scholarly journals Comparison of methods for sampling saproxylic beetles in fine wood

2007 ◽  
Vol 18 (4) ◽  
Author(s):  
Mats Jonsell ◽  
Jesper Hansson

Three methods for extracting saproxylic beetles from wood samples were compared. The aim with the samples was to collect substrate-specific data on the beetle fauna in different types of small diameter wood. The methods were: (1) sifting – peeling bark from the wood, sifting it and extracting beetles in Tullgren funnels, (2) box-rearing – storing wood in dark wooden boxes and using light to attract emerging beetles; and (3) sack-rearing – hanging the wood in white cotton sacks with a collection vial at the bottom. Rearing sacks gave the species richest samples. Box-rearing gave similar results, but some small beetle species, especially Staphylinidae, were less frequent. Sifting was not useful for species occurring as larvae in the wood, but gave results similar to the two rearing methods for most species that occurred as adults, and was the most efficient method for the Staphylinidae. The two rearing methods were somewhat more labour intensive than sifting, but produced more beetles per sample. Sack-rearing was somewhat more efficient than box-rearing.

2015 ◽  
Vol 157 (B1) ◽  
Author(s):  
A Nazarov

The paper presents the review of design experience and applied research of catamaran craft, up to 30m in length, of total over 30 catamaran designs, developed by ‘Albatross Marine Design’ and launched during recent years. Architecture of catamarans is discussed; typical catamaran hull shapes are reviewed and their suitability for different applications and desired speeds are studied. Recommendations are given for hull shape particulars selection. Performance issues are studied using available theoretical methods and sea-trials data of number catamarans. Components of resistance of catamarans and methods of their prediction are reviewed. Comparison of methods is presented and samples of their applications for hull shape selection are shown. Seakeeping performance is discussed in terms of vertical accelerations. Results of full-scale measurements of vertical accelerations on number of craft are presented. Controllability discussion is based on turning track measurements for power catamarans of different configurations at different speeds. Structural design issues are reviewed with special interest in composite craft and their improvements. Perspective applications of catamaran concept for different types of craft are indicated. Presented are samples of catamaran designs for special, small commercial and pleasure catamarans.


2018 ◽  
Vol 18 (5-6) ◽  
pp. 460-482 ◽  
Author(s):  
Gunther Schauberger ◽  
Andreas Groll

Many approaches that analyse and predict results of international matches in football are based on statistical models incorporating several potentially influential covariates with respect to a national team's success, such as the bookmakers’ ratings or the FIFA ranking. Based on all matches from the four previous FIFA World Cups 2002–2014, we compare the most common regression models that are based on the teams’ covariate information with regard to their predictive performances with an alternative modelling class, the so-called random forests. Random forests can be seen as a mixture between machine learning and statistical modelling and are known for their high predictive power. Here, we consider two different types of random forests depending on the choice of response. One type of random forests predicts the precise numbers of goals, while the other type considers the three match outcomes—win, draw and loss—using special algorithms for ordinal responses. To account for the specific data structure of football matches, in particular at FIFA World Cups, the random forest methods are slightly altered compared to their standard versions and adapted to the specific needs of the application to FIFA World Cup data.


2020 ◽  
Vol 62 (11) ◽  
pp. 649-655
Author(s):  
W Sharatchandra Singh ◽  
C K Mukhopadhyay

This paper proposes multi-NDE techniques for enhanced and reliable detection of localised defects or flaws in small-diameter (19.05 mm outer diameter (OD) and 2.77 mm wall thickness (WT)) low-carbon steel tubes. Multi-NDE techniques comprising magnetic flux leakage (MFL), remote field eddy current (RFEC) and the ultrasonic internal rotary inspection system (IRIS) are used to investigate the detectability and spatial resolution for the detection of localised flaws of different types and sizes, which simulate flaws generally formed in carbon steel tubes. The studies reveal that the MFL and IRIS techniques detect 0.55 mm-deep holes and notches while the RFEC technique detects 1.11 mm-deep holes and 0.55 mm-deep notches. The IRIS technique is capable of resolving axial and circumferential holes (1 mm diameter and 1.39 mm depth) of 2 mm hole-to-hole separation, while the MFL technique can resolve axial holes of 2 mm hole-to-hole separation but not circumferential holes. The RFEC technique can detect axial holes as a single hole but is unable to detect circumferential holes, resulting in no spatial resolution for the axial and circumferential holes. Compared to the MFL and RFEC signals, IRIS readily discerns the spatial extent of the flaws with the possibility of sizing from the images. The study also reveals that the resolution capability of the IRIS technique is influenced by the speed of the turbine rotation inside the tube.


2004 ◽  
Vol 34 (1) ◽  
pp. 1-19 ◽  
Author(s):  
HE James Hammond ◽  
David W Langor ◽  
John R Spence

Saproxylic beetles associated with Populus coarse woody material were sampled from two age classes of fire-origin aspen stands in north-central Alberta, Canada. A combination of rearings from wood bolts and window traps attached to snags yielded 9571 beetles representing 257 taxa over the 3-year period (1993–1995). We investigated faunal variation across regions, stand ages (mature, 60–90 years; old, >100 years), decay classes, wood types, and years in terms of species richness, abundance, and trophic differences. Although trophic structure was similar, faunal composition differed between the two study regions. Species richness and abundance were similar across stand ages; however, many species were collected exclusively or in great majority from old stands and from snags of large diameter, which suggested that truncation of stand age structure through widespread industrial harvest could have serious consequences for saproxylic assemblages. Beetle species richness increased with the level of wood decay, whereas the total catch of beetles tended to be higher in early stages of decay. Wood borer abundance tended to be higher in snags; however, total species richness was higher in logs. Our analyses suggest that (i) many beetle species in the Canadian boreal forest depend directly upon standing and fallen large-diameter woody material from Populus trees, (ii) variation in stage of decay is critical to beetle diversity, and (iii) provision for retention of representative old stands is critical to conservation of saproxylic communities.


2018 ◽  
Vol 14 (02) ◽  
pp. 117 ◽  
Author(s):  
Radoslava Stankova Kraleva ◽  
Velin Spasov Kralev ◽  
Nina Sinyagina ◽  
Petia Koprinkova-Hristova ◽  
Nadejda Bocheva

In this paper, the results of a comparative analysis between different approaches to experimental data storage and processing are presented. Several studies related to the problem and some methods for solving it have been discussed. Different types of databases, ways of using them and the areas of their application are analyzed. For the purposes of the study, a relational database for storing and analyzing a specific data from behavioral experiments was designed. The methodology and conditions for conducting the experiments are described. Three different indicators were analyzed, respectively: memory required to store the data, time to load the data from an external file into computer memory and iteration time across all records through one cycle. The obtained results show that for storing a large number of records (in the order of tens of millions of rows), either dynamic arrays (stored on external media in binary file format), or an approach based on a local or remote database management system can be used. Regarding the data loading time, the fastest approach was the one that uses dynamic arrays. It outperforms significantly the approaches based on a local or remote database. The obtained results show that the dynamic arrays and the local data sets approaches iterated much faster across all data records than the remote database approach. The paper concludes with proposal for further developments towards using of web services.


2021 ◽  
Vol 316 ◽  
pp. 589-596
Author(s):  
Vitaliy E. Inozemtcev ◽  
Mikhail Yu. Kulikov ◽  
Dmitry G. Evseev

The influence of the effect of combining different types of processing based on the physical force acting on the surface of conductive materials and the electrochemical active action of electrolytes acting as a cutting fluid is considered. The experiments carried out and show a significant effect of these types of processing on the surface quality and the provision of the initial various physical and mechanical properties of the processed materials. The article presents various dependencies of qualitative parameters for the implementation of shaping processes using such blade processing operations as turning, threading in holes of small diameter and expanding the holes. With combined processing methods, the process of forming the finish surface is due to the combined action of the cutting tool and the anodic dissolution of the metal under the influence of an electric current in the electrolyte solution. The application of this method allows obtain higher quality parameters when machining aluminum and copper alloys, the surface formed during processing, including the preservation of such special characteristics of certain materials, such as porosity.


1964 ◽  
Vol 18 (4) ◽  
pp. 587-594 ◽  
Author(s):  
Wei Lai

The problem of flow of an inviscid, incompressible fluid inside a circular pipe, with a sphere on the axis of the pipe, has been studied by Lamb (1936) (irrotational flow), Long (1953) and Fraenkel (1956) (swirling flow). Because of the difficulty of satisfying all the boundary conditions in the problem, only approximate solutions, valid for spheres of small diameter (compared with that of the pipe) have been obtained. In this paper, it is found that by introducing a vortex sheet over a segment of the diameter of the sphere, flow patterns can be obtained by an inverse method for the case of large spheres. Four different types of flow are considered: (1) irrotational flow, (2) swirling flow with constant axial and angular velocities far upstream, without lee waves, (3) swirling flow with constant axial and angular velocities far upstream, with lee waves, and (4) rotational flow with a paraboloidal velocity distribution far upstream.


1983 ◽  
Vol 10 (2) ◽  
pp. 66-69 ◽  
Author(s):  
C. C. Green ◽  
M. K. Beute ◽  
J. C. Wynne

Abstract Three methods presently used to evaluate disease resistance in peanut (Arachis hypogaea L.) to Cylindrocladium black rot (CBR) were compared to identify the most efficient method to screen peanut lines in field tests. Forty randomly selected F2 families in the F5 generation from a cross of the CBR-resistant source NC 3033 with NC 6 and the two parents were evaluated for percent dead and diseased plants, root rot index and microsclerotia/g of root. Significant differences were detected between the parents (p = 0.05) and among segregates (familes) (p = 0.01) for percent dead and diseased plants only. Error components exceeded the mean square values for differences among segregates for the root rot index and microsclerotia/g of root resulting in no significant differences among entries for these traits and low to no correlations among traits. Percent dead and diseased plants was concluded to be the best of the three methods for screening peanut lines in the field for CBR resistance.


2018 ◽  
Vol 169 (3) ◽  
pp. 158-165 ◽  
Author(s):  
Andreas Sanchez ◽  
Yannick Chittaro ◽  
Yves Gonseth

Ecological preferences of Switzerland's emblematic saproxylic beetles Swiss forests are home to nearly 1500 species of saproxylic Coleoptera. 414 of these are considered emblematic of specific microhabitats and may be used to evaluate the biological quality of different types of forests and wooded areas in Switzerland. This article provides a summary of the ecological requirements of these beetles based on information gathered from entomological collections and the literature. 77% of emblematic saproxylic beetles live at low altitude and 64% depend on warmth and high insolation. Oak (Quercus spp.), beech (Fagus sylvatica) and pine (particularly Pinus sylvestris) are the trees most often exploited by these beetles. 46% of saproxylic Coleoptera depend on decaying wood and 12% on heavily decomposed wood. 12% develop only in cavities in wood and 13% only in wood-decomposing fungi. We propose measures to promote saproxylic Coleoptera, namely by increasing the total amount of dead wood available (namely tree trunks and large branches) throughout Switzerland to at least 20m3/ha in the Jura, on the Plateau and the southern foothills of the Alps and 25 m3/ha in the Alps and Prealps. We also recommend the conservation of old trees that provide unique treemicrohabitats for saproxylic beetles.


PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5971 ◽  
Author(s):  
Tomasz Rewicz ◽  
Radomir Jaskuła

BackgroundTiger beetles (Coleoptera: Cicindelidae) are fast running predatory insects preying on different small insects and other terrestrial arthropods. Prey is located by sight and captured after short and fast pursuit interspersed with pause-and-look behaviour. At least some tiger beetle species can recognise the size and location of prey using memory, which probably allows them to achieve greater hunting success.Material and MethodsTwo eurytopic tiger beetle species known to occur in different types of habitat were used in the study:Cicindela hybrida hybrida, a very common central European beetle found even in artificial habitats such as sandy roads or gravel pits, andCalomera littoralis nemoralis, a species widely distributed in southern European countries and occurring on sandy sea beaches, in salt marshes, as well as on sandy banks of rivers and lakes. Both species are very similar in body size. Specimens used in the study were collected in the field and later tested in the laboratory. We checked whether tiger beetles use different hunting strategies when attacking prey of different sizes and abilities to escape as well as whether the sex of the studied species makes a difference in its hunting behaviour.ResultsThe hunting strategies of both tiger beetle species consist of the following main phases: identification, pursuit (often with stops), attack, and optional release of the prey, and then the secondary attack, abandonment of the prey, or consumption of the prey. Considerable differences were noticed in hunting behaviour depending on the type of prey, its movement ability and escape potential. Caterpillars were attacked without pursuit, in the head or directly behind the head where a concentration of nerves and main muscles responsible for walking are located. Effective attacks on beetles were executed at the connection between the thorax and the abdomen.Calomera littoralisstrongly preferred slow moving prey, whileCicindela hybridapreferred in equal measure slow moving prey and medium-sized fast moving prey. The experiment on the preferred size of prey indicated small beetles and small caterpillars as favoured byCalomera littoralis, whileCicindela hybridapreferred medium-sized fast moving prey and large caterpillars.DiscussionThe hunting behaviour ofCalomera littoralisandCicindela hybridais complicated and includes a number of phases allowing to locate, capture and kill the prey. Beetles are able to discriminate between different types of prey and apply different behavioural tactics to hunt it. As the particular strategies are used to increase hunting success, and as a result allow to accumulate energy for future activity of the predator, it can be expected that such a type of hunting behaviour is characteristic also of other tiger beetle species.


Sign in / Sign up

Export Citation Format

Share Document