Study on Treatment of Blood from Abattoir using Microbial Fuel Cell (MFC) Technology with Production of Green Energy

2021 ◽  
Vol 18 (4) ◽  
pp. 135-140
Author(s):  
Sanju Sreedharan
Keyword(s):  
Removal Efficiency ◽  
Microbial Fuel Cells ◽  
Batch Reactor ◽  
Average Energy ◽  
Oxygen Demand ◽  
Green Energy ◽  
Cod Removal ◽  
Energy Output ◽  
Animal Blood ◽  
Cod Removal Efficiency

Zero energy technologies and sustainable energy production are the two major concerns of present day researches. Microbial fuel cells (MFCs) are bioreactors that extract chemical energy stored in organic compounds, into electric potential, through bio-degradation. The core reason for the high strength of effluent generated from slaughterhouses is animal blood. The current study evaluates the potential of MFC technology to reduce the pollution strength of cattle blood in terms of chemical oxygen demand (COD). The current study was piloted in three stages using lab scale two chambered MFC: The first stage was to determine the best oxidising agent as compared to natural aeration from three accessible options, KMnO4, diffused aeration and tape grass aquatic plant. KMnO4 was found to be the superlative with a 30% reduction in COD in 100 hrs batch reactor and a maximum power of 0.97 mW using 125 mL livestock blood. The second stage of the study optimised the concentration of KMnO4. At 500 mg/L KMnO4 concentration, 50% COD removal efficiency was acquired in a batch reactor of 60 hrs with an average energy output of 1.3 mW. In the final stage on the addition of coconut shell activated carbon with an Anolyte at a rate of 40 mL/125 mL of substrate COD removal efficiency increased to 74.9%.

COD removal efficiency and mechanism of HMBR in high volumetric loading for ship domestic sewage treatment

2016 ◽  
Vol 74 (7) ◽  
pp. 1509-1517 ◽  
Author(s):  
Linan Zhu ◽  
Hailing He ◽  
Chunli Wang
Keyword(s):  
Removal Efficiency ◽  
Removal Rate ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Domestic Sewage ◽  
Cod Removal ◽  
Aeration Tank ◽  
Remarkable Effect ◽  
Cod Removal Efficiency ◽  
Volumetric Loading

The hybrid membrane bioreactor (HMBR) has been applied in ship domestic sewage treatment under high volumetric loading for ship space saving. The mechanism and influence factors on the efficiency, including hydraulic retention time (HRT), dissolved oxygen (DO) of chemical oxygen demand (COD) removal were investigated. The HMBR's average COD removal rate was up to 95.13% on volumetric loading of 2.4 kgCOD/(m3•d) and the COD concentration in the effluent was 48.5 mg/L, far below the International Maritime Organization (IMO) discharge standard of 125 mg/L. DO had a more remarkable effect on the COD removal efficiency than HRT. In addition, HMBR revealed an excellent capability of resisting organics loading impact. Within the range of volumetric loading of 0.72 to 4.8 kg COD/(m3•d), the effluent COD concentration satisfied the discharge requirement of IMO. It was found that the organics degradation in the aeration tank followed the first-order reaction, with obtained kinetic parameters of vmax (2.79 d−1) and Ks (395 mg/L). The original finding of this study had shown the effectiveness of HMBR in organic contaminant degradation at high substrate concentration, which can be used as guidance in the full scale of the design, operation and maintenance of ship domestic sewage treatment devices.

Biological wastewater treatment for removal of polymeric resins in UASB reactor: influence of oxygen

2008 ◽  
Vol 57 (7) ◽  
pp. 1047-1052 ◽  
Author(s):  
U. Durán ◽  
O. Monroy ◽  
J. Gómez ◽  
F. Ramírez
Keyword(s):  
Acrylic Acid ◽  
Vinyl Acetate ◽  
Removal Efficiency ◽  
Loading Rate ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Uasb Reactor ◽  
Cod Removal Efficiency ◽  
Consumption Rates ◽  
Polymeric Resins

The biological elimination of polymeric resins compounds (PRC) such as acrylic acid and their esters, vinyl acetate and styrene under methanogenic and oxygen-limited methanogenesis conditions was evaluated. Two UASB reactors (A and B) were used and the removal of the organic matter was studied in four stages. Reactor A was used as methanogenic control during the study. Initially both reactors were operated under methanogenic conditions. From the second stage reactor B was fed with 0.6 and 1 mg/L·d of oxygen (O2). Reactor A had diminution in chemical oxygen demand (COD) removal efficiency from 75±4% to 37±5%, by the increase of PRC loading rate from 750 to 1125 mg COD/L·d. In this reactor there was no styrene elimination. In reactor B the COD removal efficiency was between 73±5% and 80±2%, even with the addition of O2 and increase of the PRC loading rate, owing to oxygen being used in the partial oxidation of these compounds. In this reactor the yields were modified from 0.56 to 0.40 for CH4 and from 0.31 to 0.60 for CO2. The O2 in low concentrations increased 40.7% the consumption rates of acrylic acid, methyl acrylate and vinyl acetate, allowing styrene consumption with a rate of 0.103 g/L·d. Batch cultures demonstrated that under methanogenic and oxygen-limited methanogenesis conditions, the glucose was not used as an electron acceptor in the elimination of PRC.

Performance of horizontal subsurface flow constructed wetland in the removal of tanninsA paper submitted to the Journal of Environmental Engineering and Science.

2010 ◽  
Vol 37 (3) ◽  
pp. 496-501 ◽  
Author(s):  
K.N. Njau ◽  
M. Renalda
Keyword(s):  
Removal Efficiency ◽  
Constructed Wetland ◽  
Control Cell ◽  
Subsurface Flow ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Outlet Concentration ◽  
Cod Removal Efficiency ◽  
Subsurface Flow Constructed Wetland ◽  
Horizontal Subsurface Flow

A horizontal subsurface flow constructed wetland (HSSFCW) was employed to remove tannins from the effluent of a tannins extracting company. Two HSSFCW cells with hydraulic retention time (HRT) of 9 d and packed with limestone were used. One cell without macrophytes was used as a control, while the second cell was planted with Phragmites mauritianus . Results indicated that HSSFCW was capable of treating tannin wastewater that has been seeded with primary facultative pond sludge. Tannins and chemical oxygen demand (COD) removal efficiency of 95.9% and 90.6% with outlet concentration of 27 mg/L and 86 mg/L, respectively, were obtained in the planted cell; while the tannins and COD removal efficiency of 91.1% and 89.5% with outlet concentration of 57 mg/L and 96 mg/L, respectively, were obtained in the control cell.

Effect of continuously dosing Cu(II) on pollutant removal and soluble microbial products in a sequencing batch reactor

2015 ◽  
Vol 72 (9) ◽  
pp. 1653-1661 ◽  
Author(s):  
YangWei Yan ◽  
YuWen Wang ◽  
Yan Liu ◽  
Xiang Liu ◽  
ChenChao Yao ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Extracellular Polymeric Substances ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Pollutant Removal ◽  
Cod Removal ◽  
Synthetic Wastewater ◽  
Soluble Microbial Products ◽  
Cod Removal Efficiency ◽  
Microbial Products

The effects of synthetic wastewater that contained 20 mg/L Cu(II) on the removal of organic pollutants in a sequencing batch reactor were investigated. Results of continuous 20 mg/L Cu(II) exposure for 120 days demonstrated that the chemical oxygen demand (COD) removal efficiency decreased to 42% initially, followed by a subsequent gradual recovery, which peaked at 78% by day 97. Effluent volatile fatty acid (VFA) concentration contributed 67 to 89% of the influent COD in the experimental reactor, which indicated that the degradation of the organic substances ceased at the VFA production step. Meanwhile, the varieties of soluble microbial products (SMP) content and main components (protein, polysaccharide, and DNA) were discussed to reveal the response of activated sludge to the toxicity of 20 mg/L Cu(II). The determination of Cu(II) concentrations in extracellular polymeric substances (EPS) and SMP throughout the experiment indicated an inverse relationship between extracellular Cu(II) concentration and COD removal efficiency.

Phenol degradation in horizontal-flow anaerobic immobilized biomass (HAIB) reactor under mesophilic conditions

2001 ◽  
Vol 44 (4) ◽  
pp. 167-174 ◽  
Author(s):  
R. M.L. Bolaños ◽  
M. B.A. Varesche ◽  
M. Zaiat ◽  
E. Foresti
Keyword(s):  
Removal Efficiency ◽  
Phenol Degradation ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Cod Removal ◽  
Horizontal Flow ◽  
Anaerobic Sludge ◽  
Cod Removal Efficiency ◽  
Immobilized Biomass ◽  
Potential Use

A bench-scale horizontal-flow anaerobic immobilized biomass (HAIB) reactor was assayed aiming to verify its potential use for phenol degradation. The HAIB reactor consisted of a bore-silicate tube (100 cm long; 5.04 cm diameter) filled with polyurethane foam matrices containing immobilized anaerobic sludge. Before being subjected to phenol, the reactor was fed with synthetic substrate at the influent chemical oxygen demand (COD) of 1,028 mg.l−1 achieving 98% of COD removal efficiency. Thereafter, phenol as the sole carbon source was added under step-increasing concentrations from 50 to 1,200 mg.l−1. Phenol degradation was evaluated by gas chromatographic analysis of influent and effluent samples. Process monitoring included determinations of pH, volatile acids, alkalinity and COD. The HAIB reactor was operated at a constant hydraulic detention time (HDT) of 12 hours. After 33 days with 50 mg/l of phenol in the influent, the reactor achieved 98% of COD removal efficiency. Successful phenol degradation (efficiency removal of 99%) occurred for influent concentrations of 100, 300, 600, 900 and 1,200 mg.l−1 after 148, 58, 47, 29 and 7 days, respectively. The predominance of Methanosaeta-like, rods and methanogenic cocci could be observed in all the operating conditions, besides the presence of phenol oxidizing microorganisms as irregular rods. The results indicate that phenol degradation at very high rates can be accomplished in HAIB reactors containing acclimatized biomass.

Anaerobic degradation of carbon capture reclaimer MEA waste

2013 ◽  
Vol 67 (11) ◽  
pp. 2549-2559 ◽  
Author(s):  
S. Wang ◽  
J. Hovland ◽  
R. Bakke
Keyword(s):  
Removal Efficiency ◽  
Carbon Capture ◽  
Loading Rate ◽  
Nitrogen Concentration ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Cod Removal ◽  
Methane Yield ◽  
Organic Loading Rate ◽  
Cod Removal Efficiency

The anaerobic biodegradation of reclaimer MEA (monoethanolamine) waste (MEAw) with easily degradable co-substrates was investigated in a laboratory-scale bioreactor at room temperature during a 160 d experimental run. The reactor that was constructed with three phases to facilitate attached biofilm and suspended biomass retention for degradation of the complex and challenging MEAw performed well. A feed strategy of step-wise increasing organic loading rate (OLR) by either increasing feed MEAw concentration or the hydraulic loading rate was applied. The system performance was evaluated by chemical oxygen demand (COD) removal efficiency, methane yield, MEA removal, and the accumulation of ammonia and volatile fatty acid (VFA). The total COD removal efficiency initially was 93% when the feed was mainly easily degradable co-substrate. The total removal dropped to 75% at the end when MEAw constituted 60% of the feed COD. Ion chromatography results show that the MEA and some unidentified feed chemicals were almost completely consumed. The main products of MEAw degradation were ammonia, VFAs and biogas. The ammonia nitrogen concentration reached about 2.0 g/L, which may explain the observed inhibition of acetoclastic methanogenesis leading to acetate accumulation. Methane accounted for up to 80% of the biogas generated. The highest methane yield was 0.34 L/g-COD while the yield was 0.16 L/g-COD at the highest load. This study shows that more than 80% reclaimer MEAw COD degradation with a co-substrate can be maintained in a hybrid anaerobic bioreactor operated in a wide loading range.

scholarly journals Automotive fleet repair facility wastewater treatment using air/ZVI and air/ZVI/H2O2 processes

2017 ◽  
Vol 43 (3) ◽  
pp. 24-31 ◽  
Author(s):  
Jan Paweł Bogacki ◽  
Hussein Al-Hazmi
Keyword(s):  
Wastewater Treatment ◽  
Removal Efficiency ◽  
Treatment Effectiveness ◽  
Ph Value ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Process Time ◽  
Process Conditions ◽  
Cod Removal Efficiency ◽  
Repair Facility

AbstractAdvanced automotive fleet repair facility wastewater treatment was investigated with Zero-Valent Iron/Hydrogen Peroxide (Air/ZVI/H2O2) process for different process parameters: ZVI and H2O2doses, time, pH. The highest Chemical Oxygen Demand (COD) removal efficiency, 76%, was achieved for ZVI/H2O2doses 4000/1900 mg/L, 120 min process time, pH 3.0. COD decreased from 933 to 227 mg/L. In optimal process conditions odor and color were also completely removed. COD removal efficiency was increasing with ZVI dose. Change pH value below and over 3.0 causes a rapid decrease in the treatment effectiveness. The Air/ZVI/H2O2process kinetics can be described as d[COD]/dt = −a [COD]tm, where ‘t’ corresponds with time and ‘a’ and ‘m’ are constants that depend on the initial reagent concentrations. H2O2influence on process effect was assessed. COD removal could be up to 40% (560 mg/L) for Air/ZVI process. The FeCl3coagulation effect was also evaluated. The best coagulation results were obtained for 700 mg/L Fe3+dose, that was slightly higher than dissolved Fe used in ZVI/H2O2process. COD was decreased to 509 mg/L.

Treatment of synthetic kraft evaporator condensate using thermophilic and mesophilic membrane aerated biofilm reactors

2010 ◽  
Vol 61 (7) ◽  
pp. 1749-1756 ◽  
Author(s):  
B. Q. Liao ◽  
M. R. Zheng ◽  
L. Ratana-Rueangsri
Keyword(s):  
Comparative Study ◽  
Chemical Oxygen Demand ◽  
Removal Efficiency ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Batch Reactors ◽  
Sequencing Batch Reactors ◽  
Biofilm Reactors ◽  
Cod Removal Efficiency

A comparative study on the treatment of synthetic kraft evaporator condensate was conducted using thermophilic (55°C) and mesophilic (30°C) membrane aerated biofilm reactors (MABRs) and sequencing batch reactors (SBRs) for 8 months. Under tested conditions, a chemical oxygen demand (COD) removal efficiency of 80–95% was achieved with both thermophilic and mesophilic MABRs and SBRs. The COD removal efficiency of thermophilic MABR (80–90%) was slightly lower than that of the mesophilic MABR (85–95%) and the thermophilic SBR (90–95%). A significant amount (13–37%) of COD was stripped by conventional aeration in the SBRs, while stripping in MABRs was negligible. Simultaneous COD removal and denitrification were observed in the mesophilic MABR, while the thermophilic MABR contributed mainly for COD removal. Nitrification was not significant in both the thermophilic and mesophilic MABRs. The results suggest that treatment of kraft evaporator condensate is feasible with the use of both thermophilic and mesophilic MABRs in terms of COD removal with the advantages of negligible stripping.

Performance of anaerobic packed-bed system with different media characteristics

1996 ◽  
Vol 34 (5-6) ◽  
pp. 453-459 ◽  
Author(s):  
Joo-Hwa Tay ◽  
S. Jeyaseelan ◽  
Kuan-Yeow Show
Keyword(s):  
Specific Surface ◽  
Pore Size ◽  
Surface Area ◽  
Removal Efficiency ◽  
Specific Surface Area ◽  
Oxygen Demand ◽  
Specific Area ◽  
Packed Bed ◽  
Cod Removal ◽  
Cod Removal Efficiency

The effects of media specific surface area, porosity, and pore size on the performance of upflow anaerobic packed-bed reactors (APBRs) were examined in the laboratory. The results showed that, the APBR containing media of the lowest surface area but the largest pore size and porosity, demonstrated the highest chemical oxygen demand (COD) removal efficiencies of 90% and 73% at loading rates of 8 and 16 g COD/L.day, respectively. An increase of over 40% in specific area in an APBR had not improved the removal efficiency, instead it produced 16% lower in COD removal efficiency at loading rate of 16 g COD/L.d. A study on the effects of effluent recycle indicates that the APBR having the largest pore size and porosity benefited from the recirculation. The reactor exhibited an increase in overall COD removal efficiency of 8% and a substantial decrease in effluent COD concentration of 30%. The results suggest that media pore size and porosity play a more significant role than media specific surface area in the performance of upflow APBRs.

scholarly journals Improved removal performance and mechanism investigation of papermaking wastewater treatment using manganese enhanced Fenton reaction

2018 ◽  
Vol 77 (10) ◽  
pp. 2509-2516 ◽  
Author(s):  
Yingcai Wang ◽  
Can Wang ◽  
Shuai Shi ◽  
Shuai Fang
Keyword(s):  
Removal Efficiency ◽  
Fenton Reaction ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Pseudo First Order Reaction ◽  
Kinetic Rate Constant ◽  
Practical Applications ◽  
Cod Removal Efficiency ◽  
Fenton System ◽  
Papermaking Wastewater

Abstract The effects of Mn(II) on Fenton system to treat papermaking wastewater and the mechanism of Mn(II) enhanced Fenton reaction were investigated in this study. The chemical oxygen demand (COD) removal efficiency was enhanced in the presence of Mn(II), which increased by 19% compared with that of the Fenton system alone. The pseudo-first order reaction kinetic rate constant of Mn(II)/Fenton system was 2.11 times higher than that of Fenton system. 67%–81% COD were removed with the increasing Mn(II) concentration from 0 to 0.8 g/L. COD removal efficiency was also enhanced in a wider pH range (3–7), which indicated the operation parameters of Fenton technology could be broadened to a milder condition. The study of the mechanism showed that Mn(II) participated in the oxidation and coagulation stages in Fenton system. In the oxidation stage, Mn(II) promotes the production of HO2•/ O2•−, then HO2•/ O2•− reacts with Fe(III) to accelerate the formation of Fe(II), and finally accelerates the production of HO•. Meantime MnMnO3 and Fe(OH)3 forms in the coagulation stage, facilitating the removal of suspended substances and a large amount of COD, which enhances the overall COD removal of papermaking wastewater. This study provided a detailed mechanism to improve practical applications of Fenton technology.

Sign in / Sign up

Export Citation Format

Share Document