scholarly journals Light Intensity and Quality from Sole-source Light-emitting Diodes Impact Growth, Morphology, and Nutrient Content of Brassica Microgreens

HortScience ◽  
2016 ◽  
Vol 51 (5) ◽  
pp. 497-503 ◽  
Author(s):  
Joshua R. Gerovac ◽  
Joshua K. Craver ◽  
Jennifer K. Boldt ◽  
Roberto G. Lopez
Keyword(s):  
Light Emitting Diodes ◽  
Dry Weight ◽  
Nutrient Content ◽  
Sole Source ◽  
Photon Flux ◽  
Light Sources ◽  
Growth Morphology ◽  
Hypocotyl Length ◽  
Photoelectric Conversion ◽  
Light Emitting

Multilayer vertical production systems using sole-source (SS) lighting can be used for the production of microgreens; however, traditional SS lighting methods can consume large amounts of electrical energy. Light-emitting diodes (LEDs) offer many advantages over conventional light sources, including high photoelectric conversion efficiencies, narrowband spectral light quality (LQ), low thermal output, and adjustable light intensities (LIs). The objective of this study was to quantify the effects of SS LEDs of different light qualities and intensities on growth, morphology, and nutrient content of Brassica microgreens. Purple kohlrabi (Brassica oleracea L. var. gongylodes L.), mizuna (Brassica rapa L. var. japonica), and mustard [Brassica juncea (L.) Czern. ‘Garnet Giant’] were grown in hydroponic tray systems placed on multilayer shelves in a walk-in growth chamber. A daily light integral (DLI) of 6, 12, or 18 mol·m−2·d−1 was achieved from commercially available SS LED arrays with light ratios (%) of red:green:blue 74:18:8 (R74:G18:B8), red:blue 87:13 (R87:B13), or red:far-red:blue 84:7:9 (R84:FR7:B9) with a total photon flux (TPF) from 400 to 800 nm of 105, 210, or 315 µmol·m−2·s−1 for 16 hours. Regardless of LQ, as the LI increased from 105 to 315 µmol·m−2·s−1, hypocotyl length (HL) decreased and percent dry weight (DW) increased for kohlrabi, mizuna, and mustard microgreens. With increasing LI, leaf area (LA) of kohlrabi generally decreased and relative chlorophyll content (RCC) increased. In addition, nutrient content increased under low LIs regardless of LQ. The results from this study can help growers to select LIs and LQs from commercially available SS LEDs to achieve preferred growth characteristics of Brassica microgreens.

The growth and morphology of microgreens is associated with modified ascorbate and anthocyanin profiles in response to the intensity of sole-source light-emitting diodes

2020 ◽  
Author(s):  
Chase Jones-Baumgardt ◽  
Qinglu Ying ◽  
Youbin Zheng ◽  
Gale G. Bozzo
Keyword(s):  
Light Emitting Diodes ◽  
Photosynthetic Pigment ◽  
Sole Source ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Total Phenolic ◽  
Hypocotyl Length ◽  
Total Anthocyanin ◽  
Light Emitting ◽  
Phytochemical Profiles

Sole-source light-emitting diodes (LEDs) are alternatives to fluorescent tubes and high intensity discharge lamps that are routinely used for indoor cultivation of horticultural commodities, including microgreens. This study examined the effect of photosynthetic photon flux density (PPFD) from LEDs on phytochemical profiles in organically grown kale, cabbage, arugula, and mustard microgreens, and their association with growth and morphological attributes. LEDs were used to deliver a 15% blue light and 85% red light mixture to microgreens at varying PPFDs between 100 and 600 μmol m-2 s-1. For all microgreens, increased concentrations of ascorbate (total and reduced) and total anthocyanin were proportional to PPFD. Total phenolic concentrations were elevated in all four microgreens at high PPFDs, whereas chlorophyll concentrations declined in arugula cabbage and mustard. A principal component analysis revealed anthocyanins and phenolics were associated with ascorbate levels in all microgreens, but not with chlorophylls or carotenoids. At high PPFDs photosynthetic pigment levels were negatively associated with fresh and dry weight to varying degrees. Anthocyanins, phenolics and ascorbate were negatively correlated with hypocotyl length and the colour attribute hue angle in all microgreens. These results indicate that microgreen growth and morphology are associated with altered phytochemical profiles during cultivation under sole source LEDs.

scholarly journals Effects of Artificial Light Treatments on Growth, Mineral Composition, Physiology, and Pigment Concentration in Dieffenbachia maculata “Compacta” Plants

2019 ◽  
Vol 11 (10) ◽  
pp. 2867 ◽  
Author(s):  
Pedro García-Caparrós ◽  
Eva Almansa ◽  
Rosa Chica ◽  
María Lao
Keyword(s):  
Mineral Composition ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Plant Biomass ◽  
Soluble Sugars ◽  
Dry Weight ◽  
Spectral Energy ◽  
Photosynthetic Parameters ◽  
Light Sources ◽  
Light Emitting

Specific wavebands may allow precise control of plant growth. However, light sources must be carefully evaluated before the large-scale use of supplemental light sources can be implemented. Dieffenbachia maculata “Compacta” plants were grown for 8 weeks in pots in a growth chamber under tightly controlled temperature and humidity in order to assess the effects of supplemental light. Three treatments were applied: (i) using 18-W fluorescent bulbs (T1), (ii) using the same bulbs with supplemental light emitting diodes (LEDs) (Pure Blue and Pure Red Mix-Light-Emitting Diodes (BR-LEDs)) (T2), and (iii) using high-efficiency TL5 fluorescents (T3). Plant biomass, mineral composition, and physiological and photosynthetic parameters were assessed under each light treatment. Total plant dry weight was highest in plants grown under treatments T1 and T3. Other differences were observed between different light treatments, including variation in biomass partitioning as well as N and K concentrations in roots, stems, and leaves. Further, proline and indole 3-acetic acid (IAA) levels were higher in plants grown under the T1 treatment, whereas total soluble sugars and starch were higher in plants grown under treatment T3. Plants grown under treatment T1 had the lowest chlorophyll concentrations. No differences were observed in organ water content and P concentration. T2 was not the best treatment, as expected. The model proposed a linear regression between integrated use of spectral energy (IUSE) and total dry weight (TDW), which showed a good relationship with an R2 value of 0.83. Therefore, we recommend this methodology to discern the effects of the different spectral qualities on plant biomass.

scholarly journals Optimal LED Wavelength Composition for the Production of High-Quality Watermelon and Interspecific Squash Seedlings Used for Grafting

Agronomy ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 870 ◽  
Author(s):  
Filippos Bantis ◽  
Athanasios Koukounaras ◽  
Anastasios S. Siomos ◽  
Kalliopi Radoglou ◽  
Christodoulos Dangitsis
Keyword(s):  
Blue Emission ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Stem Diameter ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
High Quality ◽  
Light Emitting ◽  
Shoot Dry Weight

Watermelon is cultivated worldwide and is mainly grafted onto interspecific squash rootstocks. Light-emitting diodes (LEDs) can be implemented as light sources during indoor production of both species and their spectral quality is of great importance. The objective of the present study was to determine the optimal emission of LEDs with wide wavelength for the production of watermelon and interspecific squash seedlings in a growth chamber. Conditions were set at 22/20 °C temperature (day/night), 16 h photoperiod, and 85 ± 5 μmol m−2 s−1 photosynthetic photon flux density. Illumination was provided by fluorescent (FL, T0) lamps or four LEDs (T1, T2, T3, and T4) emitting varying wide spectra. Watermelon seedlings had greater shoot length, stem diameter, cotyledon area, shoot dry weight-to-length (DW/L) ratio, and Dickson’s quality index (DQI) under T1 and T3, while leaf area and shoot dry weight (DW) had higher values under T1. Interspecific squash seedlings had greater stem diameter, and shoot and root DW under T1 and T3, while leaf and cotyledon areas were favored under T1. In both species, T0 showed inferior development. It could be concluded that a light source with high red emission, relatively low blue emission, and a red:far-red ratio of about 3 units seems ideal for the production of high-quality watermelon (scion) and interspecific squash (rootstock) seedlings.

In vitro culture of Chrysanthemum plantlets using light-emitting diodes

2008 ◽  
Vol 3 (2) ◽  
pp. 161-167 ◽  
Author(s):  
Anželika Kurilčik ◽  
Renata Miklušytė-Čanova ◽  
Stasė Dapkūnienė ◽  
Silva Žilinskaitė ◽  
Genadij Kurilčik ◽  
...  
Keyword(s):  
Light Emitting Diodes ◽  
Spectral Component ◽  
Dry Weight ◽  
Chrysanthemum Morifolium ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Shoot Height ◽  
Light Emitting ◽  
Blue Component

AbstractEffects of illumination spectrum on the morphogenesis of chrysanthemum plantlets (Chrysanthemum morifolium Ramat. ‘Ellen’) grown in vitro were studied using an illumination system consisting of four groups of light-emitting diodes (LEDs) in the following spectral regions: blue (450nm), red (640nm), red (660nm), and far-red (735nm). Taking into account all differences in shoot height, root length, and fresh and dry weight (FW and DW, respectively), observed while changing the total photon flux density (PFD), the optimal total PFD for growth of chrysanthemum plantlets in vitro was estimated. For 16 h photoperiod and typical fractions of the spectral components (14%, 50%, 28%, and 8%, respectively), the optimal total PFD was found to be 40 µmol m−2 s−1. Our study shows that the blue component in the illumination spectrum inhibits the plantlet extension and formation of roots and simultaneously increases the DW to FW ratio and content of photosynthetic pigments. We demonstrate photomorphogenetic effects in the blue region and its interaction with the fractional PFD of the far-red spectral component. Under constant fractional PFD of the blue component, the root number, length of roots and stems, and fresh weight of the plantlets have a correlated nonmonotonous dependence on the fractional PFD of the far-red component.

scholarly journals Intensity of Sole-source Light-emitting Diodes Affects Growth, Yield, and Quality of Brassicaceae Microgreens

HortScience ◽  
2019 ◽  
Vol 54 (7) ◽  
pp. 1168-1174 ◽  
Author(s):  
Chase Jones-Baumgardt ◽  
David Llewellyn ◽  
Qinglu Ying ◽  
Youbin Zheng
Keyword(s):  
Light Emitting Diodes ◽  
Flux Ratio ◽  
Growth Yield ◽  
Sole Source ◽  
Leafy Vegetables ◽  
Photon Flux ◽  
Light Emitting ◽  
Yield And Quality ◽  
Lighting Environment

Indoor farming is an increasingly popular approach for growing leafy vegetables, and under this production system, artificial light provides the sole source (SS) of radiation for photosynthesis and light signaling. With newer horticultural light-emitting diodes (LEDs), growers have the ability to manipulate the lighting environment to achieve specific production goals. However, there is limited research on LED lighting specific to microgreen production, and available research shows that there is variability in how microgreens respond to their lighting environment. The present study examined the effects of SS light intensity (LI) on growth, yield, and quality of kale (Brassica napus L. ‘Red Russian’), cabbage (Brassica oleracea L.), arugula (Eruca sativa L.), and mustard (Brassica juncea L. ‘Ruby Streaks’) microgreens grown in a walk-in growth chamber. SS LEDs were used to provide six target photosynthetic photon flux density density (PPFD) treatments: 100, 200, 300, 400, 500, and 600 μmol·m−2·s−1 with a photon flux ratio of 15 blue: 85 red and a 16-hour photoperiod. As LI increased from 100 to 600 μmol·m−2· s−1, fresh weight (FW) increased by 0.59 kg·m−2 (36%), 0.70 kg·m−2 (56%), 0.71 kg·m−2 (76%), and 0.67 kg·m−2 (82%) for kale, cabbage, arugula, and mustard, respectively. Similarly, dry weight (DW) increased by 47 g·m−2 (65%), 45 g·m−2 (69%), 64 g·m−2 (122%), and 65 g·m−2 (145%) for kale, cabbage, arugula, and mustard, respectively, as LI increased from 100 to 600 μmol·m−2· s−1. Increasing LI decreased hypocotyl length and hue angle linearly in all genotypes. Saturation of cabbage and mustard decreased linearly by 18% and 36%, respectively, as LI increased from 100 to 600 μmol·m−2·s−1. Growers can use the results of this study to optimize SS LI for their production systems, genotypes, and production goals.

scholarly journals Effects of Red light on the Growth of Zantedeschia Plantlets in vitro and Tuber Formation Using Light-emitting Diodes

HortScience ◽  
2005 ◽  
Vol 40 (2) ◽  
pp. 436-438 ◽  
Author(s):  
Ruey-Chi Jao ◽  
Chien-Chou Lai ◽  
Wei Fang ◽  
Sen-Fuh Chang
Keyword(s):  
Chlorophyll Content ◽  
Plant Height ◽  
Blue Light ◽  
Light Emitting Diodes ◽  
Dry Weight ◽  
Tuber Formation ◽  
Photon Flux ◽  
Light Emitting ◽  
Red Leds

Effects of light generated by red and blue light-emitting diodes on the photomixotrophic growth of Zantedeschia jucunda `Black Magic' plantlets in vitro and tuber formation after transplant under the same PPF and photoperiod were investigated. All five treatments had the same photosynthetic photon flux (PPF, 80 ± 5 μmol·m-2·s-1) and photoperiod (16 hours daytime/8 hours nighttime), leading to the same daily light integral. Results showed that the tubular fluorescent lamp (TFL) treatment had the highest value on chlorophyll content and dry weight accumulation than other treatments using light-emitting diodes (LEDs). In LED treatments, there were no significant differences on dry weight and growth rate but with significant differences on chlorophyll content and plant height when blue light LEDs were added. It revealed that blue light was involved in plant height and chlorophyll development control mechanism. Results also showed that minor difference in 28 days of transplant production (in vitro) among treatments does not extends after 6 months of tuber formation stage grown in greenhouse. At present, blue LEDs cost much more than that of red LEDs, results of this study suggested that using red LEDs alone and powered with AC is feasible for the commercial production of Zantedeschia plantlets in vitro.

scholarly journals Light Intensity and Light Quality from Sole-source Light-emitting Diodes Impact Phytochemical Concentrations within Brassica Microgreens

2017 ◽  
Vol 142 (1) ◽  
pp. 3-12 ◽  
Author(s):  
Joshua K. Craver ◽  
Joshua R. Gerovac ◽  
Roberto G. Lopez ◽  
Dean A. Kopsell
Keyword(s):  
Light Intensity ◽  
Light Quality ◽  
Light Emitting Diodes ◽  
Sole Source ◽  
Photon Flux ◽  
Total Phenolic ◽  
Light Emitting ◽  
Phytochemical Content ◽  
Light Intensities ◽  
Phenolic Concentration

Multilayer vertical production systems using sole-source (SS) light-emitting diodes (LEDs) can be an alternative to more traditional methods of microgreens production. One significant benefit of using LEDs is the ability to select light qualities that have beneficial impacts on plant morphology and the synthesis of health-promoting phytochemicals. Therefore, the objective of this study was to quantify the impacts of SS LEDs of different light qualities and intensities on the phytochemical content of brassica (Brassica sp.) microgreens. Specifically, phytochemical measurements included 1) total anthocyanins, 2) total and individual carotenoids, 3) total and individual chlorophylls, and 4) total phenolics. Kohlrabi (Brassica oleracea var. gongylodes), mustard (Brassica juncea ‘Garnet Giant’), and mizuna (Brassica rapa var. japonica) were grown in hydroponic tray systems placed on multilayer shelves in a walk-in growth chamber. A daily light integral (DLI) of 6, 12, or 18 mol·m−2·d−1 was achieved from SS LED arrays with light ratios (percent) of red:blue 87:13 (R87:B13), red:far-red:blue 84:7:9 (R84:FR7:B9), or red:green:blue 74:18:8 (R74:G18:B8) with a total photon flux from 400 to 800 nm of 105, 210, or 315 µmol·m−2·s–1 for 16 hours, respectively. Phytochemical measurements were collected using spectrophotometry and high-performance liquid chromatography (HPLC). Regardless of light quality, total carotenoids were significantly lower under increasing light intensities for mizuna and mustard microgreens. In addition, light quality affected total integrated chlorophyll with higher values observed under the light ratio of R87:B13 compared with R84:FR7:B9 and R74:G18:B8 for kohlrabi and mustard microgreens, respectively. For kohlrabi, with increasing light intensities, the total concentration of anthocyanins was greater compared with those grown under lower light intensities. In addition, for kohlrabi, the light ratios of R87:B13 or R84:FR7:B9 produced significantly higher anthocyanin concentrations compared with the light ratio of R74:G18:B8 under a light intensity of 315 µmol·m−2·s−1. Light quality also influenced the total phenolic concentration of kohlrabi microgreens, with significantly greater levels for the light ratio of R84:FR7:B9 compared with R74:G18:B8 under a light intensity of 105 µmol·m−2·s−1. However, the impact of light intensity on total phenolic concentration of kohlrabi was not significant. The results from this study provide further insight into the selection of light qualities and intensities using SS LEDs to achieve preferred phytochemical content of brassica microgreens.

scholarly journals Supplemental Far-red Light-emitting Diode Light Increases Growth of Foxglove Seedlings Under Sole-source Lighting

2020 ◽  
Vol 30 (5) ◽  
pp. 564-569
Author(s):  
Claudia Elkins ◽  
Marc W. van Iersel
Keyword(s):  
Flux Density ◽  
Plant Height ◽  
Light Emitting Diode ◽  
Red Light ◽  
Dry Weight ◽  
Sole Source ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Emitting ◽  
Light Intensities

Seedlings may be grown indoors where environmental conditions can be precisely controlled to ensure consistent and reliable production. The optimal spectrum for production under sole-source lighting is currently unknown. Far-red light (λ = 700–800 nm) typically is not a significant part of the spectrum of light-emitting diode (LED) grow lights. However, far-red light is photosynthetically active and can enhance leaf elongation, which may result in larger leaves and increased light interception. We hypothesized that adding far-red light to sole-source lighting would increase the growth of ‘Dalmatian Peach’ foxglove (Digitalis purpurea) seedlings grown under white LED lights, potentially shortening production times. Our objective was to evaluate the effect of far-red light intensities, ranging from 4.0 to 68.8 µmol·m−2·s−1, on the growth and morphology of foxglove seedlings. Foxglove seedlings were grown in a growth chamber with a photosynthetic photon flux density (PPFD) of 186 ± 6.4 μmol·m−2·s−1 and supplemental far-red light intensities ranging from 4.0 to 68.8 µmol·m−2·s−1. As far-red light increased, shoot dry weight, root dry weight, plant height, and plant height/number of leaves increased by 38% (P = 0.004), 20% (P = 0.029), 38% (P = 0.025), and 34% (P = 0.024), respectively, while root weight fraction decreased 16% (P = 0.034). Although we expected supplemental far-red light to induce leaf and/or stem expansion, specific leaf area and compactness (two measures of morphology) were unaffected. Because a 37% increase in total photon flux density (PPFD plus far-red light) resulted in a 34.5% increase in total plant dry weight, the increased growth likely was due to increased photosynthesis rather than a shade-acclimation response. The growth response was linear across the 4.0 to 68.8 µmol·m−2·s−1 range of far-fed light tested, so we were unable to determine a saturating far-red photon flux density.

scholarly journals Cuttings of Impatiens, Pelargonium, and Petunia Propagated under Light-emitting Diodes and High-pressure Sodium Lamps Have Comparable Growth, Morphology, Gas Exchange, and Post-transplant Performance

HortScience ◽  
2013 ◽  
Vol 48 (4) ◽  
pp. 428-434 ◽  
Author(s):  
Christopher J. Currey ◽  
Roberto G. Lopez
Keyword(s):  
High Pressure ◽  
Gas Exchange ◽  
Light Emitting Diodes ◽  
Dry Mass ◽  
Stem Length ◽  
Light Sources ◽  
Growth Morphology ◽  
Light Emitting ◽  
Supplemental Lighting ◽  
The Impact

Increasing photosynthetic daily light integral (DLI) by supplementing with high-pressure sodium (HPS) lamps during propagation has been shown to enhance photosynthesis and biomass accumulation of cuttings. The development of high-intensity light-emitting diodes (LEDs) is a promising technology with potential as a greenhouse supplemental lighting source. Our objective was to quantify the impact of narrow spectra supplemental lighting from LEDs on growth, morphology, and gas exchange of cuttings compared with traditional HPS supplemental lighting. Cuttings of Impatiens hawkeri W. Bull ‘Celebrette Frost’, Pelargonium ×hortorum L.H. Bailey ‘Designer Bright Red’, and Petunia ×hybrida Vilm. ‘Suncatcher Midnight Blue’ were received from a commercial propagator and propagated in a glass-glazed greenhouse at 23 °C air and substrate temperature set points. After callusing (≈5 mol·m−2·d−1 for 7 days), cuttings were placed under 70 μmol·m−2·s−1 delivered from HPS lamps or LED arrays with varying proportions (%) of red:blue light (100:0, 85:15, or 70:30). After 14 days under supplemental lighting treatments, growth, morphology, and gas exchange of rooted cuttings were measured. There were no significant differences among Impatiens and Pelargonium cuttings grown under different supplemental light sources. However, compared with cuttings propagated under HPS lamps, stem length of Petunia cuttings grown under 100:0 red:blue LEDs was 11% shorter, whereas leaf dry mass, root dry mass, root mass ratios, and root:shoot ratio of cuttings grown under 70:30 red:blue LEDs were 15%, 36%, 17%, and 24% higher, respectively. Supplemental light source had minimal impact on plants after transplant. Our data suggest that LEDs are suitable replacements for HPS lamps as supplemental light sources during cutting propagation.

Sign in / Sign up

Export Citation Format

Share Document