scholarly journals Mangiferin-Loaded Polymeric Nanoparticles: Optical Characterization, Effect of Anti-topoisomerase I, and Cytotoxicity

Cancers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 1965 ◽  
Author(s):  
Francisco Fabian Razura-Carmona ◽  
Alejandro Pérez-Larios ◽  
Napoleón González-Silva ◽  
Mayra Herrera-Martínez ◽  
Luis Medina-Torres ◽  
...  
Keyword(s):  
Topoisomerase I ◽  
Polymeric Nanoparticles ◽  
Biological Activities ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Encapsulation Process ◽  
Mean Size ◽  
High Concentrations

Mangiferin is an important xanthone compound presenting various biological activities. The objective of this study was to develop, characterize physicochemical properties, and evaluate the anti-topoisomerase activity of poly(lactic-co-glycolic acid) (PLGA) nanoparticles containing mangiferin. The nanoparticles were developed by the emulsion solvent evaporation method and the optimal formulation was obtained with a response surface methodology (RSM); this formulation showed a mean size of 176.7 ± 1.021 nm with a 0.153 polydispersibility index (PDI) value, and mangiferin encapsulation efficiency was about 55%. The optimal conditions (6000 rpm, 10 min, and 300 μg of mangiferin) obtained 77% and the highest entrapment efficiency (97%). The in vitro release profile demonstrated a gradual release of mangiferin from 15 to 180 min in acidic conditions (pH 1.5). The fingerprint showed a modification in the maximum absorption wavelength of both the polymer and the mangiferin. Results of anti-toposiomerase assay showed that the optimal formulation (MG4, 25 µg/mL) had antiproliferative activity. High concentrations (2500 µg/mL) of MG4 showed non-in vitro cytotoxic effect on BEAS 2B and HEPG2. Finally, this study showed an encapsulation process with in vitro gastric digestion resistance (1.5 h) and without interfering with the metabolism of healthy cells and their biological activity.

scholarly journals Development of a Topical Insulin Polymeric Nanoformulation for Skin Burn Regeneration: An Experimental Approach

2021 ◽  
Vol 22 (8) ◽  
pp. 4087
Author(s):  
Maria Quitério ◽  
Sandra Simões ◽  
Andreia Ascenso ◽  
Manuela Carvalheiro ◽  
Ana Paula Leandro ◽  
...  
Keyword(s):  
Wound Healing ◽  
Healing Process ◽  
In Vitro Release ◽  
Peptide Hormone ◽  
Plga Nanoparticles ◽  
Wound Healing Process ◽  
Target Area ◽  
Encapsulation Process

Insulin is a peptide hormone with many physiological functions, besides its use in diabetes treatment. An important role of insulin is related to the wound healing process—however, insulin itself is too sensitive to the external environment requiring the protective of a nanocarrier. Polymer-based nanoparticles can protect, deliver, and retain the protein in the target area. This study aims to produce and characterize a topical treatment for wound healing consisting of insulin-loaded poly-DL-lactide/glycolide (PLGA) nanoparticles. Insulin-loaded nanoparticles present a mean size of approximately 500 nm and neutral surface charge. Spherical shaped nanoparticles are observed by scanning electron microscopy and confirmed by atomic force microscopy. SDS-PAGE and circular dichroism analysis demonstrated that insulin preserved its integrity and secondary structure after the encapsulation process. In vitro release studies suggested a controlled release profile. Safety of the formulation was confirmed using cell lines, and cell viability was concentration and time-dependent. Preliminary safety in vivo assays also revealed promising results.

scholarly journals Clarithromycin-Loaded Poly (Lactic-co-glycolic Acid) (PLGA) Nanoparticles for Oral Administration: Effect of Polymer Molecular Weight and Surface Modification with Chitosan on Formulation, Nanoparticle Characterization and Antibacterial Effects

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1632 ◽  
Author(s):  
A. Alper Öztürk ◽  
Evrim Yenilmez ◽  
Mustafa Güçlü Özarda
Keyword(s):  
Oral Delivery ◽  
Glycolic Acid ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Test Method ◽  
Molecular Weights ◽  
Antibiotic Group ◽  
Surface Modified

Clarithromycin (CLR) is a member of the macrolide antibiotic group. CLR has low systemic oral bioavailability and is a drug of class II of the Biopharmaceutical Classification System. In many studies, using nanoparticles (NPs) as a drug delivery system has been shown to increase the effectiveness and bioavailability of active drug substances. This study describes the development and evaluation of poly (lactic-co-glycolic acid) (PLGA) NPs and chitosan (CS)-coated PLGA NPs for oral delivery of CLR. NPs were obtained by nanoprecipitation technique and characterized in detail, and the effect of three molecular weights (Mw1: 7.000–17.000, Mw2: 38.000–54.000, Mw3: 50.000–190.000) of PLGA and CS coating on particle size (PS), zeta potential (ZP), entrapment efficiency (EE%), and release properties etc. were elucidated. Gastrointestinal stability and cryoprotectant effect tests were performed on the NPs. The PS of the prepared NPs were in the range of 178 to 578 nm and they were affected by the Mw and CS coating. In surface-modified formulations with CS, the ZP of the NPs increased significantly to positive values. EE% varied from 62% to 85%, depending upon the Mw and CS coating. In vitro release studies of CLR-loaded NPs showed an extended release up to 144 h. Peppas–Sahlin and Weibull kinetic model was found to fit best for CLR release from NPs. By the broth microdilution test method, the antibacterial activity of the formulations was determined on Staphylococcus aureus (ATCC 25923), Listeria monocytogenes (ATCC 1911), and Klebsiella pneumoniae (ATCC 700603). The structures of the formulations were clarified by thermal (DSC), FT-IR, and 1H-NMR analysis. The results showed that PS, ZP, EE%, and dissolution rates of NPs were directly related to the Mw of PLGA and CS coating.

scholarly journals SN38 loaded nanostructured lipid carriers (NLCs); preparation and in vitro evaluations against glioblastoma

2021 ◽  
Vol 32 (7) ◽  
Author(s):  
Ali Sabouri Shirazi ◽  
Reyhaneh Varshochian ◽  
Mahsa Rezaei ◽  
Yalda Hosseinzadeh Ardakani ◽  
Rassoul Dinarvand
Keyword(s):  
Cell Line ◽  
Accurate Determination ◽  
In Vitro Release ◽  
Parent Drug ◽  
Entrapment Efficiency ◽  
Nanostructured Lipid Carrier ◽  
Glioblastoma Cell Line ◽  
Glioblastoma Cell ◽  
Mean Size

AbstractSN38 is the active metabolite of irinotecan with 1000-fold greater cytotoxicity compared to the parent drug. Despite the potential, its application as a drug is still seriously limited due to its stability concerns and low solubility in acceptable pharmaceutical solvents. To address these drawbacks here nanostructured lipid carrier (NLC) containing SN38 was prepared and its cytotoxicity against U87MG glioblastoma cell line was investigated. The formulations were prepared using hot ultrasonication and solvent evaporation/emulsification methods. NLCs with a mean size of 140 nm and particle size distribution (PDI) of 0.25 were obtained. The average loading efficiency was 9.5% and its entrapment efficiency was 81%. In order to obtain an accurate determination of released amount of SN38 a novel medium and extraction method was designed, which lead to an appropriate in vitro release profile of the drug from the prepared NLCs. The MTT test results revealed the significant higher cytotoxicity of NLCs on U87MG human glioblastoma cell line compared with the free drug. The confocal microscopy images confirmed the proper penetration of the nanostructures into the cells within the first 4 h. Consequently, the results indicated promising potentials of the prepared NLCs as a novel treatment for glioblastoma.

Development of Polymeric Nanocarriers for Brain Targeted Delivery of Atorvastatin: A Quality-By-Design Approach

2020 ◽  
Vol 10 (2) ◽  
pp. 149-158
Author(s):  
Guilherme A.G. Martins ◽  
Fabio S. Murakami ◽  
Mauro S. Oliveira ◽  
Ana F. Furian ◽  
Helen Treichel ◽  
...  
Keyword(s):  
Quality By Design ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Physicochemical Characteristics ◽  
In Vivo Studies ◽  
Mean Size ◽  
Release Study ◽  
Vitro Release

Objective: Atorvastatin (ATV) is effective in reducing total cholesterol and low-density lipoprotein levels. Furthermore, it produces pleiotropic effects in neurodegenerative conditions such as Parkinson's, Alzheimer's, and epilepsy. However, due to the effective defense system of the central nervous system (CNS), the development of new medicines for clinical conditions has proven difficult. In this context, nanotechnology was applied as a promising solution to promote drug vectorization to the brain. Methods: The solvent emulsification-diffusion method was used to develop nanoparticles (NPs) based on polylactic acid and coated with polysorbate 80 containing ATV. Quality-by-Design (QbD) was used in the optimization of nanoparticles production through the application of the experimental design Box-Behnken Design. Results: After optimizing the independent factors including sonication time, surfactant concentration and surfactant volume, the NPs presented physicochemical characteristics such as entrapment efficiency of 86.4 ± 2.4%, mean size of 225.2 ± 4.8 nm, and zeta potential of -14.4 ± 0.36 mV. In the in vitro release study, approximately 20% of the encapsulated ATV was released. Conclusion: The application of QbD was very useful in demonstrating its applicability in the nanotechnological pharmaceutical area for controlling and predicting the influence of the variables in the production of NPs. The NPs developed in this study presented adequate physicochemical characteristics, which is promising for future in vivo studies. The physicochemical characteristics included entrapment efficiency of 86.4 ± 2.4%, mean size of 225.2 ± 4.8 nm, and zeta potential of -14.4 ± 0.36 mV. In the in vitro release study, approximately 20% of the encapsulated ATV was released. The application of QbD was very useful in demonstrating its applicability in the nanotechnological pharmaceutical area for controlling and predicting the influence of the variables in the production of NPs. The NPs developed in this study presented adequate physicochemical characteristics, which is promising for future in vivo studies.

scholarly journals Development of Nitazoxanide Loaded Polymeric Nanocarriers: Box Behnken Experimental Design Based Optimisation and Characterisation

2020 ◽  
pp. 34-53
Author(s):  
Charu Bharti ◽  
Shrestha Sharma ◽  
Shobhit Kumar ◽  
Syed Arman Rabbani
Keyword(s):  
Polymeric Nanoparticles ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Poly Vinyl Alcohol ◽  
Cross Linking ◽  
Surface Geometry ◽  
Sustained Drug Release ◽  
Model Drug

The current investigation is focused on formulation, optimisation and characterisation of polymeric based nanomaterial. Nitazoxanide (NTZ) loaded polymeric nanoparticles were prepared by homogenisation technique using Eudragit RL100 as a polymer matrix and Poly vinyl alcohol (PVA) as a cross linking agent. NTZ was used as a model drug and investigated for preformulation parameters along with excipients, identification of concentration for optimization, selection of independent (X) and dependent (Y) variables and characterisation of optimised formulation. Polymeric nanoparticles were obtained after optimization using 33 factorial design by Box Behnken Design expert (BBD). The role and influence of key process variables i.e. concentration of polymer, concentration of cross linking agent and speed of rotation of homogeniser at their respective three different levels for the optimisation of formulation were also investigated. The synthesised optimised polymeric nanoparticles were further characterised by dynamic light scattering (DLS) for its particle size (137.11nm), PDI (0.180) and zeta potential (33.4 mV) while X-ray diffraction (XRD) was used to justify the amorphous and crystalline nature of drug and excipients. Transmission electron microscopy (TEM) further revealed surface geometry of these nanoparticles being spherical in shape, drug entrapment efficiency (%DEE) was found to be 81.89% and in vitro release studies showed sustained drug release effect. The antimicrobial activity against Pseudomonas aeruginosa, Streptococcus mutans and Escherichia coli was also determined.

scholarly journals Development and in vitro evaluation of Letrozole loaded biodegradable nanoparticles for breast cancer therapy

2009 ◽  
Vol 45 (3) ◽  
pp. 585-591 ◽  
Author(s):  
Sanjoy Kumar Dey ◽  
Bivash Mandal ◽  
Manas Bhowmik ◽  
Lakshmi Kanta Ghosh
Keyword(s):  
Breast Cancer ◽  
Particle Size ◽  
Cancer Therapy ◽  
Methylene Chloride ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Breast Cancer Therapy ◽  
Mean Size ◽  
High Entrapment Efficiency

The objectives of our study were to prepare and evaluate a biodegradable nanoparticulate system of Letrozole (LTZ) intended for breast cancer therapy. LTZ loaded poly(lactide-co-glycolide) nanoparticles (LTZ-PLGA-NPs) were prepared by emulsion-solvent evaporation method using methylene chloride and polyvinyl alcohol. Percentage of drug (with respect to polymer) was selected as formulation variable. LTZ-PLGA-NPs were characterized by particle size, zeta potential, infrared spectra, drug entrapment efficiency and in vitro release. Sonication was done with an ultrasound pulse sonicator at 70 W, 30 kHz for 90 sec to produce stable NPs of mean size range from 64 nm to 255 nm with high entrapment efficiency (68% to 82%). Percentage of drug significantly influenced particle size, entrapment efficiency and release (p <0.05). The system sustained release of LTZ significantly and further investigation could exhibit its potential usefulness in breast cancer therapy.

scholarly journals Optimized Preparation of Levofloxacin Loaded Polymeric Nanoparticles

Pharmaceutics ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 57 ◽  
Author(s):  
Manuel López-López ◽  
Angela Fernández-Delgado ◽  
María Moyá ◽  
Daniel Blanco-Arévalo ◽  
Cecilio Carrera ◽  
...  
Keyword(s):  
Organic Solvent ◽  
Polymeric Nanoparticles ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Antimicrobial Activities ◽  
Plga Nanoparticles ◽  
Time Period ◽  
Vitro Release

In this work, poly(lactic-co-glycolic acid) (PLGA) and chitosan (CS) nanoparticles were synthesized with the purpose of encapsulating levofloxacin (LEV). A thorough study has been carried out in order to optimize the preparation of LEV-loaded polymeric nanoparticles (NPs) suitable for parenteral administration. Changes in the preparation method, in the organic solvent nature, in the pH of the aqueous phase, or in the temperature were investigated. To the authors´ knowledge, a systematic study in order to improve the LEV nanocarrier characteristics and the yield of drug encapsulation has not been carried out to date. The physicochemical characterization of the NPs, their encapsulation efficiency (EE), and the in vitro release of LEV revealed that the best formulation was the emulsion-solvent evaporation method using dichloromethane as organic solvent, which renders suitable LEV loaded PLGA NPs. The morphology of these NPs was investigated using TEM. Their antimicrobial activities against several microorganisms were determined in vitro measuring the minimum inhibitory concentration (MIC). The results show that the use of these loaded LEV PLGA nanoparticles has the advantage of the slow release of the antibiotic, which would permit an increase in the time period between administrations as well as to decrease the side effects of the drug.

scholarly journals Formulation and Evaluation of Pregabalin Loaded Eudragit S100 Nanoparticles

2016 ◽  
Vol 3 (2) ◽  
pp. 64-70
Author(s):  
B. Senthilnathan ◽  
A. Maheswaran ◽  
K. Gopalasatheeskumar ◽  
K. Masilamani ◽  
Raihana Z Edros
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Polymeric Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Profile ◽  
Drug Release Profile ◽  
Eudragit S100 ◽  
Study Results

In this work, polymeric nanoparticles containing Pregabalin was prepared and optimized the ideal concentration of polymer based on its in vitro release profile for a period of 24hrs.The nanoparticles were prepared by solvent displacement method using various concentrations of Eudragit S100 (EPNP1-EPNP5). The prepared nanoparticles were characterized for its particle size, zeta potential, drug content, entrapment efficiency and invitro drug release profile. The preformulation study results confirmed the compatibility between the drug and other excipients used in the formulation. The optimized formulation was selected based on its particle size, entrapment efficiency and in vitro drug release profile. The formulation which contains 300mg of Eudragit S100 (EPNP5) was selected as optimized concentration for the controlled release of Pregabalin for a period of 24hrs.

Preparation and In-vitro Evaluation of Fe3O4 Encapsulated by Chitosan Loaded Capecitabine Nanoparticles for the Treatment of Breast Cancer

2016 ◽  
Vol 6 (3) ◽  
Author(s):  
Shanmuganathan S. ◽  
Nigma S. ◽  
Anbarasan B. ◽  
Harika B.
Keyword(s):  
Fe3o4 Nanoparticles ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Evaluation ◽  
Sem Image ◽  
Therapeutic Molecules ◽  
Dialysis Method ◽  
Vitro Release

Nanoparticulate Carriers which is biodegradable, biocompatible and bio adhesive have significant feasible applications for administration of therapeutic molecules. The present study was aimed to formulate and optimise Capecitabine loaded Chitosan-Fe3O4 Nanoparticles and to study the in-vitro evaluation by sigma dialysis method. Capecitabine loaded chitosan – Fe3O4 nanoparticles batches with different ratios of drug: polymer (1:1, 1:2, 1:3, 1:4, 1:5, 1:6) were prepared by ionic gelation method. Increase in polymer concentration increases the nanoparticle drug content. Entrapment efficiency was 60.12% with drug to polymer ratio F3 (1:3). In-vitro release was found to be 65.20% for 12 hrs. Capecitabine from chitosanFe3O4 nanoparticles SEM image reveals discrete spherical structure and particles with size range of 100-500nm. FTIR studies represent the functional groups present with no characteristics change in formulations. Samples stored at refrigerator conditions showed better stability compared with samples kept at other conditions during 8 weeks of storage.

Formulation and Evaluation of Mefloquine Hydrochloride Nanoparticles

2014 ◽  
Vol 7 (1) ◽  
pp. 2377-2386
Author(s):  
Dilip Kumar Gupta ◽  
B K Razdan ◽  
Meenakshi Bajpai
Keyword(s):  
Particle Size ◽  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Taste Masking ◽  
Diffusion Method ◽  
Drug Entrapment Efficiency ◽  
Resistant Strains ◽  
Vitro Release

The present study deals with the formulation and evaluation of mefloquine hydrochloride nanoparticles. Mefloquine is a blood schizonticidal quinoline compound, which is indicated for the treatment of mild-to-moderate acute malarial infections caused by mefloquine-susceptible multi-resistant strains of P. falciparum and P. vivax. The purpose of the present work is to minimize the dosing frequency, taste masking toxicity and to improve the therapeutic efficacy by formulating mefloquine HCl nanoparticles. Mefloquine nanoparticles were formulated by emulsion diffusion method using polymer poly(ε-caprolactone) with six different formulations. Nanoparticles were characterized by determining its particle size, polydispersity index, drug entrapment efficiency, drug content, particle morphological character and drug release. The particle size ranged between 100 nm to 240 nm. Drug entrapment efficacy was >95%. The in-vitro release of nanoparticles were carried out which exhibited a sustained release of mefloquine HCl from nanoparticles up to 24 hrs. The results showed that nanoparticles can be a promising drug delivery system for sustained release of mefloquine HCl.

Sign in / Sign up

Export Citation Format

Share Document