scholarly journals Smart Power Electronics–Based Solutions to Interface Solar-Photovoltaics (PV), Smart Grid, and Electrified Transportation: State-of-the-Art and Future Prospects

2020 ◽  
Vol 10 (14) ◽  
pp. 4988
Author(s):  
Sandra Aragon-Aviles ◽  
Ashutosh Trivedi ◽  
Sheldon S. Williamson

The need to reduce the use of fossil fuels and greenhouse gas (GHG) emissions produced by the transport sector has generated a clear increasing trend in transportation electrification and the future of energy and mobility. This paper reviews the current research trends and future work for power electronics-based solutions that support the integration of photovoltaic (PV) energy sources and smart grid with charging systems for electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEV). A compressive overview of isolated and non-isolated DC–DC converters and AC–DC converter topologies used to interface the PV-grid charging facilities is presented. Furthermore, this paper reviews the modes of operation of the system currently used. Finally, this paper explores the future roadmap of research for power electronics solutions related to photovoltaic (PV) systems, smart grid, and transportation electrification.

2020 ◽  
Author(s):  
Markus Millinger ◽  
Philip Tafarte ◽  
Matthias Jordan ◽  
Alena Hahn ◽  
Kathleen Meisel ◽  
...  

<p>The increase of variable renewable energy sources (VRE), i.e. wind and solar power, may lead to a certain mismatch between power demand and supply. At the same time, in order to decarbonise the heat and transport sectors, power-based solutions are often seen as promising option, through so-called sector coupling. At times when VRE power supply exceeds demand, the surplus power could be used for producing liquid and gaseous electrofuels. The power is used for electrolysis, producing hydrogen, which can in turn be used either directly or combined with a carbon source to produce hydrocarbon fuels.</p><p>Here, we analyse the potential development of surplus power for the case of Germany, at an ambitious VRE expansion until 2050 and perform a cost analysis of electrofuels at different production levels using sorted residual load curves. These are then compared to biofuels and electric vehicles with the aid of an optimisation model, considering both cost- and greenhouse gas (GHG)-optimal options for the main transport sectors in Germany.</p><p>We find that, although hydrocarbon electrofuels are more expensive than their main renewable competitors, i.e. biofuels, they are most likely indispensable in addition for reaching climate targets in transport. However, the electrofuel potential is constrained by the availability of both surplus power and carbon. In fact, the surplus power potential is projected to remain limited even at currently ambitious VRE targets for Germany and carbon availability is lower in an increasingly renewable energy system unless direct air capture is deployed. In addition, as the power mix is likely to contain fossil fuels for decades to come, electrofuels based on power directly from the mix with associated conversion losses would cause higher GHG-emissions than the fossil transport fuel reference until a very high share of renewables in the power source is achieved. In contrast, electric vehicles are a more climate competitive option under the projected power mix with remaining fossil fuel fractions, due to a superior fuel economy and thereby lower costs and emissions.</p><p>As part of the assessment, we quantify the greenhouse gas abatement costs for different well-to-wheel pathways and provide an analysis and recommendations for a transition to sustainable transport.</p>


2017 ◽  
Vol 47 (7) ◽  
Author(s):  
Romilton Oliveira Magalhães ◽  
Mateus Vieira da Assunção ◽  
João Paulo Mendes Santos ◽  
Emanuel Victor da Silva ◽  
Luiz de Gonzaga Ferreira Júnior ◽  
...  

ABSTRACT: This paper presents the main applications of electric vehicles in rural areas, pointing out the trends and challenges for the future. Technological conditions and difficulties faced by the industry for a wide dissemination of this technology are discussed. The paper described the main researches with proposals to overcome the problems of implementing electric tractors, as supply and electricity storage. Technical and economic comparisons between conventional internal combustion tractors and electric tractors are also presented and discussed. The paper showed the existence of barriers to the implementation of electric vehicles in rural areas, as well as the need for batteries technological evolution, which have high costs and for that reason they are very heavy for these purposes, but there are already systems that can be applied to minimize dependence of fossil fuels in this sector and increase the use of sustainable energy.


2021 ◽  
Vol 13 (21) ◽  
pp. 12177
Author(s):  
Haider Ali Abbasi ◽  
Satirenjit Kaur Johl ◽  
Zullina Bt Hussain Shaari ◽  
Wajiha Moughal ◽  
Muhammad Mazhar ◽  
...  

The transport sector is the leading source of growing greenhouse gas (GHG) emissions globally. To consider environmental degradation aspects due to transport, electric vehicles (EVs) have the prospect to lead road transport to electric mobility from conventional petroleum vehicles. Despite various eco-friendly benefits, the EV market penetration ratio is very low, especially in developing countries. The primary reason for low penetration is consumer limited motivation and knowledge about the EVs features. This paper uses a unified theory of acceptance and technology (UTAUT) model to assess consumer motivation and environmental knowledge towards EVs. This research used convenience random sampling to collect data and analyzed the results using the Partial Least Squares (PLS) method on the example of 199 respondents from Malaysia. The study results revealed that factors identified in the motivational context significantly influence consumer intentions to purchase EVs. Perceived environmental knowledge and technophilia have been included in UTAUT from a motivational perspective. Furthermore, a significant relationship between effort expectancy, social influence, technophilia, perceived environmental knowledge, and purchase intention towards electric vehicles has been observed, without performance expectancy. The study findings serve to inform policymakers and automakers to formulate effective marketing strategies to enhance consumer motivation, knowledge, and value creation for EVs in a sustainable era. Ultimately, the policies will help to encourage consumers to buy eco-friendly vehicles that will help reduce transport carbon emissions and attain sustainable development goals (SDGs).


Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5765
Author(s):  
Patrick Reimers

Throughout decades, conflicts related to the access and usage of various energy sources have caused political tensions between nations and confederations of states. Thus, partially to decrease the dependence on fossil fuels, a thorough transition towards renewable energies has been promoted by several regional and national governments as well as by multinational institutions such as the European Union. In this context, the automotive industry has particularly been held responsible for the production of negative externalities, such as global greenhouse gas emissions (GHG emissions), noise and air pollution. To a notable extent, these externalities were caused by vehicles running on fossil fuels such as petroleum products, including gasoline, diesel fuel and fuel oil. Accordingly, it is often argued that replacing vehicles run by internal combustion engines (ICEs) with so-called alternative fuel vehicles (AFVs), particularly with plug-in electric vehicles (PEVs), is crucial to increase the sustainability of the transport sector. Moreover, several EU-member states aim to reduce the vehicle-related petrol and diesel demand to decrease their dependence on foreign energy sources. However, one must consider that there are important economic costs related to such a transition process. This paper evaluates the short-term and long-term effects of fiscal policies on the European automotive market in the period from 2010 to 2018, focusing on the impact of mentioned public incentives for AFVs. This public interventionism will be critically evaluated to examine the effectiveness of government incentives in promoting AFVs, particularly for plug-in electric vehicles (PEVs). The author argues that the rather positive sales evolution of AFVs was not caused by corresponding actual customer demand but mainly by governmental policies in an increasingly interventionist market. He acknowledges that the growing variety of available PEV models, the increasing driving range of electric vehicles, as well as their decreasing production costs due to economies of scale, have helped PEVs to become more competitive. However, the concern should be raised that mentioned public interventionism is unsustainable from a macroeconomic perspective, possibly leading to significant market distortion and a new artificial market bubble. The narrowed focus on battery electric vehicles prevents the market from further elaborating on other potentially more sustainable technologies. Moreover, from a geostrategic perspective, the transition of the European automotive industry towards electrification is likely to reduce the EU’s dependency on imported fossil fuels but enables several non-European automotive brands to conquer a significant market with their new competitive plug-in electric vehicle technologies.


Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3114 ◽  
Author(s):  
Jean-Michel Clairand ◽  
Paulo Guerra-Terán ◽  
Xavier Serrano-Guerrero ◽  
Mario González-Rodríguez ◽  
Guillermo Escrivá-Escrivá

The market for electric vehicles (EVs) has grown with each year, and EVs are considered to be a proper solution for the mitigation of urban pollution. So far, not much attention has been devoted to the use of EVs for public transportation, such as taxis and buses. However, a massive introduction of electric taxis (ETs) and electric buses (EBs) could generate issues in the grid. The challenges are different from those of private EVs, as their required load is much higher and the related time constraints must be considered with much more attention. These issues have begun to be studied within the last few years. This paper presents a review of the different approaches that have been proposed by various authors, to mitigate the impact of EBs and ETs on the future smart grid. Furthermore, some projects with regard to the integration of ETs and EBs around the world are presented. Some guidelines for future works are also proposed.


Author(s):  
Luka Lešnik ◽  
Breda Kegl ◽  
Eloísa Torres-Jiménez ◽  
Fernando Cruz-Peragón

The majority of on-road vehicles today are powered by internal combustion engines, which are, in most cases, burning petroleum-derived liquid fuels mixed with bio-components. The power to weight ratio of internal combustion engines combined with the high energy content of conventional fuels, which can be refilled easily in matter of minutes, makes them ideal for all kinds of road transportation. Since the introduction of EURO emissions norms, the emissions from the Transport sector in the European Union have undergone significant reduction. There are several alternatives to fossil fuels with similar properties, which can replace their usage in the Transport sector. The main focus of research in recent decades has been on biofuels, which can be produced from several sources. The production of biofuels is usually energy more intensive than production of fossil fuels, but their usage can contribute to emission reduction in the Transport sector. In recent years, a lot of effort was also put into promotion of electric vehicles as zero emissions vehicles. This statement should be reconsidered, since the greenhouse impact of electrical vehicles is not negligible. Conversely, in some cases, an electrical vehicle can have an even higher emission impact than modern vehicles with sophisticated internal combustion engines. This is characteristic for countries where the majority of the electricity is produced in coal power plants. With the decrease of greenhouse gas emissions in the Electricity Production sector, and with the increase of battery capacity, the role of electric vehicles in the Transport sector will probably increase. Despite significant research and financial investments in electric vehicles development, the transport sector in near future will be mostly powered by internal combustion engines and petroleum-derived liquid fuels. The amount of pollution from transport sector will be further regulated with stricter emission norms combined with smaller amount of alternative fuel usage.


2018 ◽  
Author(s):  
Angel D. Ramirez ◽  
Danilo Arcentales ◽  
Andrea Boero

Climate change is a serious threat to sustainability. Anthropogenic climate change is due to the accumulation of greenhouse gases (GHG) in the atmosphere beyond natural levels. Anthropogenic GHG emissions are mostly associated with carbon-dioxide (CO2) originated in the combustion of fossil fuels used for heat, power, and transportation. Globally, transportation contributes to 14% of the global GHG emissions. The transport sector is one of the main contributors to the greenhouse gas emissions of Ecuador. In Guayaquil, the road mass transportation system comprises regular buses and the bus rapid transit (BRT) system. Electricity in Ecuador is mostly derived from hydropower, hence incurs relatively low GHG emissions along its life cycle. Therefore, electrification of transport has been seen as an opportunity for mitigation of GHG emissions. In this study, the effect of partial replacement of the bus rapid system fleet is investigated. Feeders have been chosen as the replacement target in five different scenarios. GHG emissions from diesel-based feeders have been calculated using the GREET Fleet Footprint Calculator tool. The GHG emissions associated with the electricity used for transportation is calculated using the life cycle inventory of the electricity generation system of Ecuador. Three energy mix scenarios are used for this purpose. The 2012 mix which had 61% hydropower; the mix of 85% hydropower and the marginal electricity scenario, which supposed the extreme case when the new demand for electricity occurs during peak demand periods. Results indicate that mitigation of GHG emissions is possible for almost all scenarios of percentage fleet replacement and all mix scenarios. Electric buses efficiency and the carbon intensity of the electricity mix are critical for GHG mitigation.


2020 ◽  
Vol 12 (21) ◽  
pp. 9152
Author(s):  
Reham Alhindawi ◽  
Yousef Abu Nahleh ◽  
Arun Kumar ◽  
Nirajan Shiwakoti

The economic and health impacts resulting from the greenhouse effect is a major concern in many countries. The transportation sector is one of the major contributors to greenhouse gas (GHG) emissions worldwide. Almost 15 percent of the global GHG and over 20 percent of energy-related CO2 emissions are produced by the transportation sector. Quantifying GHG emissions from the road transport sector assists in assessing the existing vehicles’ energy consumptions and in proposing technological interventions for enhancing vehicle efficiency and reducing energy-supply greenhouse gas intensity. This paper aims to develop a model for the projection of GHG emissions from the road transport sector. We consider the Vehicle-Kilometre by Mode (VKM) to Number of Transportation Vehicles (NTV) ratio for the six different modes of transportation. These modes include motorcycles, passenger cars, tractors, single-unit trucks, buses and light trucks data from the North American Transportation Statistics (NATS) online database over a period of 22 years. We use multivariate regression and double exponential approaches to model the projection of GHG emissions. The results indicate that the VKM to NTV ratio for the different transportation modes has a significant effect on GHG emissions, with the coefficient of determination adjusted R2 and R2 values of 89.46% and 91.8%, respectively. This shows that VKM and NTV are the main factors influencing GHG emission growth. The developed model is used to examine various scenarios for introducing plug-in hybrid electric vehicles and battery electric vehicles in the future. If there will be a switch to battery electric vehicles, a 62.2 % reduction in CO2 emissions would occur. The results of this paper will be useful in developing appropriate planning, policies, and strategies to reduce GHG emissions from the road transport sector.


Processes ◽  
2020 ◽  
Vol 8 (10) ◽  
pp. 1310 ◽  
Author(s):  
Ana Susmozas ◽  
Raquel Martín-Sampedro ◽  
David Ibarra ◽  
María E. Eugenio ◽  
Raquel Iglesias ◽  
...  

Nowadays, the transport sector is one of the main sources of greenhouse gas (GHG) emissions and air pollution in cities. The use of renewable energies is therefore imperative to improve the environmental sustainability of this sector. In this regard, biofuels play an important role as they can be blended directly with fossil fuels and used in traditional vehicles’ engines. Bioethanol is the most used biofuel worldwide and can replace gasoline or form different gasoline-ethanol blends. Additionally, it is an important building block to obtain different high added-value compounds (e.g., acetaldehyde, ethylene, 1,3-butadiene, ethyl acetate). Today, bioethanol is mainly produced from food crops (first-generation (1G) biofuels), and a transition to the production of the so-called advanced ethanol (obtained from lignocellulosic feedstocks, non-food crops, or industrial waste and residue streams) is needed to meet sustainability criteria and to have a better GHG balance. This work gives an overview of the current production, use, and regulation rules of bioethanol as a fuel, as well as the advanced processes and the co-products that can be produced together with bioethanol in a biorefinery context. Special attention is given to the opportunities for making a sustainable transition from bioethanol 1G to advanced bioethanol.


Author(s):  
Sachin Angadi ◽  

In India, the demand for water is continuously increasing due to the growing population. Approximately 16.5% of all country’s electricity used to pump this water is from fossil fuels leading to increased pump Life Cycle Cost (LCC) and Green House Gas (GHG) emissions. With the recent advancement in power electronics and drives, renewables like solar photovoltaic and wind energy are becoming readily available for water pumping applications resulting in the reduction of GHG emissions. Recently, research towards AC motor based Water Pumping Systems (WPS) has received a great emphasis owing to its numerous merits. Further, considering the tremendous acceptance of renewable sources, especially solar and wind, this paper provides a detailed review of single-stage and multi-stage WPS consisting of renewable source powered AC motors. The critical review is performed based on the following figure of merits, including the type of motor, power electronics interface and associated control strategies. Also, to add to the reliability of solar PV WPS, hybrid Wind-PV WPS will be discussed in detail. Readers will be presented with the state-of-the-art technology and research directions in Renewable Energy-based WPS (REWPS) to improve the overall system efficiency and hence reduce the payback period.


Sign in / Sign up

Export Citation Format

Share Document