scholarly journals First Evidences of Methyl Chloride (CH3Cl) Transport from the Northern Italy Boundary Layer during Summer 2017

Atmosphere ◽  
2020 ◽  
Vol 11 (3) ◽  
pp. 238 ◽  
Author(s):  
Paolo Cristofanelli ◽  
Jgor Arduini ◽  
Francescopiero Calzolari ◽  
Umberto Giostra ◽  
Paolo Bonasoni ◽  
...  
Keyword(s):  
Boundary Layer ◽  
High Frequency ◽  
Stratospheric Ozone ◽  
Methyl Chloride ◽  
Temporal Correlation ◽  
Northern Italy ◽  
Montreal Protocol ◽  
Anthropogenic Activity ◽  
Bivariate Analysis

Methyl Chloride (CH3Cl) is a chlorine-containing trace gas in the atmosphere contributing significantly to stratospheric ozone depletion. While the atmospheric CH3Cl emissions are predominantly caused by natural sources on the global budget, significant uncertainties still remain for the anthropogenic CH3Cl emission strengths. In summer 2007 an intensive field campaign within the ACTRIS-2 Project was hosted at the Mt. Cimone World Meteorological Organization/Global Atmosphere Watch global station (CMN, 44.17° N, 10.68° E, 2165 m a.s.l.). High-frequency and high precision in situ measurements of atmospheric CH3Cl revealed significant high-frequency variability superimposed on the seasonally varying regional background levels. The high-frequency CH3Cl variability was characterized by an evident cycle over 24 h with maxima during the afternoon which points towards a systematic role of thermal vertical transport of air-masses from the regional boundary layer. The temporal correlation analysis with specific tracers of anthropogenic activity (traffic, industry, petrochemical industry) together with bivariate analysis as a function of local wind regime suggested that, even if the role of natural marine emissions appears as predominant, the northern Italy boundary layer could potentially represent a non-negligible source of CH3Cl during summer. Since industrial production and use of CH3Cl have not been regulated under the Montreal Protocol (MP) or its successor amendments, continuous monitoring of CH3Cl outflow from the Po Basin is important to properly assess its anthropogenic emissions.

scholarly journals Estimates of European emissions of methyl chloroform using a Bayesian inversion method

2014 ◽  
Vol 14 (18) ◽  
pp. 9755-9770 ◽  
Author(s):  
M. Maione ◽  
F. Graziosi ◽  
J. Arduini ◽  
F. Furlani ◽  
U. Giostra ◽  
...  
Keyword(s):  
Point Source ◽  
High Frequency ◽  
Stratospheric Ozone ◽  
Montreal Protocol ◽  
Source Analysis ◽  
Bayesian Inversion ◽  
Inversion Method ◽  
Data Set ◽  
Methyl Chloroform

Abstract. Methyl chloroform (MCF) is a man-made chlorinated solvent contributing to the destruction of stratospheric ozone and is controlled under the "Montreal Protocol on Substances that Deplete the Ozone Layer" and its amendments, which called for its phase-out in 1996 in developed countries and 2015 in developing countries. Long-term, high-frequency observations of MCF carried out at three European sites show a constant decline in the background mixing ratios of MCF. However, we observe persistent non-negligible mixing ratio enhancements of MCF in pollution episodes, suggesting unexpectedly high ongoing emissions in Europe. In order to identify the source regions and to give an estimate of the magnitude of such emissions, we have used a Bayesian inversion method and a point source analysis, based on high-frequency long-term observations at the three European sites. The inversion identified southeastern France (SEF) as a region with enhanced MCF emissions. This estimate was confirmed by the point source analysis. We performed this analysis using an 11-year data set, from January 2002 to December 2012. Overall, emissions estimated for the European study domain decreased nearly exponentially from 1.1 Gg yr−1 in 2002 to 0.32 Gg yr−1 in 2012, of which the estimated emissions from the SEF region accounted for 0.49 Gg yr−1 in 2002 and 0.20 Gg yr−1 in 2012. The European estimates are a significant fraction of the total semi-hemisphere (30–90° N) emissions, contributing a minimum of 9.8% in 2004 and a maximum of 33.7% in 2011, of which on average 50% are from the SEF region. On the global scale, the SEF region is thus responsible for a minimum of 2.6% (in 2003) and a maximum of 10.3% (in 2009) of the global MCF emissions.

Atmospheric impacts of short-lived chlorinated species over the recent past: a chemistry-climate perspective

2021 ◽  
Author(s):  
Ewa Bednarz ◽  
Ryan Hossaini ◽  
Luke Abraham ◽  
Peter Braesicke ◽  
Martyn Chipperfield
Keyword(s):  
Atmospheric Chemistry ◽  
Climate Model ◽  
Stratospheric Ozone ◽  
Lower Boundary ◽  
Montreal Protocol ◽  
Recent Past ◽  
Substantial Impact ◽  
Ozone Depleting Substances ◽  
The Impact

<p>The emissions of most long-lived halogenated ozone-depleting substances (ODSs) are now decreasing, owing to controls on their production introduced by Montreal Protocol and its amendments. However, short-lived halogenated compounds can also have substantial impact on atmospheric chemistry, including stratospheric ozone, particularly if emitted near climatological uplift regions. It has recently become evident that emissions of some chlorinated very short-lived species (VSLSs), such as chloroform (CHCl<sub>3</sub>) and dichloromethane (CH<sub>2</sub>Cl<sub>2</sub>), could be larger than previously believed and increasing, particularly in Asia. While these may exert a significant influence on atmospheric chemistry and climate, their impacts remain poorly characterised. </p><p> </p><p>We address this issue using the UM-UKCA chemistry-climate model (CCM). While not only the first, to our knowledge, model study addressing this problem using a CCM, it is also the first such study employing a whole atmosphere model, thereby simulating the tropospheric Cl-VSLSs emissions and the resulting stratospheric impacts in a fully consistent manner. We use a newly developed Double-Extended Stratospheric-Tropospheric (DEST) chemistry scheme, which includes emissions of all major chlorinated and brominated VSLSs alongside an extended treatment of long-lived ODSs.</p><p> </p><p>We examine the impacts of rising Cl-VSLSs emissions on atmospheric chlorine tracers and ozone, including their long-term trends. We pay particular attention to the role of ‘nudging’, as opposed to the free-running model set up, for the simulated Cl-VSLSs impacts, thereby demostrating the role of atmospheric dynamics in modulating the atmospheric responses to Cl-VSLSs. In addition, we employ novel estimates of Cl-VSLS emissions over the recent past and compare the results with the simulations that prescribe Cl-VSLSs using simple lower boundary conditions. This allows us to demonstrate the impact such choice has on the dominant location and seasonality of the Cl-VSLSs transport into the stratosphere.</p>

scholarly journals Estimates of European emissions of methyl chloroform using a Bayesian inversion method

2014 ◽  
Vol 14 (6) ◽  
pp. 8209-8256 ◽  
Author(s):  
M. Maione ◽  
F. Graziosi ◽  
J. Arduini ◽  
F. Furlani ◽  
U. Giostra ◽  
...  
Keyword(s):  
Point Source ◽  
High Frequency ◽  
Stratospheric Ozone ◽  
Montreal Protocol ◽  
Source Analysis ◽  
Bayesian Inversion ◽  
Inversion Method ◽  
Data Set ◽  
Methyl Chloroform

Abstract. Methyl chloroform (MCF) is a man-made chlorinated solvent contributing to the destruction of stratospheric ozone and is controlled under the Montreal Protocol on Substances that Deplete the Ozone Layer. Long-term, high-frequency observations of MCF carried out at three European sites show a constant decline of the background mixing ratios of MCF. However, we observe persistent non-negligible mixing ratio enhancements of MCF in pollution episodes suggesting unexpectedly high ongoing emissions in Europe. In order to identify the source regions and to give an estimate of the magnitude of such emissions, we have used a Bayesian inversion method and a point source analysis, based on high-frequency long-term observations at the three European sites. The inversion identified south-eastern France (SEF) as a region with enhanced MCF emissions. This estimate was confirmed by the point source analysis. We performed this analysis using an eleven-year data set, from January 2002 to December 2012. Overall emissions estimated for the European study domain decreased nearly exponentially from 1.1 Gg yr−1 in 2002 to 0.32 Gg yr−1 in 2012, of which the estimated emissions from the SEF region accounted for 0.49 Gg yr−1 in 2002 and 0.20 Gg yr−1 in 2012. The European estimates are a significant fraction of the total semi-hemisphere (30–90° N) emissions, contributing a minimum of 9.8% in 2004 and a maximum of 33.7% in 2011, of which on average 50% are from the SEF region. On the global scale, the SEF region is thus responsible from a minimum of 2.6% (in 2003) to a maximum of 10.3% (in 2009) of the global MCF emissions.

scholarly journals Air and Surface Temperature Coupling in the Convective Atmospheric Boundary Layer

2011 ◽  
Vol 68 (12) ◽  
pp. 2945-2954 ◽  
Author(s):  
Anirban Garai ◽  
Jan Kleissl
Keyword(s):  
Boundary Layer ◽  
Surface Temperature ◽  
Coherent Structures ◽  
High Frequency ◽  
Spatial Scales ◽  
Temporal Correlation ◽  
Convective Boundary ◽  
Velocity Information ◽  
Thermal Signature ◽  
Practical Implications

Abstract In a convective boundary layer, coherent structures were detected through their thermal signature on an artificial turf surface using high-frequency thermal infrared (TIR) imagery and surface layer turbulence measurements. The coherent structures cause surface temperature variations over tens of seconds and spatial scales of tens to a few hundred meters. Evidence of processes similar to those in a renewal event was observed. Spatial and temporal correlation analysis revealed the geometric and velocity information of the structures at the ground footprint of air temperature measurements. The velocity of the coherent structures was consistent with the wind speed at 6.5 m AGL. Practical implications of turbulence-driven surface temperature variability for thermal remote sensing are also discussed.

scholarly journals The role of soils in the regulation of air quality

2021 ◽  
Vol 376 (1834) ◽  
pp. 20200172 ◽  
Author(s):  
Donna Giltrap ◽  
Jo Cavanagh ◽  
Bryan Stevenson ◽  
Anne-Gäelle Ausseil
Keyword(s):  
Air Quality ◽  
Stratospheric Ozone ◽  
Soil Health ◽  
Well Being ◽  
Anthropogenic Activity ◽  
Gas Fluxes ◽  
Harmful Emissions ◽  
Pathogen Transport ◽  
Development Goals

Soils play a key role in meeting the UN Sustainable Development Goals (SDGs). In this study, we review the contribution of soils to the regulation of air quality, which is one of ‘Nature's Contributions to People’ identified by the Intergovernmental-Policy Platform on Biodiversity and Ecosystem Services (IPBES). This is particularly relevant for SDG3 (health and well-being) and 11 (sustainable cities and well-being) but also impacts other SDGs. Soils can act as both a source and a sink of air pollutants (and their precursors). In addition, soils support plant growth which plays a major role in regulating air quality. The scale of the soil impacts on air quality range from global (e.g. greenhouse gas fluxes, stratospheric ozone depletion) to local (e.g. odours, particulates, pathogen transport). Harmful emissions from soil can be increased or decreased by anthropogenic activity, while climate change is likely to modify future emissions patterns, both directly and in response to human mitigation and adaption actions. Although soils are not the only source of these pollutants, it is worthwhile managing them to reduce erosion and nutrient losses to maintain soil health so we may continue to benefit from the contributions to good quality of life they provide. This article is part of the theme issue ‘The role of soils in delivering Nature's Contributions to People’.

scholarly journals A growing threat to the ozone layer from short-lived anthropogenic chlorocarbons

2017 ◽  
Vol 17 (19) ◽  
pp. 11929-11941 ◽  
Author(s):  
David E. Oram ◽  
Matthew J. Ashfold ◽  
Johannes C. Laube ◽  
Lauren J. Gooch ◽  
Stephen Humphrey ◽  
...  
Keyword(s):  
East Asia ◽  
Marine Boundary Layer ◽  
Atmospheric Transport ◽  
Stratospheric Ozone ◽  
Montreal Protocol ◽  
Tropical Regions ◽  
Upper Troposphere ◽  
Order Of Magnitude ◽  
The Western Pacific

Abstract. Large and effective reductions in emissions of long-lived ozone-depleting substance (ODS) are being achieved through the Montreal Protocol, the effectiveness of which can be seen in the declining atmospheric abundances of many ODSs. An important remaining uncertainty concerns the role of very short-lived substances (VSLSs) which, owing to their relatively short atmospheric lifetimes (less than 6 months), are not regulated under the Montreal Protocol. Recent studies have found an unexplained increase in the global tropospheric abundance of one VSLS, dichloromethane (CH2Cl2), which has increased by around 60 % over the past decade. Here we report dramatic enhancements of several chlorine-containing VSLSs (Cl-VSLSs), including CH2Cl2 and CH2ClCH2Cl (1,2-dichloroethane), observed in surface and upper-tropospheric air in East and South East Asia. Surface observations were, on occasion, an order of magnitude higher than previously reported in the marine boundary layer, whilst upper-tropospheric data were up to 3 times higher than expected. In addition, we provide further evidence of an atmospheric transport mechanism whereby substantial amounts of industrial pollution from East Asia, including these chlorinated VSLSs, can rapidly, and regularly, be transported to tropical regions of the western Pacific and subsequently uplifted to the tropical upper troposphere. This latter region is a major provider of air entering the stratosphere, and so this mechanism, in conjunction with increasing emissions of Cl-VSLSs from East Asia, could potentially slow the expected recovery of stratospheric ozone.

scholarly journals A growing threat to the ozone layer from short-lived anthropogenic chlorocarbons

2017 ◽  
Author(s):  
David E. Oram ◽  
Matthew J. Ashfold ◽  
Johannes C. Laube ◽  
Lauren J. Gooch ◽  
Stephen Humphrey ◽  
...  
Keyword(s):  
East Asia ◽  
Marine Boundary Layer ◽  
Atmospheric Transport ◽  
Stratospheric Ozone ◽  
Montreal Protocol ◽  
Tropical Regions ◽  
Upper Troposphere ◽  
Order Of Magnitude ◽  
The Western Pacific

Abstract. Large and effective reductions in emissions of long-lived ozone-depleting substance (ODS) are being achieved through the Montreal Protocol, the effectiveness of which can be seen in the declining atmospheric abundances of many ODS. An important remaining uncertainty concerns the role of very short lived substances (VSLS) which, owing to their relatively short atmospheric lifetimes (less than 6 months), are not regulated under the Montreal Protocol. Recent studies have found an unexplained increase in the global tropospheric abundance of one VSLS, dichloromethane (CH2Cl2), which has increased by around 60 % over the past decade. Here we report dramatic enhancements of several chlorine-containing VSLS, including CH2Cl2 and CH2ClCH2Cl (1,2-dichloroethane), observed in surface and upper tropospheric air in East and South East Asia. Surface observations were an order of magnitude higher than previously reported in the marine boundary layer, whilst upper tropospheric data were up to 3 times higher than expected. In addition we provide further evidence of an atmospheric transport mechanism whereby substantial amounts of industrial pollution from East Asia, including these chlorinated VSLS, can rapidly, and regularly, be transported to tropical regions of the western Pacific and subsequently uplifted to the tropical upper troposphere. This latter region is a major provider for air entering the stratosphere and so this mechanism, in conjunction with increasing emissions of Cl-VSLS from East Asia, could potentially slow the expected recovery of stratospheric ozone.

A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater: Part I

TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 20-26 ◽  
Author(s):  
PEEYUSH TRIPATHI ◽  
MARGARET JOYCE ◽  
PAUL D. FLEMING ◽  
MASAHIRO SUGIHARA
Keyword(s):  
Boundary Layer ◽  
Experimental Design ◽  
High Speed ◽  
Statistical Study ◽  
Process Variables ◽  
High Speeds ◽  
The Stability ◽  
Air Removal ◽  
Removal System

Using an experimental design approach, researchers altered process parameters and material prop-erties to stabilize the curtain of a pilot curtain coater at high speeds. Part I of this paper identifies the four significant variables that influence curtain stability. The boundary layer air removal system was critical to the stability of the curtain and base sheet roughness was found to be very important. A shear thinning coating rheology and higher curtain heights improved the curtain stability at high speeds. The sizing of the base sheet affected coverage and cur-tain stability because of its effect on base sheet wettability. The role of surfactant was inconclusive. Part II of this paper will report on further optimization of curtain stability with these four variables using a D-optimal partial-facto-rial design.

Calculation-and-experimental estimation of the role of the frequency ratio in changing the endurance at two-frequency deformation modes

2019 ◽  
Vol 85 (1(I)) ◽  
pp. 64-71 ◽  
Author(s):  
M. M. Gadenin
Keyword(s):  
High Frequency ◽  
Experimental Studies ◽  
Low Frequency ◽  
Reduction Factor ◽  
Single Frequency ◽  
Cyclic Loads ◽  
Small Ratio ◽  
Harmonic Components ◽  
Deformation Modes

The cycle configuration at two-frequency loading regimes depends on the number of parameters including the absolute values of the frequencies and amplitudes of the low-frequency and high-frequency loads added during this mode, the ratio of their frequencies and amplitudes, as well as the phase shift between these harmonic components, the latter having a significant effect only with a small ratio of frequencies. Presence of such two-frequency regimes or service loading conditions for parts of machines and structures schematized by them can significantly reduce their endurance. Using the results of experimental studies of changes in the endurance of a two-frequency loading of specimens of cyclically stable, cyclically softened and cyclically hardened steels under rigid conditions we have shown that decrease in the endurance under the aforementioned conditions depends on the ratio of frequencies and amplitudes of operation low-frequency low-cycle and high-frequency vibration stresses, and, moreover, the higher the level of the ratios of amplitudes and frequencies of those stacked harmonic processes of loading the greater the effect. It is shown that estimation of such a decrease in the endurance compared to a single frequency loading equal in the total stress (strains) amplitudes can be carried out using an exponential expression coupling those endurances through a parameter (reduction factor) containing the ratio of frequencies and amplitudes of operation cyclic loads and characteristic of the material. The reduction is illustrated by a set of calculation-experimental curves on the corresponding diagrams for each of the considered types of materials and compared with the experimental data.

Sign in / Sign up

Export Citation Format

Share Document