scholarly journals Processing of signals at the multiradar system on the basis of surveillance two coordinate radars

2020 ◽  
Vol 69 (4) ◽  
Author(s):  
H. V. Khudov ◽  
◽  
V. M. Lishchenko ◽  
V. V. Hnyrya
Keyword(s):  
Signal To Noise Ratio ◽  
Radar System ◽  
Coherent Signals ◽  
Signal To Noise ◽  
Degree Of Coherence ◽  
Objects Detection ◽  
Radar Information ◽  
Processing Point ◽  
Expected Signal

The subject of research in this work is the problem of developing methods for signal processing in a multi-radar system based on two-coordinate surveillance radar stations with mechanical azimuth rotation. The aim of the article is to improve the quality of airborne objects detection by combining the same type of two coordinate radars in a multi-radar system. It is proposed to combine the existing surveillance radar stations into a spatially separated coherent multi-radar system. The processing of radar information from individual positions of such spatially separated systems is carried out in the central information processing point, which can be combined with one of the positions or located separately. At such a point, it is advisable to carry out joint processing of radar information, the efficiency of which depends on the degree of coherence that is provided in the system. The synthesis of optimal detectors of coherent and incoherent signals is carried out in the work. The characteristics of air object detection in a multi-radar system with compatible signal reception are evaluated. The results obtained: increasing the number of radar stations in the system, regardless of the degree of signal coherence, showed the greatest efficiency in terms of increasing the signal-to-noise ratio when moving from a stand-alone radar station to a two element system, the rational number of radar stations in a multi-radar system should not exceed four. The expected signal-to-noise gain in a system of four radars can be up to eighteen decibels for a system with coherent signals and up to eleven decibels for a system with incoherent signals. The using of more than four radars is impractical.

scholarly journals Methods of signal processing in a multiradar system of the same type of two-coordinated surveillance radars

2020 ◽  
pp. 65-72
Author(s):  
Г.В. Худов ◽  
Сальман Рашід Оваід ◽  
В.М. Ліщенко ◽  
В.О. Тютюнник
Keyword(s):  
Signal Processing ◽  
Optimal Number ◽  
Radar System ◽  
Coherent Signals ◽  
Signal Noise ◽  
Noise Threshold ◽  
The Subject ◽  
Mechanical Rotation ◽  
Expected Signal

The subject of research in the paper is the problem of developing methods of signal processing in a multiradar system of the same type of two-coordinate surveillance radars with mechanical rotation. The aim of the paper is to improve the quality of detection of air objects by combining the same type of two-coordinate radars in a multi-radar system. It is proposed to combine the existing surveillance radar stations into a spatially spaced coherent multi-radar system. The synthesis of optimal detectors of coherent and incoherent signals is carried out. The characteristics of detection of air objects in a multi-radar system with compatible signal receiving have been evaluated. The obtained results: the addition of the second radar, regardless of the degree of signal coherence, showed the greatest efficiency in the gain in terms of signal / noise, the optimal number of radars in the multi-radar system is not more than four. The expected signal / noise threshold gain in a system of four radars can be up to eighteen decibels for a system with coherent signals and up to eleven decibels for a system with incoherent signals. The using of more than four radars is impractical.

Image Quality Enhancing by Efficient Histogram Equalization

2014 ◽  
Vol 2 (2) ◽  
pp. 47-58
Author(s):  
Ismail Sh. Baqer
Keyword(s):  
Image Quality ◽  
Contrast Enhancement ◽  
Mean Squared Error ◽  
Signal To Noise Ratio ◽  
Histogram Equalization ◽  
Gray Level ◽  
Signal To Noise ◽  
Squared Error ◽  
Noise Ratio

A two Level Image Quality enhancement is proposed in this paper. In the first level, Dualistic Sub-Image Histogram Equalization DSIHE method decomposes the original image into two sub-images based on median of original images. The second level deals with spikes shaped noise that may appear in the image after processing. We presents three methods of image enhancement GHE, LHE and proposed DSIHE that improve the visual quality of images. A comparative calculations is being carried out on above mentioned techniques to examine objective and subjective image quality parameters e.g. Peak Signal-to-Noise Ratio PSNR values, entropy H and mean squared error MSE to measure the quality of gray scale enhanced images. For handling gray-level images, convenient Histogram Equalization methods e.g. GHE and LHE tend to change the mean brightness of an image to middle level of the gray-level range limiting their appropriateness for contrast enhancement in consumer electronics such as TV monitors. The DSIHE methods seem to overcome this disadvantage as they tend to preserve both, the brightness and contrast enhancement. Experimental results show that the proposed technique gives better results in terms of Discrete Entropy, Signal to Noise ratio and Mean Squared Error values than the Global and Local histogram-based equalization methods

Singular Values Decomposition and Lifting Wavelet Transform for Speech Signal Embedding into Digital Image

2019 ◽  
Vol 12 (2) ◽  
pp. 138-151
Author(s):  
Mourad Talbi ◽  
Med Salim Bouhlel
Keyword(s):  
Wavelet Transform ◽  
Speech Signal ◽  
Signal To Noise Ratio ◽  
Perceptual Quality ◽  
Lifting Wavelet Transform ◽  
Signal To Noise ◽  
Perceptual Evaluation ◽  
Lifting Wavelet ◽  
Noise Ratio

Background: In this paper, we propose a secure image watermarking technique which is applied to grayscale and color images. It consists in applying the SVD (Singular Value Decomposition) in the Lifting Wavelet Transform domain for embedding a speech image (the watermark) into the host image. Methods: It also uses signature in the embedding and extraction steps. Its performance is justified by the computation of PSNR (Pick Signal to Noise Ratio), SSIM (Structural Similarity), SNR (Signal to Noise Ratio), SegSNR (Segmental SNR) and PESQ (Perceptual Evaluation Speech Quality). Results: The PSNR and SSIM are used for evaluating the perceptual quality of the watermarked image compared to the original image. The SNR, SegSNR and PESQ are used for evaluating the perceptual quality of the reconstructed or extracted speech signal compared to the original speech signal. Conclusion: The Results obtained from computation of PSNR, SSIM, SNR, SegSNR and PESQ show the performance of the proposed technique.

Multilag Correlation Estimators for Polarimetric Radar Measurements in the Presence of Noise

2012 ◽  
Vol 29 (6) ◽  
pp. 772-795 ◽  
Author(s):  
Lei Lei ◽  
Guifu Zhang ◽  
Richard J. Doviak ◽  
Robert Palmer ◽  
Boon Leng Cheong ◽  
...  
Keyword(s):  
Theoretical Analysis ◽  
Data Quality ◽  
Signal To Noise Ratio ◽  
Simulated Data ◽  
Radar Data ◽  
Polarimetric Radar ◽  
Signal To Noise ◽  
Spectral Moments ◽  
Radar Measurements

Abstract The quality of polarimetric radar data degrades as the signal-to-noise ratio (SNR) decreases. This substantially limits the usage of collected polarimetric radar data to high SNR regions. To improve data quality at low SNRs, multilag correlation estimators are introduced. The performance of the multilag estimators for spectral moments and polarimetric parameters is examined through a theoretical analysis and by the use of simulated data. The biases and standard deviations of the estimates are calculated and compared with those estimates obtained using the conventional method.

scholarly journals Encryption Based Image Watermarking Algorithm in 2DWT-DCT Domains

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5540
Author(s):  
Nayeem Hasan ◽  
Md Saiful Islam ◽  
Wenyu Chen ◽  
Muhammad Ashad Kabir ◽  
Saad Al-Ahmadi
Keyword(s):  
Signal To Noise Ratio ◽  
Image Watermarking ◽  
Similarity Index ◽  
Structural Similarity ◽  
Reconstructed Image ◽  
Discrete Wavelet ◽  
Signal To Noise ◽  
Noise Ratio ◽  
Watermarking Scheme

This paper proposes an encryption-based image watermarking scheme using a combination of second-level discrete wavelet transform (2DWT) and discrete cosine transform (DCT) with an auto extraction feature. The 2DWT has been selected based on the analysis of the trade-off between imperceptibility of the watermark and embedding capacity at various levels of decomposition. DCT operation is applied to the selected area to gather the image coefficients into a single vector using a zig-zig operation. We have utilized the same random bit sequence as the watermark and seed for the embedding zone coefficient. The quality of the reconstructed image was measured according to bit correction rate, peak signal-to-noise ratio (PSNR), and similarity index. Experimental results demonstrated that the proposed scheme is highly robust under different types of image-processing attacks. Several image attacks, e.g., JPEG compression, filtering, noise addition, cropping, sharpening, and bit-plane removal, were examined on watermarked images, and the results of our proposed method outstripped existing methods, especially in terms of the bit correction ratio (100%), which is a measure of bit restoration. The results were also highly satisfactory in terms of the quality of the reconstructed image, which demonstrated high imperceptibility in terms of peak signal-to-noise ratio (PSNR ≥ 40 dB) and structural similarity (SSIM ≥ 0.9) under different image attacks.

The Influence of Alteration of kVp and mAs towards the Image Quality of Acrylic Using CBCT

2019 ◽  
Vol 829 ◽  
pp. 252-257
Author(s):  
Azhari ◽  
Yohanes Hutasoit ◽  
Freddy Haryanto
Keyword(s):  
Image Quality ◽  
Signal To Noise Ratio ◽  
Region Of Interest ◽  
Signal To Noise ◽  
Bite Block ◽  
Significant Difference ◽  
Noise Ratio ◽  
Post Hoc ◽  
Radiograph Image

CBCT is a modernized technology in producing radiograph image on dentistry. The image quality excellence is very important for clinicians to interpret the image, so the result of diagnosis produced becoming more accurate, appropriate, thus minimizing the working time. This research was aimed to assess the image quality using the blank acrylic phantom polymethylmethacrylate (PMMA) (C­5H8O2)n in the density of 1.185 g/cm3 for evaluating the homogeneity and uniformity of the image produced. Acrylic phantom was supported with a tripod and laid down on the chin rest of the CBCT device, then the phantom was fixed, and the edge of the phantom was touched by the bite block. Furthermore, the exposure of the X-ray was executed toward the acrylic phantom with various kVp and mAs, from 80 until 90, with the range of 5 kV and the variation of mA was 3, 5, and 7 mA respectively. The time exposure was kept constant for 25 seconds. The samples were taken from CBCT acrylic images, then as much as 5 ROIs (Region of Interest) was chosen to be analyzed. The ROIs determination was analyzed by using the ImageJ® software for recognizing the influence of kVp and mAs towards the image uniformity, noise and SNR. The lowest kVp and mAs had the result of uniformity value, homogeneity and signal to noise ratio of 11.22; 40.35; and 5.96 respectively. Meanwhile, the highest kVp and mAs had uniformity value, homogeneity and signal to noise ratio of 16.96; 26.20; and 5.95 respectively. There were significant differences between the image uniformity and homogeneity on the lowest kVp and mAs compared to the highest kVp and mAs, as analyzed with the ANOVA statistics analysis continued with the t-student post-hoc test with α = 0.05. However, there was no significant difference in SNR as analyzed with the ANOVA statistic analysis. The usage of the higher kVp and mAs caused the improvement of the image homogeneity and uniformity compared to the lower kVp and mAs.

Registration of the rotation axis in X-ray tomography

2015 ◽  
Vol 22 (2) ◽  
pp. 452-457 ◽  
Author(s):  
Yimeng Yang ◽  
Feifei Yang ◽  
Ferdinand F. Hingerl ◽  
Xianghui Xiao ◽  
Yijin Liu ◽  
...  
Keyword(s):  
Rotation Axis ◽  
Signal To Noise Ratio ◽  
Geological Samples ◽  
Signal To Noise ◽  
High Demand ◽  
X Ray ◽  
Data Registration ◽  
Reconstruction Quality ◽  
Tomographic Data

There is high demand for efficient, robust and automated routines for tomographic data reduction, particularly for synchrotron data. Registration of the rotation axis in data processing is a critical step affecting the quality of the reconstruction and is not easily implemented with automation. Existing methods for calculating the center of rotation have been reviewed and an improved algorithm to register the rotation axis in tomographic data is presented. The performance of the proposed method is evaluated using synchrotron-based microtomography data on geological samples with and without artificial reduction of the signal-to-noise ratio. The proposed method improves the reconstruction quality by correcting both the tilting error and the translational offset of the rotation axis. The limitation of this promising method is also discussed.

scholarly journals Photometric Characteristics of Data from the Hubble Space Telescope Goddard-High Resolution Spectrograph

1988 ◽  
Vol 132 ◽  
pp. 35-38
Author(s):  
Dennis C. Ebbets ◽  
Sara R. Heap ◽  
Don J. Lindler
Keyword(s):  
Exposure Time ◽  
Hubble Space Telescope ◽  
Signal To Noise Ratio ◽  
Scattered Light ◽  
Signal To Noise ◽  
Space Telescope ◽  
Additional Noise ◽  
Reduction Strategies ◽  
Noise Ratio

The G-HRS is one of four axial scientific instruments which will fly aboard the Hubble Space Telescope (ref 1,2). It will produce spectroscopic observations in the 1050 A ≤ λ ≤ 3300 A region with greater spectral, spatial and temporal resolution than has been possible with previous space-based instruments. Five first order diffraction gratings and one Echelle provide three modes of spectroscopic operation with resolving powers of R = λ/ΔΔ = 2000, 20000 and 90000. Two magnetically focused, pulse-counting digicon detectors, which differ only in the nature of their photocathodes, produce data whose photometric quality is usually determined by statistical noise in the signal (ref 3). Under ideal circumstances the signal to noise ratio increases as the square root of the exposure time. For some observations detector dark count, instrumental scattered light or granularity in the pixel to pixel sensitivity will cause additional noise. The signal to noise ratio of the net spectrum will then depend on several parameters, and will increase more slowly with exposure time. We have analyzed data from the ground based calibration programs, and have developed a theoretical model of the HRS performance (ref 4). Our results allow observing and data reduction strategies to be optimized when factors other than photon statistics influence the photometric quality of the data.

Quality of Computed Tomography Pulmonary Embolism and Aortic Phase Images Acquired with Power Injection via an Arm Port

2017 ◽  
Vol 22 (2) ◽  
pp. 88-92
Author(s):  
Ryan Verity ◽  
David Leswick ◽  
Brent Burbridge ◽  
Rhonda Bryce ◽  
Hyun Lim
Keyword(s):  
Computed Tomography ◽  
Pulmonary Embolism ◽  
Image Quality ◽  
Thin Section ◽  
Signal To Noise Ratio ◽  
Contrast Injection ◽  
Signal To Noise ◽  
Streak Artifact ◽  
Noise Ratio

Abstract Background: The safety of power-injectable implanted arm ports is well established, but there is insufficient data to conclude that image quality of computed tomography resulting from contrast introduced via the port is of equal quality to images derived from contrast introduced via traditional peripheral access. The objective of this study was to determine whether the image quality of computed tomography pulmonary embolism and computed tomography aorta studies would differ when injecting contrast via an implanted arm port vs a peripheral intravenous site. We hypothesized that injecting via an implanted arm port would produce better-quality images, the result of more appropriate timing and less streak artifact. Methods: Scans from a provincial database search for patients who underwent a computed tomography pulmonary embolism or aorta study with contrast injection via the implanted arm port and thin section images available, were reviewed (pulmonary embolism studies n = 3, aorta studies n = 3). Only a limited number of patients were available for review because there are currently few patients with these ports in place and we limited evaluation to thin section images. Comparison was made with 6 control patients who did not have a port and had received a peripheral arm intravenous contrast injection for these study types. Objective measurements included signal-to-noise ratio and contrast-to-noise ratio of the pulmonary arteries (4 sites) and aorta (2 sites) as appropriate for scan type. Subjective analysis of image quality was performed by 2 radiologists. Results: Although sample size was limited, the implanted arm port group had similar or higher mean signal-to-noise ratio and contrast-to-noise ratio values at all sites. Subjective assessments showed the implanted arm port group to have similar or better opacification and diagnostic confidence; similar or less streak artifact was also observed at each of the sites. Conclusions: These exploratory results suggest that studies with implanted arm port injection can generate high-quality images on both objective and subjective assessment, similar to, or possibly better than, images generated from usual peripheral intravenous access for contrast injection.

Sign in / Sign up

Export Citation Format

Share Document