scholarly journals Bayesian Assessment of the Effects of Cyclic Loads on the Chloride Ingress Process into Reinforced Concrete

2020 ◽  
Vol 10 (6) ◽  
pp. 2040 ◽  
Author(s):  
Henriette Marlaine Imounga ◽  
Emilio Bastidas-Arteaga ◽  
Rostand Moutou Pitti ◽  
Serge Ekomy Ango ◽  
Xiao-Hui Wang
Keyword(s):  
Experimental Data ◽  
Reinforced Concrete ◽  
Bayesian Networks ◽  
Chloride Ion ◽  
Chloride Ions ◽  
Chloride Diffusion ◽  
Chloride Ingress ◽  
Rc Structures ◽  
Corrosion Initiation ◽  
Static And Cyclic Loading

Chloride-induced corrosion and load induced concrete cracking affect the serviceability and safety of reinforced concrete (RC) structures. Once these phenomena occur simultaneously, the prediction of RC structures’ lifetimes becomes a major challenge. The objective of this paper is to propose a methodology to evaluate the effect of loading and cracking on the mechanism of chloride ion penetration in concrete. The proposed methodology will be based on Bayesian networks. Bayesian networks are useful to update the lifetime assessment based on experimental data as well as to characterize the uncertainties of the input parameters of a chlorination model including a chloride diffusion acceleration factor. The proposed methodology is illustrated with experimental data coming from tests on RC beams subjected to static and cyclic loading before being in contact with a solution containing chloride ions. The characterized parameters are then used to evaluate the effect of these two loading conditions (static and cyclic) on the corrosion initiation time and the corrosion initiation probability. The results obtained indicate that the proposed methodology is capable of integrating loading and chlorination test data for the determination of the probabilistic parameters of a model in a comprehensive way.

scholarly journals Combined Effect of Initial Curing Temperature and Crack Width on Chloride Penetration in Reinforced Concrete Beams

2018 ◽  
Vol 142 ◽  
pp. 02003
Author(s):  
Lotfi Elkedrouci ◽  
Bo Diao ◽  
Sen Pang ◽  
Yi Li
Keyword(s):  
Reinforced Concrete ◽  
Crack Width ◽  
Chloride Ion ◽  
Chloride Content ◽  
Chloride Penetration ◽  
Reinforced Concrete Beams ◽  
Curing Temperature ◽  
Chloride Diffusion ◽  
Rc Structures ◽  
Cover Cracking

Reinforced concrete (RC) structures are gradually being degraded all over the world, largely due to corrosion of the embedded steel bars caused by an attack of chloride penetration. Initial curing would be regarded as one factor influencing chloride diffusion in concrete in combination with cover cracking that is also of great attention for reinforced structures. In this study, a non-steady state diffusion test of chloride ion involving RC beam specimens with a water-to-cement ratio of 0.5, initial curing temperatures of 5°C or 20°C and three types of crack widths ranging from 0 to 0.2mm was performed. Chloride content at 5°C or was determined. The results show that the higher chloride content was obtained in condition of crack width large than 0.1mm with low initial curing temperature and there are no obvious differences in chloride content when the crack width was not larger than 0.1mm.

scholarly journals Chloride-Induced Corrosion of Steel in Concrete: An Overview on Chloride Diffusion and Prediction of Corrosion Initiation Time

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Muhammad Umar Khan ◽  
Shamsad Ahmad ◽  
Husain Jubran Al-Gahtani
Keyword(s):  
Diffusion Models ◽  
Chloride Diffusion ◽  
Second Law ◽  
Chloride Ingress ◽  
Initiation Time ◽  
Chloride Binding ◽  
Rc Structures ◽  
Corrosion Initiation ◽  
Corrosion Initiation Time ◽  
Corrosion Of Steel

Initiation of corrosion of steel in reinforced concrete (RC) structures subjected to chloride exposures mainly depends on coefficient of chloride diffusion, Dc, of concrete. Therefore, Dc is one of the key parameters needed for prediction of initiation of reinforcement corrosion. Fick’s second law of diffusion has been used for long time to derive the models for chloride diffusion in concrete. However, such models do not include the effects of various significant factors such as chloride binding by the cement, multidirectional ingress of chloride, and variation of Dc with time due to change in the microstructure of concrete during early period of cement hydration. In this paper, a review is presented on the development of chloride diffusion models by incorporating the effects of the key factors into basic Fick’s second law of diffusion. Determination of corrosion initiation time using chloride diffusion models is also explained. The information presented in this paper would be useful for accurate prediction of corrosion initiation time of RC structures subjected to chloride exposure, considering the effects of chloride binding, effect of time and space on Dc, and interaction effect of multidirectional chloride ingress.

Diffusivity Resistance of Concrete Systems in Chloride Rich Environment for Corrosion Protection of Embedded Steel Bars

2013 ◽  
Vol 831 ◽  
pp. 3-8
Author(s):  
Suad Khalid Al-Bahar ◽  
Safaa M. Abdul Salam ◽  
Adel M. Husain
Keyword(s):  
Service Life ◽  
Concrete Structures ◽  
Chloride Ion ◽  
Chloride Ions ◽  
Steel Reinforcement ◽  
Mineral Admixtures ◽  
Chloride Ingress ◽  
Corrosion Initiation ◽  
Chloride Ion Penetration ◽  
Ion Penetration

Improving concrete performance and minimizing corrosion-induced deterioration of reinforced concrete structures are mandated Building Codes Practices and Specifications in arid regions such as the Arabian Gulf. Concrete structures resist corrosion due to the passivating properties of the hydrated cement around the steel reinforcement created by the high alkaline environment within the composite structure (pH > 12). However, the presence of chloride ions in the pore structure of the concrete destroys this passivating layer, which makes the steel reinforcement vulnerable to chloride-induced corrosion attack that accelerates degradation and deterioration of concrete structures. Corrosion activities-related tests such as Time-to-Corrosion Initiation (Modified ASTM G-109)6, and Corrosion Rate Test (Lollipop Test), can be effectively used to monitor the behavior of corrosion development, while chloride ingress characteristics tests such as Electrical Indication of Concretes Ability to Resist Chloride Ion Penetration ASTM C-1202-91)7, and the Resistance of Concrete to Chloride Ion Penetration (AASHTO T 259-80)8, are applied to evaluate the rate at which chloride ions can diffuse through concrete to onset the time-to-corrosion initiation, which will impact the structure service life and compromise its sustainability. Efforts have been made by scientists to develop mathematical simulation models that predict the service life of the structure based on Ficks Second Law for semi-finite diffusion of chloride ions, concentrated at different concrete depths. The study concluded that mineral admixtures have contributed to the enhancement of concrete performance and its resistance to chloride diffusivity, as well when in combination with corrosion-inhibiting admixture such as calcium nitrite.

scholarly journals Experimental and Simulation Study on Diffusion Behavior of Chloride Ion in Cracking Concrete and Reinforcement Corrosion

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Yongchun Cheng ◽  
Yuwei Zhang ◽  
Chunli Wu ◽  
Yubo Jiao
Keyword(s):  
Finite Element ◽  
Prediction Models ◽  
Chloride Concentration ◽  
Chloride Ion ◽  
Corrosion Current ◽  
Chloride Diffusion ◽  
Finite Element Models ◽  
Rc Structures ◽  
Cracked Concrete ◽  
Chloride Migration

A chloride ion is a key factor affecting durability of reinforced concrete (RC) structures. In order to investigate chloride migration in cracked concrete, considering the mesoscopic heterogeneity of concrete, concrete modeled here is treated as a four-phase composite consisting aggregate, mortar, crack, and interfacial transition zone (ITZ). In this paper, two-dimensional finite element models of cracked concrete with different crack widths and crack quantity are established and the control parameters are determined based on the nonsteady-state chloride migration (NSSCM) test. In addition, based on the concrete finite element models, influences of crack width, crack quantity, and erosion time on chloride migration behaviors and characteristics are studied. Furthermore, a prediction model of chloride concentration on the simulated surface of a rebar in concrete influenced by different crack states is established. This model is used to derive the corrosion current density and corrosion depth prediction models of a rebar in this paper, which can be used by engineers to estimate the migration behaviors of chloride and rebar corrosion degree in RC structures in a short time and evaluate the duration of RC structures after knowing the status of cracks and chloride diffusion sources.

Damage of Reinforced Concrete Structures due to Steel Corrosion

2015 ◽  
Vol 1111 ◽  
pp. 187-192
Author(s):  
Corina Sosdean ◽  
Liviu Marsavina ◽  
Geert de Schutter
Keyword(s):  
Reinforced Concrete ◽  
Building Materials ◽  
Structural Integrity ◽  
Colorimetric Method ◽  
Concrete Structures ◽  
Steel Corrosion ◽  
Degradation Process ◽  
Reinforced Concrete Structures ◽  
Chloride Ingress ◽  
Rc Structures

Reinforced concrete (RC) became one of the most widely used modern building materials. In the last decades a great interest has been shown in studying reinforcement corrosion as it became one of the main factors of degradation and loss of structural integrity of RC structures. The degradation process is accelerated in the case of RC structures situated in aggressive environments like marine environments or subjected to de-icing salts. In this paper it is shown how steel corrosion of the embedded rebars occurs and how this affects the service life of reinforced concrete structures. Also, an experimental study regarding the combined effect of carbonation and chloride ingress was realized. Samples with and without rebars were drilled from a RC slab which was stored in the laboratory for two years. Non-steady state migration tests were realized in order to determine the chloride profile, while the carbonation depth was measured using the colorimetric method based on phenolphthalein spraying. It was concluded that carbonation has a significant effect on chloride ingress, increasing it.

scholarly journals Effect of Fly Ash as Cement Replacement on Chloride Diffusion, Chloride Binding Capacity, and Micro-Properties of Concrete in a Water Soaking Environment

2020 ◽  
Vol 10 (18) ◽  
pp. 6271 ◽  
Author(s):  
Jun Liu ◽  
Jiaying Liu ◽  
Zhenyu Huang ◽  
Jihua Zhu ◽  
Wei Liu ◽  
...  
Keyword(s):  
Diffusion Coefficient ◽  
Fly Ash ◽  
Binding Capacity ◽  
Chloride Ion ◽  
Chloride Content ◽  
Chloride Ions ◽  
Chloride Diffusion ◽  
Chloride Binding ◽  
Test Results ◽  
New Equation

This paper experimentally studies the effects of fly ash on the diffusion, bonding, and micro-properties of chloride penetration in concrete in a water soaking environment based on the natural diffusion law. Different fly ash replacement ratio of cement in normal concrete was investigated. The effect of fly ash on chloride transportation, diffusion, coefficient, free chloride content, and binding chloride content were quantified, and the concrete porosity and microstructure were also reported through mercury intrusion perimetry and scanning electron microscopy, respectively. It was concluded from the test results that fly ash particles and hydration products (filling and pozzolanic effects) led to the densification of microstructures in concrete. The addition of fly ash greatly reduced the deposition of chloride ions. The chloride ion diffusion coefficient considerably decreased with increasing fly ash replacement, and fly ash benefits the binding of chloride in concrete. Additionally, a new equation is proposed to predict chloride binding capacity based on the test results.

scholarly journals Investigation on Durability Performance in Early Aged High-Performance Concrete Containing GGBFS and FA

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Seung-Yup Jang ◽  
Subbiah Karthick ◽  
Seung-Jun Kwon
Keyword(s):  
Diffusion Coefficient ◽  
High Performance ◽  
High Performance Concrete ◽  
Steel Corrosion ◽  
Chloride Ions ◽  
Chloride Diffusion ◽  
Structural Safety ◽  
Concrete Durability ◽  
Chloride Diffusion Coefficient ◽  
Rc Structures

The significance of concrete durability increases since RC (Reinforced Concrete) structures undergo degradation due to aggressive environmental conditions, which affects structural safety and serviceability. Steel corrosion is the major cause for the unexpected failure of RC structures. The main cause for the corrosion initiation is the ingress of chloride ions prevailing in the environment. Hence quantitative evaluation of chloride diffusion becomes very important to obtain a chloride diffusion coefficient and resistance to chloride ion intrusion. In the present investigation, 15 mix proportions with 3 water-to-binder ratios (0.37, 0.42, and 0.47) and 3 replacement ratios (0, 30, and 50%) were prepared for HPC (high-performance concrete) with fly-ash and ground granulated blast furnace slag. Chloride diffusion coefficient was measured under nonstationary condition. In order to evaluate the microstructure characteristics, porosity through MIP was also measured. The results of compressive strength, chloride diffusion, and porosity are compared with electrical charges. This paper deals with the results of the concrete samples exposed for only 2 months, but it is a part of the total test plan for 100 years. From the work, time-dependent diffusion coefficients in HPC and the key parameters for durability design are proposed.

Design and Impermeability of High Durability Reinforced Concrete Segment

2012 ◽  
Vol 174-177 ◽  
pp. 1199-1203
Author(s):  
Xin'gang Wang ◽  
Fang Bin Chen ◽  
Xu Na Ye ◽  
Wei Qin Zhang
Keyword(s):  
Diffusion Coefficient ◽  
Reinforced Concrete ◽  
Water Pressure ◽  
Chloride Ion ◽  
Concrete Cover ◽  
Chloride Diffusion ◽  
Shield Tunnel ◽  
Main Body ◽  
Chloride Diffusion Coefficient ◽  
High Durability

Reinforced concrete segment is the main body of structure in shield tunnel, and its durability has an important effect on shield tunnel. The durability of High Durability Reinforced Concrete Segment (abbr. HDRC Segment) was investigated by impermeability of single segment and chloride diffusion coefficient of core-drilling. HDRC Segment had high compact cover, concrete cover and high strength structural-layer. Permeable height of HDRC Segment was approximately 0.5 mm when Keeping 4 hours in the constant water pressure of 0.8 MPa, and chloride diffusion coefficient of HDRC Segment was only 4.9×10－13m2/s by NEL method. As for Water impermeability and chloride ion penetration resistance, HDRC Segment is far superior to those of conventional Reinforced Concrete Segment (abbr. conventional RC Segment). It is advantageous to increase durability of HDRC Segment and service life of tunnel engineering.

An Experimental Corrosion Investigation of Coupling Chloride Ions with Stray Current for Reinforced Concrete

2012 ◽  
Vol 166-169 ◽  
pp. 1987-1993 ◽  
Author(s):  
Mengcheng Chen ◽  
Kai Wang ◽  
Quanshui Wu ◽  
Zhen Qin
Keyword(s):  
Reinforced Concrete ◽  
Chloride Ion ◽  
Current Strength ◽  
Chloride Ions ◽  
Ion Concentration ◽  
Test Time ◽  
Light Rail ◽  
Stray Current ◽  
Concrete Deterioration ◽  
Two Stages

According to the service environment of light rail transit and subway structures, in this paper experiments on the corrosion characteristics of reinforced concrete under single corrosion environment of stray current, single corrosion environment of chloride ions and joint corrosion environment of stray current and chloride ions were respectively carried out. Loading direct current electric field was used to simulate the stray current. The experimental results showed that, the corrosion growth process of the rebar in reinforced concrete under single environment of chloride ions was slow and stable, while that under single environment of stray current being separated two stages, i.e., rapidly increasing stage and stably varying stage. In addition, the rebar of reinforced concrete in stray current alone environment was corroded faster than that in chloride ion alone environment did; when stray current and chloride ion coexist, the stray current speeded up the chloride ion transportation, which gave rise to the increase of the corrosion rate of the rebar of reinforced concrete; the corrosion degree of the rebar depended on the chloride ion concentration, stray current strength and test time. The stronger the stray current strength, the longer the stray current corrosion period and the heavier the chloride ion concentration, the more the corrosion products of the rebar and thus the more serious the reinforced concrete deterioration.

Transport of Water and Chloride Ion in Cement Composites Modified with Graphene Nanoplatelet

2014 ◽  
Vol 629-630 ◽  
pp. 162-167 ◽  
Author(s):  
Hong Jian Du ◽  
Sze Dai Pang
Keyword(s):  
Chloride Ion ◽  
Chloride Ions ◽  
Chloride Diffusion ◽  
Cement Composites ◽  
Chloride Diffusion Coefficient ◽  
Barrier Effect ◽  
Graphene Nanoplatelet ◽  
Chloride Migration ◽  
Corrosion Of Steel ◽  
And Diffusion

Cement composites are vulnerable to harsh environments in which the chloride ions can ingress into concrete and thus cause corrosion of steel. In this study, the barrier effect of adding 2-D nanoparticles on the transport properties of cement-based materials was investigated. Graphene nanoplatelet (GNP), which comprises of a few layers of graphene stacked together, is chosen as a candidate in this study due to its impermeability and also its electrical conductivity which can be exploited for self-sensing functionality. Due to the large aspect ratio of the GNP, it is expected that the dispersion of these 2-D nanobarriers can contribute to the reduced permeability and diffusion of harmful agents. Experiments were carried out on cement mortar with 0%, 2.5%, 5.0% and 7.5% of GNP by weight of cement. The water penetration depth, chloride diffusion coefficient and chloride migration coefficient were reduced by 64%, 70% and 31% respectively with the addition of as little as 2.5% of GNP. This reduction can be attributed to the barrier effect of GNP which increases the tortuosity against water and chloride ions penetration, and also the refinement of the capillary pores which was revealed from the MIP tests. At GNP content exceeding 5%, the nanoparticles agglomerate, causing weak pockets which compromises the benefits of adding GNP to impede the ingress of fluids.

Sign in / Sign up

Export Citation Format

Share Document