scholarly journals High-Power Multimodular Matrix Converters and Modulation

2021 ◽  
Author(s):  
Jiacheng Wang
Keyword(s):  
High Power ◽  
Pulse Width Modulation ◽  
Low Voltage ◽  
Input Voltage ◽  
Duty Ratio ◽  
Modulation Scheme ◽  
Switching Frequency ◽  
Space Vector ◽  
Phase Switching ◽  
Matrix Converters

High-power multimodular matrix converters (MMMCs) comprising multiple threephase to single-phase matrix converter modules have emerged as a viable topology candidate for medium-voltage adjustable speed drives. As a combination of direct power conversion and cascaded multilevel structure, the MMMCs inherit features such as elimination of dc capacitors, four quadrant operation capability, employment of lowvoltage devices only, and superior output waveform quality under a limited device switching frequency. Due to their particular topological structure, modulation scheme design for the MMMCs is not straightforward and complicated. The presented work is mainly focused on development of suitable modulation schemes for the MMMCs. Several viable schemes as well as their corresponding switching patterns are proposed and verified by both simulation and experimental results. In order for the MMMCs to produce sinusoidal waveforms at both input and output ac terminals, a direct transfer matrix based modulation scheme is presented. It is revealed that a suitable modulation strategy for the MMMCs should aim at fabricating the total input current on the primary side of the isolation transformer. For topologies with more than two modules in cascade on each output phase, switching period displacement is necessary among modules to generate multilevel output waveforms. An indirect space vector based modulation scheme for the MMMCs is developed. With a few presumptions satisfied and viewed from a certain perspective, the MMMCs can still be modeled indirectly and be divided into fictitious rectifier and inverter stages. Therefore, space vector modulation methods can be independently applied to both stages for duty ratio calculation, before the results are converted and combined for determining per-phase output pulses. A new output switching pattern providing improved harmonic performance is also proposed. A novel modulation scheme based on diode rectifier emulation and phase-shifted sinusoidal pulse-width modulation is proposed. The method sacrifices input power factor adjustment, but enables the use of an indirect module construction leading to significantly reduced device count and complexity. Strategy for reducing additional switchings caused by input voltage ripples is also implemented and explained. In addition to simulation verifications, all the proposed schemes are further tested experimentally on a low-voltage prototype built in the lab. Details about the prototype implementation are introduced.

scholarly journals High-Power Multimodular Matrix Converters and Modulation

2021 ◽  
Author(s):  
Jiacheng Wang
Keyword(s):  
High Power ◽  
Pulse Width Modulation ◽  
Low Voltage ◽  
Input Voltage ◽  
Duty Ratio ◽  
Modulation Scheme ◽  
Switching Frequency ◽  
Space Vector ◽  
Phase Switching ◽  
Matrix Converters

High-power multimodular matrix converters (MMMCs) comprising multiple threephase to single-phase matrix converter modules have emerged as a viable topology candidate for medium-voltage adjustable speed drives. As a combination of direct power conversion and cascaded multilevel structure, the MMMCs inherit features such as elimination of dc capacitors, four quadrant operation capability, employment of lowvoltage devices only, and superior output waveform quality under a limited device switching frequency. Due to their particular topological structure, modulation scheme design for the MMMCs is not straightforward and complicated. The presented work is mainly focused on development of suitable modulation schemes for the MMMCs. Several viable schemes as well as their corresponding switching patterns are proposed and verified by both simulation and experimental results. In order for the MMMCs to produce sinusoidal waveforms at both input and output ac terminals, a direct transfer matrix based modulation scheme is presented. It is revealed that a suitable modulation strategy for the MMMCs should aim at fabricating the total input current on the primary side of the isolation transformer. For topologies with more than two modules in cascade on each output phase, switching period displacement is necessary among modules to generate multilevel output waveforms. An indirect space vector based modulation scheme for the MMMCs is developed. With a few presumptions satisfied and viewed from a certain perspective, the MMMCs can still be modeled indirectly and be divided into fictitious rectifier and inverter stages. Therefore, space vector modulation methods can be independently applied to both stages for duty ratio calculation, before the results are converted and combined for determining per-phase output pulses. A new output switching pattern providing improved harmonic performance is also proposed. A novel modulation scheme based on diode rectifier emulation and phase-shifted sinusoidal pulse-width modulation is proposed. The method sacrifices input power factor adjustment, but enables the use of an indirect module construction leading to significantly reduced device count and complexity. Strategy for reducing additional switchings caused by input voltage ripples is also implemented and explained. In addition to simulation verifications, all the proposed schemes are further tested experimentally on a low-voltage prototype built in the lab. Details about the prototype implementation are introduced.

scholarly journals Full-Bridge Active-Clamp Forward-Flyback Converter with an Integrated Transformer for High-Performance and Low Cost Low-Voltage DC Converter of Vehicle Applications

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 863 ◽  
Author(s):  
Jaeil Baek ◽  
Han-Shin Youn
Keyword(s):  
High Power ◽  
High Performance ◽  
Low Voltage ◽  
Low Cost ◽  
Primary Root ◽  
Input Voltage ◽  
Oxide Semiconductor ◽  
Duty Ratio ◽  
Voltage Range ◽  
Active Clamp

This paper presents a full-bridge active-clamp forward-flyback (FBACFF) converter with an integrated transformer sharing a single primary winding. Compared to the conventional active-clamp-forward (ACF) converter, the proposed converter has low voltage stress on the primary switches due to its full-bridge active-clamp structure, which can leverage high performance Silicon- metal–oxide–semiconductor field-effect transistor (Si-MOSFET) of low voltage rating and low channel resistance. Integrating forward and flyback operations allows the proposed converter to have much lower primary root mean square (RMS) current than the conventional phase-shifted-full-bridge (PSFB) converter, while covering wide input/output voltage range with duty ratio over 0.5. The proposed integrated transformer reduces the transformer conduction loss and simplify the secondary structure of the proposed converter. As a result, the proposed converter has several advantages: (1) high heavy load efficiency, (2) wide input voltage range operation, (3) high power density with the integrated transformer, and (4) low cost. The proposed converter is a very promising candidate for applications with wide input voltage range and high power, such as the low-voltage DC (LDC) converter for eco-friendly vehicles.

scholarly journals Efficiency Boost of a Quasi-Z-Source Inverter: A Novel Shoot-Through Injection Method with Dead-Time

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4216
Author(s):  
Ivan Grgić ◽  
Dinko Vukadinović ◽  
Mateo Bašić ◽  
Matija Bubalo
Keyword(s):  
Pulse Width Modulation ◽  
Dead Time ◽  
Operation Mode ◽  
Input Voltage ◽  
Duty Ratio ◽  
Switching Frequency ◽  
Injection Method ◽  
Laboratory Setup ◽  
Switching Dynamics ◽  
Three Phase

A quasi-Z-source inverter (qZSI) is a single-stage inverter that enables a boost of the input dc voltage through the utilization of a so-called shoot-through state (STS). Generally, the efficiency of the qZSI depends on the utilized STS injection method to a significant extent. This paper presents a novel method of STS injection, called the zero-sync method, in which the STS occurrence is synchronized with the beginning of the zero switching states (ZSSs) of the three-phase sinusoidal pulse width modulation (SPWM). In this way, compared to the conventional STS injection method, the total number of switchings per transistor is reduced. The ZSSs are detected by utilizing the SPWM pulses and the logic OR gates. The desired duration of the STS is implemented by utilizing the LM555CN timer. The laboratory setup of the three-phase qZSI in the stand-alone operation mode was built to compare the proposed zero-sync method with the conventional STS injection method. The comparison was carried out for different values of the switching frequency, input voltage, duty ratio, and load power. As a result of the implementation of the zero-sync method, the qZSI efficiency was increased by up to 4%. In addition, the unintended STSs, caused by the non-ideal switching dynamics of the involved transistors, were successfully eliminated by introducing the optimal dead-time as part of the modified zero-sync method. As a result, the efficiency was increased by up to 12% with regard to the conventional method.

scholarly journals Space Vector Modulation for Three-Level Neutral Point Clamped Inverter

2021 ◽  
Author(s):  
Weixing Feng
Keyword(s):  
High Power ◽  
Neutral Point ◽  
Modulation Scheme ◽  
Switching Frequency ◽  
Space Vector Modulation ◽  
Space Vector ◽  
Digital Implementation ◽  
Even Order ◽  
Simulation Results ◽  
Vector Modulation

For most medium voltage high power applications, Neutral Point Clamped (NPC) three-level inverter is a preferred choice due to its advantages such as low cost, light weight and compact size. Space vector modulation is widely used in real-time digital control for power converters. It is especially suitable for use in NPC multilevel inverters due to its good harmonic profile, flexibility and easy digital implementation. This thesis focuses on the space vector modulation for high power three-level NPC inverter, where the switching frequency of the semiconductor devices is nominally below 1 OOOHz to reduce the power loss of the switching devices. The conventional space vector modulation (SVM) scheme for the three-level NPC inverter produces even order harmonics in the output voltages, which are not desirable for most industrial applications. In this thesis, the mechanism of even order harmonic generation is analysed. A new space vector modulation scheme, which can eliminate all the even order harmonics, is proposed. The performance of the new design is investigated and simulation results are provided for the verification purpose. The harmonic and THD profiles are compared with those of the conventional SVM scheme. The elimination of even order harmonics is achieved at the expense of a slight increase in the switching frequency. The proposed space vector modulation scheme can be applied to other types of converters for the even order harmonic elimination. An algorithm is developed to mitigate the neutral point potential deviation, which is a common problem in the NPC inverters. The simulation results show that this algorithm is suitable for both conventional and the proposed space vector modulation schemes.

scholarly journals A Single-Stage Asymmetrical Half-Bridge Flyback Converter with Resonant Operation

2018 ◽  
Author(s):  
Chung-Yi Ting ◽  
Yi-Chieh Hsu ◽  
Jing-Yuan Lin ◽  
Chung-Ping Chen
Keyword(s):  
Pulse Width Modulation ◽  
Input Voltage ◽  
Resonant Mode ◽  
Voltage Regulation ◽  
Single Stage ◽  
Duty Ratio ◽  
Switching Frequency ◽  
Zero Voltage Switching ◽  
Analysis And Design ◽  
Frequency Controller

This paper proposes a single-stage asymmetrical half-bridge fly-back (AHBF) converter with resonant mode using dual-mode control. The presented converter has an integrated boost converter and asymmetrical half-bridge fly-back converter and operates in resonant mode. The boost-cell always operates in discontinuous conduction mode (DCM) to achieve high power factor. The presented converter operates simultaneously using a variable-frequency-controller (VFC) and pulse-width-modulation (PWM) controller. Unlike the conventional single-stage design, the intermediate bus voltage of this controller can be regulated depending on the main power switch duty ratio. The asymmetrical half-bridge fly-back converter utilizes a variable switching frequency controller to achieve the output voltage regulation. The asymmetrical half-bridge fly-back converter can achieve zero-voltage-switching (ZVS) operation and significantly reduce the switching losses. Detailed analysis and design of this single-stage asymmetrical half-bridge fly-back converter with resonant mode is described. A wide AC input voltage ranging from 90 to 264 Vrms and output 19 V/ 120 W prototype converter was built to verify the theoretical analysis and performance of the presented converter.

scholarly journals Space Vector Modulation for Three-Level Neutral Point Clamped Inverter

2021 ◽  
Author(s):  
Weixing Feng
Keyword(s):  
High Power ◽  
Neutral Point ◽  
Modulation Scheme ◽  
Switching Frequency ◽  
Space Vector Modulation ◽  
Space Vector ◽  
Digital Implementation ◽  
Even Order ◽  
Simulation Results ◽  
Vector Modulation

For most medium voltage high power applications, Neutral Point Clamped (NPC) three-level inverter is a preferred choice due to its advantages such as low cost, light weight and compact size. Space vector modulation is widely used in real-time digital control for power converters. It is especially suitable for use in NPC multilevel inverters due to its good harmonic profile, flexibility and easy digital implementation. This thesis focuses on the space vector modulation for high power three-level NPC inverter, where the switching frequency of the semiconductor devices is nominally below 1 OOOHz to reduce the power loss of the switching devices. The conventional space vector modulation (SVM) scheme for the three-level NPC inverter produces even order harmonics in the output voltages, which are not desirable for most industrial applications. In this thesis, the mechanism of even order harmonic generation is analysed. A new space vector modulation scheme, which can eliminate all the even order harmonics, is proposed. The performance of the new design is investigated and simulation results are provided for the verification purpose. The harmonic and THD profiles are compared with those of the conventional SVM scheme. The elimination of even order harmonics is achieved at the expense of a slight increase in the switching frequency. The proposed space vector modulation scheme can be applied to other types of converters for the even order harmonic elimination. An algorithm is developed to mitigate the neutral point potential deviation, which is a common problem in the NPC inverters. The simulation results show that this algorithm is suitable for both conventional and the proposed space vector modulation schemes.

scholarly journals Experimental validation of new self-voltage balanced 9L-ANPC inverter for photovoltaic applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Jagabar Sathik ◽  
Dhafer J. Almakhles ◽  
N. Sandeep ◽  
Marif Daula Siddique
Keyword(s):  
Output Voltage ◽  
Pulse Width Modulation ◽  
Superior Performance ◽  
Modulation Scheme ◽  
Switching Frequency ◽  
Switched Capacitor ◽  
Renewable Energy Resources ◽  
High Quality ◽  
Multilevel Inverters ◽  
Blocking Voltage

AbstractMultilevel inverters play an important role in extracting the power from renewable energy resources and delivering the output voltage with high quality to the load. This paper proposes a new single-stage switched capacitor nine-level inverter, which comprises an improved T-type inverter, auxiliary switch, and switched cell unit. The proposed topology effectively reduces the DC-link capacitor voltage and exhibits superior performance over recently switched-capacitor inverter topologies in terms of the number of power components and blocking voltage of the switches. A level-shifted multilevel pulse width modulation scheme with a modified triangular carrier wave is implemented to produce a high-quality stepped output voltage waveform with low switching frequency. The proposed nine-level inverter’s effectiveness, driven by the recommended modulation technique, is experimentally verified under varying load conditions. The power loss and efficiency for the proposed nine-level inverter are thoroughly discussed with different loads.

Development of Serial-Connected High Step-Up DC-DC Converter with Single Switch

2013 ◽  
Vol 479-480 ◽  
pp. 535-539
Author(s):  
Van Tsai Liu ◽  
Chien Hao Hsu
Keyword(s):  
Electric Vehicles ◽  
Pulse Width Modulation ◽  
Hybrid Electric Vehicles ◽  
Single Pulse ◽  
Input Voltage ◽  
Duty Ratio ◽  
Leakage Inductance ◽  
High Voltage Gain ◽  
Output Capacitor ◽  
Voltage Spike

In this paper, a novel high step-up DC-DC converter has been designed for fuel cell applications. The proposed high step-up converter can be used for various portable energy storage components such as fuel cells which are used for hybrid electric vehicles (HEV), and light electric vehicles (LEV).The proposed converter is integrated by boost circuit, voltage lift capacitor, and coupled-inductor techniques to achieve high step-up voltage and has several advantages. First, the circuit is controlled by one single pulse width modulation (PWM). Second, the converter consists of active clamp circuit to recycle the leakage inductance and send to output capacitor so that the voltage spike on active switch is suppressed and efficiency is also improved. Third, by using the winding of secondary boost circuit, and voltage lift capacitor techniques, the high voltage gain can be achieved without more than 50% duty ratio, and the slope compensation circuit can also be simplified.Finally, a 1k W prototype converter is implemented, to verify the performance of the proposed converter with input voltage 48V, output voltage 400V, and output power 1k W is also achieved. The highest efficiency is 92.96% at 400W, and the full-load efficiency is up to 90.48%.

scholarly journals Software In-The-Loop Simulation of an Advanced SVM Technique for 2ϕ-Inverter Control Fed a TPIM as Wind Turbine Emulator

Electronics ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 187
Author(s):  
Intissar Moussa ◽  
Adel Khedher
Keyword(s):  
Wind Turbine ◽  
Pulse Width ◽  
Pulse Width Modulation ◽  
Small Scale ◽  
Modulation Scheme ◽  
Space Vector ◽  
Two Phase ◽  
Phase Inverter ◽  
Vector Modulation ◽  
Scheme Selection

An appropriate modulation scheme selection ensures inverter performance. Thus, space vector modulation (SVM) is more efficient and has its own distinct advantages compared to other pulse width modulation (PWM) techniques. This work deals with the development of an advanced space vector pulse width modulation (SVM) technique for two-phase inverter control using an XSG library to ensure rapid prototyping of the controller FPGA implementation. The proposed architecture is applied digitally and in real time to drive a two-phase induction motor (TPIM) for small-scale wind turbine emulation (WTE) profiles in laboratories with minimum current ripple and torque oscillation. Four space voltage vectors generated for the used SVM technique do not contain a zero vector. Hence, for an adequate adjustment of these four vectors, a reference voltage vector located in the square locus is determined. Considering the asymmetry between the main and auxiliary windings, the TPIM behavior, which is fed through the advanced SVM controlled-two-phase inverter (2ϕ-inverter), is studied, allowing us to control the speed and the torque under different conditions for wind turbine emulation. Several quantities, such as electromagnetic torque, rotor fluxes, stator currents and speed, are analyzed. To validate the obtained results using both Simulink and XSG interfaces, the static and dynamic characteristics of the WTE are satisfactorily reproduced. The collected speed and torque errors between the reference and actual waveforms show low rates, proving emulator controller effectiveness.

Sign in / Sign up

Export Citation Format

Share Document