particular subject matter structure realized by the teacher.


The theory of the vibrations of the pianoforte string put forward by Kaufmann in a well-known paper has figured prominently in recent discussions on the acoustics of this instrument. It proceeds on lines radically different from those adopted by Helmholtz in his classical treatment of the subject. While recognising that the elasticity of the pianoforte hammer is not a negligible factor, Kaufmann set out to simplify the mathematical analysis by ignoring its effect altogether, and treating the hammer as a particle possessing only inertia without spring. The motion of the string following the impact of the hammer is found from the initial conditions and from the functional solutions of the equation of wave-propagation on the string. On this basis he gave a rigorous treatment of two cases: (1) a particle impinging on a stretched string of infinite length, and (2) a particle impinging on the centre of a finite string, neither of which cases is of much interest from an acoustical point of view. The case of practical importance treated by him is that in which a particle impinges on the string near one end. For this case, he gave only an approximate theory from which the duration of contact, the motion of the point struck, and the form of the vibration-curves for various points of the string could be found. There can be no doubt of the importance of Kaufmann’s work, and it naturally becomes necessary to extend and revise his theory in various directions. In several respects, the theory awaits fuller development, especially as regards the harmonic analysis of the modes of vibration set up by impact, and the detailed discussion of the influence of the elasticity of the hammer and of varying velocities of impact. Apart from these points, the question arises whether the approximate method used by Kaufmann is sufficiently accurate for practical purposes, and whether it may be regarded as applicable when, as in the pianoforte, the point struck is distant one-eighth or one-ninth of the length of the string from one end. Kaufmann’s treatment is practically based on the assumption that the part of the string between the end and the point struck remains straight as long as the hammer and string remain in contact. Primâ facie , it is clear that this assumption would introduce error when the part of the string under reference is an appreciable fraction of the whole. For the effect of the impact would obviously be to excite the vibrations of this portion of the string, which continue so long as the hammer is in contact, and would also influence the mode of vibration of the string as a whole when the hammer loses contact. A mathematical theory which is not subject to this error, and which is applicable for any position of the striking point, thus seems called for.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1050
Author(s):  
Federico Zanelli ◽  
Francesco Castelli-Dezza ◽  
Davide Tarsitano ◽  
Marco Mauri ◽  
Maria Laura Bacci ◽  
...  

Smart monitoring systems are currently gaining more attention and are being employed in several technological areas. These devices are particularly appreciated in the structural field, where the collected data are used with purposes of real time alarm generation and remaining fatigue life estimation. Furthermore, monitoring systems allow one to take advantage of predictive maintenance logics that are nowadays essential tools for mechanical and civil structures. In this context, a smart wireless node has been designed and developed. The sensor node main tasks are to carry out accelerometric measurements, to process data on-board, and to send wirelessly synthetic information. A deep analysis of the design stage is carried out, both in terms of hardware and software development. A key role is played by energy harvesting integrated in the device, which represents a peculiar feature and it is thanks to this solution and to the adoption of low power components that the node is essentially autonomous from an energy point of view. Some prototypes have been assembled and tested in a laboratory in order to check the design features. Finally, a field test on a real structure under extreme weather conditions has been performed in order to assess the accuracy and reliability of the sensors.


Sign in / Sign up

Export Citation Format

Share Document