scholarly journals Changes in academic performance in the online, integrated system-based curriculum implemented due to the COVID-19 pandemic in a medical school in Korea

2021 ◽  
Vol 18 ◽  
pp. 24
Author(s):  
Do-Hwan Kim ◽  
Hyo jeong Lee ◽  
Yanyan Lin ◽  
Ye Ji Kang
Keyword(s):  
Academic Performance ◽  
Test Scores ◽  
Academic Development ◽  
Low Achievers ◽  
Integrated System ◽  
Online Classes ◽  
Test Results ◽  
High Achiever ◽  
Percent Correct ◽  
Required Courses

Purpose: This study aims to examine how students' academic performance changed, based on the test results of 16 integrated courses conducted in 3 semesters at Hanyang University College of Medicine that underwent a transition to online learning after COVID-19 in Korea. Methods: For the 16 required courses that included an integrated system-based curriculum that runs for t3 semesters, the major examination's raw scores were collected for each student. Percent-correct scores were used in the subsequent analysis. We used a t-test to compare grades between 2019 and 2020, and Cohen's D was calculated as a measure of effect size. The correlation of scores between courses was calculated using Pearson’s correlation coefficient.Results: There was a significant decrease in scores in 2020 for 10 courses (62.5%). While most of the integrated system-based curriculum test scores showed strong correlation, with a coefficient of 0.6 or higher in both 2019 and 2020, the correlation coefficient was generally higher in 2020. When students were divided into low, middle, and high achiever groups, low achievers consistently showed declining test scores in all three semesters. Conclusion: Our findings suggest that the transition to online classes due to COVID-19 has led to an overall decline in academic performance. This overall decline, which may occur when the curriculum is centered on recorded lectures, needs to be addressed. Further, medical schools need to consider establishing a support system for the academic development of low achievers.

scholarly journals STUDENTS’ COGNITIVE PROCESSES IN SOLVING PROBLEM RELATED TO THE CONCEPT OF AREA CONSERVATION

2019 ◽  
Vol 10 (1) ◽  
pp. 21-36 ◽  
Author(s):  
Rooselyna Ekawati ◽  
Ahmad Wachidul Kohar ◽  
Elly Matul Imah ◽  
Siti Maghfirotun Amin ◽  
Shofan Fiangga
Keyword(s):  
Problem Solving ◽  
Cognitive Processes ◽  
Cognitive Process ◽  
Low Achievers ◽  
High Achievers ◽  
Seventh Graders ◽  
Test Results ◽  
Area Formula ◽  
High Achiever ◽  
Cyclic Processes

This study aimed to determine the cognitive process employed in problem-solving related to the concept of area conservation for seventh graders. Two students with different mathematical ability were chosen to be the subjects of this research. Each of them was the representative of high achievers and low achievers based on a set of area conservation test. Results indicate that both samples performed more cyclic processes on formulating solution planning, regulating solution part and detecting and correcting error during the problem-solving. However, it was found that the high achiever student performed some processes than those of low achiever. Also, while the high achiever student did not predict any outcomes of his formulated strategies, the low achiever did not carry out the thought process after detecting errors of the initial solution gained. About the concept of area conservation, the finding also reveals that within the samples’ cognitive processes, the use of area formula come first before students decided to look for another strategy such as doing ‘cut-rotate-paste’ for the curved planes, which do not have any direct formula. The possible causes of the results were discussed to derive some recommendation for future studies.

An integrated system for predicting students’ academic performance in smart universities

2020 ◽  
Author(s):  
Konstantinos Chytas ◽  
Anastasios Tsolakidis ◽  
Nikitas N. Karanikolas ◽  
Christos Skourlas
Keyword(s):  
Academic Performance ◽  
Integrated System

Mathematics Grade as Correlate to Performance in the National Achievement Test

2020 ◽  
Vol 8 (1) ◽  
pp. 31-41
Author(s):  
Daryl T. Paredes ◽  
Ronalyn G. Albopera ◽  
Gladys T. Balog ◽  
Vincent A. Buladas ◽  
Mary Grace D. Hoyle ◽  
...  
Keyword(s):  
Academic Performance ◽  
Significant Degree ◽  
Achievement Test ◽  
Department Of Education ◽  
Test Results ◽  
Achievement Level ◽  
School Year ◽  
Documentary Analysis ◽  
Student’S Performance ◽  
The Relationship

Tests in schools can be informative. However, the Department of Education administered a set of examinations like the National Achievement Test which is designed to determine the learner's achievement level, strengths, and weaknesses in five curricular subject areas at the end of the school year. The study intended to look into the relationship between academic performance in Mathematics and NAT results. There has been a purposive universal sampling design. It is purposive because the research is only studying the academic performance in Mathematics, and universal because the subjects of the study are all the grade six pupils of Victoriano D. Tirol Advanced Learning Center for four consecutive school years. Documentary analysis was used as to the data of existing records on the academic performance and National Achievement Test results in Mathematics. The association between academic achievement and NAT outcomes in Mathematics was investigated using correlation analysis and one-way analysis of variance (ANOVA). The analyses revealed that there is a significant correlation between the pupil's academic performance and NAT results. Also, there is a significant degree of variance in the student's performance as to National Achievement Test Results in four consecutive school years.

Early Detection of Poor Academic Performers Using Machine Learning Predictive Modeling

2021 ◽  
Vol 13 (3) ◽  
pp. 56-69
Author(s):  
Kaviyarasi Ramanathan ◽  
Balasubramanian Thangavel
Keyword(s):  
Academic Performance ◽  
Predictive Modeling ◽  
Academic Development ◽  
Attribute Selection ◽  
Educational Institutions ◽  
Key Factors ◽  
Attainment Gap ◽  
The Common ◽  
Low Performance ◽  
Academic Scores

The student's academic development, retention, and attainment gap are considered as the common key factors that influence the institutional academic performance. In this regard, educational institutions are focusing to reduce the attainment gap between good, average, and poor performing students. Two different datasets are taken for this study. Students' data is collected through questionnaire, and Dataset 1 (D1) is created. The second dataset (D2) is taken from the repository. Both the datasets have been preprocessed followed by attribute selection and predictive modeling. In this study, predictive models have been built, and the learners are classified as high, average, and low performers based on their academic scores as well as on their demographic characters. The three classifier models are applied on the datasets. Based on the evaluation measures, the best classifier is identified. This early identification of low performance students will help the educators as well as the learners to put a special care to enhance the learning process as well as to improve the academic performance.

scholarly journals Testing of the Possibilities of Using IMUs with Different Types of Movements

2014 ◽  
Vol 12 ◽  
pp. 61-66 ◽  
Author(s):  
Pavol Kajánek
Keyword(s):  
Inertial Navigation System ◽  
Low Cost ◽  
Indoor Navigation ◽  
Integrated System ◽  
Test Results ◽  
Inertial Measurement Units ◽  
Inertial Measurement ◽  
Improve Accuracy ◽  
Different Types ◽  
Measurement Units

Inertial navigation system (INS) is a self-contained navigation technique. Its main purpose is to determinate the position and the trajectory of the object´s movement in space. This technique is well represented not only as a supplementary method (GPS/INS integrated system) but as an autonomous system for navigation of vehicles and pedestrians, also. The aim of this paper is to design a test for low-cost inertial measurement units. The test results give us information about accuracy, which determine the possible use in indoor navigation or other applications. There are described some methods for processing the data obtained by inertial measurement units, which remove noise and improve accuracy of position and orientation.

scholarly journals Pelatihan Upaya Kesehatan Kerja Bagi Masyarakat Cipayung Kota Depok

2020 ◽  
Vol 4 (4) ◽  
pp. 605-610
Author(s):  
Azizah Musliha Fitri ◽  
Fajaria Nurcandra ◽  
Terry Yuliana Rahadian Pristya
Keyword(s):  
Test Scores ◽  
Residential Location ◽  
Wilcoxon Test ◽  
P Value ◽  
Test Results ◽  
Average Value ◽  
Post Test ◽  
Level Of Knowledge ◽  
Initial Survey ◽  
The Village

An initial survey that had been done  found that the location of the settlement where residents of cipayung lived was very close to the location of the Cipayung Landfill. The unhealthy environment tended to cause disease and any other health problems, so that efforts needed to be made to overcome this, one effort that could be done is training on health . This counseling activity was attended by 21 residents living in the village of West Bulak which is the closest residential location to the Cipayung landfill site. Wilcoxon test results on the pre-test and post-test scores of participants showed a P- value of 0.001 which means that there were differences in the level of knowledge of the participants after attending counseling. The average value of pre-test and post-test had a difference of 34.5 shows that counseling that has been carried out is able to increase knowledge.

scholarly journals IoT system terpadu untuk pengelolaan sarang lebah

JURNAL ELTEK ◽  
2021 ◽  
Vol 19 (1) ◽  
pp. 9
Author(s):  
Vivien Arief Wardhany ◽  
Vivien Arief Wardhany ◽  
Alfin Hidayat
Keyword(s):  
Honey Bees ◽  
Nutritional Value ◽  
Social Insect ◽  
Human Life ◽  
Web Server ◽  
Load Cell ◽  
Integrated System ◽  
Graphical Form ◽  
Test Results ◽  
Android Application

Lebah madu adalah jenis serangga social yang hidup berkoloni. Lebah memiliki manfaat bagi kehidupan manusia yaitu dalam proses penyerbukan tanaman serta menghasilkan madu yang dapat dikonsumsi karena memilki nilai gizi yang tinggi. Pada sistem peternakan lebah modern ada beberapa hal yang perlu diperhatikan yaitu iklim, lokasi sarang lebah dengan ketersediaan tanaman (bunga) yang menjadi sumber makan bagi lebah dan material sarang lebah. Pada penelitian ini telah dibuat suatu sistem terpadu yang terdiri dari 3 bagian penyusun sistem yaitu hardware yang terdiri dari sensor suhu, kelembaban, load cell dan geo lokasi (penentu lokasi) berikutnya adalah software yang terdiri dari Web Server dan aplikasi Android yang berisi data hasil pembacaan sensor yang disajikan dalam bentuk grafik sehingga memudahkan pembacaan hasil monitoring dari hardware, serta notifikasi apabila tiba saat pemanenan sarang atau kondisi suhu dan kelembaban yang tidak sesuai dengan standar tidak terpenuhi. Hasil pengujian sistem ini didapatkan bahwa Suhu optimal pada kandang lebah dapat dipertahankan dengan aktuator. Aktuator dapat mepertahankan suhu dari 34,4 ℃ ke 32,9℃ selama 1 menit 5 detik dan dari 31,2 ℃ ke 32,2 ℃ selama 1 menit 15 detik. Aplikasi web dan android ini mempermudah para peternak lebah untuk mengelola kondisi sarang lebah dari hasil pengujian untuk monitoring kondisi sarang lebah dapat berjalan dengan baik, dimana data yang ditampilkan adalah suhu, kelembaban dan berat. Honey bees are a type of social insect that live in colonies. Bees have benefits for human life, namely in the process of pollinating plants and producing honey that can be consumed because of their high nutritional value. In the modern beekeeping sistem, there are several things that need to be considered, namely the climate, the location of the beehive and the availability of plants (flowers) which are a source of food for bees and beehive materials. In this research, an integrated system consisting of 3 parts of the system has been created, namely Hardware consisting of temperature, humidity, load cell and geo location sensors. Next is the software consisting of a Web Server and an Android application that contains reading data. sensors are presented in graphical form to facilitate reading of monitoring results from Hardware, as well as notifications when nest harvesting arrives or temperature and humidity conditions that do not comply with standards are not met. The test results of this system show that the optimal temperature in the beehive can be maintained with an actuator. The actuator can maintain temperature from 34.4 ℃ to 32.9 ℃ for 1 minute 5 seconds and from 31.2 ℃ to 32.2 ℃ for 1 minute 15 seconds. This Web and Android application makes it easier for beekeepers to manage the conditions of the beehive. From the test results for monitoring the conditions of the beehive, it can run well, where the data displayed is temperature, humidity and weight.  

scholarly journals Penerapan Metode Integrasi Teileren-Poject pada Program Inovasi IPTEK dan Kreativitas Guru-Guru Elektronika Industri di SMKN 9 Kabupaten Garut dalam Kegiatan Workshop Aplikasi Mikrokontroller

2018 ◽  
Vol 4 (1) ◽  
pp. 41
Author(s):  
Budi Herdiana ◽  
Muhammad Aria ◽  
Tri Rahajoeningroem ◽  
Bobi Kurniawan ◽  
Jana Utama ◽  
...  
Keyword(s):  
Learning Process ◽  
Test Scores ◽  
Test Evaluation ◽  
Test Results ◽  
Community Programs ◽  
Teacher Capacity ◽  
Average Value ◽  
Project Method ◽  
Post Test ◽  
Capacity Improvement

Success of workshop activities in community programs can be seen from the results of these activities which are able to improve students' skills to implement their knowledge that had been obtained previously. This program was done at SMKN 9 aimed at providing innovation and enhancing the creativity of teachers' skills in the field of microcontroller systems. Therefore the ability to understand microcontroller system requires supporting facilities such as hardware and software devices than also require a comprehensive and systematic of learning process. The alternative solution to problem is done by collaborating teileren method and project method simultaneously where learning subject is focused on the workshop material step by step before applying it. The expectation from this program is that teachers can get used to and have the ability to design microcontroller systems that can be applied as teaching materials and curriculum development. The accomplishment of this workshop can be measured by pre-test evaluation which shows value >65% and post-test results which shows an average value of  >70% with an average index of teacher capacity improvement based on final evaluation >60% compared to the previous test scores. 

scholarly journals PID Control System on Brushless DC Motor for Quadcopter Balance

Jurnal INFORM ◽  
2021 ◽  
Vol 6 (2) ◽  
pp. 110-114
Author(s):  
Mochamad Mobed Bachtiar ◽  
Fernando Ardilla ◽  
Muhammad Faiz Hasbi ◽  
Iwan Kurnianto Wibowo
Keyword(s):  
Pid Control ◽  
Control Method ◽  
Dc Motor ◽  
Unmanned Aircraft ◽  
Integrated System ◽  
Brushless Dc Motor ◽  
Test Results ◽  
Brushless Dc ◽  
Aerial Vehicle ◽  
Aircraft System

Unmanned Aerial Vehicle (UAV) is an unmanned aircraft system that is no longer a special need but has become a general need for the community, and one example is used to capture everyday moments through photos or videos from the air. Among the models of UAV aircraft is the quadcopter, where there is a flight controller that functions to fly the quadcopter by adjusting the speed of each motor. The flight controller that is often used today is the Pixhawk manufacturer. The Pixhawk module is an integrated system that the factory has provided, so it cannot be modified in terms of control and I/O. This research focuses on making an independent flight controller that can be used to fly a quadcopter. The control method that is implanted is Proportional Integral Derivative or commonly known as PID. The flight controller uses the PID control method to adjust each Brushless DC Motor (BLDC) speed to maintain stability while flying. From the test results, the quadcopter can fly stably with KP parameters of 2.5, KI of 0.6, and KD of 1.0. The response time in processing feedback is 3s.

Sign in / Sign up

Export Citation Format

Share Document