scholarly journals Emotional Effects Induced by the Application of a Cosmetic Product: A Real-Time Electrophysiological Evaluation

2021 ◽  
Vol 11 (11) ◽  
pp. 4766
Author(s):  
Damien Gabriel ◽  
Emmanuelle Merat ◽  
Adeline Jeudy ◽  
Sophie Cambos ◽  
Thibault Chabin ◽  
...  
Keyword(s):  
Real Time ◽  
Surveys And Questionnaires ◽  
Well Being ◽  
Dominant Hand ◽  
Cosmetic Products ◽  
Time Representation ◽  
Cosmetic Product ◽  
Positive Valence ◽  
The One ◽  
Emotional Effects

Well-being is an essential concept in cosmetics, but its complexity makes it very difficult to measure. The goal of the present study was to use electroencephalography (EEG) to compare the emotions induced by the application of two cosmetic products, and to offer to the experimenter a real-time representation of the participants’ emotional state. Fifteen female subjects participated in a cross-over study. Two cosmetic products of similar consistency were compared and applied from the dominant hand to the non-dominant hand. During the application, the neural activity of each participant was recorded with EEG. We found that the most appreciated product was the one that induced emotions with the most positive valence and the higher arousal, as recorded by EEG. Moreover, the videos recorded of each participant allowed us to attest to the differences in emotion processing for each product in real-time. This exploratory study shows that EEG can be successfully used to assess the emotions induced by the application of a cosmetic product, and in real-time. This technique could be a useful adjunct to other methods of examining emotions, such as observational experiments, surveys, and questionnaires.

A Real Time Control Architecture for Continuously Managing Patients in a Care Unit

1995 ◽  
Vol 34 (05) ◽  
pp. 475-488
Author(s):  
B. Seroussi ◽  
J. F. Boisvieux ◽  
V. Morice
Keyword(s):  
Real Time ◽  
Linear Time ◽  
Treatment Plan ◽  
Control Architecture ◽  
Real Time Control ◽  
Time Representation ◽  
Time Control ◽  
Continuous Support ◽  
Definition Of ◽  
Computerized System

Abstract:The monitoring and treatment of patients in a care unit is a complex task in which even the most experienced clinicians can make errors. A hemato-oncology department in which patients undergo chemotherapy asked for a computerized system able to provide intelligent and continuous support in this task. One issue in building such a system is the definition of a control architecture able to manage, in real time, a treatment plan containing prescriptions and protocols in which temporal constraints are expressed in various ways, that is, which supervises the treatment, including controlling the timely execution of prescriptions and suggesting modifications to the plan according to the patient’s evolving condition. The system to solve these issues, called SEPIA, has to manage the dynamic, processes involved in patient care. Its role is to generate, in real time, commands for the patient’s care (execution of tests, administration of drugs) from a plan, and to monitor the patient’s state so that it may propose actions updating the plan. The necessity of an explicit time representation is shown. We propose using a linear time structure towards the past, with precise and absolute dates, open towards the future, and with imprecise and relative dates. Temporal relative scales are introduced to facilitate knowledge representation and access.

MEREK SEBAGAI PENDORONG KEPUTUSAN PEMBELIAN PRODUK KOSMETIK MAKE OVER DI KOTA BLITAR

2018 ◽  
Vol 11 (2) ◽  
pp. 20-27
Author(s):  
Denok Wahyudi Setyo Rahayu
Keyword(s):  
Consumer Behavior ◽  
Driving Force ◽  
Cosmetic Products ◽  
Purchasing Decisions ◽  
Purchasing Decision ◽  
Cosmetic Product ◽  
The City

Consumer behavior has become a consumer habit in shopping. This affects the pattern of product purchasing decision. The purpose of the study was to find out whether the brand could be a driver of buying Make Over cosmetics product in the city of Blitar. The variables used are brands and purchasing decisions with samples of seller and buyers of Make Over cosmetic product in the city of Blitar. The resut of the study found that cosmetics brands Make Over became the driving force for purchasing cosmetic products in the city of Blitar. 

When Political Transitions Work

2018 ◽  
Author(s):  
Fanie du Toit
Keyword(s):  
South African ◽  
Well Being ◽  
Transition To Democracy ◽  
Political Transitions ◽  
Political Reconciliation ◽  
Peace Processes ◽  
Theoretical Approaches ◽  
African Experience ◽  
The One

Reconciliation emphasizes relationships as a crucial ingredient of political transition; this book argues for the importance of such a relational focus in crafting sustainable political transitions. Section I focuses on South Africa’s transition to democracy—how Mandela and De Klerk persuaded skeptical constituencies to commit to political reconciliation, how this proposal gained momentum, and how well the transition resulted in the goal of an inclusive and fair society. In developing a coherent theory of reconciliation to address questions such as these, I explain political reconciliation from three angles and thereby build a concept of reconciliation that corresponds largely with the South African experience. In Section II, these questions lead the discussion beyond South Africa into some of the prominent theoretical approaches to reconciliation in recent times. I develop typologies for three different reconciliation theories: forgiveness, agonism, and social restoration. I conclude in Section III that relationships created through political reconciliation, between leaders as well as between ordinary citizens, are illuminated when understood as an expression of a comprehensive “interdependence” that precedes any formal peace processes between enemies. I argue that linking reconciliation with the acknowledgment of interdependence emphasizes that there is no real alternative to reconciliation if the motivation is the long-term well-being of one’s own community. Without ensuring the conditions in which an enemy can flourish, one’s own community is unlikely to prosper sustainably. This theoretical approach locates the deepest motivation for reconciliation in choosing mutual well-being above the one-sided fight for exclusive survival at the other’s cost.

scholarly journals Infection control measures in times of antimicrobial resistance: a matter of solidarity

2020 ◽  
Vol 38 (S1) ◽  
pp. 47-55 ◽  
Author(s):  
Babette Rump ◽  
Aura Timen ◽  
Marlies Hulscher ◽  
Marcel Verweij
Keyword(s):  
Well Being ◽  
Multidrug Resistant ◽  
Additional Benefit ◽  
Control Measures ◽  
Individual Autonomy ◽  
Compensation Policy ◽  
Public Interests ◽  
Infection Control Measures ◽  
Baseline Levels ◽  
The One

AbstractControl measures directed at carriers of multidrug-resistant organisms are traditionally approached as a trade-off between public interests on the one hand and individual autonomy on the other. We propose to reframe the ethical issue and consider control measures directed at carriers an issue of solidarity. Rather than asking “whether it is justified to impose strict measures”, we propose asking “how to best care for a person’s carriership and well-being in ways that do not imply an unacceptable risk for others?”. A solidarity approach could include elevating baseline levels of precaution measures and accepting certain risks in cases where there is exceptionally much at stake. A generous national compensation policy that also covers for costs related to dedicated care is essential in a solidarity approach. An additional benefit of reframing the questions is that it helps to better acknowledge that being subjected to control measures is a highly personal matter.

Interlaboratory Validation of a Real-Time PCR 24-Hour Rapid Method for Detection of Salmonella in Foods

2009 ◽  
Vol 72 (5) ◽  
pp. 945-951 ◽  
Author(s):  
CHORNG-MING CHENG ◽  
KHANH T. VAN ◽  
WEN LIN ◽  
RICHARD M. RUBY
Keyword(s):  
Real Time ◽  
Screening Method ◽  
Rapid Screening ◽  
Selective Enrichment ◽  
Manual Method ◽  
Qpcr Method ◽  
Peptone Water ◽  
Interlaboratory Validation ◽  
Chili Powder ◽  
The One

The efficacy of a 24-h Salmonella real-time, or quantitative, PCR (qPCR) detection method was assessed through a collaborative effort involving eight Federal and state laboratories. Eleven foods including mashed potatoes, soft cheese, chili powder, chocolate, eggs, sprouts, apple juice, fish, shrimp, ground beef, and ground chicken were tested. For each food, seven blind samples were distributed to each participant for testing. These included six samples equivalently inoculated with 1 to 5 CFU/25 g of various serotypes of Salmonella (Gaminara, Weltevreden, Heidelberg, Senftenberg, Enteritidis, Newport, Typhimurium, and Kentucky for each food) and 10 to 50 CFU/25 g of the competitor Enterobacter cloacae. The seventh sample was inoculated with 10 to 50 CFU/25 g of the competitor, E. cloacae, only. These samples were tested for Salmonella by using four methods in parallel: (i) 24-h qPCR method detecting Salmonella from modified buffered peptone water enrichment medium; (ii) 48-h qPCR method detecting Salmonella from a secondary selective enrichment broth; (iii) modified Bacteriological Analytical Manual method; and (iv) VIDAS, an immunoassay system. The results of the statistical analysis showed there was no significant (P ≥ 0.05) difference between either of the qPCR methods and the modified Bacteriological Analytical Manual method for 10 of 11 foods. For the one exception, sprouts, detection by qPCR required 48 h. Both qPCR methods showed a detection limit of 0.08 to 0.2 CFU/g. These results provide a solid basis for using this 24-h qPCR rapid screening method to detect Salmonella in foods.

scholarly journals Real-time dynamics in the one-dimensional Hubbard model

2014 ◽  
Vol 90 (24) ◽  
Author(s):  
Luis Seabra ◽  
Fabian H. L. Essler ◽  
Frank Pollmann ◽  
Imke Schneider ◽  
Thomas Veness
Keyword(s):  
Hubbard Model ◽  
Real Time ◽  
One Dimensional ◽  
Time Dynamics ◽  
The One

Macroeconomic conditions are only an illusion, not the solution, to firm sustainability: unveiling the new dimension of stakeholder well-being

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zahid Irshad Younas ◽  
Mahvesh Khan ◽  
Mamdouh Abdulaziz Saleh Al-Faryan
Keyword(s):  
Well Being ◽  
Developed Countries ◽  
Macroeconomic Performance ◽  
Content Type ◽  
Macroeconomic Conditions ◽  
Us Economy ◽  
The Us ◽  
The Usa ◽  
Negative Impacts ◽  
The One

Purpose The purpose of the study is to explore the misconception that in developed countries, macroeconomic performance lead to sustainable firms or improves stakeholder well-being. The results may be the opposite or even worse. Design/methodology/approach This study examined this misconception using balanced panel data from 1,122 firms from different sectors of the US economy and data on macroeconomic performance from the World Bank. Findings The results of the one-step generalised method of moments indicate that most macroeconomic performance indicators had significant and negative impacts on firm sustainability and stakeholder well-being. Practical implications From a societal perspective, the results illustrate that the fruits of macroeconomic performance of the US economy do not reach stakeholders through firms’ sustainability. Thus, linking the economy’s macroeconomic performance with firm sustainability is vital for sustainably uplifting society and for stakeholder well-being. Originality/value From a policy perspective, this study reveals that the greater focus on macroeconomic performance in the USA over the past decades has resulted in lower firm sustainability because of the malfunctioning of social, economic, environmental and governance factors. This has negatively influenced stakeholder well-being in the country.

MODELING OF NEURAL PREDICTIVE CONTROL OF IRRIGATION MACHINES

2021 ◽  
pp. 14-22
Author(s):  
G. N. KAMYSHOVA ◽  
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Real Time ◽  
Predictive Control ◽  
Intelligent Control ◽  
Machine Learning Algorithms ◽  
Intelligent Control Systems ◽  
Artificial Neural ◽  
The One ◽  
Neural Predictive Control

The purpose of the study is to develop new scientific approaches to improve the efficiency of irrigation machines. Modern digital technologies allow the collection of data, their analysis and operational management of equipment and technological processes, often in real time. All this allows, on the one hand, applying new approaches to modeling technical systems and processes (the so-called “data-driven models”), on the other hand, it requires the development of fundamentally new models, which will be based on the methods of artificial intelligence (artificial neural networks, fuzzy logic, machine learning algorithms and etc.).The analysis of the tracks and the actual speeds of the irrigation machines in real time showed their significant deviations in the range from the specified speed, which leads to a deterioration in the irrigation parameters. We have developed an irrigation machine’s control model based on predictive control approaches and the theory of artificial neural networks. Application of the model makes it possible to implement control algorithms with predicting the response of the irrigation machine to the control signal. A diagram of an algorithm for constructing predictive control, a structure of a neuroregulator and tools for its synthesis using modern software are proposed. The versatility of the model makes it possible to use it both to improve the efficiency of management of existing irrigation machines and to develop new ones with integrated intelligent control systems.

Technological unemployment and the business model of sharing economy in conditions of digitalized economy

2021 ◽  
Vol 21 (1) ◽  
pp. 208-225
Author(s):  
Lyudmila Belova
Keyword(s):  
Business Model ◽  
Industrial Revolution ◽  
Negative Impact ◽  
Well Being ◽  
Sharing Economy ◽  
Technological Unemployment ◽  
The One ◽  
Development Paradigm ◽  
The Impact ◽  
Industrial Revolutions

The article traces the impact of innovation on employment and workers income during industrial revolutions. The aim of the study is to identify the business model that contributes to improving the well-being and reducing negative impact of innovative transformations on employees. To achieve this goal, we analyze: the conceptions of industrial revolutions; the “Engels pause”, which arose during the First Industrial Revolution as a “surge” in inequality due to the contradiction between productivity growth and profit, on the one hand, and the stagnation of workers’ real incomes, on the other; the effect of replacing manual labor with automated one; the problems of technological unemployment; the digital business model of sharing economy. The findings report conclusions concerning the change in economic development paradigm as a result of the replacement of classical consumption models by sharing economy business model, on the prospects of the sharing economy business model in the context of its ability to solve employment problems, overcome technological unemployment and increase employees’ income. The achieved results can be useful for policymakers and corporate structures that design innovative development strategies.

scholarly journals Design Space Approach for Preservative System Optimization of an Anti-Aging Eye Fluid Emulsion

2015 ◽  
Vol 18 (3) ◽  
pp. 551 ◽  
Author(s):  
Felipe Rebello Lourenço ◽  
Fabiane Lacerda Francisco ◽  
Márcia Regina Spuri Ferreira ◽  
Terezinha De Jesus Andreoli ◽  
Raimar Löbenberg ◽  
...  
Keyword(s):  
Design Space ◽  
Challenge Test ◽  
System Optimization ◽  
Effective Concentration ◽  
Optimization Strategy ◽  
Cosmetic Products ◽  
Cosmetic Product ◽  
Space Design ◽  
New Formula ◽  
Space Approach

The use of preservatives must be optimized in order to ensure the efficacy of an antimicrobial system as well as the product safety. Despite the wide variety of preservatives, the synergistic or antagonistic effects of their combinations are not well established and it is still an issue in the development of pharmaceutical and cosmetic products. The purpose of this paper was to establish a space design using a simplex-centroid approach to achieve the lowest effective concentration of 3 preservatives (methylparaben, propylparaben, and imidazolidinyl urea) and EDTA for an emulsion cosmetic product. Twenty-two formulae of emulsion differing only by imidazolidinyl urea (A: 0.00 to 0.30% w/w), methylparaben (B: 0.00 to 0.20% w/w), propylparaben (C: 0.00 to 0.10% w/w) and EDTA (D: 0.00 to 0.10% w/w) concentrations were prepared. They were tested alone and in binary, ternary and quaternary combinations. Aliquots of these formulae were inoculated with several microorganisms. An electrochemical method was used to determine microbial burden immediately after inoculation and after 2, 4, 8, 12, 24, 48, and 168 h. An optimization strategy was used to obtain the concentrations of preservatives and EDTA resulting in a most effective preservative system of all microorganisms simultaneously. The use of preservatives and EDTA in combination has the advantage of exhibiting a potential synergistic effect against a wider spectrum of microorganisms. Based on graphic and optimization strategies, we proposed a new formula containing a quaternary combination (A: 55%; B: 30%; C: 5% and D: 10% w/w), which complies with the specification of a conventional challenge test. A design space approach was successfully employed in the optimization of concentrations of preservatives and EDTA in an emulsion cosmetic product. This article is open to POST-PUBLICATION REVIEW. Registered readers (see “For Readers”) may comment by clicking on ABSTRACT on the issue’s contents page.

Sign in / Sign up

Export Citation Format

Share Document