scholarly journals Using Oil Sludge in the Production of Lightweight Bricks

2021 ◽  
Vol 135 (4) ◽  
pp. 40-45
Author(s):  
V. Z. Abdrakhimov ◽  
◽  
E. S. Abdrakhimova ◽  

Efficient utilization of multi-tonnage oil sludge is one of the most pressing environmental problems. Since natural raw materials are currently depleted, it is necessary to involve oil sludge in the production turnover for the production of lightweight bricks. At the same time, the costs of geological exploration, construction and operation of quarries are excluded, and significant land plots are exempt from the impact of negative anthropogenic factors. Waste from oil production with an increased content of calorific value is advisable to use not only as a thinning agent, but also as burn-out additives for the production of thermal insulation materials, which include lightweight bricks. A lightweight brick, which belongs to class B with high physical and mechanical properties, was obtained.

2020 ◽  
Vol 2020 (3) ◽  
pp. 24-31
Author(s):  
Z Galimova ◽  
◽  
H Babakhanova ◽  
M Abdunazarov ◽  
I Ismoilov ◽  
...  

Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility of using pulp from the inner layer of mulberry twig bark. Mulberry twigs, after removing leaves, which are the main raw material in silk production, have no practical industrial application. Recycling waste - mulberry branches - for the production of pulp is therefore relevant as it is aimed at solving raw material and environmental problems. The purpose of this work is to use local raw materials for paper production, study the impact of processing method of the grinding process on paper forming properties. During grinding the mechanical processes of changes of fibers determine mainly structure of a paper sheet, and colloidal-physical processes - bind and ability of fibers to form strong, homogenous and smooth structure of paper. The structure of the sheet of paper facilitates excessive or "selective" ink absorption into the pores of the paper and thus predetermines the quality of reproduction during the printing process. Methods for determining the physical and mechanical properties of papers were used in this work, and changes in the surface structure of samples cast at various technological modes of the milling process were studied. The results of the study revealed that the addition of cellulose mass from the inner layer of mulberry twig bark helps to obtain a strong paper. The optical properties of the paper, which contains cotton and cellulose from the inner layer of mulberry branch bark, are explained by the whiteness of the added fibers themselves. The strength properties of the paper at a weight grinding degree of 300 CWR are explained by the bond between the split and strongly interwoven fibers of the cellulose fibers. It has been established that the addition of more than 30% cellulose from the inner layer of the mulberry branch bark to the paper pulp mass is undesirable, as this adversely affects the whiteness of the paper


2011 ◽  
Vol 3 (1) ◽  
pp. 7
Author(s):  
Sari Mirad Noor

The need of log increace rapidly, mean while forest product decrease, so efficiency on wood process should be done wisely, in the other hand plastic waste is uncompossed material, become an environmental problems. This research aims to determine the impact of particles of type HDPE plastic wastes and twigs/branches of rubber on some physical and mechanical properties of wood. Physical properties have been tested for water content, density, thickness, and water absorption. Although mechanical properties tests were tough Broken/Module of Rufture (MOR) and the preservation of architecture/modulus of elasticity (MOE).     The raw materials used are polyethylene of high density of waste plastic and rubber adhesive urea formaldehyde branch branch. Experimental design used the randomized Completely Design (RCD) 5 x 4, in which each treatment became much like 5 times replicated).The treatment used is the diversity of the composition of the waste of plastic of different types of polyethylene of high density provides a significant effect on the content of water, water absorption, the density and the development of thickness. With regard to the persistence and the fracture of the arch determination not to give a significant effect.Keywords: physical and mechanical properties, particle board, HDPE plastic waste, branch/twig of  rubber.


Author(s):  
V. Z. Abdrakhimov ◽  
E. S. Abdrakhimova

The reduction in the reserves of traditional natural raw materials makes us look for new ways to replace it with different types of waste. At the same time, the costs of exploration, construction and operation of quarries are excluded, and significant land plots are exempt from the impact of negative anthropogenic factors. The experience of advanced foreign countries has shown the technical feasibility of this direction and its application as a tool for protecting the natural environment from pollution. On the basis of inter-shale clay and high-alumina nanotehnologija raw materials petrochemical spent catalyst IM-2201 NovoKuibyshev petrochemical plant derived ceramic brick with high physical-mechanical properties without the use of traditional natural materials. Using nanotechnogenic petrochemicals - spent catalyst IM-2201, containing more than 70% A12O3, a ceramic brick was obtained that corresponds to the M200 brand. It is possible to build load-bearing walls of the lower floors of high-rise buildings (15 floors or more) from M200 ceramic bricks. Innovative proposals for the use of industrial waste: interslant clay and spent catalyst in the production of high-strength ceramic earthquake-resistant bricks with high strength and frost resistance have been developed. The absolute advantage of using multi-tonnage waste of the spent IM-2201 catalyst and inter-shale clay for the waste of oil shale is the unloading of the environmental situation.


2021 ◽  
Vol 280 ◽  
pp. 11015
Author(s):  
Tetiana Derkach ◽  
Hanna Tarasenko

The degree of variability in the composition of herbal medicines was studied on the example of the preparation of St. John's wort from various Ukrainian producers. The Cu and Zn contents were the most stable compared to other (Fe, Mn, Co, Cr, Ni, Pb, Cd) microelements among plants of different origins. The content of toxic elements (Pb, Cd) did not exceed the established standards. Meanwhile, a 2-3-fold concentration difference was observed for hyperforin, an active pharmaceutical ingredient in St. John’s wort. Thus, the existing standards do not ensure the stability of the composition of herbal preparations. As a result, the quality of medicinal drugs can be significantly different. The key reason for the variation in plant composition is environmental influence, including anthropogenic factors. Existing training programs for prospective specialists of the pharmaceutical industry do not pay enough attention to the impact of the environment on the quality of herbal raw materials. Necessary changes to the syllabi of relevant disciplines are formulated to eliminate this shortcoming and ensure sustainable development of raw materials sources for the pharmaceutical industry.


2018 ◽  
Vol 760 ◽  
pp. 132-138
Author(s):  
Lenka Nevřivová

In this research, the impact of firing temperature and MgO addition on mechanical and physical properties of self–compacting no-cement castables were investigated. For this propose up to 3.3 wt % of MgO was added to the corundum castable compositions and the specimens were fired at 600 °C, 800 °C, 1000°C, 1200°C and 1500°C. The mixtures were made so that the consistency of each one was the same. There were only minimal differences in the mixtures water content. The mineral composition of the input raw materials for manufacturing of the refractory castables was determined. The physical and mechanical properties of castable compositions such as self-flow values, bulk density, apparent porosity, cold crushing strength and flexural strength were examined. Also, the X-ray diffraction (XRD) and scanning electron microscopy (SEM/EDX) techniques were used for detection the ceramic phase formation. The corrosion resistance was determined by means of the crucible test according to ČSN P CEN/TS 15418 (726022) Method of test for dense refractory products – Guidelines for testing the corrosion resistance of refractories caused by liquids. The study follows up on research, the results of which were published last year [1], but the study is focused to self-compacting refractory castable.


2015 ◽  
Vol 26 (3-4) ◽  
pp. 116-123
Author(s):  
A. P. Korzh ◽  
T. V. Zahovalko

Recently, the number of published works devoted to the processes of synanthropization of fauna, is growing like an avalanche, which indicates the extreme urgency of this theme. In our view, the process of forming devices to coexist with human and the results of his life reflects the general tandency of the modern nature evolution. Urbanization is characteristic for such a specific group of animals like amphibians, the evidence of which are numerous literature data. Many researchers use this group to assess the bioindicative quality of the environment. For this aim a variety of indicators are used: from the cellular level of life of organization up to the species composition of the group in different territories. At the same time, the interpretation of the results is not always comparable for different areas and often have significantly different interpretations by experts. Urban environment, primarily due to the contamination is extremely aggressive to amphibians. As a consequence, the urban populations of amphibians may be a change in the demographic structure, affecting the reproductive ability of the population, the disappearance of the most sensitive species or individuals, resizing animals, the appearance of abnormalities in the development, etc. At the same time play an important amphibians in the ecosystems of cities, and some species in these conditions even feel relatively comfortable. Therefore, it is interesting to understand the mechanisms of self-sustaining populations of amphibians in urban environments. To assess the impact of natural and anthropogenic factors on the development of amphibian populations were used cognitive modeling using the program Vensim PLE. Cognitive map of the model for urban and suburban habitat conditions were the same. The differences concerned the strength of connections between individual factors (migration, fertility, pollution) and their orientation. In general, factors like pollution, parasites, predators had negative impact on the population, reducing its number. The birth rate, food and migration contributed to raising number of individuals. Some of the factors affected on the strength to of each other as well: the majority of the factors affected the structure of the population, had an influence on the fertility. Thanks to it the model reflects the additive effect of complex of factors on the subsequent status of the population. Proposed and analyzed four scenarios differing strength and duration of exposure. In the first scenario, a one-time contamination occurs and not subsequently repeated. The second and third scenario assumes half board contamination, 1 year (2 scenario) and two years (scenario 3). In the fourth scenario, the pollution affected the population of amphibians constantly. In accordance with the results of simulation, much weaker than the natural populations respond to pollution - have them as an intensive population growth and its disappearance at constant pollution is slow. Changes to other parameters of the model showed that this pollution is the decisive factor -only the constant action leads to a lethal outcome for the populations. All other components of the model have a corrective effect on the population dynamics, without changing its underlying trand. In urban areas due to the heavy impact of pollution maintaining the population is only possible thanks to the migration process – the constant replenishment of diminishing micropopulations of natural reserves. This confirms the assumption that the form of existence metapopulations lake frog in the city. In order to maintain the number of amphibians in urban areas at a high level it is necessary to maintain existing migration routes and the creation of new ones. Insular nature of the placement of suitable habitats in urban areas causes the metapopulation structure of the types of urbanists. Therefore, the process of urbanization is much easier for those species whicht are capable of migration in conditions of city. In the initial stages of settling the city micropopulationis formed by selective mortality of the most susceptible individuals to adverse effects. In future, maintaining the categories of individuals is provided mainly due to migration processes metapopulisation form of the species of existence is supported). It should be noted that the changes in the previous levels are always saved in future. In the case of reorganizations of individuals we of morphology can assume the existence of extremely adverse environmental conditions that threaten the extinction of the micropopulations. 


Author(s):  
I. Saakian ◽  
Aleksandr, Grigor’ev ◽  
E. Kravets ◽  
E. Rudakov ◽  
A. Faddeev ◽  
...  

Выполнен анализ действующей редакции Методики разработки нормативов допустимых сбросов веществ и микроорганизмов в водные объекты для водопользователей , утвержденной приказом Минприроды России от 17 декабря 2007 г. 333, на предмет непротиворечивости и соответствия нормам водоохранного законодательства. Выявлена неопределенность применения Методики в условиях воздействия на качество воды природных и антропогенных факторов, не зависящих от конкретного водопользователя. Положения Методики противоречат принципам нормирования воздействия на водные объекты на основе наилучших доступных технологий, что было показано на примерах утвержденных технологических показателей содержания загрязняющих веществ в сточных водах различных отраслей промышленности. Анализ системы нормирования допустимых воздействий на водные объекты и географической дифференциации нормативов качества воды в пределах Российской Федерации вместе с системой целевых показателей качества воды также показал несоответствие Методики основным принципам водоохранного законодательства.The analysis of the current edition of the Methods of developing standards for permissible discharges of substances and microorganisms into water bodies for water users , approved by the Order of the Ministry of Natural Resources of Russia dated December 17, 2007 No. 333 for consilience and compliance with the regulations of the water protection legislation, is carried out. Uncertainty of the application of the Methods in the conditions of the impact of natural and anthropogenic factors that are independent of a specific water user on the quality of water has been identified. The provisions of the Methods contradict the principles of regulating the impact on water bodies based on the best available technologies shown on the examples of approved process indicators of the concentrations of various industrial pollutants in wastewater. An analysis of the system of regulating the permissible impact on water bodies and the geographical differentiation of water quality standards within the boundaries of the Russian Federation, together with the system of water quality targets, also showed that the Methods do not comply with the basic principles of the water protection legislation.


This article presents the results of studying the impact of housing and feeding conditions on broiler chickens of Hubbard RedBro cross, as well as the quality of products obtained when using floor and cage content, in a farm. It established that when receiving a mixed feed of own production using feed raw materials grown on a farm without the use of pesticides, a statistically significant decrease in potentially dangerous substances for animal health is recorded. Compared with factory feed, it has reduced the content of pesticides by 14 times, and mercury and arsenic by 24 times, cadmium by five times, and lead by ten times. The results of the study of economic indicators of growing Hubbard RedBro cross broiler chickens, as well as the chemical composition and quality of carcasses, indicated that there was no significant difference between the floor and cell conditions of keeping. Still, the use of a diet based on eco-feeds contributed to a statistically significant decrease in the concentration of toxic metals in the muscles of the poultry of the experimental groups. As a result, it found that the use of the studied compound feed in the diets of broiler chickens increased the indicators of Biosafety and ensured the production of environmentally safe ("organic") poultry meat products.


Domiati cheese is the most popular brand of cheese ripened in brine in the Middle East in terms of consumed quantities. This study was performed to investigate the impact of the microbiological quality of the used raw materials, the applied traditional processing techniques and ripening period on the quality and safety of the produced cheese. Three hundred random composite samples were collected from three factories at Fayoum Governorate, Egypt. Collected samples represent twenty-five each of: raw milk, table salt, calf rennet, microbial rennet, water, environmental air, whey, fresh cheese, ripened cheese & swabs from: worker hands; cheese molds and utensils; tanks. All samples were examined microbiologically for Standard Plate Count (SPC), coliforms count, Staphylococcus aureus (S. aureus) count, total yeast & mould count, presence of E. coli, Salmonellae and Listeria monocytogenes (L. monocytogenes). The mean value of SPC, coliforms, S. aureus and total yeast & mould counts ranged from (79×102 CFU/m3 for air to 13×108 CFU/g for fresh cheese), (7×102 MPN/ cm2 for tank swabs to 80×106 MPN/ml for raw milk), (9×102 CFU/g for salt to 69×106 CFU/g for fresh cheese) and (2×102 CFU/cm2 for hand swabs to 60×104 CFU/g for fresh cheese), respectively. Whereas, E. coli, Salmonella and L. monocytogenes failed to be detected in all examined samples. There were significant differences in all determined microbiological parameters (p ≤0.05) between fresh and ripened cheese which may be attributed to different adverse conditions such as water activity, pH, salt content and temperature carried out to improve the quality of the product.


Sign in / Sign up

Export Citation Format

Share Document