scholarly journals Environmental Evaluation of Concrete Containing Recycled and By-Product Aggregates Based on Life Cycle Assessment

2020 ◽  
Vol 10 (21) ◽  
pp. 7503
Author(s):  
Seungjun Roh ◽  
Rakhyun Kim ◽  
Won-Jun Park ◽  
Hoki Ban
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Bottom Ash ◽  
Environmental Cost ◽  
Recycled Aggregate ◽  
Coarse Aggregates ◽  
Fine Aggregates ◽  
Depletion Potential

This study aims to compare the potential environmental impact of the manufacture and production of recycled and by-product aggregates based on a life cycle assessment and to evaluate the environmental impact and cost when they are used as aggregates in concrete. To this end, the six potential environmental impacts (i.e., abiotic depletion potential, global warming potential, ozone-layer depletion potential, acidification potential, photochemical ozone creation potential, and eutrophication potential) of the manufacture and production of natural sand, natural gravel, recycled aggregate, slag aggregate, bottom ash aggregate, and waste glass aggregate were compared using information from life cycle inventory databases. Additionally, the environmental impacts and cost were evaluated when these aggregates were used to replace 30% of the fine and coarse aggregates in concrete with a design strength of 24 MPa. The environmental impact of concrete that incorporated slag aggregate as the fine aggregates or bottom ash aggregate as the coarse aggregates were lower than that of concrete that incorporated natural aggregate. However, concrete that incorporated bottom ash aggregate as the fine aggregates demonstrated relatively high environmental impacts. Based on these environmental impacts, the environmental cost was found to range from 5.88 to 8.79 USD/m3.

scholarly journals Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea

2021 ◽  
Vol 13 (5) ◽  
pp. 2898
Author(s):  
Rakhyun Kim ◽  
Myung-Kwan Lim ◽  
Seungjun Roh ◽  
Won-Jun Park
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Impact Analysis ◽  
Impact Categories ◽  
Environmental Impact Analysis ◽  
Apartment Buildings ◽  
Environmental Impact Categories ◽  
Weight Percentile

This study analyzed the characteristics of the environmental impacts of apartment buildings, a typical housing type in South Korea, as part of a research project supporting the streamlined life cycle assessment (S-LCA) of buildings within the G-SEED (Green Standard for Energy and Environmental Design) framework. Three recently built apartment building complexes were chosen as study objects for the quantitative evaluation of the buildings in terms of their embodied environmental impacts (global warming potential, acidification potential, eutrophication potential, ozone layer depletion potential, photochemical oxidant creation potential, and abiotic depletion potential), using the LCA approach. Additionally, we analyzed the emission trends according to the cut-off criteria of the six environmental impact categories by performing an S-LCA with cut-off criteria 90–99% of the cumulative weight percentile. Consequently, we were able to present the cut-off criterion best suited for S-LCA and analyze the effect of the cut-off criteria on the environmental impact analysis results. A comprehensive environmental impact analysis of the characteristics of the six environmental impact categories revealed that the error rate was below 5% when the cut-off criterion of 97.5% of the cumulative weight percentile was applied, thus verifying its validity as the optimal cut-off criterion for S-LCA.

Der Umsatz-Nachhaltigkeitsindex*/The Turnover-Sustainability-Index

2016 ◽  
Vol 106 (03) ◽  
pp. 136-140
Author(s):  
R. Miehe ◽  
M. Wiedenmann ◽  
T. Prof. Bauernhansl
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Sustainability Index ◽  
Behavior Based ◽  
Comparative Examination

Die Ökobilanz hat sich als Instrument zur Bewertung der Umweltauswirkungen von Produkten und Prozessen durchgesetzt. Dennoch stellt ihre Durchführung Nutzer immer wieder vor Herausforderungen. Der Fachartikel präsentiert einen Ansatz für eine vergleichende Betrachtung der ökologischen Auswirkungen des unternehmerischen Handelns auf Basis der jeweiligen Unternehmens- und Branchenumsätze. Der Umsatz-Nachhaltigkeitsindex soll als Konzept für ein Benchmark für Unternehmen einer Branche dienen.   Life Cycle Assessment has prevailed as an instrument to evaluate the environmental impact of products and processes. Its execution, however, poses a challenge to operators. In this paper, we present an approach for a comparative examination of environmental impacts of industrial behavior based on the turnover of companies and their equivalent sectors. The Turnover-Sustainability-Index serves as a benchmark for companies within a sector.

scholarly journals Environmental Impact for 3D Bone Tissue Engineering Scaffolds Life Cycle: An Assessment

2021 ◽  
Vol 12 (5) ◽  
pp. 6504-6515
Keyword(s):  
Tissue Engineering ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Environmental Impacts ◽  
Tissue Engineering Scaffolds ◽  
Industrial Soil ◽  
The Impact

With the development of additive manufacturing technology, 3D bone tissue engineering scaffolds have evolved. Bone tissue engineering is one of the techniques for repairing bone abnormalities caused by a variety of circumstances, such as injuries or the need to support damaged sections. Many bits of research have gone towards developing 3D bone tissue engineering scaffolds all across the world. The assessment of the environmental impact, on the other hand, has received less attention. As a result, the focus of this study is on developing a life cycle assessment (LCA) model for 3D bone tissue engineering scaffolds and evaluating potential environmental impacts. One of the methodologies to evaluating a complete environmental impact assessment is life cycle assessment (LCA). The cradle-to-grave method will be used in this study, and GaBi software was used to create the analysis for this study. Previous research on 3D bone tissue engineering fabrication employing poly(ethylene glycol) diacrylate (PEGDA) soaked in dimethyl sulfoxide (DMSO), and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO) as a photoinitiator will be reviewed. Meanwhile, digital light processing (DLP) 3D printing is employed as the production technique. The GaBi program and the LCA model developed to highlight the potential environmental impact. This study shows how the input and output of LCA of 3D bone tissue engineering scaffolds might contribute to environmental issues such as air, freshwater, saltwater, and industrial soil emissions. The emission contributing to potential environmental impacts comes from life cycle input, electricity and transportation consumption, manufacturing process, and material resources. The results from this research can be used as an indicator for the researcher to take the impact of the development of 3D bone tissue engineering on the environment seriously.

scholarly journals Environmental Impacts of Charging Concepts for Battery Electric Vehicles: A Comparison of On-Board and Off-Board Charging Systems Based on a Life Cycle Assessment

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6508
Author(s):  
Mona Kabus ◽  
Lars Nolting ◽  
Benedict J. Mortimer ◽  
Jan C. Koj ◽  
Wilhelm Kuckshinrichs ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Electric Vehicles ◽  
Economic Effects ◽  
System Level ◽  
Impact Categories ◽  
Dc System ◽  
Battery Electric Vehicles

We investigate the environmental impacts of on-board (based on alternating current, AC) and off-board (based on direct current, DC) charging concepts for electric vehicles using Life Cycle Assessment and considering a maximum charging power of 22 kW (AC) and 50 kW (DC). Our results show that the manufacturing of chargers provokes the highest contribution to environmental impacts of the production phase. Within the chargers, the filters could be identified as main polluters for all power levels. When comparing the results on a system level, the DC system causes less environmental impact than the AC system in all impact categories. In our diffusion scenarios for electric vehicles, annual emission reductions of up to 35 million kg CO2-eq. could be achieved when the DC system is used instead of the AC system. In addition to the environmental assessment, we examine economic effects. Here, we find annual savings of up to 8.5 million euros, when the DC system is used instead of the AC system.

Comparative Life Cycle Assessment between Ordinary Gypsum Plasterboard and Functional Phase-Change Gypsum Plasterboard

2020 ◽  
Vol 993 ◽  
pp. 1473-1480
Author(s):  
Yan Jiao Zhang ◽  
Li Ping Ma ◽  
Shi Wei Ren ◽  
Meng Chi Huang ◽  
Ying Wang ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Phase Change ◽  
Building Materials ◽  
Resource Depletion ◽  
Renewable Resource ◽  
Pollutant Emissions ◽  
Main Stage ◽  
Depletion Potential

With the emphasis of national policies on green manufacturing and the recognition of the people for green development, expanding the green assessment of products will be the general trend. In this study the life cycle assessment method was used to compile a list of resources, energy consumption and pollutant emissions during the life cycle of typical ordinary gypsum plasterboard and functional phase-change gypsum plasterboard, the key environmental impact indicators of both products during the life cycle calculated, the key stages affecting the environmental performance of products analyzed and identified, and the difference in environmental impacts between phase-change gypsum plasterboard and ordinary gypsum plasterboard compared and analyzed, for guiding the selection of green building materials and the development of ecological building materials. The results show that the global warming potential of phase-change gypsum plasterboard is 3.42 kgCO2 equivalent/m2, the non-renewable resource depletion potential is 2.25×10-5 kgSb equivalent/m2, the respiratory inorganic is 1.97×10-3 kgPM2.5 equivalent/m2, the eutrophication is 1.21×10-3 kgPO43- equivalent/m2, and the acidification is 9.47×10-3 kgSO2 equivalent/m2. Compared with ordinary gypsum plasterboard, the phase-change gypsum plasterboard shows the biggest increase by 874.03% in non-renewable resource depletion potential. The major environmental impact of ordinary gypsum plasterboard in the life cycle is mainly from energy use, and the transport process is the main stage of eutrophication. The use of phase-change materials in the phase-change gypsum plasterboard is the main stage causing environmental impact.

scholarly journals Life cycle assessment of the environmental impacts of transport infrastructure and individual modes of transport

2021 ◽  
Author(s):  
Kristína Kováčiková ◽  
◽  
Antonín Kazda
Keyword(s):  
Carbon Dioxide ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Impact Assessment ◽  
Environmental Impacts ◽  
Carbon Dioxide Emissions ◽  
Assessment Method ◽  
Global Perspective ◽  
Transport Infrastructure

The paper is focused on the assessment of the environmental impacts of transport infrastructure and individual types of transport using the life cycle assessment method. The paper contains a description of the basic terminology of the problem related to transport, the environment and methods of environmental impact assessment. The paper contains analysis on monitoring carbon dioxide emissions from a global perspective as well as from a regional perspective focused on Slovakia. The aim of the paper is to create a proposal for the assessment of environmental impacts of transport infrastructure, in the form of specification of areas of assessment for selected types of transport with a focus on carbon dioxide emissions. Using the knowledge and principles of the life cycle method, a proposal for relevant indicators and a proposal for a comprehensive assessment of the impacts of selected types of transport, focused on carbon dioxide emissions, is created in the paper

scholarly journals Disposable Medical Masks: Environmental Costs

2021 ◽  
Author(s):  
BURÇİN ATILGAN TÜRKMEN
Keyword(s):  
New York ◽  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Global Warming Potential ◽  
Functional Unit ◽  
Environmental Costs ◽  
Inventory Data

Abstract A massive increase in the use and production of masks worldwide has been seen in the current COVID-19 pandemic, which has contributed to reducing the transmission of the virus globally. This paper aims to evaluate the environmental impacts of disposable medical masks using the Life Cycle Assessment (LCA) method, first for the selected functional unit related to the manufacturing of one disposable medical mask and then for the global manufacturing of this type of mask in 2020. The inventory data was constructed directly from the industry. The system boundaries include the fabric, nose wire, and ear loops parts, transportation of materials, body making, ultrasonic vending, and packaging steps. The results suggest that the global warming potential of a disposable medical mask is 0.02 g CO2-Eq. for which the main contributor is the packaging step (44%) followed by the life cycle of fabric (27%), and nose wire (14%) parts. In total, 52 billion disposable medical masks used worldwide consumes 25 TJ of energy in 2020. The global warming potential of disposable medical masks supplied in a year of the COVID-19 pandemic is 1.1 Mt CO2 eq., equivalent to around 1.3 billion return flights from Istanbul to New York. This paper assessed the hotspots in the medical mask, allowing for a significant reduction in the environmental impact of mask use. This can be used as a roadmap for future mask designs.

scholarly journals Analysis of Life Cycle Environmental Impact of Recycled Aggregate

2019 ◽  
Vol 9 (5) ◽  
pp. 1021 ◽  
Author(s):  
Won-Jun Park ◽  
Taehyoung Kim ◽  
Seungjun Roh ◽  
Rakhyun Kim
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Resource Depletion ◽  
Recycled Aggregate ◽  
Natural Aggregate ◽  
Acidification Potential ◽  
Biotic Resource ◽  
Light Weight Aggregate ◽  
Ozone Depletion Potential ◽  
Depletion Potential

This study assessed the influence of matter discharged during the production (dry/wet) of recycled aggregate on global warming potential (GWP) and acidification potential (AP), eutrophication potential (EP), ozone depletion potential (ODP), biotic resource depletion potential (ADP), photochemical ozone creation potential (POCP) using the ISO 14044 (LCA) standard. The LCIA of dry recycled aggregate was 2.94 × 10−2 kg-CO2eq/kg, 2.93 × 10−5 kg-SO2eq/kg, 5.44 × 10−6 kg-PO43eq/kg, 4.70 × 10−10 kg-CFC11eq/kg, 1.25 × 10−5 kg-C2H4eq/kg, and 1.60 × 10−5 kg-Antimonyeq/kg, respectively. The environmental impact of recycled aggregate (wet) was up to 16~40% higher compared with recycled aggregate (dry); the amount of energy used by impact crushers while producing wet recycled aggregate was the main cause for this result. The environmental impact of using recycled aggregate was found to be up to twice as high as that of using natural aggregate, largely due to the greater simplicity of production of natural aggregate requiring less energy. However, ADP was approximately 20 times higher in the use of natural aggregate because doing so depletes natural resources, whereas recycled aggregate is recycled from existing construction waste. Among the life cycle impacts assessment of recycled aggregate, GWP was lower than for artificial light-weight aggregate but greater than for slag aggregate.

Life Cycle Assessment on Resourceful Utilization System of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry

2011 ◽  
Vol 383-390 ◽  
pp. 3792-3798
Author(s):  
Le Luo ◽  
Wei Yi Sun ◽  
Cheng Qiu ◽  
Shi Jun Su ◽  
Hong Tao Wang
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Composite Index ◽  
Original Data ◽  
Low Grade ◽  
The Novel ◽  
Electrolytic Manganese ◽  
Traditional Process

Reducing the adverse impacts to environment is a more and more important subject in electrolytic manganese industry. Life cycle assessment (LCA) has been a hot tool to measure the type and size of environmental impact. This paper firstly applied LCA on two different processes of producing electrolytic manganese. One process is the resourceful utilization system of high sulfur coal and low grade pyrolusite (the novel process for short)in which high sulfur coal is burned to generate power and emission SO2, then the SO2 is absorbed as reducing agent to leach the pyrolusite with 30% MnO2 grade. The other process is prevalent interiorly, called traditional process where the power is supplied by standard coal combustion, and sulfur acid leaches the manganese ore with 18% Mn grade. Life cycle software converts the original data to nine different kinds of indexes that are able to indicate types and sizes of environmental impacts. Results show that: among nine environmental impacts, the proportion of abiotic depletion potential (ADP) is biggest in both processes, but the value of the novel process is 23.25% smaller pointing the process saves more resource. All the values of other important impacts including GWP, Waste Solids, AP and RI of the novel process are less than those in traditional process. Especially, the value of acidification (AP) in novel process was -2.10×10-8 < 0, which means the novel process could control the acidification. In addition, through the composite index, using high sulfur coal in the novel process hasn’t bring any more serious impact than using standard coal. Therefore, LCA has provided rational evidence to prove that resourceful utilization system of high sulfur coal and low grade pyrolusite is more efficient and environmentally friendly and pointed which environmental impacts and life cycle links need improving . This paper could provide a reference for further environmental impact assessment of electrolytic manganese industry and an objective basis for decision-making.

Sign in / Sign up

Export Citation Format

Share Document