scholarly journals Bone Fractures Numerical Analysis in a Femur Affected by Osteogenesis Imperfecta

Children ◽  
2021 ◽  
Vol 8 (12) ◽  
pp. 1177
Author(s):  
Viridiana Ramírez-Vela ◽  
Luis Antonio Aguilar-Pérez ◽  
Juan Carlos Paredes-Rojas ◽  
Juan Alejandro Flores-Campos ◽  
Fernando ELi Ortiz-Hernández ◽  
...  
Keyword(s):  
Osteogenesis Imperfecta ◽  
Fracture Behavior ◽  
Bone Fractures ◽  
Three Dimensional ◽  
Central Zone ◽  
Element Model ◽  
Critical Force ◽  
Normal Walking ◽  
Non Invasive ◽  
Comminuted Fractures

This work presents a non-invasive methodology to obtain a three-dimensional femur model of three-year-old infants affected with Osteogenesis Imperfecta (OI) type III. DICOM® Files of a femur were processed to obtain a finite element model to assess the transverse, the oblique, and the comminuted fractures. The model is evaluated under a normal walking cycle. The loads applied were considered the most critical force generated on the normal walking cycle, and the analyses considered anisotropic bone conditions. The outcome shows stress concentration areas in the central zone of the diaphysis of the femur, and the highest levels of stress occur in the case of the comminuted fracture, while the transverse fracture presents the lowest values. Thus, the method can be helpful for determining the bone fracture behavior of certain pathologies, such as osteogenesis imperfecta, osteopenia, and osteoporosis.

scholarly journals Focality of the Induced E-Field Is a Contributing Factor in the Choice of TMS Parameters: Evidence from a 3D Computational Model of the Human Brain

2020 ◽  
Vol 10 (12) ◽  
pp. 1010
Author(s):  
Deepika Konakanchi ◽  
Amy L. de Jongh Curry ◽  
Robert S. Waters ◽  
Shalini Narayana
Keyword(s):  
Spatial Distribution ◽  
Three Dimensional ◽  
Fem Simulation ◽  
Element Model ◽  
Brain Areas ◽  
Invasive Approach ◽  
Non Invasive ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
The Impact

Transcranial magnetic stimulation (TMS) is a promising, non-invasive approach in the diagnosis and treatment of several neurological conditions. However, the specific results in the cortex of the magnitude and spatial distribution of the secondary electrical field (E-field) resulting from TMS at different stimulation sites/orientations and varied TMS parameters are not clearly understood. The objective of this study is to identify the impact of TMS stimulation site and coil orientation on the induced E-field, including spatial distribution and the volume of activation in the cortex across brain areas, and hence demonstrate the need for customized optimization, using a three-dimensional finite element model (FEM). A considerable difference was noted in E-field values and distribution at different brain areas. We observed that the volume of activated cortex varied from 3000 to 7000 mm3 between the selected nine clinically relevant coil locations. Coil orientation also changed the induced E-field by a maximum of 10%, and we noted the least optimal values at the standard coil orientation pointing to the nose. The volume of gray matter activated varied by 10% on average between stimulation sites in homologous brain areas in the two hemispheres of the brain. This FEM simulation model clearly demonstrates the importance of TMS parameters for optimal results in clinically relevant brain areas. The results show that TMS parameters cannot be interchangeably used between individuals, hemispheres, and brain areas. The focality of the TMS induced E-field along with its optimal magnitude should be considered as critical TMS parameters that should be individually optimized.

3D-Modeling and Numerical Analysis of Fracture Behavior in AFM-Specimen on Mixed-Mode I-II Loading Condition

2012 ◽  
Vol 450-451 ◽  
pp. 1391-1394
Author(s):  
Qing Fen Li ◽  
Li Zhu ◽  
Guo Jin ◽  
Xiu Fang Cui
Keyword(s):  
Mixed Mode ◽  
Loading Condition ◽  
Fracture Behavior ◽  
Computational Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Finite Geometry ◽  
Mode I ◽  
Release Rates ◽  
Energy Release Rates

The computational analysis of a three-dimensional (3D) finite element model of all fracture modes (AFM) specimen on mixed-mode I-II fracture was presented in this paper. The separated energy release rates (SERRs) along the crack front of the AFM-model were calculated by the modified virtual crack closure integral (MVCCI)-method and commercially available software ANSYS. The influence of finite geometry and loading angles on mixed mode I-II fracture was investigated.

X-ray microtomography

1988 ◽  
Vol 46 ◽  
pp. 998-999
Author(s):  
H.W. Deckman ◽  
B.F. Flannery ◽  
J.H. Dunsmuir ◽  
K.D' Amico
Keyword(s):  
Computed Tomography ◽  
Internal Structure ◽  
Imaging Technique ◽  
Three Dimensional ◽  
Tissue Structure ◽  
Individual Element ◽  
X Ray ◽  
Non Invasive ◽  
Panoramic Imaging ◽  
Three Dimensional Images

We have developed a new X-ray microscope which produces complete three dimensional images of samples. The microscope operates by performing X-ray tomography with unprecedented resolution. Tomography is a non-invasive imaging technique that creates maps of the internal structure of samples from measurement of the attenuation of penetrating radiation. As conventionally practiced in medical Computed Tomography (CT), radiologists produce maps of bone and tissue structure in several planar sections that reveal features with 1mm resolution and 1% contrast. Microtomography extends the capability of CT in several ways. First, the resolution which approaches one micron, is one thousand times higher than that of the medical CT. Second, our approach acquires and analyses the data in a panoramic imaging format that directly produces three-dimensional maps in a series of contiguous stacked planes. Typical maps available today consist of three hundred planar sections each containing 512x512 pixels. Finally, and perhaps of most import scientifically, microtomography using a synchrotron X-ray source, allows us to generate maps of individual element.

Three-dimensional speckle-tracking echocardiography – a further step in the non-invasive three-dimensional cardiac imaging

2012 ◽  
Vol 153 (40) ◽  
pp. 1570-1577 ◽  
Author(s):  
Attila Nemes ◽  
Anita Kalapos ◽  
Péter Domsik ◽  
Tamás Forster
Keyword(s):  
Cardiac Imaging ◽  
Speckle Tracking ◽  
Speckle Tracking Echocardiography ◽  
Three Dimensional ◽  
Myocardial Mechanics ◽  
Non Invasive ◽  
Imaging Methodology ◽  
Invasive Evaluation

Three-dimensional speckle-tracking echocardiography is a new cardiac imaging methodology, which allows three-dimensional non-invasive evaluation of the myocardial mechanics. The aim of this review is to present this new tool emphasizing its diagnostic potentials and demonstrating its limitations, as well. Orv. Hetil., 2012, 153, 1570–1577.

Torsional Analysis of a Steel Cord-Rubber Tire Belt Structure

1996 ◽  
Vol 24 (4) ◽  
pp. 339-348 ◽  
Author(s):  
R. M. V. Pidaparti
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Composite Structures ◽  
Three Dimensional ◽  
Element Model ◽  
Torsional Stiffness ◽  
Element Analysis ◽  
Rubber Belt ◽  
Steel Cord ◽  
Torsional Analysis

Abstract A three-dimensional (3D) beam finite element model was developed to investigate the torsional stiffness of a twisted steel-reinforced cord-rubber belt structure. The present 3D beam element takes into account the coupled extension, bending, and twisting deformations characteristic of the complex behavior of cord-rubber composite structures. The extension-twisting coupling due to the twisted nature of the cords was also considered in the finite element model. The results of torsional stiffness obtained from the finite element analysis for twisted cords and the two-ply steel cord-rubber belt structure are compared to the experimental data and other alternate solutions available in the literature. The effects of cord orientation, anisotropy, and rubber core surrounding the twisted cords on the torsional stiffness properties are presented and discussed.

Finite Element Analysis of Nonuniformity of Tires with Imperfections5

2007 ◽  
Vol 35 (3) ◽  
pp. 226-238 ◽  
Author(s):  
K. M. Jeong ◽  
K. W. Kim ◽  
H. G. Beom ◽  
J. U. Park
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Radial Force ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Dimensional Finite Element ◽  
Force Variation ◽  
Three Dimensional Finite Element

Abstract The effects of variations in stiffness and geometry on the nonuniformity of tires are investigated by using the finite element analysis. In order to evaluate tire uniformity, a three-dimensional finite element model of the tire with imperfections is developed. This paper considers how imperfections, such as variations in stiffness or geometry and run-out, contribute to detrimental effects on tire nonuniformity. It is found that the radial force variation of a tire with imperfections depends strongly on the geometrical variations of the tire.

Electrical Capacitance Volume Tomography (ECVT) for industrial and medical applications-An Overview

2015 ◽  
Vol 11 (1) ◽  
pp. 2897-2908
Author(s):  
Mohammed S.Aljohani
Keyword(s):  
Imaging Technique ◽  
Three Dimensional ◽  
Biological Processes ◽  
Electrical Capacitance ◽  
Image Reconstruction Techniques ◽  
Phase Dynamics ◽  
Non Invasive ◽  
Electrical Capacitance Volume Tomography ◽  
And Performance ◽  
Optimization And Performance

Tomography is a non-invasive, non-intrusive imaging technique allowing the visualization of phase dynamics in industrial and biological processes. This article reviews progress in Electrical Capacitance Volume Tomography (ECVT). ECVT is a direct 3D visualizing technique, unlike three-dimensional imaging, which is based on stacking 2D images to obtain an interpolated 3D image. ECVT has recently matured for real time, non-invasive 3-D monitoring of processes involving materials with strong contrast in dielectric permittivity. In this article, ECVT sensor design, optimization and performance of various sensors seen in literature are summarized. Qualitative Analysis of ECVT image reconstruction techniques has also been presented.

scholarly journals Comparison of Tooth- and Bone-Borne Appliances on the Stress Distributions and Displacement Patterns in the Facial Skeleton in Surgically Assisted Rapid Maxillary Expansion—A Finite Element Analysis (FEA) Study

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1152
Author(s):  
Rafał Nowak ◽  
Anna Olejnik ◽  
Hanna Gerber ◽  
Roman Frątczak ◽  
Ewa Zawiślak
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Model ◽  
Rapid Maxillary Expansion ◽  
Stress Distributions ◽  
Maxillary Expansion ◽  
Facial Skeleton ◽  
Element Analysis ◽  
Maxillary Constriction

The aim of this study was to compare the reduced stresses according to Huber’s hypothesis and the displacement pattern in the region of the facial skeleton using a tooth- or bone-borne appliance in surgically assisted rapid maxillary expansion (SARME). In the current literature, the lack of updated reports about biomechanical effects in bone-borne appliances used in SARME is noticeable. Finite element analysis (FEA) was used for this study. Six facial skeleton models were created, five with various variants of osteotomy and one without osteotomy. Two different appliances for maxillary expansion were used for each model. The three-dimensional (3D) model of the facial skeleton was created on the basis of spiral computed tomography (CT) scans of a 32-year-old patient with maxillary constriction. The finite element model was built using ANSYS 15.0 software, in which the computations were carried out. Stress distributions and displacement values along the 3D axes were found for each osteotomy variant with the expansion of the tooth- and the bone-borne devices at a level of 0.5 mm. The investigation showed that in the case of a full osteotomy of the maxilla, as described by Bell and Epker in 1976, the method of fixing the appliance for maxillary expansion had no impact on the distribution of the reduced stresses according to Huber’s hypothesis in the facial skeleton. In the case of the bone-borne appliance, the load on the teeth, which may lead to periodontal and orthodontic complications, was eliminated. In the case of a full osteotomy of the maxilla, displacements in the buccolingual direction for all the variables of the bone-borne appliance were slightly bigger than for the tooth-borne appliance.

scholarly journals Non-invasive three-dimensional thickness analysis of oral epithelium based on optical coherence tomography—development and diagnostic performance

Heliyon ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. e06645
Author(s):  
Charlotte Theresa Trebing ◽  
Sinan Sen ◽  
Stefan Rues ◽  
Christopher Herpel ◽  
Maria Schöllhorn ◽  
...  
Keyword(s):  
Optical Coherence Tomography ◽  
Diagnostic Performance ◽  
Three Dimensional ◽  
Oral Epithelium ◽  
Optical Coherence ◽  
Non Invasive

scholarly journals Vibration characteristics of triple-gear-rotor system in compressed air energy storage under variable torque load

2021 ◽  
Vol 104 (1) ◽  
pp. 003685042098705
Author(s):  
Xinran Wang ◽  
Yangli Zhu ◽  
Wen Li ◽  
Dongxu Hu ◽  
Xuehui Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Element Model ◽  
Rotor System ◽  
Dynamic Responses ◽  
System Response ◽  
Rotating Speed ◽  
Torque Load ◽  
Set Up ◽  
Two Stages

This paper focuses on the effects of the off-design operation of CAES on the dynamic characteristics of the triple-gear-rotor system. A finite element model of the system is set up with unbalanced excitations, torque load excitations, and backlash which lead to variations of tooth contact status. An experiment is carried out to verify the accuracy of the mathematical model. The results show that when the system is subjected to large-scale torque load lifting at a high rotating speed, it has two stages of relatively strong periodicity when the torque load is light, and of chaotic when the torque load is heavy, with the transition between the two states being relatively quick and violent. The analysis of the three-dimensional acceleration spectrum and the meshing force shows that the variation in the meshing state and the fluctuation of the meshing force is the basic reasons for the variation in the system response with the torque load. In addition, the three rotors in the triple-gear-rotor system studied show a strong similarity in the meshing states and meshing force fluctuations, which result in the similarity in the dynamic responses of the three rotors.

Sign in / Sign up

Export Citation Format

Share Document