scholarly journals Usage of Arduino-based Datalogger for thermal comfort variables monitoring

Author(s):  
William de Brito Pantoja ◽  
Caio Castro Rodrigues ◽  
Otavio Andre Chase ◽  
Felipe Souza de Almeida ◽  
Antonio Thiago Madeira Beirão ◽  
...  

Environmental monitoring is an effective tool to identify problems in anthropic areas, and the emergence of cyber-physical sensors contributes to technological advances in the area. This paper introduces a device based on the Arduino cyber-physical platform to monitor air temperature and relative humidity in real-time with high efficiency. With the relationship between these two environmental variables, it will be possible to calculate the Heat Index (CI), the Temperature and Humidity Index (ITU), the Effective Temperature Index (ET), and the Thermal Discomfort Index (IDT). The Datalogger developed is easily programmable and easy to assemble and presented stable operation and proper functioning.

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1200
Author(s):  
Yong-Joon Jun ◽  
Seung-ho Ahn ◽  
Kyung-Soon Park

The Green Remodeling Project under South Korea’s Green New Deal policy is a government-led project intended to strengthen the performance sector directly correlated with energy performance among various elements of improvement applicable to building remodeling by replacing insulation materials, introducing new and renewable energy, introducing high-efficiency equipment, etc., with public buildings taking the lead in green remodeling in order to induce energy efficiency enhancement in private buildings. However, there is an ongoing policy that involves the application of a fragmentary value judgment criterion, i.e., whether to apply technical elements confined to the enhancement of the energy performance of target buildings and the prediction of improvement effects according thereto, thus resulting in the phenomenon of another important value criterion for green remodeling, i.e., the enhancement of the occupant (user) comfort performance of target buildings as one of its purposes, being neglected instead. In order to accurately grasp the current status of these problems and to promote ‘expansion of the value judgment criteria for green remodeling’ as an alternative, this study collected energy usage data of buildings actually used by public institutions and then conducted a total analysis. After that, the characteristics of energy usage were analyzed for each of the groups of buildings classified by year of completion, thereby carrying out an analysis of the correlation between the non-architectural elements affecting the actual energy usage and the actual energy usage data. The correlation between the improvement performance of each technical element and the actual improvement effect was also analyzed, thereby ascertaining the relationship between the direction of major policy strategies and the actual energy usage. As a result of the relationship analysis, it was confirmed that the actual energy usage is more affected by the operating conditions of the relevant building than the application of individual strategic elements such as the performance of the envelope insulation and the performance of the high-efficiency system. In addition, it was also confirmed that the usage of public buildings does not increase in proportion to their aging. The primary goal of reducing energy usage in target buildings can be achieved if public sector (government)-led green remodeling is pushed ahead with in accordance with biased value judgment criteria, just as in the case of a campaign to refrain from operating cooling facilities in aging public buildings. However, it was possible to grasp through the progress of this study that the remodeling may also result in the deterioration of environmental comfort and stability, such as the numerical value of the indoor thermal environment. The results of this study have the significance of providing basic data for pushing ahead with a green remodeling policy in which the value judgment criteria for aging existing public buildings are more expanded, and it is necessary to continue research in such a direction that the quantitative purpose of green remodeling, which is to reduce energy usage in aging public buildings, and its qualitative purpose, which is to enhance their environmental performance for occupants’ comfort, can be mutually balanced and secured at the same time.


Author(s):  
Anatoli A. Borissov ◽  
Alexander A. Borissov ◽  
Kenneth K. Kramer

Each year, the users in the U.S. alone spend over $100 billion on various type of engines to produce power — electrical, mechanical, and thermal. Despite technological advances, most all of these power generation systems have only been fine tuned: the engine efficiencies may have been improved slightly, but the underlying thermodynamic principles have not been modified to effect a drastic improvement. The result is that most engines in service today suffer from two major problems: low fuel efficiency and emission of high levels of polluting gases in the exhaust gases. The current state of propulsion engines or distributed generation technologies using heat engines shows an average efficiency of between 20% and 40%. These low efficiencies in a high–cost energy market indicate a great need for more efficient technologies. This paper describes a new method of achieving a very high efficiency, namely optimizing every stage of the thermodynamic process-Brayton cycle. Two modified processes, such as isothermal compression and recuperation, add about 35% efficiency to the conventional Brayton cycle, making 60% efficiency for modified Brayton cycle. By utilizing a positive displacement compressor and expander with a novel vortex combustion chamber and a vortex recuperator, high levels of efficiency with low emissions and noise are possible. The prototype engine with low RPM and high torque has been built which use continuous combustion of different fuels under a constant pressure. First results of the engine’s components testing are presented.


2011 ◽  
Vol 68 (3) ◽  
pp. 528-536 ◽  
Author(s):  
Miguel Bernal ◽  
Yorgos Stratoudakis ◽  
Simon Wood ◽  
Leire Ibaibarriaga ◽  
Luis Valdés ◽  
...  

Abstract Bernal, M., Stratoudakis, Y., Wood, S., Ibaibarriaga, L., Uriarte, A., Valdés, L., and Borchers, D. 2011. A revision of daily egg production estimation methods, with application to Atlanto-Iberian sardine. 2. Spatially and environmentally explicit estimates of egg production. – ICES Journal of Marine Science, 68: . A spatially and environmentally explicit egg production model is developed to accommodate a number of assumptions about the relationship between egg production and mortality and associated environmental variables. The general model was tested under different assumptions for Atlanto-Iberian sardine. It provides a flexible estimator of egg production, in which a range of assumptions and hypotheses can be tested in a structured manner within a well-defined statistical framework. Application of the model to Atlanto-Iberian sardine increased the precision of the egg production time-series, and allowed improvements to be made in understanding the spatio-temporal variability in egg production, as well as implications for ecology and stock assessment.


2005 ◽  
Vol 56 (5) ◽  
pp. 609 ◽  
Author(s):  
T. S. Elsdon ◽  
B. M. Gillanders

Elemental concentrations within fish otoliths can track movements and migrations of fish through gradients of environmental variables. Tracking the movements of fish relies on establishing links between environmental variables and otolith chemistry, with links commonly made using laboratory experiments that rear juvenile fish. However, laboratory experiments done on juvenile fish may not accurately reflect changes in wild fish, particularly adults. We tested the hypotheses that: (1) the relationship between ambient (water) and otolith chemistry is similar between laboratory-reared black bream (Acanthopagrus butcheri) and wild black bream; and (2) ontogeny does not influence otolith chemistry. Field-collected and laboratory-reared fish showed similar effects of ambient strontium : calcium (Sr : Ca) on otolith Sr : Ca concentrations. However, ambient and otolith barium : calcium concentrations (Ba : Ca) differed slightly between laboratory-reared and field-collected fish. Importantly, fish reared in stable environmental variables showed no influence of ontogeny on Sr : Ca or Ba : Ca concentrations. Natural distributions of ambient Sr : Ca showed no clear relationship to salinity, yet, ambient Ba : Ca was inversely related to salinity. The distribution of ambient Sr : Ca and Ba : Ca in estuaries inhabited by black bream, suggest that these elements can answer different questions regarding environmental histories of fish. Reconstructing salinity histories of black bream using otolith Ba : Ca concentrations seems plausible, if adequate knowledge of Ba : Ca gradients within estuaries is obtained.


2015 ◽  
Vol 87 (3) ◽  
pp. 1717-1726 ◽  
Author(s):  
JULIANA WOJCIECHOWSKI ◽  
ANDRÉ A. PADIAL

One of the main goals of monitoring cyanobacteria blooms in aquatic environments is to reveal the relationship between cyanobacterial abundance and environmental variables. Studies typically correlate data that were simultaneously sampled. However, samplings occur sparsely over time and may not reveal the short-term responses of cyanobacterial abundance to environmental changes. In this study, we tested the hypothesis that stronger cyanobacteria x environment relationships in monitoring are found when the temporal variability of sampling points is incorporated in the statistical analyses. To this end, we investigated relationships between cyanobacteria and seven environmental variables that were sampled twice yearly for three years across 11 reservoirs, and data from an intensive monitoring in one of these reservoirs. Poor correlations were obtained when correlating data simultaneously sampled. In fact, the 'highly recurrent' role of phosphorus in cyanobacteria blooms is not properly observed in all sampling periods. On the other hand, the strongest correlation values for the total phosphorus x cyanobacteria relationship were observed when we used the variation of sampling points. We have also shown that environment variables better explain cyanobacteria when a time lag is considered. We conclude that, in cyanobacteria monitoring, the best approach to reveal determinants of cyanobacteria blooms is to consider environmental variability.


Author(s):  
Feilong Liu ◽  
Junhao Feng ◽  
Jia Xie ◽  
Quanke Feng ◽  
Martijn Van Den Broek ◽  
...  

Multi-column envelope engaging couples have been proposed for single screw compressors to reduce the friction and prolong the operational life. However, little is mentioned about the relationship between columns at opposite sides of the star-wheel teeth. An imbalance in the lubricant film forces would appear and influence the lubrication between the tooth and the groove. During a real design process, it is necessary to try several times for each different type of compressor to find the optimal combination of columns. In part, due to the large number of columns, it also makes both manufacturing processing and product testing difficult. In this paper, a synergy-column design method and its related manufacturing methods are presented. The locations and relationships of the designed columns can be prescribed by given the tooth width. Manufacturing of the rotor and star-wheel shows the new design method can be more efficient through processing. The stable operation results prove that the synergy-column envelope meshing pair can solve the star-wheel’s wear-out problem.


2021 ◽  
Author(s):  
◽  
Monica Nicole Micek

<p>Internal Marketing, a long-debated concept amongst academics and practitioners, is suggested to be a competitive advantage to organisations that utilise its practices. Often dismissed as merely selling the marketing of a product or service to employees within an organisation, Internal Marketing encompasses a combination of the key elements of communication, training, and feedback in order to create motivated, customer-orientated employees. Through employees and managers working together towards a well communicated organisational cause of Internal Marketing, internal procedures can evolve to better service and satisfy customers.  Organisational restructures are an ongoing concern as technological advances, value-adding business process, and globalisation change the way that businesses run and operate. In order to save on costs of operations, employment, and office rental space, downsizing an organisation may initially present itself as a cost-saving practice. Often unconsidered are the front-line customer-facing employees and customers of an organisation. Employees may feel distraught and concerned about losing their job, or having to find a new job, which may affect customer service, and subsequently customers may face the brunt of the domino effect, either intentionally or unintentionally, due to employees’ emotional disconnection from the organisation.  This research is an exploratory study into Internal Marketing, specifically around an organisational restructure, to better understand its impact on employees and customers through different stages of a restructure. Through the use of online surveys, participants were asked to recall an organisational restructure they were involved in within the last five years. They were asked to report their perceptions of Internal Marketing, their own satisfaction with their job at the time, and their perceptions of Customer Satisfaction throughout different stages of the organisational restructure.  The analysis found that Internal Marketing does have a significant positive relationship with Employee Satisfaction both during and after an organisational restructure. Although no significant relationship was found between Employee Satisfaction and Customer Satisfaction at any stage of the restructure, there is a trend within the data suggesting that the relationship may be stronger before and after an organisational restructure.  Benefits and contribution of this research for academics include development of a conceptual model, as well as the benefits and effects of Internal Marketing, and extending the existing literature. For practitioners, benefits include insights into better understanding of the role of Internal Marketing. Specifically, the differences in perception of the practice between employees and managers, and why it is important to understand and address Employee Satisfaction and Customer Satisfaction during an organisational restructure.</p>


2019 ◽  
Vol 3 (122) ◽  
pp. 59-71
Author(s):  
Volodymyr Serhiiovych Hryshyn ◽  
Serhii Oleksiiovych Abramov

Technological possibilities of jet processing cause increased attention to the study of the regularities of the process. The main interest for practice is the establishment of the kind of dependencies between technological parameters (abrasive particles size, particle speed, concentration, compressed air pressure, attack angle, physical and mechanical properties of particles and surface to be treated) and initial process parameters (roughness of the treated surface, removal rates of the metal and libel). That, in turn, determines the necessity of optimal choice of the values of technological parameters in the conditions of a concrete production situation. The basic regularities can be established as a result of regression analysis of experimental data. However, the use of the resulting laws is limited to the complexity of the process and relatively narrow areas of changing the parameters of the experiment.The purpose of the work is to determine the factors that determine the formation of a microrelief in the area of the abrasive air jet, the relationship between them and the degree of their effect on the intensity of the formation of a microrelief; formation of a model of finishing treatment of collector plates, creation of theoretical bases and methodology of designing high-efficient resource-saving technological processes of production of motor collectors of electric machines.Analysis of recent research and publications. The following contributions were made to the development of the theory of modeling of the inkjet-abrasive surface treatment: Volovetsky O.E., Denysyuk V.Yu., Kharchik M.M., Buts BP, Andilahi A.A., Novikov FV, Gordeyev AI, Urbanyuk Ye.A., Silin R.S. and other.The most universal approach based on determining the search dependencies and solving the problem of optimizing the technological parameters of the processing process as a result of statistical simulation, namely the ability to control the input parameters before the start of the model or in the process of work - one of the key benefits of using simulation modeling for the analysis of systems and processes. This allows you to determine the optimal parameters, which maximize the efficiency of the processes, determine the relationship between the input and output parameters.The paper considers: creation of theoretical bases and methodology of designing high-efficiency resource-saving technological processes of production of motor collectors of electric machines; the process of formation of microrelief of collector plates in the area of the abrasive air jet, the relationship between the factors and the degree of their influence on the intensity of formation. The formation of a model of finishing treatment of collector plates treated with silicon carbide (black) was determined.Prospects for further research are the improvement of the technological process of obtaining collector nodes on the possibilities of implementation.


The paper investigates the feasibility of adding a liquid heater to an oil-immersed transformer. It proves that design the high efficiency of power transformers, losses due to idling and short circuits are substantial and are scattered in the environment as heat. The paper proposes a novel design that implements a liquid (coolant) heater to enable the unit not only to convert electricity, but also to generate heat. In order to analyze the feasibility of such heat recycling, the authors have developed an equivalent thermal circuit and a mathematical model thereof. Said heater can operate in two modes. In the passive mode, the coolant it contains only absorbs the heat emitted (lost) by the power transformer. In the active mode, it also receives the heat emitted due to the passage of electric current through the pipes of the heater. The paper further introduces the definition of heater efficiency. Studies have shown that up to 50 % of transformer heat losses can be recycled by heating the coolant in the heater. The paper presents the relationship between utilized heat and transformer losses, as well as heater efficiency as a function of coolant flow rate. The heater efficiency exceeds 90 % in the active mode.


Author(s):  
Warly Neves de Araujo ◽  
Randra Karoline Rodrigues Inacio ◽  
Amanda Aguiar Barros ◽  
Daniela Santos do Nascimento ◽  
Eva Coelho da Silva ◽  
...  

Childhood obesity has grown worryingly on a global scale one of the biggest influencers are technological advances exposed early to children. Therefore, this study aimed to seek in the literature the relationship between modernity and the high incidence of children above their ideal weight. The research is a systematic literature review on the factors that are linked to the high prevalence of children above their ideal weight today. After the analysis of the studies, it is notorious the impact generated by technology on the health and development of children when they are used early. Concluding the present study that the negative factors that have been contributing to the triggering of childhood obesity are: passive habits, that is, little physical activity, the large number of hours spent in front of TV, video game, DVD between Other electronic devices this combined with poor consumption feeding of high fat and sugar products and lack of physical exercise are factors that reflect a negative response in children’s lives favoring body fat accumulation.


Sign in / Sign up

Export Citation Format

Share Document