scholarly journals Design of an Automatic Water Pump on a Traditional Boat

SinkrOn ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 100
Author(s):  
Ihsan Ihsan ◽  
Dirja Nur Ilham ◽  
Rudi Arif Candra ◽  
Amsar Yunan ◽  
Hardisal Hardisal
Keyword(s):  
Control System ◽  
Human Intervention ◽  
Water Pump ◽  
Turn On ◽  
Fishing Boat ◽  
Working Principle ◽  
Water Drain

Draining traditional boat water efficiently is sometimes considered to be of little importance to most fishermen. Because it is considered a normal thing without realizing it can be detrimental, both in terms of time and work. One of the things that often makes the use of draining water less efficient is that the draining of boat water is still done manually with human intervention. So that fishermen are preoccupied with removing puddles of boats and hindering their work. Based on the above problems, this study aims to make a traditional boat water drain control system automatically. This tool functions to control the volume of water in the boat as well as turn on and turn off the water pump engine automatically. This tool is able to remove puddles that enter the fishing boat automatically. The working principle of this tool, if the water hits the sensor ≥ 5 cm, the pump and buzzer will start and if the water doesn't hit the sensor, the pump and buzzer will automatically shut down.

scholarly journals Design of Portable Conditioning Chamber with Peltier Element for Transfusion Blood Temperature

2020 ◽  
Vol 9 (3) ◽  
pp. 812-816
Keyword(s):  
Control System ◽  
Temperature Sensor ◽  
Conditioning Chamber ◽  
Peltier Element ◽  
Temperature Range ◽  
Turn On ◽  
Blood Temperature ◽  
Peltier Cooler ◽  
Working Principle ◽  
Save Energy

A research has been conducted on the design of conditioning chambers with Peltier elements aimed at controlling transfusion blood temperature and analyzing the control system that has been made. The working principle of the control system that is made is the temperature sensor will read the temperature in the chamber, if the temperature reads above 10 °C, the relay will light up and electricity will flow so that the Peltier cooler will work, if the temperature has reached 10 °C, then the relay will off and the electricity will stop to save energy. The relay will turn on again if the temperature rises above 10 °C. The results obtained from this experiment is the Peltier element can cool down for 30 minutes with variations in load 0 mL, 350 mL, 700 mL, 1050 mL, and 1400 mL in the temperature range of 2 °C to 10 °C.

scholarly journals Temperature and humidity control system for broiler chicken coops

2021 ◽  
Vol 22 (3) ◽  
pp. 1327
Author(s):  
Ramadiani Ramadiani ◽  
Eko Wiji Setio Budianto ◽  
Dharma Widada ◽  
Masayu Widiastuti ◽  
Muhammad Labib Jundillah
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Automatic Control System ◽  
Broiler Chicken ◽  
Research Problem ◽  
Water Pump ◽  
Broiler Breeders ◽  
Humidity Control ◽  
Turn On ◽  
Temperature And Humidity

Stress in chickens due to rising cage temperatures is a problem that is often faced by breeders, especially broiler breeders. Research with the title "temperature and humidity control system for broiler chicken coops", has formulated the research problem as follows; how to make an automatic control system to maintain the temperature and humidity of the ras broiler chicken coop to keep it stable using Arduino Uno ATMega328. In this tool it has been set, if the temperature is ≥ 30º C then the water pump will turn on, and the water pump will turn off when the temperature is ≤ 29º C. Based on the results in this study, the temperature and humidity control system succeeded in helping farmers keep the temperature of the ras broiler chicken coop remained stable, so that farmers' production can be increased. In addition, this system also helps efficiency in terms of time and labor, because this system works automatically.

Research and Design of Intelligent Lighting Control System Based on Industrial Wireless Technology

2011 ◽  
Vol 467-469 ◽  
pp. 620-624 ◽  
Author(s):  
Jun Wang ◽  
Wei Ru Chen
Keyword(s):  
Control System ◽  
The Internet ◽  
Control Technology ◽  
Wireless Technology ◽  
Lighting Control ◽  
Turn On ◽  
Point Control ◽  
The Cost ◽  
Research And Design ◽  
The Internet Of Things

The intelligent lighting control system is one of typical applications of the Internet of things. The method of intelligent lighting control system based on industrial wireless technology is proposed in the paper. It used proposed three-point-control technology, and adjusting the brightness of lamps, turn on/off the lamps and a part of fault detection can be realized. At the same time, it can greatly reduce the cost of system. It will be useful to engineer and researchers.

Design of Hydraulic Descaling Computer Control System

2014 ◽  
Vol 608-609 ◽  
pp. 19-22
Author(s):  
Ping Xu ◽  
Jian Gang Yi
Keyword(s):  
Control System ◽  
Stability Problem ◽  
Computer Control ◽  
Control Methods ◽  
Computer Control System ◽  
Control Software ◽  
Pressure Water ◽  
Working Principle ◽  
The Stability

Hydraulic descaling system is the key device to ensure the surface quality of billet. However, traditional control methods lead to the stability problem in hydraulic descaling system. To solve the problem, the construction of the hydraulic descaling computer control system is studied, the working principle of the system is analyzed, and the high pressure water bench of hydraulic descaling is designed. Based on it, the corresponding computer control software is developed. The application shows that the designed system is stable in practice, which is helpful for enterprise production.

scholarly journals Rancang Bangun Pengaman Panel Distribusi Tenaga Listrik Di Lippo Plaza Sidoarjo Dari Kebakaran Berbasis Arduino Nano

2017 ◽  
Vol 1 (2) ◽  
pp. 31
Author(s):  
Achmad Solih ◽  
Jamaaluddin Jamaaluddin
Keyword(s):  
Control System ◽  
Power Factor ◽  
Power Distribution ◽  
Low Voltage ◽  
Capacitor Bank ◽  
Warning Sign ◽  
Inductive Load ◽  
Three Phase ◽  
Working Principle ◽  
Power Distribution Control

Panel system power distribution at Lippo Plaza Mall Sidoarjo consists of several parts, namely from Cubicle 20 KV, 20 KV step-down transformer for 380 V, then the supply to LVMDP (Low Voltage Main Distribution Panel) The new panel to the user. Before delivery to users to note that the power factor is corrected using a capacitor bank. Less good a power factor is turned into inductive load on the capacitor bank so that temperatures high  because of high load resulting capacitor bank erupt. To overcome in this study proposes a safety panel automation power distribution control system using a microcontroller. Control system microcontrollers for safety panel power distribution consists of: Microcontroller (Arduino Nano), Light sensor (LDR), temperature sensor (LM35DZ), LCD 16x2 I2C, Actuators (fan, buzzer, relay switch breaker network three phase), switch ( relay 5 VDC), ADC as Input data. The working principle of this microcontroller LM35DZ if the sensor detects a high temperature fan will flash, if the LDR sensor detects sparks then the buzzer will sound as a warning sign of the dangers and disconnected the electricity network. From the design of a safety tool for power distribution panels due to high temperatures or sparks as well as the expected rate of fire outbreaks can be prevented.

scholarly journals Remote Control Switching System Based on Wireless Technology

2020 ◽  
Vol 3 (2) ◽  
pp. 52
Author(s):  
Luh Kadek Pracanthi Dyah Sekartaji ◽  
Nyoman Pramaita ◽  
Nyoman Gunantara
Keyword(s):  
Control System ◽  
Remote Control ◽  
The Elderly ◽  
Design System ◽  
Switching System ◽  
Turn On ◽  
Remote Control System ◽  
Transmission Distance ◽  
Receiver System ◽  
To Receive

Remote control switching system is used to control the switching of the electrical and electronic appliances from a distance. This remote serves to facilitate the use of the switching of electrical, and electronic appliances for people with disabilities, and the elderly. This paper develops a remote control system using radio frequency technology utilizing the principle of wireless system. The remote control system is constructed by RF433 module as the transmitter, and receiver, IC HT12E module as the encoder, and IC HT12D module as the decoder. To achieve the aim of this research: a transmitter system is designed to transmit a signal when the keypad is pressed; a receiver system is designed to receive the signal from the transmitter system, then the system will turn on and turn off the loads. Based on experimental results, this design system is capable to turn on and turn off the loads with a transmission distance up to 18 meters, without obstruction, and 15 meters with obstruction.  

scholarly journals Design of Tracked Model Vehicle Measurement and Control System Based on VeriStand and Simulink

2018 ◽  
Vol 175 ◽  
pp. 03047
Author(s):  
Hao Chang ◽  
Dafang Wang ◽  
Hui Wei ◽  
Qi Zhang ◽  
GuangLi Dong
Keyword(s):  
Control System ◽  
Data Processing ◽  
Vehicle Control ◽  
Logic Model ◽  
Motor Speed ◽  
Control Logic ◽  
Measurement And Control System ◽  
Working Principle ◽  
And Control ◽  
Measurement And Control

This paper presents the composition and working principle of the hardware and software of the measurement and control system based on VeriStand and Simulink for a tracked model vehicle. The hardware of the system is composed of a CompactRIO controller and acquisition cards, torque/speed sensors and a gyroscope. The vehicle control logic model and data processing model are built in Matlab/Simulink. VeriStand is adopted to manage models and interact with people. The system can control motor speed on both sides of the vehicle and collect data such as sprocket torque and speed, vehicle attitude on real-time. At last, we test and verify the system can work successfully.

The Multi-Scenario Semiconductor Lighting Control of Driver Refactoring

2015 ◽  
Vol 743 ◽  
pp. 209-213
Author(s):  
Jun Shi Li ◽  
Feng Xiong ◽  
Guo Qing Qu
Keyword(s):  
Control System ◽  
Remote Control ◽  
Control Method ◽  
Led Driver ◽  
Lighting Control ◽  
Zone Control ◽  
Driver Circuit ◽  
Working Principle ◽  
Hardware Circuit ◽  
The Internet Of Things

In view of the inefficiency and the poor flexibility of the recent intelligent lighting control system, this paper proposes a new control method starting from sensor, controller and LED driver circuit, meanwhile connecting with the Internet of things technologies. The most striking feature of this control is that it is refactored in the aspect of the whole system, which can reach the purposes of scene control, timing control, multi-zone control and remote control, etc. This paper also elaborates the hardware circuit design and the working principle of the control system and the method to realize the remote control. The system can operate simply, control efficiently, transmit reliably, manage easily.

Sign in / Sign up

Export Citation Format

Share Document