scholarly journals Automatic Aquarium Cleaner and Fish Feeder Based on Microcontroller Atmega8535

2021 ◽  
Vol 3 (2) ◽  
pp. 155-163
Author(s):  
Bisman Perangin-angin ◽  
Teopilus Andri Putra Ginting

The design of an aquarium cleaner and automatic fish feeder based on the Atmega8535 microcontroller has been successfully carried out. Testing is carried out after all components are integrated into one including the overall program that has been made. Testing is done by running the system according to the procedure and observing the system's performance, starting with measuring turbidity and checking the water replacement schedule. The work processes running on the system are analyzed after testing. When the water turbidity level is high, the drain pump will activate and pump water out of the aquarium. After the remaining water level is about 25%, the drain pump will stop, and the filling pump will be active. The fill pump runs until the water level reaches 100% and then shuts down. After 10 minutes of filling the water, the servo motor will move and drop the fish feed into the aquarium.

In December 2015 and usually once in a year, the population of Temerloh’spatin fish was the environmental issue gripping Pahang. The fishes, bred in special breeding cages made of y-bar steel along the riverbanks of Sungai Pahang are threatened with a massive die-off. This low water level problems becomes worsen as more forests in the upper reaches of the Ulu Jelai and Ulu Tembeling areas are cleared for timber. Instead of that, due to the low water level and high water turbidity, y-bar steel Patin fish cages facing corrosion problem in unpredicted time. Though, this paper is to investigate the impact of heavy metal and water turbidity level on corroded y-bar steel at specified location adjacent to the fish cages. In this work, samples were submerged into the Pahang river for 56 days in February 2016. The sample then must be weighing before and after being submerged. The river water samples were took out at specific time and subjected to heavy metal and water turbidity test. It was found that, the concentration of Cu and Fe and also water turbidity level that occur in water caused by fish pallet or fish food also contribute and increase the weight loss of the Y-bar.


2019 ◽  
Vol 6 (2) ◽  
pp. 72
Author(s):  
Anak Agung Arta Darmika ◽  
I Gusti Agung Putu Raka Agung ◽  
Yoga Divayana

Technological developments have encouraged many human lives in automatic matters. One of the uses of the rapidly developing electronics field is the application of household appliances. This study will be made a prototype of fish feed and water replacement in the aquarium of ATmega328P microcontroller based. This prototype aims to facilitate feeding of fish and replacing water in the aquarium. The sensor reading is using an ultrasonic sensor to control the amount of fish feed which when the feed runs out will be marked with a buzzer that lights up. The system for regulating fish feeding and replacement of water is regulated by the DS1307 Real Time Clock IC with a display in a 20x4 cm LCD. A valve opening for fish feed containers uses a servo motor. The program used in designing this prototype is to use the C Programming Language. The results achieved in this study are fish feed schedules and water changes can be arranged with a switch button with a twice daily feeding schedule and water replacement every three days. Another condition that is achieved is the servo motor and the water drain pump can work according to the schedule of the time that has been arranged. The conclusion of this research is that the prototype of fish feed and water replacement can already be implemented using the ATmega328P microcontroller. The fish feeder prototype can realize wave reflections from the ultrasonic sensor when the feed has run out, and it will automatically move the servo motor to open the valve, and the buzzer will sound if the fish feed is below 20%.


ELKHA ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 99
Author(s):  
Ali Basrah Pulungan ◽  
Aditya Manggala Putra ◽  
Hamdani Hamdani ◽  
Hastuti Hastuti

This study aims to make a tool that can monitor the condition of the pH level and water turbidity in fish ponds so that fish growth can be maximized. This fish pond has a control system that can be controlled automatically. The purpose of using this control is to get maximum results and to save water use in fish ponds This tool has two sensors consisting of a TDS-10 sensor which functions to detect the turbidity level of water in fish ponds and a pH sensor which functions to detect the pH level of the water in the fish pond. Comparison with previous research, the application of fish ponds with a size of 3 x 4 meters so that observations about how the tools work and the success rate of the tools can be observed more intensively. In addition, the ESP8266 wifi module is supported as a collaboration monitoring center without the need to come to the location directly Based on the test results of the TDS-10 sensor and pH sensor that have been carried out in the fish pond, the test results show good performance with the proportion of detection error of the TDS-10 sensor (4.8 NTU) to the set point (5 NTU) is 4%.


Author(s):  
Andrey Aleksandrovich Chemagin

The article focuses on the studies carried out in the flooded floodplain of the small river Varpak in the basin of the lower Irtysh during the spring flood (in May). The influence of abi-otic factors on the distribution of fish, including juveniles of cyprinids, percids and pike was analyzed. It was found that during the research period there was a direct correlation between the fish density and the temperature and water level, i.e. the fish density increased, as well as the mentioned indicators. There was found the regularity of decreasing the proportion of percids and fish density along with increasing water turbidity in the periods of the southern (S) and south-western (SW) winds, which is stipulated by the wind and wave fish set-down and their independent movement to the shallow areas of the flooded floodplain; In the periods of the north (N) and northeast (NE) winds the fish density increased along with water turbidity, i.e. the fish moved from the shallow water zones to the open water area. The investigated section of the Varpak River is open to the winds of the mentioned directions due of its location and relief. When considering the direction of the fish density distribution during the period of wind events S, SW, N and NE, there has been registered the similarity between the wind direction and the fish distribution in the water area of the floodplain. As a result of the analysis during the observation period the influence of the turbidity factor on the distribution of fish is noted; the greater turbidity, the greater the proportion of cyprinids and the lower the proportion of percids, which can be explained by the specific behavior of these groups of fish. Thus, there is a direct and indirect effect of a number of environmental factors (temperature and water level, wind phenomena and turbidity) on the characteristics and dynamics of fish distribution in the flooded floodplain of the river in the spring period


Author(s):  
Budi Prijo Sembodo ◽  
Novendra Geofanda Pratama

Indonesia is an endemic area for the spread of one of the most popular ornamental fish, namely the largest betta fish in the world. In exploring their hobbies such as raising ornamental fish such as betta fish, efficient and automatic tools are more needed by betta fish farmers in aquariums today, when they have no free time or are drained by other work. This study aims to be a more automatic and efficient tool for everyone to feed fish, provide lighting, and drain aquarium water automatically, so that owners of ornamental fish do not have to worry about what ornamental fish need in the aquarium. The feeding system, in this case uses an Arduino-based control that controls the servo motor as an open and close system as the exit of fish feed into the aquarium. Aquarium lighting system, in this system uses a light sensor type LDR (Light Dependent Resistor). Automatic aquarium drain system, controlled by Arduino with water pump output. In the research, the LDR sensor will give a signal to the relay and give output to the 220 V lamp, that is, if the light intensity is below 028.7 Lux, which is above half past 6 pm and will turn off the 220 volt lamp if the light intensity is above 203.4 Lux, which is above 6 am. The servo motor will operate twice a day for feeding according to the betta fish feed needs, which is 2 times a day. The water pump will work every 4 days to drain the water automatically according to the turbidity of the water based on the time and number of betta fish in the aquarium.


2021 ◽  
Vol 10 (17) ◽  
pp. e95101724306
Author(s):  
Álefe Chagas de Lima Costa ◽  
Antonio Dennys Melo de Oliveira ◽  
João Pedro Soares Caraciolo ◽  
Leandro Ricardo Rodrigues de Lucena ◽  
Maurício Luiz de Mello Vieira Leite

Forage cactus is perennial growth plant, resistance to drought adaptation to hot climate regions, being considered important for the development of livestock. In this study objective was estimate the morphometrics measures of forage cactus Giant Sweet clone associate the optimal levels water and salt. Design used was completely randomized, composed of four levels of water replacement, using the crop evapotranspiration (25, 50, 75 and 100%.Etc) and four levels of salinity (0, 2, 4 and 8 dS/m), obtained through the concentrations of (NaCl) salts corresponding to 0, 1.16, 2.32 and 4.64 g/L, respectively. The morphometric measures of cladodes were evaluated 20 times during the experimental period. Response surface was used to estimate the optimal levels water and salt that maximizing the morphometric measures of the cladodes. Water level in range of 54% and 64%, and 3.5 to 5.3 dS/m of saline level promote greater development of the Giant Sweet clone without changing the morphological characteristics of plant, generating greater phytomass yield.


1979 ◽  
Vol 32 (1-4) ◽  
pp. 1-54 ◽  
Author(s):  
Frank Chapman Bellrose ◽  
Fred L. Paveglio ◽  
Donald W. Steffeck

1.—The bottomland (backwater) lakes of the Illinois River valley embrace about 28,500 ha (70,000 acres) and attract hundreds of thousands of waterfowl during their fall and spring migrations. All of these backwater lakes except Peoria Lake are lateral to the river channel. 2.—The Illinois River occupies a valley much older than the river itself as a result of a series of unique geological events. This valley in essence was the Mississippi River valley before the Wisconsinan glaciation. Its bottomland lakes developed because the river's remarkably low rate of fall resulted in its aggrading rather than degrading. 3.—Unfortunately, the very principles of sedimentation that created the lakes also set the stage for their extinction. Under pristine conditions this extinction would have taken hundreds, perhaps thousands, of years, but man, through intensive use of the land, has greatly accelerated the process.   4.—Aquatic and terrestrial habitats of the Illinois Valley have suffered a series of cataclysmic events since 1900: first, a permanent rise in water level from water diverted from Lake Michigan; second, the draining of more I Aug. 1979 Bellrose et al.; Waterfowl and the Changing Illinois Valley 49 than half of the 161,878-ha (400,000- acre) floodplain through the construction of levees and pumping stations; third, an upsurge in untreated urban and industrial pollution during the 1920's; fourth, the creation of a 2.7-m (9-ft) channel and its attendant navigation dams in the 1930's; and fifth, an acceleration in sedimentation rates following World War II, apparently resulting from an increase in the amount of open row crops grown within the basin. 5.—Waterfowl food plant resources have been dramatically altered by the many changes wrought by man. Factors that have directly affected the species composition and abundance of the wetland plants are (1) fluctuating water levels, (2) water turbidity, (3) water depth, and (4) competition between plant species. 6.—Fluctuating river levels adversely affect the development of aquatic and marsh vegetation on those bottomland lakes connected with the river at all stages. In the early years of the study, the more the lakes were separated from the river, the more extensive were their aquatic and marsh plant beds. 7.—During the earlier years of the study, aquatic and marsh plants disappeared from those lakes connected with the river at all water stages (and thus subject to water-level fluctuations). During the later years of the study, aquatic plants disappeared and the area of marsh plants greatly declined in all lakes, even in those enjoying a degree of separation from the river and minimal water-level fluctuations. Increases in water turbidity and bottom softness, stemming from sedimentation, appear to be responsible. 8.—However, low levees and pumps have increasingly been used to dewater all or part of the lake basins. This procedure controls small summer fluctuations and exposes mud flats for the development of moist-soil plants between 15 July and 15 October. Moist soil plants—millets, smartweeds, nutgrasses, rice cutgrass, water hemp, and teal grass—produce an abundance of seed palatable to many species of ducks. Low summer water levels permit or expedite dewatering. Summer rises that overtop low levees usually destroy moist-soil plant beds. 9.—Sedimentation is rapidly filling in the bottomland lakes of the Illinois Valley, reducing their size, degrading water quality, and minimizing the diversity of bottom depths. The fine silts and clays deposited on the bottoms when river waters invade bottomland lakes are readily resuspended by wave action and the activity of rough fish. The consequent turbidity reduces the euphotic zone to such a shallow depth that aquatic plants can no longer survive. Marsh plants have difficulty maintaining footings as bottom soils become softer. 10.—.Sedimentation occurs at a higher rate in deep water than in shallow water. Thus, most lakes now possess a uniform bottom instead of the turn-of-the century variation in bottom depths. (Peoria Lake, through which the river channel passes, is an exception.) Lake basins are now platter shaped. Estimated life expectancies are 33 years for Lake Depue, 92 years for Lake Chautauqua, and 90 years for Meredosia Bay. 11.—The abundance of certain species of waterfowl in the Illinois Valley is related to the abundance of native food resources. Among the dabbling ducks, the size of fall populations of the pintail, green-winged teal, and wigeon correlated with the abundance of wetland plants. Mallards feed extensively on waste grain in harvested fields, but even so, when annual variations in the continental mallard population were taken into account, moist-soil plant abundance influenced the abundance of mallards. Diving duck populations were unrelated to wetland plant abundance. However, when a catastrophic loss of fingernail clams occurred, diving duck numbers crashed. Neither this food resource nor the population of diving ducks has recovered in the ensuing two decades. 12.—Fall river levels determine the depths in bottomland lakes and thus the availability of moist-soil plant foods. If the river is low and mud flats are exposed, moist-soil plant seeds will be unavailable to waterfowl. If, on the other hand, the river is high and mud flats are too deeply submerged, the result is the same. The higher the fall rise in water, the greater the reduction in numbers of green-winged teal, with the same influence to a lesser degree on pintails, wigeons, and mallards. 13.— As a result of the disappearance of aquatic plants and the prohibition of baiting, private duck clubs, the Illinois Department of Conservation, and the U.S. Fish and Wildlife Service have placed increasing emphasis on controlled dewatering of wetland habitats. Private duck clubs control 23,198 ha (57,320 acres) of land and water in the Illinois Valley and have 6,723 ha (16,612 acres) under varying degrees of low water level control. State and federal agencies control 15,644 ha (38,656 acres) and have 4,688 ha (11,585 acres) under similar water-level management.


2019 ◽  
Vol 26 (4) ◽  
pp. 38-42
Author(s):  
Ahmed Ibrahim

The study aims to show effect of adding the circular perforated plates in sedimentation basin in horizontal position on the efficiency of the sedimentation basin as was the use of perforated panels with circular holes and placed inside the sedimentation basin and took two levels of turbidity of the water 125 and 150 NTU respectively in the Tigris river during the preparation of the study with variable hydraulic load and the efficiency was calculated at each case of plates in the basin where the variables that were adopted is the number of perforated panels so that the ratio of the area of holes/total area of panel is 20% , and also variation in water turbidity levels and the hydraulic load. The result showed a significant decrease in the output turbidity levels from sedimentation tank with the use of perforated panels at the raw water turbidity 150 NTU and hydraulic load between 0.9 and 1.2 m3/m2.hr were 95% higher efficiency when three panels were put and hydraulic load 0,9 m3/m2.hr, while there was fluctuation with some of hydraulic load levels at turbidity level of 125 NTU and same number of panels


2021 ◽  
Vol 2 (2) ◽  
pp. 66-72
Author(s):  
Udin ◽  
Heliawati Hamrul ◽  
Muh. Fuad Mansyur

Water is very important for the life of living things on earth. The function of water for life cannot be replaced, but water taken directly from springs often experiences turbidity which usually occurs during the rainy season where excessive rainwater intensity can affect the clarity of the water flowing into people's homes. From this problem, it is necessary to design a monitoring sistem for the turbidity of water flowing into the main tank which can be monitored via laptops, computers or cellphones that have internet access that can monitor in real-time and in the form of graphs and data stored in My Structured Query language (mysql) in this design. Using the nodemcu esp8266 which controls the tool in the design, the turbidity sensor is used to detect water turbidity, the ultrasonic sensor is used to detect the water level in the main tank, the relay is used to control the electric current, the solenoid valve is used to close the valve according to the conditions given with the design results of 120 ntu down and water height > 15 cm then the on relay and solenoid valve open the valve so that water can flow into the reservoir, while 121 ntu up and water height < 5 cm then the off relay and solenoid valve close the valve, the test is done using blackbox testing and the results of this test that the function on the sistem is 100% appropriate.


Sensor Review ◽  
2015 ◽  
Vol 35 (1) ◽  
pp. 98-105 ◽  
Author(s):  
Mohd Taufiq Mohd Khairi ◽  
Sallehuddin Ibrahim ◽  
Mohd Amri Md Yunus ◽  
Mahdi Faramarzi

Purpose – This paper aims to present a review of the design and development of the turbidimeter for measuring the turbidity level in water. Monitoring the turbidity level of water is important because it is related to public health. Design/methodology/approach – A precise and reliable turbidimeter can provide vital data that reveals the water condition level. Several turbidimeter units are discussed briefly. Three types of turbidimeter design – single beam, ratio and modulated four beams – are elaborated with some illustrations of the design concept. Various improvements and innovations for upgrading turbidimeter design are also discussed. Findings – This paper elaborated on a new method of estimating the water turbidity level in water samples using an optical tomography system based on the independent component analysis method. The results showed that a tomography-based turbidimeter can measure slight changes in the level of turbidity when the volume of contaminants is changed slightly. The turbidimeter can also provide a profile of the distribution of the turbidity in the water sample. Originality/value – A turbidimeter based on the optical tomography concept can be a valuable tool in determining the level of pollution in rivers, sea, etc.


Sign in / Sign up

Export Citation Format

Share Document