scholarly journals Surface analysis of latex and silicone pacifier nipples after exposure to acidic artificial saliva: a pilot study

2021 ◽  
Vol 10 (16) ◽  
pp. e111101623074
Author(s):  
Thiago Isidro Vieira ◽  
Kira Maria de Sousa Andrade ◽  
Thayana Maria Navarro Ribeiro de Lima ◽  
Mariana Leonel Martins ◽  
Simone Alves de Sousa ◽  
...  
Keyword(s):  
Pilot Study ◽  
Direct Contact ◽  
Artificial Saliva ◽  
Three Dimensional ◽  
Optical Profilometry ◽  
Roughness Parameters ◽  
Before And After ◽  
Paired T Test ◽  
Qualitative Changes ◽  
Surface Changes

Objective: To measure surface changes of pacifier nipples after immersion in acidic artificial saliva. Methods: Two types of pacifier nipples (latex and silicone) were selected. Five copies of each type were used. The protocol consisted of immersion in acidic artificial saliva (pH = 5.97) for 16 days. The nipples of the pacifier remained in direct contact with saliva in an individualized, opaque and closed container in a bacteriological incubator at 37ºC. The samples were examined before and after exposure to saliva through qualitative (based on images obtained in a 100 mm macro lens and three-dimensional images with 10% amplification obtained in the profilometry) and quantitative (roughness data obtained in non-contact 3D optical profilometry). Data were obtained in duplicate and analyzed using descriptive and inferential statistics. The findings were tested for normality (Shapiro-Wilk). Paired t-test or Wilcoxon was used to compare before and after roughness data. Results: In the image analysis, it was observed that only the surface of the latex pacifier's nipples showed an irregular appearance after exposure to saliva. In the quantitative evaluation, no differences were found between the roughness values before and after (p>0.05). Conclusion: This pilot study demonstrated qualitative changes in the surface of latex pacifiers. However, it was not able to demonstrate statistically significant differences for the roughness parameters before and after exposure to acidic artificial saliva in the nipples of latex and silicone pacifiers.

scholarly journals Effect of Toothbrushing-mouthrinse-cycling on Surface Roughness and Topography of Nanofilled, Microfilled, and Microhybrid Resin Composites

2014 ◽  
Vol 39 (5) ◽  
pp. 521-529 ◽  
Author(s):  
EM da Silva ◽  
CUF de Sá Rodrigues ◽  
DA Dias ◽  
S da Silva ◽  
CM Amaral ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Resin Composite ◽  
Artificial Saliva ◽  
Filler Particle ◽  
Three Dimensional ◽  
Resin Composites ◽  
Topographic Analysis ◽  
Before And After ◽  
Multifactor Analysis ◽  
Post Hoc

SUMMARY The purpose of this study was to evaluate the influence of toothbrushing-mouthrinse-cycling (TMC) on the surface roughness and topography of three resin composites with different filler particle systems (Z350, nanofilled [Nf]; Durafill, microfilled [Mf], and Empress Direct, microhybrid [Mh]). Twenty specimens of each resin composite (8.0 mm diameter and 2 mm height) were randomly divided into four groups (n=5) according to the mouthrinses: alcohol-free (Plax – P) and alcohol-containing (Listerine – L and Plax Fresh Mint – PM) and artificial saliva (control – AS). The specimens were submitted to TMC for nine weeks. A surface roughness tester and a three-dimensional profilometer were used to measure the roughness (Ra) and the topography (Sa) before and after TMC. The data were analyzed by multifactor analysis of variance and Tukey post hoc test (α=0.05). In all media, Mh presented greater roughness than Mf (p<0.05). The highest value of roughness was presented by Mh immersed in L (p<0.05). The lowest values of roughness were presented by Mf (p<0.05). The three resin composites presented the highest roughness after immersion in mouthrinses containing alcohol (PM and L) (p<0.05). For the three resin composites, the increase in roughness was noticeable after the fifth week. Topographic analysis showed that the smoothest surfaces were present after immersion in AS.

scholarly journals Effect of post–orthognathic surgery condylar axis changes on condylar morphology as determined by 3-dimensional surface reconstruction

2013 ◽  
Vol 84 (2) ◽  
pp. 316-321 ◽  
Author(s):  
Soo-Bum An ◽  
Soo-Byung Park ◽  
Yong-Il Kim ◽  
Woo-Sung Son
Keyword(s):  
Orthognathic Surgery ◽  
Pearson Correlation ◽  
Three Dimensional ◽  
Class Iii ◽  
Absolute Deviation ◽  
Skeletal Class ◽  
Before And After ◽  
Group 2 ◽  
Jaw Surgery ◽  
Surface Changes

ABSTRACT Objective: To evaluate the effect of postoperative condylar axis changes on mandibular condylar remodeling by comparing the condylar head in three-dimensional (3D) surface reconstructions before and after surgery in skeletal Class III deformities (one-jaw [mandibular setback] or two-jaw surgery), and also to determine the relationship between condylar inward rotation and condylar surface remodeling after orthognathic surgery. Materials and Methods: A retrospective analysis was conducted of 30 patients with skeletal Class III deformities who had received orthognathic surgery. Group 1 underwent one-jaw surgery (10 men, five women, age 22.4 ± 3.3 years), and group 2 underwent two-jaw surgery (10 men, five women, age 22.3 ± 2.2 years). Sixty condyles were reconstructed and superimposed pre- and postoperatively to compare the changes of condylar surfaces. The relation between the condylar axis change and the surface change using the Pearson correlation were investigated from the 3D image software. Results: Condylar surface changes before and after the surgery were significant. The postoperative inward rotation of the condyles was correlated with the average absolute deviation of the condyles, regardless of the surgery type (one- or 2-jaw surgery; r  =  .70, P < .05). Conclusion: After orthognathic surgery, condylar surface changes occurred, and condylar inward rotation was closely related to changes of condylar surface.

scholarly journals Effects of Composites Containing Bioactive Glasses on Demineralized Dentin

2017 ◽  
Vol 96 (9) ◽  
pp. 999-1005 ◽  
Author(s):  
A. Tezvergil-Mutluay ◽  
R. Seseogullari-Dirihan ◽  
V.P. Feitosa ◽  
G. Cama ◽  
D.S. Brauer ◽  
...  
Keyword(s):  
Bioactive Glass ◽  
Direct Contact ◽  
Artificial Saliva ◽  
Dry Mass ◽  
Sem Analysis ◽  
Dental Composites ◽  
Bioactive Glasses ◽  
Beneficial Effects ◽  
Before And After ◽  
Demineralized Dentin

The aim of this study was to evaluate the degradation of completely demineralized dentin specimens in contact with a filler-free or 2 ion-releasing resins containing micrometer-sized particles of Bioglass 45S5 (BAG) or fluoride-containing phosphate-rich bioactive glass (BAG-F). Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were also used to evaluate the remineralization induced by the experimental ion-releasing resin-based materials. Dentin beams were totally demineralized in H3PO4 (10%) and placed in direct contact with a filler-free (RESIN) or 2 experimental ion-releasing resins (BAG or BAG-F) and immersed in artificial saliva (AS) up to 30 d. Further specimens were also processed and submitted to FTIR and SEM analysis to evaluate the remineralization induced by such ion-releasing resins before and after AS immersion. BAG and BAG-F alkalinized the incubation media. A significant decrease of the dry mass was observed between the specimens of all groups stored for 3 and 30 d in AS. However, the fluoride-containing phosphate-rich bioactive glass incorporated into a resin-based material (BAG-F) showed greater ability in reducing the solubilization of C-terminal cross-linked telopeptide (ICTP) and C-terminal telopeptide (CTX) after prolonged AS storage. Moreover, after 30 d of AS storage, BAG-F showed the greatest remineralizing effect on the stiffness of the completely demineralized dentin matrices. In conclusion, fluoride-containing phosphate-rich bioactive glass incorporated as micrometer-sized filler in dental composites may offer greater beneficial effects than Bioglass 45S5 in reducing the enzyme-mediated degradation and remineralization of demineralized dentin.

Surface profile of different heat-treated nickel-titanium files before and after root canal preparation

2021 ◽  
Vol 32 (6) ◽  
pp. 8-15
Author(s):  
Iandara de Lima Scardini ◽  
Denise Maria Zezell ◽  
Juliana Lisboa Couto Marques ◽  
Laila Gonzales Freire ◽  
Marcelo dos Santos
Keyword(s):  
Three Dimensional ◽  
Surface Profile ◽  
Surface Wear ◽  
Significance Level ◽  
Root Canals ◽  
Heat Treated ◽  
Before And After ◽  
Surface Irregularities ◽  
Multiple Uses ◽  
Surface Changes

Abstract The aim of this study was to evaluate surface wear, presence of microcracks and surface irregularities of WaveOne (WO) and WaveOne Gold (WOG) instruments before and after multiple uses. Eight Primary instruments of the WO and WOG systems were evaluated, each one was used to prepare six mesial canals of extracted human mandibular molars. The surface of the instruments was evaluated before use (T0), after instrumentation of three (T1) and six (T2) root canals. Surface wear was analyzed using a three-dimensional optical profiler and the presence of microcracks and surface irregularities were evaluated using a tabletop scanning electron microscopy. The Friedman test was used to assess surface wear and Kruskal-Wallis test to evaluate the presence of microcracks and surface irregularities, with a 5% significance level. There was a significant increase in wear in both groups at T2, compared to T0 (p=0.0003). The surface wear after instrumentation of six canals (T2-T0) was statistically greater in the WOG group, than in the WO group (p=0.02), where the presence of microcracks was significantly greater and increased after multiple uses (p<0.05). The presence of surface irregularities in the cutting blade before and after use was statistically greater in the WOG group than WO group (p<0.05). Wear of the cutting blade, microcracks and surface irregularities were observed on the surface topography of all the instruments after multiple uses. These surface changes may affect the cutting efficiency of WOG files and increase the risk of fracture of WO files.

Facial movement before and after masseteric-facial nerves anastomosis: A three-dimensional optoelectronic pilot study

2012 ◽  
Vol 40 (5) ◽  
pp. 473-479 ◽  
Author(s):  
Chiarella Sforza ◽  
Alice Frigerio ◽  
Andrea Mapelli ◽  
Filippo Mandelli ◽  
Fernanda V. Sidequersky ◽  
...  
Keyword(s):  
Pilot Study ◽  
Three Dimensional ◽  
Facial Movement ◽  
Before And After ◽  
Facial Nerves

Perbedaan Pengetahuan Siswa Tentang Penyakit Hepatitis A Sebelum Dan Sesudah Penyuluhan Di MTsN 02 Bondowoso Tahun 2015

2017 ◽  
Vol 4 (2) ◽  
pp. 14
Author(s):  
Putri Megasari
Keyword(s):  
Hepatitis A ◽  
Hepatitis Virus ◽  
Sampling Technique ◽  
Mean Value ◽  
Test Design ◽  
The World ◽  
Before And After ◽  
Post Test ◽  
The Mean ◽  
Paired T Test

Hepatitis has become a health problem in the world. The hepatitis virus infected many people. According to the teacher of MTsN 02 Bondowoso more than 20 students have hepatitis A viral infection. The purpose of this research was to know the differences of students' knowledge about hepatitis A before and after counseling in MTsN 02 Bondowoso 2015. This study used pre-experimental (pre-post test design). This study used stratified random sampling technique, 127 students from 270 sample involved this research,and 143 students was excluded. We used questionnaires to collect data. The results showed that the mean value of the students 'knowledge about hepatitis A before counseling in MTsN 02 Bondowoso 2015 was 83.96 with the lowest value of 37.5 and the highest value was 100. The mean value of the students' knowledge about hepatitis A after counseling in MTsN 02 Bondowoso 2015 was 93.21 with the lowest value waf 62.5 and the highest value was 100. Paired t test showed that t (-9.07) > t table (1.98), the null hypothesis (H0) was rejected. There was a difference between students' knowledge about hepatitis A before and after counseling in MTsN 02 Bondowoso 2015. This study showed that routine counseling by healthcare provider was important to prevent hepatitis A infection.; Keywords: counseling, knowledge of students, hepatitis

A pilot study on the effect of ulipristal acetate on myoma angiogenesis, measured by 2D ultrasound and VEGF serum levels

2020 ◽  
pp. 19-29
Author(s):  
Patricia Diaz Ortega ◽  
Manuel García Manero
Keyword(s):  
Pilot Study ◽  
Power Doppler ◽  
Uterine Fibroids ◽  
Premenopausal Women ◽  
Serum Levels ◽  
Ulipristal Acetate ◽  
Before And After ◽  
Angiogenesis Process ◽  
2D Ultrasound ◽  
Average Size

Introduction: Symptomatic uterine fibroids can cause symptoms that can be disabling. There are many treatments, including ulipristal acetate, whose role in reducing symptoms and decreasing the size of the fibroid is well known. With this preliminary study, we also try to evaluate the correlation between myoma vascularization measured by ultrasound (Power Doppler 2D) and serum VEGF levels, before and after treatment with ulipristal acetate; in patients diagnosed with symptomatic uterine fibroids. Materials and Methods: A preliminary, prospective observational pilot study was designed. Twenty-four premenopausal women, diagnosed with symptomatic uterine fibroids, were included and all of them completed the study. Four cycles of ulipristal acetate were administered according to the dose and indications specified in the data sheet. In order to assess the influence of this treatment on the angiogenesis process of the fibroids, measurements of VEGF serum levels were made and their vascularization was assessed by means of 2D power doppler ultrasound; at the beginning and the end of treatment. In addition, several determinations of the same parameters were made throughout the successive visits. Endpoints were defined as the decrease in VEGF levels from previous levels, the decrease in myoma vascularization on ultrasound, and the reduction in myoma size. Result: 24 patients who met the inclusion criteria were enrolled (n=24). The average size of myomas was reduced from 45,08 ? 24,02mm to 29?16,96mm after treatment. The average VEGF serum level significantly decreased after the first treatment cycle (from 147,17 ? 153,51 pg/ml to 102,04 ? 186,08pg/ml). Vascularization of myomas after treatment with ulipristal acetate was analyzed, and a significantly decrease was achieved in 83,3% of cases. Conclusion: There is a correlation between myoma vascularization and treatment with Ulipristal acetate. SPRMs may provide effective treatment for women with symptomatic fibroids by two ways: supports selective progesterone receptor modulators and reduced angiogenesis. Keywords: Angiogenesis; Ulipristal Acetate; Uterine fibroids; VEGF

The Degree of Subjective Complaints of Students Practice in Mechanical Technology Laboratories

2018 ◽  
Vol 4 (1) ◽  
pp. 22
Author(s):  
I Ketut Widana
Keyword(s):  
Engineering Students ◽  
Standing Position ◽  
Statistical Test ◽  
Rank Test ◽  
Cross Sectional ◽  
Signed Rank ◽  
Before And After ◽  
Signed Rank Test ◽  
The Difference ◽  
Paired T Test

The working practice of the engineering students is part of the learning process that is irreducible and indispensable. The composition of  lecturing between theoretical and practical one is 40% to 60%. With this condition, the students spend more time at the laboratory. Generally, the students perform in the laboratory work by standing position. The design of research is observational cross-sectional. The method applied is observation, interview and measuring. The subjects of research are practicing students amounting to 21 students. Referring to the analysis of statistical test or Wilcoxon signed ranks test, the difference of effect of work position is significant, namely p < 0.05 towards musculoskeletal disorders (MSDs) before and after working. The quantity of the average complaint after working is score 44.62 ± 9.47. The result of Wilcoxon signed rank test shows that there is significant different effects of standing work position, namely p < 0.05 towards fatigue generally before and after working. The degree of the working pulse is on the average of 110.78  ± 17.80 bpm (beats per minutes) which can be categorized into the medium workload. Using paired t-test, the result is p < 0.05.

scholarly journals THU0642-HPR EVOLUTION OF THE PERCEPTIONS OF RA PATIENTS AFTER EDUCATION PATIENT SESSION TEACHING METHOTREXATE SELF-INJECTION A PROSPECTIVE PILOT STUDY

2020 ◽  
Vol 79 (Suppl 1) ◽  
pp. 566.1-566
Author(s):  
S. Afilal ◽  
H. Rkain ◽  
B. Berchane ◽  
J. Moulay Berkchi ◽  
S. Fellous ◽  
...  
Keyword(s):  
Pilot Study ◽  
Patient Education ◽  
Median Duration ◽  
Large Scale ◽  
Education Session ◽  
Prospective Pilot Study ◽  
Mean Delay ◽  
Lack Of Information ◽  
Level Of Satisfaction ◽  
Before And After

Background:Methotrexate is a gold standard for treatment of RA. In our context, RA patients prefer to be injected by paramedics rather than self-injecting. This can be explained by patients’ bad perceptions of self-injection or lack of information. Appropriate self-injection education can therefore be an important element in overcoming these obstacles and improving disease self-management.Objectives:Compare the RA patients’ perceptions on methotrexate self-injection before and after a patient education session.Methods:Prospective pilot study that included 27 consecutive patients (81.5% female, mean age 44.4 years, illiteracy rate 40.7%) with RA (median duration of progression of 4 years, mean delay in referral for specialist of 6 months, median duration of methotrexate use of 1 year). The patients benefited from an individual patient education session to learn how to self-inject with methotrexate subcutaneously. The patient education session was supervised by a nurse and a rheumatologist with a control a week later. Perceptions of the reluctance to self-inject and the difficulties encountered by patients were assessed before the patient education session, after the 1st and 2nd self-injection of methotrexate using a 10 mm visual analog scale. Patients also reported their level of satisfaction (10 mm VAS) after the 1st and 2nd self-injection.Results:The mean duration of patient education session is 13 min.Table I compares the evolution of the degrees of reluctance to self-injection, the difficulties encountered, and the satisfaction experienced by the patients.Table 1.Evolution of RA patients’ perceptions on the methotrexate self-injection. (N = 27)BeforeAfter the 1stself-injectionAfter the 2end self-injectionpVAS reluctance (0-10mm)6,5 ± 3,62,2 ± 2,91,0 ± 2,3<0,0001VAS difficulty (0-10mm)7,5 ± 2,62,5 ± 2,71,0 ± 1,9<0,0001VAS satisfaction (0-10mm)-8,9 ± 1,89,5 ± 1,50,002Conclusion:This study suggests the effectiveness of a methotrexate self-injection patient education session in RA patients. It also highlights the value of patient education in rheumatologic care. A large-scale study is necessary to better interpret and complete these preliminary results from this pilot study.Disclosure of Interests:None declared

Sign in / Sign up

Export Citation Format

Share Document