scholarly journals A Novel Method to Measure the Powder Consumption of Dental Air-Polishing Devices

2021 ◽  
Vol 11 (3) ◽  
pp. 1101
Author(s):  
Marcel Donnet ◽  
Maxime Fournier ◽  
Patrick R. Schmidlin ◽  
Adrian Lussi
Keyword(s):  
Treatment Time ◽  
Sampling Rate ◽  
Clinical Results ◽  
Short Treatment ◽  
Air Polishing ◽  
High Sampling Rate ◽  
Invasive Device ◽  
Set Up ◽  
Powder Consumption ◽  
Short Time

Background: Oral preventive measures should be efficient, minimally invasive, and painless. Air-polishing has this potential. As the efficiency and abrasivity of powders are dependent on the amount of powder projected, a better understanding of this characteristic will help us to determine the most effective and least invasive device. Method: A new laboratory set-up was designed using light diffusion to measure powder consumption with high accuracy due to its high sampling rate, even at short time intervals (<1 s). We tested six different marketed air-polishers of two different working types: Table-top and Handy. Results: All of the devices presented some powder delivery fluctuations. These differences were manufacturer-dependent. The powder delivery stability varied by up to two times, and ranged among the Table-top devices in the following order: E1 < M2 < N2. The mean powder consumption also varied by up to 2.9 times, in the following order: E1 < N2 < M3. All of the Handy devices presented a short treatment time and poor flow regularity, and consumed significantly more powder than the Table-top devices (by approximately +25%). Conclusion: The powder consumption analysis showed distinct differences between the devices. Therefore, the clinical results among the devices cannot be compared, as their working mechanisms are very different.

PLANE WAVES AT SMALL ARRAYS

Geophysics ◽  
1973 ◽  
Vol 38 (6) ◽  
pp. 1023-1041 ◽  
Author(s):  
John W. Woods ◽  
Paul R. Lintz
Keyword(s):  
Maximum Likelihood ◽  
White Noise ◽  
Plane Waves ◽  
Sampling Rate ◽  
Resolving Power ◽  
Time Gate ◽  
High Sampling Rate ◽  
Power Spectral ◽  
Short Time ◽  
Background White Noise

The resolving power of a seismic array is defined in terms of the array response function and via the classical uncertainty principle. Using the theory of maximum likelihood wavenumber spectra (Capon, 1969), we show for the case of two correlated plane waves that arbitrarily high resolution is achievable in the limit as the background white noise tends to zero. This extends Barnard’s (1969) result to the case of correlated plane waves. The increased resolution arises from the additional assumption that the data are plane waves over all space, and not zero off the array as the classical result assumes. It is found that a sample rate (in time) large compared to the Nyquist rate, is needed in the case of a short time gate at a small array. Cross‐power spectral matrices are estimated at 4 hz from 1 sec of computer generated data consisting of two correlated plane waves in white noise. These spectral matrices are then used to generate maximum likelihood wavenumber spectra. The two plane waves are resolved at various signal‐to‐noise ratios and at correlations up to ρ=0.8. The need for using a high sampling rate is demonstrated. Results are compared with conventional wavenumber spectra, where the classical resolution results hold. The use of a 1‐sec window provides improved resolution of the wavenumber structure as it changes in time, resulting in better separation of any time‐overlapping phases and multipathed waves that arise from one event.

Rapid, Refined, and Robust Method for Expression, Purification, and Characterization of Recombinant Human Amyloid-beta M1-42

2019 ◽  
Author(s):  
Priya Prakash ◽  
Travis Lantz ◽  
Krupal P. Jethava ◽  
Gaurav Chopra
Keyword(s):  
Amyloid Beta ◽  
Western Blots ◽  
Force Microscopy ◽  
E Coli ◽  
Atomic Force ◽  
Set Up ◽  
Short Time

Amyloid plaques found in the brains of Alzheimer’s disease (AD) patients primarily consists of amyloid beta 1-42 (Ab42). Commercially, Ab42 is synthetized using peptide synthesizers. We describe a robust methodology for expression of recombinant human Ab(M1-42) in Rosetta(DE3)pLysS and BL21(DE3)pLysS competent E. coli with refined and rapid analytical purification techniques. The peptide is isolated and purified from the transformed cells using an optimized set-up for reverse-phase HPLC protocol, using commonly available C18 columns, yielding high amounts of peptide (~15-20 mg per 1 L culture) in a short time. The recombinant Ab(M1-42) forms characteristic aggregates similar to synthetic Ab42 aggregates as verified by western blots and atomic force microscopy to warrant future biological use. Our rapid, refined, and robust technique to purify human Ab(M1-42) can be used to synthesize chemical probes for several downstream in vitro and in vivo assays to facilitate AD research.

scholarly journals Environmental Engineering Techniques to Restore Degraded Posidonia oceanica Meadows

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 661
Author(s):  
Luigi Piazzi ◽  
Stefano Acunto ◽  
Francesca Frau ◽  
Fabrizio Atzori ◽  
Maria Francesca Cinti ◽  
...  
Keyword(s):  
Large Scale ◽  
Natural Habitat ◽  
Cost Benefit ◽  
Cost Effective ◽  
Posidonia Oceanica ◽  
Environmental Engineering ◽  
Bottom Surface ◽  
Sessile Invertebrates ◽  
Set Up ◽  
Short Time

Seagrass planting techniques have shown to be an effective tool for restoring degraded meadows and ecosystem function. In the Mediterranean Sea, most restoration efforts have been addressed to the endemic seagrass Posidonia oceanica, but cost-benefit analyses have shown unpromising results. This study aimed at evaluating the effectiveness of environmental engineering techniques generally employed in terrestrial systems to restore the P. oceanica meadows: two different restoration efforts were considered, either exploring non-degradable mats or, for the first time, degradable mats. Both of them provided encouraging results, as the loss of transplanting plots was null or very low and the survival of cuttings stabilized to about 50%. Data collected are to be considered positive as the survived cuttings are enough to allow the future spread of the patches. The utilized techniques provided a cost-effective restoration tool likely affordable for large-scale projects, as the methods allowed to set up a wide bottom surface to restore in a relatively short time without any particular expensive device. Moreover, the mats, comparing with other anchoring methods, enhanced the colonization of other organisms such as macroalgae and sessile invertebrates, contributing to generate a natural habitat.

Intelligent Displacement Measuring System for Rock Stratum

2011 ◽  
Vol 103 ◽  
pp. 583-586
Author(s):  
Feng Ling Li ◽  
Jian Hua Rong ◽  
Yu Ping Zhang
Keyword(s):  
Civil Engineer ◽  
Real Time ◽  
Sampling Rate ◽  
Measuring System ◽  
Displacement Sensor ◽  
Rock Stratum ◽  
Baud Rate ◽  
Real Time Clock ◽  
High Sampling Rate ◽  
Displacement System

Measuring rock stratum displacement in dam grouting process is very important. A new displacement system is designed, comprising a programmable microcontroller Atmega16, a new grating capacitive displacement sensor(GCDS), DS1302 real time clock chip and announciator etc. The system has high sampling rate of 9600 baud rate and can trap the displacement equal to 0.001 millimeter in one second. Equipped with mechanical conveyance system, the system can be applied to the civil engineer. The experiment results show the instrument can measure accurately the displacement value and alarm geologic disaster in time, which can conduct continuous and accurate monitoring and provide operation decisions for dam engineers.

scholarly journals An Automatic Method for Detection and Update of Additive Changes in Road Network with GPS Trajectory Data

2019 ◽  
Vol 8 (9) ◽  
pp. 411 ◽  
Author(s):  
Tang ◽  
Deng ◽  
Huang ◽  
Liu ◽  
Chen
Keyword(s):  
Road Network ◽  
Sampling Rate ◽  
Quality Data ◽  
Automatic Method ◽  
Trajectory Data ◽  
The Road ◽  
High Sampling Rate ◽  
Map Generation ◽  
Gps Trajectory Data ◽  
Gps Trajectory

Ubiquitous trajectory data provides new opportunities for production and update of the road network. A number of methods have been proposed for road network construction and update based on trajectory data. However, existing methods were mainly focused on reconstruction of the existing road network, and the update of newly added roads was not given much attention. Besides, most of existing methods were designed for high sampling rate trajectory data, while the commonly available GPS trajectory data are usually low-quality data with noise, low sampling rates, and uneven spatial distributions. In this paper, we present an automatic method for detection and update of newly added roads based on the common low-quality trajectory data. First, additive changes (i.e., newly added roads) are detected using a point-to-segment matching algorithm. Then, the geometric structures of new roads are constructed based on a newly developed decomposition-combination map generation algorithm. Finally, the detected new roads are refined and combined with the original road network. Seven trajectory data were used to test the proposed method. Experiments show that the proposed method can successfully detect the additive changes and generate a road network which updates efficiently.

All-optical parallelization for high sampling rate photonic ADC in fully digital radar systems

2010 ◽  
Author(s):  
Paolo Ghelfi ◽  
Lingmei Ma ◽  
Xiaoxia Wu ◽  
Minyu Yao ◽  
Alan E. Willner ◽  
...  
Keyword(s):  
Sampling Rate ◽  
Radar Systems ◽  
High Sampling ◽  
High Sampling Rate ◽  
All Optical

Clinical Results and Complications of Tympanostomy

1976 ◽  
Vol 85 (2_suppl) ◽  
pp. 277-279 ◽  
Author(s):  
Eino Kokko ◽  
Tauno Palva
Keyword(s):  
Treatment Time ◽  
Clinical Results ◽  
Purulent Discharge ◽  
Tympanostomy Tube ◽  
Glue Ear

Tympanostomy tube treatment was used in 181 patients on 323 ears and a followup study was made as an average three years and two months later. Sixty-five percent of the ears had healed completely and in these the average tube treatment time had been 11.3 months. In 22% the tubes were still in position, the average time for treatment being 24.2 months. Five percent showed purulent discharge and recurrence of the glue ear was noted in 3%. A dry perforation developed in five patients. Cholesteatoma was seen in four ears but in only one of these it may have been related to the location of the tube at the posterior drum margin.

scholarly journals The European TeleCheck-AF project on remote app-based management of atrial fibrillation during the COVID-19 pandemic: centre and patient experiences

EP Europace ◽  
2021 ◽  
Author(s):  
Monika Gawałko ◽  
David Duncker ◽  
Martin Manninger ◽  
Rachel M J van der Velden ◽  
Astrid N L Hermans ◽  
...  
Keyword(s):  
Atrial Fibrillation ◽  
Care Delivery ◽  
Patient Characteristics ◽  
Patient Experiences ◽  
Af Ablation ◽  
District Hospitals ◽  
Inclusion Rate ◽  
Set Up ◽  
Time Required ◽  
Short Time

Abstract Aims TeleCheck-AF is a multicentre international project initiated to maintain care delivery for patients with atrial fibrillation (AF) during COVID-19 through teleconsultations supported by an on-demand photoplethysmography-based heart rate and rhythm monitoring app (FibriCheck®). We describe the characteristics, inclusion rates, and experiences from participating centres according the TeleCheck-AF infrastructure as well as characteristics and experiences from recruited patients. Methods and results Three surveys exploring centre characteristics (n = 25), centre experiences (n = 23), and patient experiences (n = 826) were completed. Self-reported patient characteristics were obtained from the app. Most centres were academic (64%) and specialized public cardiology/district hospitals (36%). Majority of the centres had AF outpatient clinics (64%) and only 36% had AF ablation clinics. The time required to start patient inclusion and total number of included patients in the project was comparable for centres experienced (56%) or inexperienced in mHealth use. Within 28 weeks, 1930 AF patients were recruited, mainly for remote AF control (31% of patients) and AF ablation follow-up (42%). Average inclusion rate was highest during the lockdown restrictions and reached a steady state at a lower level after easing the restrictions (188 vs. 52 weekly recruited patients). Majority (&gt;80%) of the centres reported no problems during the implementation of the TeleCheck-AF approach. Recruited patients [median age 64 (55–71), 62% male] agreed that the FibriCheck® app was easy to use (94%). Conclusion Despite different health care settings and mobile health experiences, the TeleCheck-AF approach could be set up within an extremely short time and easily used in different European centres during COVID-19.

Sign in / Sign up

Export Citation Format

Share Document