scholarly journals Efficacy of anti-oxidation potential of homoeopathic medicine Hydrastis canadensis 6C and 200C

2021 ◽  
Vol 5 (2) ◽  
pp. 179-181
Author(s):  
Aysha TP ◽  
Nithyakala . ◽  
Maria Dhivya ◽  
Jenitta EP ◽  
Archana C Ingole
Keyword(s):  
Oxidation Potential ◽  
Hydrastis Canadensis

The oxidation of Inconel alloy MA754 at low oxidation potential

1983 ◽  
Vol 41 ◽  
pp. 218-219
Author(s):  
D. N. Braski ◽  
P. D. Goodell ◽  
J. V. Cathcart ◽  
R. H. Kane
Keyword(s):  
Surface Layer ◽  
Oxidation Potential ◽  
Metal Interface ◽  
Elevated Temperature Strength ◽  
Surface Conditions ◽  
Inconel Alloy ◽  
Inco Alloy ◽  
Resistance To Oxidation ◽  
Oxide Particles ◽  
Cold Worked

It has been known for some time that the addition of small oxide particles to an 80 Ni—20 Cr alloy not only increases its elevated-temperature strength, but also markedly improves its resistance to oxidation. The mechanism by which the oxide dispersoid enhances the oxidation resistance is being studied collaboratively by ORNL and INCO Alloy Products Company.Initial experiments were performed using INCONEL alloy MA754, which is nominally: 78 Ni, 20 Cr, 0.05 C, 0.3 Al, 0.5 Ti, 1.0 Fe, and 0.6 Y2O3 (wt %).Small disks (3 mm diam × 0.38 mm thick) were cut from MA754 plate stock and prepared with two different surface conditions. The first was prepared by mechanically polishing one side of a disk through 0.5 μm diamond on a syntron polisher while the second used an additional sulfuric acid-methanol electropolishing treatment to remove the cold-worked surface layer. Disks having both surface treatments were oxidized in a radiantly heated furnace for 30 s at 1000°C. Three different environments were investigated: hydrogen with nominal dew points of 0°C, —25°C, and —55°C. The oxide particles and films were examined in TEM by using extraction replicas (carbon) and by backpolishing to the oxide/metal interface. The particles were analyzed by EDS and SAD.

Prevalence of antimicrobial fungal metabolites in Hydrastis canadensis crude extracts

Planta Medica ◽  
2015 ◽  
Vol 81 (11) ◽  
Author(s):  
JM Egan ◽  
A Kaur ◽  
HA Raja ◽  
AR Brown ◽  
NH Oberlies ◽  
...  
Keyword(s):  
Fungal Metabolites ◽  
Hydrastis Canadensis ◽  
Crude Extracts

Assessment of Self-Heating Susceptibility of Indian Coal Seams – A Neural Network Approach

2014 ◽  
Vol 59 (4) ◽  
pp. 1061-1076 ◽  
Author(s):  
D.C. Panigrahi ◽  
S.K. Ray
Keyword(s):  
Neural Network ◽  
Spontaneous Combustion ◽  
Potential Method ◽  
Oxidation Potential ◽  
Wet Oxidation ◽  
Experimental Conditions ◽  
Neural Network Approach ◽  
Indian Coal ◽  
Petrographic Analyses ◽  
Artificial Neural Network Ann

Abstract The paper addresses an electro-chemical method called wet oxidation potential technique for determining the susceptibility of coal to spontaneous combustion. Altogether 78 coal samples collected from thirteen different mining companies spreading over most of the Indian Coalfields have been used for this experimental investigation and 936 experiments have been carried out by varying different experimental conditions to standardize this method for wider application. Thus for a particular sample 12 experiments of wet oxidation potential method were carried out. The results of wet oxidation potential (WOP) method have been correlated with the intrinsic properties of coal by carrying out proximate, ultimate and petrographic analyses of the coal samples. Correlation studies have been carried out with Design Expert 7.0.0 software. Further, artificial neural network (ANN) analysis was performed to ensure best combination of experimental conditions to be used for obtaining optimum results in this method. All the above mentioned analysis clearly spelt out that the experimental conditions should be 0.2 N KMnO4 solution with 1 N KOH at 45°C to achieve optimum results for finding out the susceptibility of coal to spontaneous combustion. The results have been validated with Crossing Point Temperature (CPT) data which is widely used in Indian mining scenario.

Recent advances in the Silver catalysed synthesis of furan and its applications

2020 ◽  
Vol 09 ◽  
Author(s):  
C M A Afsina ◽  
Mohan Neetha ◽  
Thaipparambil Aneeja ◽  
Gopinathan Anilkumar
Keyword(s):  
Organic Synthesis ◽  
Oxidation Potential ◽  
Silver Complexes ◽  
Wide Spread ◽  
Silver Catalysts ◽  
Recent Advances ◽  
High Oxidation ◽  
Furan Moiety ◽  
Anti Fungal ◽  
Fragrance Compounds

: Furan and its derivatives find wide-spread application as pharmaceuticals, pigments, dyes, brighteners, flavour & fragrance compounds and insecticides. They also exhibit anti-hyperglycemic, analgesic, anti-inflammatory, antibacterial, anti-fungal and anti-tumour activities. Silver catalysts are nowadays commonly used in organic synthesis due to the high oxidation potential and versatile nature of silver complexes. In this review, we summarise the recent advances in the synthesis and applications of furan moiety using silver catalysis and covers literature from 2015-2020.

Effects of Doping on the Electrochemical and Electrical Properties of Poly(2,5-di(2-thienyl)pyrrole)

1999 ◽  
Vol 64 (8) ◽  
pp. 1357-1368 ◽  
Author(s):  
Enric Brillas ◽  
José Carrasco ◽  
Ramon Oliver ◽  
Francesc Estrany ◽  
Víctor Ruiz
Keyword(s):  
Mass Spectrometry ◽  
Fast Atom Bombardment ◽  
Oxidation Potential ◽  
Ethanolic Solution ◽  
Pt Electrode ◽  
Reversible Process ◽  
Oxidation Potentials ◽  
Lower Productivity ◽  
Polymeric Chains ◽  
Linear Molecules

The electropolymerization of 2,5-di(2-(thienyl)pyrrole) (SNS) on a Pt electrode from ethanolic solution with LiClO4 or LiCl as electrolyte has been studied by cyclic voltammetry (CV) and chronoamperometry (CA). In both media, a quasi-reversible process has been indicated by CV, reversing the scan at low oxidation potentials. Under these conditions, reducible positive charges formed in both oxidized polymers are compensated by the entrance of anions from solution. Elemental analysis reveals that polymers generated at a low oxidation potential by CA contain a 21.03% (w/w) of ClO4- or a 9.56% (w/w) of Cl-. The poly(SNS) doped with Cl- presents higher proportion of reducible positive charges, higher polymerization charge and lower productivity. A much higher electrical conductivity, however, has been found for the poly(SNS) doped with ClO4-. Both polymers are soluble in DMSO, acetone and methanol. The dimer, trimer, tetramer and pentamer have been detected as soluble and neutral linear oligomers by mass spectrometry-fast atom bombardment. The analysis of polymers by infrared spectroscopy confirms the predominant formation of linear molecules with α-α linkages between monomeric units. A condensation mechanism involving one-electron oxidation of all electrogenerated linear and neutral polymeric chains is proposed to explain the SNS electropolymerization.

scholarly journals Fine-Tuning the Biological Profile of Multitarget Mitochondriotropic Antioxidants for Neurodegenerative Diseases

Antioxidants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 329
Author(s):  
Daniel Chavarria ◽  
Ophelie Da Silva ◽  
Sofia Benfeito ◽  
Sandra Barreiro ◽  
Jorge Garrido ◽  
...  
Keyword(s):  
Inhibitory Activity ◽  
Antioxidant Properties ◽  
Neuroblastoma Cells ◽  
Oxidation Potential ◽  
Fine Tuning ◽  
Mitochondrial Oxidative Stress ◽  
Electric Eel ◽  
Ic50 Values ◽  
System Extension ◽  
Inhibition Potency

Neurotransmitter depletion and mitochondrial dysfunction are among the multiple pathological events that lead to neurodegeneration. Following our previous studies related with the development of multitarget mitochondriotropic antioxidants, this study aims to evaluate whether the π-system extension on the chemical scaffolds of AntiOXCIN2 and AntiOXCIN3 affects their bioactivity and safety profiles. After the synthesis of four triphenylphosphonium (TPP+) conjugates (compounds 2–5), we evaluated their antioxidant properties and their effect on neurotransmitter-metabolizing enzymes. All compounds were potent equine butyrylcholinesterase (eqBChE) and moderate electric eel acetylcholinesterase (eeAChE) inhibitors, with catechols 4 and 5 presenting lower IC50 values than AntiOXCIN2 and AntiOXCIN3, respectively. However, differences in the inhibition potency and selectivity of compounds 2–5 towards non-human and human cholinesterases (ChEs) were observed. Co-crystallization studies with compounds 2–5 in complex with human ChEs (hChEs) showed that these compounds exhibit different binging modes to hAChE and hBChE. Unlike AntiOXCINs, compounds 2–5 displayed moderate human monoamine oxidase (hMAO) inhibitory activity. Moreover, compounds 4 and 5 presented higher ORAC-FL indexes and lower oxidation potential values than the corresponding AntiOXCINs. Catechols 4 and 5 exhibited broader safety windows in differentiated neuroblastoma cells than benzodioxole derivatives 2 and 3. Compound 4 is highlighted as a safe mitochondria-targeted antioxidant with dual ChE/MAO inhibitory activity. Overall, this work is a contribution for the development of dual therapeutic agents addressing both mitochondrial oxidative stress and neurotransmitter depletion.

scholarly journals Simultaneous electrochemical sensing of dihydroxy benzene isomers at cost-effective allura red polymeric film modified glassy carbon electrode

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Pattan-Siddappa Ganesh ◽  
Ganesh Shimoga ◽  
Seok-Han Lee ◽  
Sang-Youn Kim ◽  
Eno E. Ebenso
Keyword(s):  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Limit Of Detection ◽  
Tap Water ◽  
Differential Pulse ◽  
Oxidation Potential ◽  
Electrochemical Sensing ◽  
Carbon Electrode ◽  
Buffer Solution ◽  
Allura Red

Abstract Background A simple and simultaneous electrochemical sensing platform was fabricated by electropolymerization of allura red on glassy carbon electrode (GCE) for the interference-free detection of dihydroxy benzene isomers. Methods The modified working electrode was characterized by electrochemical and field emission scanning electron microscopy methods. The modified electrode showed excellent electrocatalytic activity for the electrooxidation of catechol (CC) and hydroquinone (HQ) at physiological pH of 7.4 by cyclic voltammetric (CV) and differential pulse voltammetric (DPV) techniques. Results The effective split in the overlapped oxidation signal of CC and HQ was achieved in a binary mixture with peak to peak separation of 0.102 V and 0.103 V by CV and DPV techniques. The electrode kinetics was found to be adsorption-controlled. The oxidation potential directly depends on the pH of the buffer solution, and it witnessed the transfer of equal number of protons and electrons in the redox phenomenon. Conclusions The limit of detection (LOD) for CC and HQ was calculated to be 0.126 μM and 0.132 μM in the linear range of 0 to 80.0 μM and 0 to 110.0 μM, respectively, by ultra-sensitive DPV technique. The practical applicability of the proposed sensor was evaluated for tap water sample analysis, and good recovery rates were observed. Graphical abstract Electrocatalytic interaction of ALR/GCE with dihydroxy benzene isomers.

scholarly journals Photocatalytic Reduction of CO2 to Methanol Using a Copper-Zirconia Imidazolate Framework

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 346
Author(s):  
Sonam Goyal ◽  
Maizatul Shima Shaharun ◽  
Ganaga Suriya Jayabal ◽  
Chong Fai Kait ◽  
Bawadi Abdullah ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalyst Support ◽  
Oxidation Potential ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Optimum Parameters ◽  
Reduction Of Co2 ◽  
Enhanced Yield

A set of novel photocatalysts, i.e., copper-zirconia imidazolate (CuZrIm) frameworks, were synthesized using different zirconia molar ratios (i.e., 0.5, 1, and 1.5 mmol). The photoreduction process of CO2 to methanol in a continuous-flow stirred photoreactor at pressure and temperature of 1 atm and 25 °C, respectively, was studied. The physicochemical properties of the synthesized catalysts were studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. The highest methanol activity of 818.59 µmol/L.g was recorded when the CuZrIm1 catalyst with Cu/Zr/Im/NH4OH molar ratio of 2:1:4:2 (mmol/mmol/mmol/M) was employed. The enhanced yield is attributed to the presence of Cu2+ oxidation state and the uniformly dispersed active metals. The response surface methodology (RSM) was used to optimize the reaction parameters. The predicted results agreed well with the experimental ones with the correlation coefficient (R2) of 0.99. The optimization results showed that the highest methanol activity of 1054 µmol/L.g was recorded when the optimum parameters were employed, i.e., stirring rate (540 rpm), intensity of light (275 W/m2) and photocatalyst loading (1.3 g/L). The redox potential value for the CuZrIm1 shows that the reduction potential is −1.70 V and the oxidation potential is +1.28 V for the photoreduction of CO2 to methanol. The current work has established the potential utilization of the imidazolate framework as catalyst support for the photoreduction of CO2 to methanol.

Sign in / Sign up

Export Citation Format

Share Document