scholarly journals Robust Hydrogen Production via Pickering Interfacial Catalytic Photoreforming of n-Octanol-Water Biphasic System

2021 ◽  
Vol 9 ◽  
Author(s):  
Chao Wang ◽  
Weilin Zhong ◽  
Suqing Peng ◽  
Jingtao Zhang ◽  
Riyang Shu ◽  
...  

Pickering emulsion offers a promising platform for conducting interfacial reactions between immiscible reagents; it is particularly suitable for hydrogen production by photoreforming of non-water soluble biomass liquid and water. Herein, Pt-promoted (001)-facet-dominated anatase TiO2 nanosheets were synthesized by a hydrothermal route associated with microfluidic technology for high activity and metal dispersion, and selective surface modification was carried out for preparing Janus particles. Photoreforming hydrogen production through n-octanol and water that formed O/W microemulsion with an average diameter of 540 µm was achieved to obtain amphiphilic catalyst. The as-prepared 2D Janus-type catalysts exhibited remarkably stable emulsification performance as well as photocatalytic activity. This finding indicates that triethoxyfluorosilane had negligible impact on the catalytic performance, yet provided a remarkable benefit to large specific surface area at microemulsion interface, thereby enhancing the H2 yield up to 2003 μmol/g. The cyclic experiments indicate that the decrease in cyclic performance was more likely to be caused by the coalescence of the microemulsion rather than the decrease in catalytic activity, and the microemulsion could be easily recovered by simply hand shaking to more than 96% of the initial performance.

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 88
Author(s):  
Diana García-Pérez ◽  
Maria Consuelo Alvarez-Galvan ◽  
Jose M. Campos-Martin ◽  
Jose L. G. Fierro

Catalysts based on zirconia- and alumina-supported tungsten oxides (15 wt % W) with a small loading of platinum (0.3 wt % Pt) were selected to study the influence of the reduction temperature and the nature of the support on the hydroisomerization of n-dodecane. The reduction temperature has a major influence on metal dispersion, which impacts the catalytic activity. In addition, alumina and zirconia supports show different catalytic properties (mainly acid site strength and surface area), which play an important role in the conversion. The NH3-TPD profiles indicate that the acidity in alumina-based catalysts is clearly higher than that in their zirconia counterparts; this acidity can be attributed to a stronger interaction of the WOx species with alumina. The PtW/Al catalyst was found to exhibit the best catalytic performance for the hydroisomerization of n-dodecane based on its higher acidity, which was ascribed to its larger surface area relative to that of its zirconia counterparts. The selectivity for different hydrocarbons (C7–10, C11 and i-C12) was very similar for all the catalysts studied, with branched C12 hydrocarbons being the main products obtained (~80%). The temperature of 350 °C was clearly the best reduction temperature for all the catalysts studied in a trickled-bed-mode reactor.


Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 241
Author(s):  
Thangavel Ponrasu ◽  
Bei-Hsin Chen ◽  
Tzung-Han Chou ◽  
Jia-Jiuan Wu ◽  
Yu-Shen Cheng

The fast-dissolving drug delivery systems (FDDDSs) are developed as nanofibers using food-grade water-soluble hydrophilic biopolymers that can disintegrate fast in the oral cavity and deliver drugs. Jelly fig polysaccharide (JFP) and pullulan were blended to prepare fast-dissolving nanofiber by electrospinning. The continuous and uniform nanofibers were produced from the solution of 1% (w/w) JFP, 12% (w/w) pullulan, and 1 wt% Triton X-305. The SEM images confirmed that the prepared nanofibers exhibited uniform morphology with an average diameter of 144 ± 19 nm. The inclusion of JFP in pullulan was confirmed by TGA and FTIR studies. XRD analysis revealed that the increased crystallinity of JFP/pullulan nanofiber was observed due to the formation of intermolecular hydrogen bonds. The tensile strength and water vapor permeability of the JFP/pullulan nanofiber membrane were also enhanced considerably compared to pullulan nanofiber. The JFP/pullulan nanofibers loaded with hydrophobic model drugs like ampicillin and dexamethasone were rapidly dissolved in water within 60 s and release the encapsulants dispersive into the surrounding. The antibacterial activity, fast disintegration properties of the JFP/pullulan nanofiber were also confirmed by the zone of inhibition and UV spectrum studies. Hence, JFP/pullulan nanofibers could be a promising carrier to encapsulate hydrophobic drugs for fast-dissolving/disintegrating delivery applications.


Catalysts ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 891
Author(s):  
Ken-ichi Fujita ◽  
Takayoshi Inoue ◽  
Toshiki Tanaka ◽  
Jaeyoung Jeong ◽  
Shohichi Furukawa ◽  
...  

A new catalytic system has been developed for hydrogen production from various monosaccharides, mainly glucose, as a starting material under reflux conditions in water in the presence of a water-soluble dicationic iridium complex bearing a functional bipyridine ligand. For example, the reaction of D-glucose in water under reflux for 20 h in the presence of [Cp*Ir(6,6′-dihydroxy-2,2′-bipyridine)(H2O)][OTf]2 (1.0 mol %) (Cp*: pentamethylcyclopentadienyl, OTf: trifluoromethanesulfonate) resulted in the production of hydrogen gas in 95% yield. In the present catalytic reaction, it was experimentally suggested that dehydrogenation of the alcoholic moiety at 1-position of glucose proceeded.


2018 ◽  
Vol 307 ◽  
pp. 224-230 ◽  
Author(s):  
Alberto Rodriguez-Gomez ◽  
Rosa Pereñiguez ◽  
Alfonso Caballero

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1890
Author(s):  
Xiang Lai ◽  
Xuan Zhang ◽  
Shukai Li ◽  
Jie Zhang ◽  
Weifeng Lin ◽  
...  

Water soluble organic molecular pollution endangers human life and health. It becomes necessary to develop highly stable noble metal nanoparticles without aggregation in solution to improve their catalytic performance in treating pollution. Polyethyleneimine (PEI)-based stable micelles have the potential to stabilize noble metal nanoparticles due to the positive charge of PEI. In this study, we synthesized the amphiphilic PEI-oleic acid molecule by acylation reaction. Amphiphilic PEI-oleic acid assembled into stable PEI-oleic acid micelles with a hydrodynamic diameter of about 196 nm and a zeta potential of about 34 mV. The PEI-oleic acid micelles-stabilized palladium nanoparticles (PO-PdNPsn) were prepared by the reduction of sodium tetrachloropalladate using NaBH4 and the palladium nanoparticles (PdNPs) were anchored in the hydrophilic layer of the micelles. The prepared PO-PdNPsn had a small size for PdNPs and good stability in solution. Noteworthily, PO-PdNPs150 had the highest catalytic activity in reducing 4-nitrophenol (4-NP) (Knor = 18.53 s−1mM−1) and oxidizing morin (Knor = 143.57 s−1M−1) in aqueous solution than other previous catalysts. The enhanced property was attributed to the improving the stability of PdNPs by PEI-oleic acid micelles. The method described in this report has great potential to prepare many kinds of stable noble metal nanoparticles for treating aqueous pollution.


1946 ◽  
Vol s2-87 (348) ◽  
pp. 393-439
Author(s):  
J. W. BEAMENT

The main regions of the Ehodnius prolixus egg-shell have been defined; a concise definition has been obtained for the term ‘chorion’. The formation and structure of the unspecialized chorion has been followed from the time of differentiation of the follicle cells, up to the completion of the shell, and an assessment made of the chemistry and permeability of each component shell layer. The follicle cells are binucleate; changes in morphology and histology prior to secretion of the shell are outlined. The secretory products of the follicle cells fall naturally into an endochorion and an exochorion; the endochorion consists of five modifications of a proteinaceous substance. They are, in order of secretion: 1. The Inner Polyphenol Layer, which consists of a series of tanned granules of average diameter 2µ, containing large quantities of polyphenols. The layer is discontinuous and has no effect on permeability. 2. The Resistant Protein Layer, a tanned and possibly vulcanized layer of protein, 1 to 2µ, thick, containing diffuse polyphenols. It is resistant to strong acids and bases, and permeable to water, ions, and large water-soluble molecules. 3. The Outer Polyphenol Layer, which is similar to the inner layer, but has more minute granules. 4. The Amber Layer.--This is the only coloured layer of the shell, and is less than 0-1µthick. It consists of tanned protein to which oil is added after secretion. It is therefore a lipidized protein, which is excessively resistant to acids and alkalies, and permeable to oils and oil-soluble material and to small ions and water. 5. The Soft Protein Layer.--This is a thick laminated layer some 8µ. thick, similar to, but less resistant than, the resistant protein layer. It contains polyphenols and tyrosine. The layer is freely permeable to water-soluble substances. Throughout the secretion of the endochorion, the follicle cells stain deeply and appear to be filled with the protein components of the shell. The exochorion consists of two layers of the lipoprotein ‘chorionin’. 6. The Soft Exochorion Layer is a lipoprotein which is soluble in potash but not in strong acids; the layer is permeable to lipoid solvents and to water and small ions, but not to larger particles. It is 8µ thick at its maximum thickness, but contains follicular pits which, during secretion, are filled by long processes from the follicle cells. 7. The Eesistant Exochorion Layer is a more resistant form of chorionin. It lines the pits and covers the surface of the shell, giving rise to the polygonal markings corresponding to the follicle cells, each with a pit at its centre. The follicle cells contain quantities of lipoprotein during this phase of secretion, and are difficult to stain. A method of staining is described which shows that pore canals of two varieties are present in the exochorion layers only. They run from the walls of the pits but do not reach the endochorion. None of the layers of the chorion waterproofs the shell. In the rear end of the shell, the outer polyphenol layer is displaced towards the exochorion, thus increasing the resistant protein layer and reducing the soft protein layer. It is shown that all seven layers are present in the neck, and in the central region of the cap, and that the order of secretion is the same. Modifications are produced by variations in the thickness of the various layers. In the neck, the soft protein layer is reduced; in the cap, the resistant protein layer is reduced while the amber layer is 2µ thick, giving the cap a brown appearance. The soft protein layer is extremely thin and irregular while the exochorion layers are 16 µ thick. Pore canals are again present in two varieties. Some analysis is made of the formation of follicular pits; this appears to be correlated with the thickness of the exochorion and endochorion layers.


2016 ◽  
Vol 16 (4) ◽  
pp. 4029-4034 ◽  
Author(s):  
Chunxia Liu ◽  
Lixia Yang ◽  
Dan Yue ◽  
Mengnan Wang ◽  
Lin Jin ◽  
...  

Rare earth ions (Tb3+, Eu3+) doped CaWO4 microstructures were synthesized by a facile hydrothermal route without using any templates and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) spectrum. The results indicate that the asprepared samples are well crystallized with scheelite structure of CaWO4, and the average diameter of the microstructures is 2∼4 μm. The morphology of CaWO4:Eu3+ microstructures can be controllably changed from microspheres to microflowers through altering the doping concentration of Eu3+ from 3% to 35%, and the microflowers are constructed by a number of CaWO4:Eu3+ nanoflakes. Under the excitation of UV light, the emission spectrum of CaWO4:Eu3+ is composed of the characteristics emission of Eu3+ 5D0-7FJ (J = 1, 2, 3, 4) transitions, and that of CaWO4:Tb3+ is composed of Tb3+ 5D4-7FJ (J = 6, 5, 4, 3) transitions. Both of the optimal doping concentrations of Tb3+ and Eu3+ in CaWO4 microstructures are about 5%.


2014 ◽  
Vol 145 ◽  
pp. 85-90 ◽  
Author(s):  
Agnieszka M. Ruppert ◽  
Michał Niewiadomski ◽  
Jacek Grams ◽  
Witold Kwapiński

2018 ◽  
Vol 226 ◽  
pp. 827-837 ◽  
Author(s):  
Xuehua Zou ◽  
Tianhu Chen ◽  
Ping Zhang ◽  
Dong Chen ◽  
Junkai He ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document