scholarly journals Rainfall-runoff Processes in Moso-bamboo (Phyllostachys pubescens) Forests : an Observation Result of Overland-flow and Biomat-flow

2011 ◽  
Vol 24 (6) ◽  
pp. 360-368 ◽  
Author(s):  
Kohei KURAMOTO ◽  
Yoshinori SHINOHARA ◽  
Hikaru KOMATSU ◽  
Jun'ichiro IDE ◽  
Kyoichi OTSUKI
Keyword(s):  
Overland Flow ◽  
Moso Bamboo ◽  
Phyllostachys Pubescens ◽  
Rainfall Runoff

scholarly journals Multi-Objective Model-Based Assessment of Green-Grey Infrastructures for Urban Flood Mitigation

Hydrology ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 110
Author(s):  
Carlos Martínez ◽  
Zoran Vojinovic ◽  
Arlex Sanchez
Keyword(s):  
Green Infrastructure ◽  
Overland Flow ◽  
Flood Damage ◽  
Optimal Number ◽  
Rainfall Runoff ◽  
Urban Catchment ◽  
Model Based ◽  
Model Domain ◽  
Infiltration Processes ◽  
2D Model

This paper presents the performance quantification of different green-grey infrastructures, including rainfall-runoff and infiltration processes, on the overland flow and its connection with a sewer system. The present study suggests three main components to form the structure of the proposed model-based assessment. The first two components provide the optimal number of green infrastructure (GI) practices allocated in an urban catchment and optimal grey infrastructures, such as pipe and storage tank sizing. The third component evaluates selected combined green-grey infrastructures based on rainfall-runoff and infiltration computation in a 2D model domain. This framework was applied in an urban catchment in Dhaka City (Bangladesh) where different green-grey infrastructures were evaluated in relation to flood damage and investment costs. These practices implemented separately have an impact on the reduction of damage and investment costs. However, their combination has been shown to be the best action to follow. Finally, it was proved that including rainfall-runoff and infiltration processes, along with the representation of GI within a 2D model domain, enhances the analysis of the optimal combination of infrastructures, which in turn allows the drainage system to be assessed holistically.

scholarly journals Anti-fungal activity of moso bamboo (Phyllostachys pubescens) leaf extract and its development into a botanical fungicide to control pepper phytophthora blight

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Min Liao ◽  
Xuexiang Ren ◽  
Quan Gao ◽  
Niuniu Liu ◽  
Feng Tang ◽  
...  
Keyword(s):  
Leaf Extract ◽  
Active Component ◽  
Synergistic Effects ◽  
Moso Bamboo ◽  
Phyllostachys Pubescens ◽  
Phytophthora Blight ◽  
Edible Plant ◽  
Fungal Activity ◽  
Anti Fungal ◽  
Pepper Phytophthora Blight

AbstractMoso bamboo (Phyllostachys pubescens, Gramineae) is a well-known medicinal and edible plant found in China with various bioactivities, but few systematic studies address the utilization of its anti-fungal activity. The extract of moso bamboo leaf showed good anti-fungal activity to Phytophthora capsici, Fusarium graminearum, Valsa mali Miyabe et Yamada, Botryosphaeria dothidea, Venturia nashicola, and Botrytis cinerea Pers, with inhibitory rate of 100.00%, 75.12%, 60.66%, 57.24%, 44.62%, and 30.16%, respectively. Anti-fungal activity was different by the difference of samples picking time and location. The extract showed good synergistic effects with carbendazim at the ratios of 9:1 and 15:1 (extract : carbendazim), and the co-toxicity coefficients were 124.4 and 139.95. Compound 2 was isolated and identified as the main active component, with the EC50 value of 11.02 mg L−1. Then, the extract was formulated as a 10% emulsion in water, which was stable and had no acute toxic effects. Moreover, a field trial about this formulation was assayed to control pepper phytophthora blight, with the control effect of 85.60%. These data provided a better understanding of the anti-fungal activity and relevant active component of moso bamboo leaf extract. Taken together, our findings illustrated that bamboo leaf extract could be developed and utilized as a botanical fungicide or fungicide adjuvant.

scholarly journals Water Resistance and Creep Behavior of Heat-Treated Moso Bamboo Determined by the Stepped Isostress Method

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1264
Author(s):  
Teng-Chun Yang ◽  
Tung-Lin Wu ◽  
Chin-Hao Yeh
Keyword(s):  
Heat Treatment ◽  
Water Absorption ◽  
Creep Behavior ◽  
Heat Treatment Temperature ◽  
Water Resistance ◽  
Absorption Efficiency ◽  
Treatment Temperature ◽  
Moso Bamboo ◽  
Phyllostachys Pubescens ◽  
Heat Treated

The influence of heat treatment on the physico-mechanical properties, water resistance, and creep behavior of moso bamboo (Phyllostachys pubescens) was determined in this study. The results revealed that the density, moisture content, and flexural properties showed negative relationships with the heat treatment temperature, while an improvement in the dimensional stability (anti-swelling efficiency and anti-water absorption efficiency) of heat-treated samples was observed during water absorption tests. Additionally, the creep master curves of the untreated and heat-treated samples were successfully constructed using the stepped isostress method (SSM) at a series of elevated stresses. Furthermore, the SSM-predicted creep compliance curves fit well with the 90-day full-scale experimental data. When the heat treatment temperature increased to 180 °C, the degradation ratio of the creep resistance (rd) significantly increased over all periods. However, the rd of the tested bamboo decreased as the heat treatment temperature increased up to 220 °C.

MICROSTRUCTURE ANALYSIS OF MOSO BAMBOO (Phyllostachys pubescens MAZEL) SURFACE AFTER UV RADIATION

2019 ◽  
Vol 27 (01) ◽  
pp. 1950090
Author(s):  
HAIXIA YU ◽  
XIN PAN ◽  
WEIMING YANG ◽  
WENFU ZHANG ◽  
XIAOWEI ZHUANG
Keyword(s):  
Uv Radiation ◽  
Cell Walls ◽  
Uv Light ◽  
Parenchyma Cell ◽  
Moso Bamboo ◽  
Thick Wall ◽  
Phyllostachys Pubescens ◽  
Thin Wall ◽  
Intercellular Spaces ◽  
Parenchyma Cell Walls

Bamboo material is widely used in outdoor applications. However, they are easily degraded when exposed to sunlight, their smooth surface will gradually turn to rough, and small cracks will appear and finally develop to large cracks. The paper presents a first-time investigation on the microstructure changes in the tangential section of Moso bamboo (Phyllostachys pubescens Mazel) radiated by artificial UV light. The results showed that the cracks mainly appeared at intercellular spaces of fibers where lignin content was high, the parenchyma cell walls and neighbor pits where the cell wall was very thin and more vulnerable than the other parts. In addition, the part of raised area and pit cavity tended to absorb more UV light radiation and showed more and larger cracks than the otherwhere. Cracks at the intercellular spaces of fibers were larger and bigger than those on the parenchyma cell walls. The cracks on the pits of the parenchyma cell walls normally appeared at one pit and then extended to the several surrounding pits. Bordered pits cavity showed more and larger cracks than the pits on the thin wall cells. The simple pits on the thick wall cells and the fiber cells were unaffected by UV radiation.

Rainfall runoff in soil erosion with simulated rainfall, overland flow and cover

Soil Research ◽  
1983 ◽  
Vol 21 (2) ◽  
pp. 109 ◽  
Author(s):  
MJ Singer ◽  
PH Walker
Keyword(s):  
Soil Erosion ◽  
Soil Loss ◽  
Rainfall Intensity ◽  
Overland Flow ◽  
Podzolic Soil ◽  
Simulated Rainfall ◽  
Rainfall Runoff ◽  
Runoff Water ◽  
Soil Transport ◽  
Raindrop Impact

The 20-100 mm portion of a yellow podzolic soil (Albaqualf) from the Ginninderra Experiment Station (A.C.T.) was used in a rainfall simulator and flume facility to elucidate the interactions between raindrop impact, overland water flow and straw cover as they affect soil erosion. A replicated factorial design compared soil loss in splash and runoff from 50 and 100 mm h-1 rainfall, the equivalent of 100 mm h-1 overland flow, and 50 and 100 mm h-1 rainfall plus the equivalent of 100 mm h-' overland flow, all at 0, 40 and 80% straw cover on a 9% slope. As rainfall intensity increased, soil loss in splash and runoff increased. Within cover levels, the effect of added overland flow was to decrease splash but to increase total soil loss. This is due to an interaction between raindrops and runoff which produces a powerful detaching and transporting mechanism within the flow known as rain-flow transportation. Airsplash is reduced, in part, because of the changes in splash characteristics which accompany changes in depths of runoff water. Rain-flow transportation accounted for at least 64% of soil transport in the experiment and airsplash accounted for no more than 25% of soil transport The effects of rainfall, overland flow and cover treatments, rather than being additive, were found to correlate with a natural log transform of the soil loss data.

scholarly journals Rainfall-runoff modelling in a catchment with a complex groundwater flow system: application of the Representative Elementary Watershed (REW) approach

2005 ◽  
Vol 2 (3) ◽  
pp. 639-690 ◽  
Author(s):  
G. P. Zhang ◽  
H. H. G. Savenije
Keyword(s):  
River Basin ◽  
Overland Flow ◽  
Model Performance ◽  
Source Area ◽  
Subsurface Water ◽  
Watershed Hydrology ◽  
Rainfall Runoff ◽  
Data Set ◽  
Physically Based ◽  
Infiltration Excess

Abstract. Based on the Representative Elementary Watershed (REW) approach, the modelling tool REWASH (Representative Elementary WAterShed Hydrology) has been developed and applied to the Geer river basin. REWASH is deterministic, semi-distributed, physically based and can be directly applied to the watershed scale. In applying REWASH, the river basin is divided into a number of sub-watersheds, so called REWs, according to the Strahler order of the river network. REWASH describes the dominant hydrological processes, i.e. subsurface flow in the unsaturated and saturated domains, and overland flow by the saturation-excess and infiltration-excess mechanisms. Through flux exchanges among the different spatial domains of the REW, surface and subsurface water interactions are fully coupled. REWASH is a parsimonious tool for modelling watershed hydrological response. However, it can be modified to include more components to simulate specific processes when applied to a specific river basin where such processes are observed or considered to be dominant. In this study, we have added a new component to simulate interception using a simple parametric approach. Interception plays an important role in the water balance of a watershed although it is often disregarded. In addition, a refinement for the transpiration in the unsaturated zone has been made. Finally, an improved approach for simulating saturation overland flow by relating the variable source area to both the topography and the groundwater level is presented. The model has been calibrated and verified using a 4-year data set, which has been split into two for calibration and validation. The model performance has been assessed by multi-criteria evaluation. This work is the first full application of the REW approach to watershed rainfall-runoff modelling in a real watershed. The results demonstrate that the REW approach provides an alternative blueprint for physically based hydrological modelling.

Sign in / Sign up

Export Citation Format

Share Document