scholarly journals Heat-Inactivation of Fetal and Newborn Sera Did Not Impair the Expansion and Scaffold Engineering Potentials of Fibroblasts

2021 ◽  
Vol 8 (11) ◽  
pp. 184
Author(s):  
Félix-Antoine Pellerin ◽  
Christophe Caneparo ◽  
Ève Pellerin ◽  
Stéphane Chabaud ◽  
Martin Pelletier ◽  
...  

Heat inactivation of bovine sera is routinely performed in cell culture laboratories. Nevertheless, it remains debatable whether it is still necessary due to the improvement of the production process of bovine sera. Do the benefits balance the loss of many proteins, such as hormones and growth factors, that are very useful for cell culture? This is even truer in the case of tissue engineering, the processes of which is often very demanding. This balance is examined here, from nine populations of fibroblasts originating from three different organs, by comparing the capacity of adhesion and proliferation of cells, their metabolism, and the capacity to produce the stroma; their histological appearance, thickness, and mechanical properties were also evaluated. Overall, serum inactivation does not appear to provide a significant benefit.

2018 ◽  
Vol 59 (3-4) ◽  
pp. 265-275 ◽  
Author(s):  
Siegmund Lang ◽  
Markus Loibl ◽  
Marietta Herrmann

Background: Platelet-rich plasma (PRP) refers to an enriched platelet suspension in plasma. In addition to the clinical application of PRP in the context of various orthopedic diseases and beyond, PRP and platelet lysate (PL) have been in focus in the field of tissue engineering. In this review, we discuss the application of PRP as a cell culture supplement and as part of tissue engineering strategies, particularly emphasizing current hurdles and ambiguities regarding the efficacy of PRP in these approaches. Summary: As a putative autologous replacement for animal-derived supplements such as fetal calf serum (FCS), PRP has been applied as cell culture supplement for the expansion of stem and progenitor cells for tissue engineering applications and cell therapies. Attributed to the high content of growth factors in platelets, PRP has been shown to promote cell growth, which was mostly superior to standard cultures supplemented with FCS, while the differentiation capacity of progenitor cells seems not to be affected. However, it was also suggested that cultivation of cells with PRP significantly alters the protein expression profile in cells in comparison to FCS, indicating that the influence of PRP on cell behavior should be thoroughly investigated. Moreover, different PRP preparation methods and donor variations have to be considered for the use of PRP under good manufacturing practice conditions. PRP has been used for various tissue engineering applications in the context of bone, cartilage, skin, and soft tissue repair, where most studies were conducted in the field of bone tissue engineering. These approaches take either advantage of the release of chemoattractive, angiogenic, proliferative, and putatively pro-regenerative growth factors from PRP, and/or the hydrogel properties of activated PRP, making it suitable as a cell delivery vehicle. In many of these studies, PRP is combined with biomaterials, cells, and in some cases recombinant growth factors. Although the experimental design often does not allow conclusions on the pro-regenerative effect of PRP itself, most publications report beneficial effects if PRP is added to the tissue-engineered construct. Furthermore, it was demonstrated that the release of growth factors from PRP may be tailored and controlled when PRP is combined with materials able to capture growth factors. Key Messages: Platelet-derived preparations such as PRP and PL represent a promising source of autologous growth factors, which may be applied as cell culture supplement or to promote regeneration in tissue-engineered constructs. Furthermore, activated PRP is a promising candidate as an autologous cell carrier. However, the studies investigating PRP in these contexts often show conflicting results, which most likely can be attributed to the lack of standardized preparation methods, particularly with regard to the platelet content and donor variation of PRP. Ultimately, the use of PRP has to be tailored for the individual application.


Author(s):  
James P. Kennedy ◽  
Robert W. Hitchcock

Methods of creating a scaffold for tissue engineering that allow for modification of properties such as pore size, porosity, and anisotropy are essential for tissue engineering applications. For example the pore size and material anisotropy have been shown to affect cardiomyocyte elongation and alignment [1]. Phase-inversion spray polymerization (PISP) is a method for rapidly precipitating polymers onto a surface by depositing the polymer solution simultaneously with a nonsolvent, and may be used to create biocompatible scaffolds of engineered morphological and mechanical properties by varying the solubility of the polymer in the nonsolvent [2]. We report here on the fabrication of scaffolds using different nonsolvents and methods of in-process elongation that allow for control of stiffness, anisotropy ratio, porosity, and in vitro cell culture.


2021 ◽  
Vol 9 ◽  
Author(s):  
Antonio Junior Lepedda ◽  
Gabriele Nieddu ◽  
Marilena Formato ◽  
Matthew Brandon Baker ◽  
Julia Fernández-Pérez ◽  
...  

Cardiovascular diseases represent the number one cause of death globally, with atherosclerosis a major contributor. Despite the clinical need for functional arterial substitutes, success has been limited to arterial replacements of large-caliber vessels (diameter > 6 mm), leaving the bulk of demand unmet. In this respect, one of the most challenging goals in tissue engineering is to design a “bioactive” resorbable scaffold, analogous to the natural extracellular matrix (ECM), able to guide the process of vascular tissue regeneration. Besides adequate mechanical properties to sustain the hemodynamic flow forces, scaffold’s properties should include biocompatibility, controlled biodegradability with non-toxic products, low inflammatory/thrombotic potential, porosity, and a specific combination of molecular signals allowing vascular cells to attach, proliferate and synthesize their own ECM. Different fabrication methods, such as phase separation, self-assembly and electrospinning are currently used to obtain nanofibrous scaffolds with a well-organized architecture and mechanical properties suitable for vascular tissue regeneration. However, several studies have shown that naked scaffolds, although fabricated with biocompatible polymers, represent a poor substrate to be populated by vascular cells. In this respect, surface functionalization with bioactive natural molecules, such as collagen, elastin, fibrinogen, silk fibroin, alginate, chitosan, dextran, glycosaminoglycans (GAGs), and growth factors has proven to be effective. GAGs are complex anionic unbranched heteropolysaccharides that represent major structural and functional ECM components of connective tissues. GAGs are very heterogeneous in terms of type of repeating disaccharide unit, relative molecular mass, charge density, degree and pattern of sulfation, degree of epimerization and physicochemical properties. These molecules participate in a number of vascular events such as the regulation of vascular permeability, lipid metabolism, hemostasis, and thrombosis, but also interact with vascular cells, growth factors, and cytokines to modulate cell adhesion, migration, and proliferation. The primary goal of this review is to perform a critical analysis of the last twenty-years of literature in which GAGs have been used as molecular cues, able to guide the processes leading to correct endothelialization and neo-artery formation, as well as to provide readers with an overall picture of their potential as functional molecules for small-diameter vascular regeneration.


2015 ◽  
Vol 31 (5) ◽  
Author(s):  
Soumyadip Majumder ◽  
Mahadev D. Kaulaskar ◽  
Sudarsan Neogi

AbstractBiotechnology continues to offer routes for many exciting and unique products. Researchers genetically altered goats with a spider gene. These goats produce milk that contains a protein that can be extracted to produce biosteel fibers for use in bulletproof vests. It is referred to as “biosteel” to highlight its strength comparable to steel. This review paper describes the important aspects of produced dragline spider silk proteins via cell culture techniques using silk genes derived from two species of weaving spiders. These fibers were tested for a number of mechanical properties and compared to natural spider silk. In effect, fibers of biosteel were able to absorb similar amounts of energy as natural spider silk by stretching further. As opposed to most other synthetic fibers, biosteel is ecofriendly both in terms of its composition and production process.


2012 ◽  
Vol 9 (77) ◽  
pp. 3444-3454 ◽  
Author(s):  
Reetta Sartoneva ◽  
Anne-Marie Haaparanta ◽  
Tuija Lahdes-Vasama ◽  
Bettina Mannerström ◽  
Minna Kellomäki ◽  
...  

Different synthetic biomaterials such as polylactide (PLA), polycaprolactone and poly- l -lactide-co-ε-caprolactone (PLCL) have been studied for urothelial tissue engineering, with favourable results. The aim of this research was to further optimize the growth surface for human urothelial cells (hUCs) by comparing different PLCL-based membranes: smooth (s) and textured (t) PLCL and knitted PLA mesh with compression-moulded PLCL (cPLCL). The effects of topographical texturing on urothelial cell response and mechanical properties under hydrolysis were studied. The main finding was that both sPLCL and tPLCL supported hUC growth significantly better than cPLCL. Interestingly, tPLCL gave no significant advantage to hUC attachment or proliferation compared with sPLCL. However, during the 14 day assessment period, the majority of cells were viable and maintained phenotype on all the membranes studied. The material characterization exhibited potential mechanical characteristics of sPLCL and tPLCL for urothelial applications. Furthermore, the highest elongation of tPLCL supports the use of this kind of texturing. In conclusion, in light of our cell culture results and mechanical characterization, both sPLCL and tPLCL should be further studied for urothelial tissue engineering.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Israd H. Jaafar ◽  
Sabrina S. Jedlicka ◽  
John P. Coulter

Abstract Novel materials possessing physical, mechanical, and chemical properties similar to those found in vivo provide a potential platform for building artificial microenvironments for tissue engineering applications. Poly(glycerol sebacate) is one such material. It has tunable mechanical properties within the range of common tissue, and favorable cell response without surface modification with adhesive ligands, and biodegradability. In this chapter, an overview of the material is presented, focusing on synthesis, characterization, microfabrication, use as a substrate in in vitro mammalian cell culture, and degradation characteristics.


2018 ◽  
Vol 24 (8) ◽  
pp. 843-854 ◽  
Author(s):  
Weiguo Xu ◽  
Shujun Dong ◽  
Yuping Han ◽  
Shuqiang Li ◽  
Yang Liu

Hydrogels, as a class of materials for tissue engineering and drug delivery, have high water content and solid-like mechanical properties. Currently, hydrogels with an antibacterial function are a research hotspot in biomedical field. Many advanced antibacterial hydrogels have been developed, each possessing unique qualities, namely high water swellability, high oxygen permeability, improved biocompatibility, ease of loading and releasing drugs and structural diversity. In this article, an overview is provided on the preparation and applications of various antibacterial hydrogels. Furthermore, the prospects in biomedical researches and clinical applications are predicted.


2006 ◽  
Vol 1 (3) ◽  
pp. 333-343 ◽  
Author(s):  
Masashi Nomi ◽  
Hideaki Miyake ◽  
Yoshifumi Sugita ◽  
Masato Fujisawa ◽  
Shay Soker

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.


2011 ◽  
Vol 17 (21-22) ◽  
pp. 2583-2592 ◽  
Author(s):  
Jessica A. DeQuach ◽  
Shauna H. Yuan ◽  
Lawrence S.B. Goldstein ◽  
Karen L. Christman

Sign in / Sign up

Export Citation Format

Share Document