scholarly journals 3D and 4D Printing of Multistable Structures

2020 ◽  
Vol 10 (20) ◽  
pp. 7254
Author(s):  
Hoon Yeub Jeong ◽  
Soo-Chan An ◽  
Yeonsoo Lim ◽  
Min Ji Jeong ◽  
Namhun Kim ◽  
...  
Keyword(s):  
3D Printing ◽  
Smart Materials ◽  
Compliant Mechanisms ◽  
Three Dimensional ◽  
4D Printing ◽  
New Paradigm ◽  
Strained Layers ◽  
Three Dimensional Printing ◽  
Mechanical Metamaterials ◽  
3D Printed

Three-dimensional (3D) printing is a new paradigm in customized manufacturing and allows the fabrication of complex structures that are difficult to realize with other conventional methods. Four-dimensional (4D) printing adds active, responsive functions to 3D-printed components, which can respond to various environmental stimuli. This review introduces recent ideas in 3D and 4D printing of mechanical multistable structures. Three-dimensional printing of multistable structures can enable highly reconfigurable components, which can bring many new breakthroughs to 3D printing. By adopting smart materials in multistable structures, more advanced functionalities and enhanced controllability can also be obtained in 4D printing. This could be useful for various smart and programmable actuators. In this review, we first introduce three representative approaches for 3D printing of multistable structures: strained layers, compliant mechanisms, and mechanical metamaterials. Then, we discuss 4D printing of multistable structures that can help overcome the limitation of conventional 4D printing research. Lastly, we conclude with future prospects.

scholarly journals 3D and 4D printing for optics and metaphotonics

Nanophotonics ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 1139-1160 ◽  
Author(s):  
Hoon Yeub Jeong ◽  
Eunsongyi Lee ◽  
Soo-Chan An ◽  
Yeonsoo Lim ◽  
Young Chul Jun
Keyword(s):  
3D Printing ◽  
Optical Sensors ◽  
Smart Materials ◽  
Three Dimensional ◽  
Functional Materials ◽  
4D Printing ◽  
New Paradigm ◽  
Optical Components ◽  
Freeform Optics ◽  
Recent Developments

AbstractThree-dimensional (3D) printing is a new paradigm in customized manufacturing and allows the fabrication of complex optical components and metaphotonic structures that are difficult to realize via traditional methods. Conventional lithography techniques are usually limited to planar patterning, but 3D printing can allow the fabrication and integration of complex shapes or multiple parts along the out-of-plane direction. Additionally, 3D printing can allow printing on curved surfaces. Four-dimensional (4D) printing adds active, responsive functions to 3D-printed structures and provides new avenues for active, reconfigurable optical and microwave structures. This review introduces recent developments in 3D and 4D printing, with emphasis on topics that are interesting for the nanophotonics and metaphotonics communities. In this article, we have first discussed functional materials for 3D and 4D printing. Then, we have presented the various designs and applications of 3D and 4D printing in the optical, terahertz, and microwave domains. 3D printing can be ideal for customized, nonconventional optical components and complex metaphotonic structures. Furthermore, with various printable smart materials, 4D printing might provide a unique platform for active and reconfigurable structures. Therefore, 3D and 4D printing can introduce unprecedented opportunities in optics and metaphotonics and may have applications in freeform optics, integrated optical and optoelectronic devices, displays, optical sensors, antennas, active and tunable photonic devices, and biomedicine. Abundant new opportunities exist for exploration.

scholarly journals Three-dimensional printing for heart diseases: clinical application review

2021 ◽  
Author(s):  
Yanyan Ma ◽  
Peng Ding ◽  
Lanlan Li ◽  
Yang Liu ◽  
Ping Jin ◽  
...  
Keyword(s):  
3D Printing ◽  
Clinical Application ◽  
Heart Diseases ◽  
Three Dimensional ◽  
Convincing Evidence ◽  
Surgical Interventions ◽  
Three Dimensional Printing ◽  
Complex Anatomy ◽  
Precise Understanding ◽  
3D Printed

AbstractHeart diseases remain the top threat to human health, and the treatment of heart diseases changes with each passing day. Convincing evidence shows that three-dimensional (3D) printing allows for a more precise understanding of the complex anatomy associated with various heart diseases. In addition, 3D-printed models of cardiac diseases may serve as effective educational tools and for hands-on simulation of surgical interventions. We introduce examples of the clinical applications of different types of 3D printing based on specific cases and clinical application scenarios of 3D printing in treating heart diseases. We also discuss the limitations and clinically unmet needs of 3D printing in this context.

scholarly journals Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 353
Author(s):  
Yanting Han ◽  
Qianqian Wei ◽  
Pengbo Chang ◽  
Kehui Hu ◽  
Oseweuba Valentine Okoro ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Biomedical Application ◽  
Three Dimensional ◽  
Antibacterial Properties ◽  
Natural Polymers ◽  
Three Dimensional Printing ◽  
3D Printed ◽  
Dental Applications ◽  
Hard Tissue Engineering

Hydroxyapatite (HA) and HA-based nanocomposites have been recognized as ideal biomaterials in hard tissue engineering because of their compositional similarity to bioapatite. However, the traditional HA-based nanocomposites fabrication techniques still limit the utilization of HA in bone, cartilage, dental, applications, and other fields. In recent years, three-dimensional (3D) printing has been shown to provide a fast, precise, controllable, and scalable fabrication approach for the synthesis of HA-based scaffolds. This review therefore explores available 3D printing technologies for the preparation of porous HA-based nanocomposites. In the present review, different 3D printed HA-based scaffolds composited with natural polymers and/or synthetic polymers are discussed. Furthermore, the desired properties of HA-based composites via 3D printing such as porosity, mechanical properties, biodegradability, and antibacterial properties are extensively explored. Lastly, the applications and the next generation of HA-based nanocomposites for tissue engineering are discussed.

scholarly journals Utility of Three-Dimensional Printing for Preoperative Assessment of Children with Extra-Cranial Solid Tumors: A Systematic Review

2022 ◽  
Vol 14 (1) ◽  
pp. 32-39
Author(s):  
Sachit Anand ◽  
Nellai Krishnan ◽  
Prabudh Goel ◽  
Anjan Kumar Dhua ◽  
Vishesh Jain ◽  
...  
Keyword(s):  
Systematic Review ◽  
3D Printing ◽  
Solid Tumors ◽  
Surgical Planning ◽  
Three Dimensional ◽  
Current Evidence ◽  
Printing Technology ◽  
Three Dimensional Printing ◽  
3D Printed ◽  
Dimensional Printing

Background: In cases with solid tumors, preoperative radiological investigations provide valuable information on the anatomy of the tumor and the adjoining structures, thus helping in operative planning. However, due to a two-dimensional view in these investigations, a detailed spatial relationship is difficult to decipher. In contrast, three-dimensional (3D) printing technology provides a precise topographic view to perform safe surgical resections of these tumors. This systematic review aimed to summarize and analyze current evidence on the utility of 3D printing in pediatric extra-cranial solid tumors. Methods: The present study was registered on PROSPERO—international prospective register of systematic reviews (registration number: CRD42020206022). PubMed, Embase, SCOPUS, and Google Scholar databases were explored with appropriate search criteria to select the relevant studies. Data were extracted to study the bibliographic information of each article, the number of patients in each study, age of the patient(s), type of tumor, organ of involvement, application of 3D printing (surgical planning, training, and/or parental education). The details of 3D printing, such as type of imaging used, software details, printing technique, printing material, and cost were also synthesized. Results: Eight studies were finally included in the systematic review. Three-dimensional printing technology was used in thirty children with Wilms tumor (n = 13), neuroblastoma (n = 7), hepatic tumors (n = 8), retroperitoneal tumor (n = 1), and synovial sarcoma (n = 1). Among the included studies, the technology was utilized for preoperative surgical planning (five studies), improved understanding of the surgical anatomy of solid organs (two studies), and improving the parental understanding of the tumor and its management (one study). Computed tomography and magnetic resonance imaging were either performed alone or in combination for radiological evaluation in these children. Different types of printers and printing materials were used in the included studies. The cost of the 3D printed models and time involved (range 10 h to 4–5 days) were reported by two studies each. Conclusions: 3D printed models can be of great assistance to pediatric surgeons in understanding the spatial relationships of tumors with the adjacent anatomic structures. They also facilitate the understanding of families, improving doctor–patient communication.

scholarly journals 4D Printing: The Dawn of “Smart” Drug Delivery Systems and Biomedical Applications

2021 ◽  
Vol 11 (5-S) ◽  
pp. 131-137
Author(s):  
Ahmar Khan ◽  
Mir Javid Iqbal ◽  
Saima Amin ◽  
Humaira Bilal ◽  
, Bilquees ◽  
...  
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Patient Compliance ◽  
Smart Materials ◽  
Healthcare Sector ◽  
Massachusetts Institute Of Technology ◽  
4D Printing ◽  
3D Printed ◽  
Smart Drug ◽  
Smart Drug Delivery

With the approval of first 3D printed drug “spritam” by USFDA, 3D printing is gaining acceptance in healthcare, engineering and other aspects of life. Taking 3D printing towards the next step gives birth to what is referred to as “4D printing”. The full credit behind the unveiling of 4D printing technology in front of the world goes to Massachusetts Institute of Technology (MIT), who revealed “time” in this technology as the fourth dimension.  4D printing is a renovation of 3D printing wherein special materials (referred to as smart materials) are incorporated which change their morphology post printing in response to a stimulus. Depending upon the applicability of this technology, there may be a variety of stimuli, most common among them being pH, water, heat, wind and other forms of energy.  The upper hand of 4D printing over 3D printing is that 3D printed structures are generally immobile, rigid and inanimate whereas 4D printed structures are flexible, mobile and able to interact with the surrounding environment based on the stimulus. This capability of 4D printing to transform 3D structures into smart structures in response to various stimuli promises a great potential for biomedical and bioengineering applications. The potential of 4D printing in developing pre-programmed biomaterials that can undergo transformations lays new foundations for enabling smart pharmacology, personalized medicine, and smart drug delivery, all of which can help in combating diseases in a smarter way. Hence, the theme of this paper is about the potential of 4D printing in creating smart drug delivery, smart pharmacology, targeted drug delivery and better patient compliance. The paper highlights the recent advancements of 4D printing in healthcare sector and ways by which 4D printing is doing wonders in creating smart drug delivery and tailored medicine. The major constraints in the approach have also been highlighted. Keywords: 4D printing, smart, drug delivery system, patient compliance, biomaterials, tailored medicine

4D Printing of Complex Ceramic Structures via Controlling Zirconia Contents and Patterns

2021 ◽  
Author(s):  
Zhicheng Rong ◽  
Chang Liu ◽  
Yingbin Hu
Keyword(s):  
3D Printing ◽  
Shape Memory ◽  
Shape Change ◽  
Three Dimensional ◽  
Ceramic Materials ◽  
Full Potential ◽  
Sintering Process ◽  
4D Printing ◽  
3D Printed ◽  
Dynamic Components

Abstract In recent years, more and more attentions have been attracted on integrating three-dimensional (3D) printing with fields (such as magnetic field) or innovating new methods to reap the full potential of 3D printing in manufacturing high-quality parts and processing nano-scaled composites. Among all of newly innovated methods, four-dimensional (4D) printing has been proved to be an effective way of creating dynamic components from simple structures. Common feeding materials in 4D printing include shape memory hydrogels, shape memory polymers, and shape memory alloys. However, few attempts have been made on 4D printing of ceramic materials to shape ceramics into intricate structures, owing to ceramics’ inherent brittleness nature. Facing this problem, this investigation aims at filling the gap between 4D printing and fabrication of complex ceramic structures. Inspired by swelling-and-shrinking-induced self-folding, a 4D printing method is innovated to add an additional shape change of ceramic structures by controlling ZrO2 contents and patterns. Experimental results evidenced that by deliberately controlling ZrO2 contents and patterns, 3D-printed ceramic parts would undergo bending and twisting during the sintering process. To demonstrate the capabilities of this method, more complex structures (such as a flower-like structure) were fabricated. In addition, functional parts with magnetic behaviors were 4D-printed by incorporating iron into the PDMS-ZrO2 ink.

scholarly journals Development of Smartphone-Controlled Hand and Arm Exoskeleton for Persons with Disability

2020 ◽  
Vol 11 (1) ◽  
pp. 161-170
Author(s):  
J-R. R. Diego ◽  
Dan William C. Martinez ◽  
Gerald S. Robles ◽  
John Ryan C. Dizon
Keyword(s):  
3D Printing ◽  
Low Cost ◽  
Three Dimensional ◽  
Prosthetic Device ◽  
Three Dimensional Printing ◽  
Plastic Materials ◽  
3D Printed ◽  
Available Technology ◽  
Electronic Parts ◽  
Dimensional Printing

AbstractThis study addresses the need for assistive technology of people who lost control of their upper limbs as well as people who are undergoing rehabilitation. Loss of upper limb control causes lack of functionality and social acceptability especially for many people in developing countries with fewer available technology. The study develops a modern but low-cost prosthetic device that can be controlled by users using a smartphone and can be rapidly manufactured using three-dimensional printing (3D printing) of plastic materials. The development of the prosthetic device includes designing the mechanical and electronic parts, programming the Arduino board and Android application for control, simulation and analysis of 3D printed parts most subjected to stress, and 3D printing the parts under different settings. The device was tested in terms of time spent and capacity of lifting varying loads when not worn and when worn by users. The device can effectively lift 500 grams of load in one second for a person weighing between 50 to 60 kilograms.

scholarly journals Surface Roughness Effect on the 3d Printed Butt Joints Strength

2015 ◽  
Author(s):  
V. Kovan ◽  
G. Altan ◽  
E.S. Topal ◽  
H.E. Camurlu
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Three Dimensional ◽  
Thickness Effect ◽  
Fused Deposition Modelling ◽  
Three Dimensional Printing ◽  
Fused Deposition ◽  
3D Printed ◽  
Dimensional Object

Three-dimensional printing or 3D printing (also called additive manufacturing) is any of various processes used to make a three-dimensional object. Fused deposition modelling (FDM) is an additive manufacturing technology commonly used for modelling, prototyping, and production applications. It is one of the techniques used for 3D printing. FDM is somewhat restricted in the size and the variation of shapes that may be fabricated. For parts too large to fit on a single build, for faster job builds with less support material, or for parts with finer features, sectioning and bonding FDM parts is a great solution. The strength of adhesive bonded FDM parts is affected by the surface roughness. In this study, the layer thickness effect on bonding strength is experimentally studied and the results are discussed.

3D Reconstruction Role in Surgical Treatment of Sinonasal Tumours

2018 ◽  
Vol 69 (6) ◽  
pp. 1455-1457
Author(s):  
Dragos Octavian Palade ◽  
Bogdan Mihail Cobzeanu ◽  
Petronela Zaharia ◽  
Marius Dabija
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Patient Specific ◽  
Three Dimensional Printing ◽  
Great Progress ◽  
3D Printed ◽  
Medical Modeling ◽  
Dimensional Printing ◽  
Tissue Defects

Three-dimensional printing has numerous applications and has gained much interest in the medical world. The constantly improving quality of 3D-printing applications has contributed to their increased use on patients. Nowadays, 3D printing is very well integrated in the surgical practice and research. Also, the field of head and neck reconstructive surgery is constantly evolving because of the three-dimensional printing, a technology which can be widely used in a variety of situations such as reconstruction of tissue defects, surgical planning, medical modeling and prosthesis. By using 3D printing into tissue engineering and materials, it may be possible for otolaryngologists to implant 3D printed functional grafts into patients and will also provide a rapid production of personalized patient-specific devices. Advances in 3D printed implants and future tissue-engineered constructs will bring great progress to the field of otorhinolaryngology.

scholarly journals 3D-Printed Modified-Release Tablets: A Review of the Recent Advances

2020 ◽  
Author(s):  
Angeliki Siamidi ◽  
Eleni Tsintavi ◽  
Dimitrios M. Rekkas ◽  
Marilena Vlachou
Keyword(s):  
3D Printing ◽  
Oral Drug Delivery ◽  
Three Dimensional ◽  
Main Idea ◽  
Delivery Systems ◽  
Oral Drug ◽  
Modified Release ◽  
Three Dimensional Printing ◽  
3D Printed ◽  
Dimensional Printing

The broad spectrum of applications of three-dimensional printing (3D printing, 3DP) has attracted the attention of researchers working in diverse fields. In pharmaceutics, the main idea behind 3D printing products is to design and develop delivery systems that are suited to an individual’s needs. In this way, the size, appearance, shape, and rate of delivery of a wide array of medicines could be easily adjusted. The aim of this chapter is to provide a compilation of the 3D printing techniques, used for the fabrication of oral drug delivery systems, and review the relevant scientific developments in particular those with modified-release characteristics.

Sign in / Sign up

Export Citation Format

Share Document