scholarly journals Design and Build Temperature Control and Monitoring in Diesel Engines Using Mobile

2020 ◽  
Vol 10 (1) ◽  
pp. 31-37
Author(s):  
Mohammad Hasan Fuadi
Keyword(s):  
Diesel Engine ◽  
Temperature Control ◽  
Diesel Engines ◽  
Temperature Sensor ◽  
Cooling System ◽  
Cooling Water ◽  
Solenoid Valve ◽  
Valve Opening ◽  
Opening And Closing ◽  
And Control

Diesel engines is generally used for industrial and agricultural machines. Few people care about the engine temperature so it is forced to reach temperature of 100oC, which causes overheating of the diesel engine and has an impact on the performance itself. This also uses a hopper cooling system which is certainly not effective, because it's necessary to see that the water in the reservoir is still or not, also not equipped with an engine temperature display so it's difficult to ascertain the temperature inside. This study aims to monitor and control the temperature of cooling water. Operation of temperature control uses a telecontrol system that is connected to network (Internet of Things) so diesel temperature control can be done remotely. Monitoring of temperature and water level in the reserve tank using Web Mobile. In addition, there is a temperature sensor that is used to measure the temperature of the cooling water so that users can monitor the temperature of the diesel engine on Web Mobile. The test results obtained, the temperature sensor has an average temperature reading error of 0.031004%. Diesel engines with controlled solenoid valve cooling systems can produce ideal temperatures compared to when the solenoid valve is open (using the radiator continuously) or when the solenoid valve is Closed (without using a radiator). When the solenoid is controlled the engine temperature can be ideal because the solenoid valve opening and closing system has the lowest temperature of 56.34oC and the highest temperature of only 80.85oC.

A simplified method of temperature control maximizing productivity of the batch reactor; The effect of inertia of the cooling system

1982 ◽  
Vol 47 (2) ◽  
pp. 454-464 ◽  
Author(s):  
František Jiráček ◽  
Josef Horák
Keyword(s):  
Mathematical Model ◽  
Temperature Control ◽  
Cooling System ◽  
Batch Reactor ◽  
Exothermic Reaction ◽  
Cooling Capacity ◽  
Variable Activity ◽  
Simplified Method ◽  
Opening And Closing ◽  
Time Of Operation

The effect has been studied of the inertia of the cooling system on the reliability of control of the temperature of the reaction mixture. The study has been made using a mathematical model of the batch reactor with an exothermic reaction. The temperature has been controlled by a two-level controller opening and closing the flow of the coolant. The aim of the control has been to maintain a constant value of the degree of utilization of the cooling capacity of the reactor. The instantaneous value of the degree of utilization has been assessed from the ratio of times for which the cooling system is idle to the time of operation. The reliability of control has been studied for variable activity of the catalyst.

Computer aided study of the transient performances of a highly rated sequentially turbocharged marine diesel engine

1998 ◽  
Vol 212 (3) ◽  
pp. 185-196 ◽  
Author(s):  
X Tauzia ◽  
J F Hetet ◽  
P Chesse ◽  
G Crosshans ◽  
L Mouillard
Keyword(s):  
Experimental Data ◽  
Diesel Engine ◽  
Diesel Engines ◽  
Marine Diesel Engine ◽  
Computer Aided ◽  
Compressor Surge ◽  
Marine Diesel ◽  
Valve Opening ◽  
Transient Phases ◽  
Good Agreement

The sequential turbocharging technique described in this paper leads to an improvement in the operations of highly rated diesel engines, in particular at part loads (better air admission). However, transient phases such as a switch from one turbocharger to two turbochargers can be difficult, mainly because of the inertia of the turbochargers. In order to simulate the dynamics of turbocharged diesel engines, the SELENDIA software has been extended. When applied to two different engines (12 and 16 cylinders), the program shows good agreement with the experimental data. Moreover, the compressor surge has been investigated during faulty switch processes. The software has then been used for predictive studies to evaluate the possibility of adapting sequential turbocharging to a 20-cylinder engine and to calibrate the optimum switching conditions (air and gas valve opening timing).

scholarly journals Study on the Effect of Diaphragm Booster on the Pulsed Heat Transfer of Cooling System

2020 ◽  
Vol 6 (4) ◽  
pp. 214-222
Author(s):  
Y. Zhou ◽  
Z. Liu ◽  
A. Golyanin
Keyword(s):  
Heat Exchange ◽  
Diesel Engine ◽  
Cooling System ◽  
Cooling Water ◽  
Check Valve ◽  
Cylinder Liner ◽  
Circulation System ◽  
Engine Cylinder ◽  
Hydraulic Accumulator ◽  
Engine Cylinder Liner

This paper has developed a diesel engine cylinder liner and cooling water heat exchange enhancement device, including diesel engine cylinder liner, cylinder liner water cooler, hydraulic accumulator, check valve, diaphragm booster, centrifugal water pump, pulse valve and Conical tube. As well as the pulsating circulation system and booster system composed of equipment. The device heats the heat generated by the diesel engine cylinder liner in a pulsating circulation system through a cylinder circulator in a pulsating circulation system to exchange heat with the external low-temperature seawater. By controlling the opening and closing of the pulsating valve in the pulsating circulation system, fluid is generated in the pipe. Pulsing and hydraulically impacting the diaphragm booster connected near the pulsation valve pipeline, the fluid at the outlet of the diaphragm booster is subjected to hydraulic shock and circulates in a closed booster circuit connected to the diaphragm booster and passes through the cone during the flow. The shaped tube accelerates the fluid to return to the diaphragm supercharger, and the kinetic energy of the fluid is converted into the pressure in the pulsating heat exchange system by impacting the elastic diaphragm of the diaphragm supercharger, so that the pulsating speed is increased. The present invention is to increase the pulsating velocity of the diaphragm. Based on the design of the compressor drive, it improves energy efficiency, avoids the use of high-power water pumps, and saves equipment construction and daily operation.

Methods for Determining the Thermal State of Medium-Speed Diesel Engines Taking into Account Boiling of the Coolant

2020 ◽  
pp. 22-28
Author(s):  
L.L. Myagkov ◽  
V.M. Sivachev
Keyword(s):  
Heat Transfer ◽  
Diesel Engine ◽  
Diesel Engines ◽  
Thermal State ◽  
Cooling System ◽  
Fatigue Cracks ◽  
Cylinder Liner ◽  
Thermal Factor ◽  
Medium Speed ◽  
Thermal Fatigue Cracks

Forcing medium-speed diesel engines by increasing the mean effective pressure leads to an increase in the thermal factor of the engine parts. High temperatures of the cylinder head fire deck and the cylinder liner working surface cause thermal fatigue cracks in these parts as well as piston scuffing. Therefore, the development of new methods of intensifying heat transfer in the cooling gallery and refined methods for determining the engine parts thermal state is currently relevant. In both areas of research, a significant role is played by the process of coolant boiling, which significantly intensifies heat transfer in the cooling system. A review of the literature showed that the existing methods of mathematical modeling of conjugate heat transfer in the cooling cavities taking into account the boiling process have a number of significant drawbacks. This paper presents the developed mathematical model and methods for determining the thermal state of medium-speed diesel engine parts taking into account boiling of the coolant, thus making it possible to combine the advantages of both the engineering approach and numerical simulation based on computational fluid dynamics. The thermal state of a new generation medium-speed diesel engine D500 was calculated and the thermal factor of the main engine parts was estimated.

Research and Application of the Auto-Control Cooling System for the Diesel Engine

2013 ◽  
Vol 805-806 ◽  
pp. 1970-1974
Author(s):  
Hong Lei Pang ◽  
Cai Yun Zhu ◽  
Zhi Bin Ni ◽  
Yao Hua Wei
Keyword(s):  
Diesel Engine ◽  
Water Temperature ◽  
Cooling System ◽  
Cooling Water ◽  
Coolant Temperature ◽  
Saving Rate ◽  
Fuel Saving ◽  
Single Chip ◽  
Cooling Water Temperature ◽  
Operation Conditions

In order to solve the problem that the traditional cooling system cannot adjust the cooling water temperature to the different operation conditions of diesel engine, the auto-control cooling system is designed. Using it, the coolant temperature can be adjusted automatically by the single-chip which controls the transducer-controlled pump and the electronic dividing valve which replaces the thermostat. We use the thermal equilibrium bench to verify the figures, and the result is show that using the exhaust of generator heats the cooling water can shorten 13 minutes in starting process and the cooling water temperature adjusted automatically to the changing operation conditions of iesel can decrease the fuel consumption remarkably, the highest fuel saving rate reached 5.4%, the averagely fuel saving rate reached 3.6%.

Study on Matching and Optimization of Low-Speed Diesel Engine’s Cooling System

2011 ◽  
Vol 148-149 ◽  
pp. 71-74 ◽  
Author(s):  
Guo Jin Chen ◽  
Zhong Min Liu ◽  
Ting Ting Liu ◽  
Shao Hui Su ◽  
Guang Jie Yuan ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Control Method ◽  
Cooling System ◽  
Cooling Water ◽  
The Body ◽  
Low Speed ◽  
Engine Cooling ◽  
Marine Diesel ◽  
Body Cooling ◽  
The Impact

Aiming at the high-power low-speed marine diesel engine, the paper analyzes the impact of the diesel engine’s cooling to the power, economy and NOx’s emission, studies the variable flow control method and system of the diesel engine cooling water and proposes the scheme setting up the intercooler system and the body cooling system independently in the diesel engine. The results show that the methods and systems are better to improve the engine power, reduce the fuel consumption and NOx’s emission.

scholarly journals Using Simulation for Development of The Systems of Automobile Gas Diesel Engine and its Operation Control

2018 ◽  
Vol 7 (2.28) ◽  
pp. 288 ◽  
Author(s):  
Mikhail G. Shatrov ◽  
Vladimir V. Sinyavski ◽  
Andrey Yu. Dunin ◽  
Ivan G. Shishlov ◽  
Andrey V. Vakulenko ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Fuel Efficiency ◽  
Fuel Supply ◽  
High Fuel Efficiency ◽  
Fuel Substitution ◽  
Basic Parameters ◽  
Cr System ◽  
And Control

The work was aimed at the development of gas supply, diesel fuel supply and electronic control systems for automobile gas diesel engines. Different ways of diesel engine conversion to operate on natural gas were analyzed. Gas diesel process with minimized ignition portion of diesel fuel injected by the CR system was selected. Electronic engine control and modular gas feed systems which can be used on high- and middle-speed gas diesel engines were developed. Diesel CR fuel supply system was developed in cooperation with the industrial partner. Simulation was used to obtain basic parameters and control methods of these systems. The base diesel engine was converted into gas diesel engine using the systems developed. Bench tests of the gas diesel engine demonstrated a high share of diesel fuel substitution with gas, high fuel efficiency and large decrease of NOх and СО2 emissions. 

Some Aspects of Combustion and Heat Release in Diesel Engines

1977 ◽  
Author(s):  
K.S. Kannan
Keyword(s):  
Diesel Engine ◽  
Diesel Engines ◽  
Digital Computer ◽  
Valve Closure ◽  
Inlet Valve ◽  
First Law Of Thermodynamics ◽  
Valve Opening ◽  
The University ◽  
University Of Manchester ◽  
Heat Released

The author discusses the various stages of combustion in diesel engines from experiments conducted by himself and also by various other research workers in this field. He then outlines the technique used in predicting heat released by the fuel during combustion in a diesel engine - a techniq ue on which he has worked during his Master's course at the University of Manchester Institute of Science and Technology. The technique consists of applying the first Law of Thermodynamics in steps of the period from inlet valve closure to exhaust valve opening. The First Law equation applicable is reformulated so as to be used on the digital computer.

Sign in / Sign up

Export Citation Format

Share Document