scholarly journals Obtaining and Characterizing Thin Layers of Magnesium Doped Hydroxyapatite by Dip Coating Procedure

Coatings ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 510 ◽  
Author(s):  
Daniela Predoi ◽  
Simona Liliana Iconaru ◽  
Mihai Valentin Predoi ◽  
Mikael Motelica-Heino ◽  
Nicolas Buton ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antimicrobial Properties ◽  
Dip Coating ◽  
Thin Layers ◽  
Precipitation Method ◽  
Bacterial Strains ◽  
Antimicrobial Studies ◽  
Hydroxyapatite Coatings ◽  
Coating Procedure ◽  
Co Precipitation

A simple dip coating procedure was used to prepare the magnesium doped hydroxyapatite coatings. An adapted co-precipitation method was used in order to obtain a Ca25−xMgx(PO4)6(OH)2, 25MgHAp (xMg = 0.25) suspension for preparing the coatings. The stabilities of 25MgHAp suspensions were evaluated using ultrasound measurements, zeta potential (ZP), and dynamic light scattering (DLS). Using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) information at nanometric resolution regarding the shape and distribution of the 25MgHAp particles in suspension was obtained. The surfaces of obtained layers were evaluated using SEM and atomic force microscopy (AFM) analysis. The antimicrobial evaluation of 25MgHAp suspensions and coatings on various bacterial strains and fungus were realized. The present study presents important results regarding the physico-chemical and antimicrobial studies of the magnesium doped hydroxyapatite suspensions, as well as the coatings. The studies have shown that magnesium doped hydroxyapatite suspensions prepared with xMg = 0.25 presented a good stability and relevant antimicrobial properties. The coatings made using 25MgHAp suspension were homogeneous and showed remarkable antimicrobial properties. Also, it was observed that the layer realized has antimicrobial properties very close to those of the suspension. Both samples of the 25MgHAp suspensions and coatings have very good biocompatible properties.

scholarly journals Development of Iron-Doped Hydroxyapatite Coatings

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 186
Author(s):  
Daniela Predoi ◽  
Simona Liliana Iconaru ◽  
Steluta Carmen Ciobanu ◽  
Silviu-Adrian Predoi ◽  
Nicolas Buton ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Dip Coating ◽  
In Vitro Cytotoxicity ◽  
Precipitation Method ◽  
Chemical Compositions ◽  
Hydroxyapatite Coatings ◽  
Iron Doped ◽  
Xrd Patterns ◽  
Co Precipitation

It is known that iron is found as a trace element in bone tissue, the main inorganic constituent of which is hydroxyapatite. Therefore, iron-doped hydroxyapatite (HApFe) materials could be new alternatives for many biomedical applications. A facile dip coating process was used to elaborate the iron-doped hydroxyapatite (HApFe) nanocomposite coatings. The HApFe suspension used to prepare the coatings was achieved using a co-precipitation method, which was adapted in the laboratory. The quality of the HApFe suspension was assessed through dynamic light scattering (DLS), ultrasonic measurements, and zeta potential values. The hydroxyapatite XRD patterns were observed in the HApFe nanocomposite with no significant shifting of peak positions, thus suggesting that the incorporation of iron did not significantly modify the hydroxyapatite structure. The morphology of the HApFe nanoparticles was evaluated using transmission electron microscopy (TEM). Scanning electron microscopy (SEM) was used in order to investigate the morphologies of HApFe particles and coatings, while their chemical compositions were assessed using energy-dispersive X-ray spectroscopy (EDS). The SEM results suggested that the HApFe consists mainly of spherical nanometric particles and that the surfaces of the coatings are continuous and homogeneous. Additionally, the EDS spectra highlighted the purity of the samples and confirmed the presence of calcium, phosphorous, and iron in the analyzed sample. The in vitro cytotoxicity of the HApFe suspensions and coatings was evidenced using osteoblast cells. The MTT assay showed that both the HApFe suspensions and coatings exhibited biocompatible properties.

scholarly journals Pure and SrBa Dual Doped ZnO Nanoparticles Prepared by Co-precipitation Method and Their Structural, Optical and Antimicrobial Properties

2019 ◽  
Vol 11 (06) ◽  
Author(s):  
M Karthikeyan ◽  
A Jafar Ahamed ◽  
P Vijaya Kumar
Keyword(s):  
Antimicrobial Properties ◽  
Morphological Properties ◽  
Precipitation Method ◽  
Bacterial Strains ◽  
X Ray Diffraction ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno ◽  
Xrd Studies ◽  
Co Precipitation

The present investigation, the successful preparation of pure ZnO (Z1) NPs and SrBa dual doped ZnO (Z2) NPs by chemical co-precipitation technique without use of any capping agent. The structural and morphological properties of Z1 and Z2 NPs were analyzed using X-ray diffraction (XRD) studies, Field emission scanning electron microscopy (FESEM), Elemental analysis (EDAX), Fourier transform infrared spectroscopy (FTIR). An optical property was studied by UV–Vis spectroscopy and Photoluminescence (PL) spectra. The antimicrobial activity of Z1 and Z2 NPs has been investigated against Staphylococcus aureus and Klebsiella pneumoniae bacterial strains. It has been interestingly observed that Z2 NPs has enhanced the inhibitory activity than that of Z1 NPs against S. aureus and more efficiently than the K. pneumoniae bacterial strain.

Preparation and Characterization of Nanocomposite Calcium Doped Ceria Electrolyte With Alkali Carbonates (NK-CDC) for SOFC

2010 ◽  
Author(s):  
Ghazanfar Abbas ◽  
Rizwan Raza ◽  
Muhammad Ashraf Chaudhry ◽  
Bin Zhu
Keyword(s):  
Electron Microscopy ◽  
Fossil Fuels ◽  
Electrochemical Impedance ◽  
Renewable Energy Sources ◽  
Precipitation Method ◽  
Molar Ratio ◽  
Doped Ceria ◽  
Alternative Source ◽  
Calcium Doped ◽  
Co Precipitation

The entire world’s challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid Oxide Fuel Cells (SOFCs) are believed to be the best alternative source which converts chemical energy into electricity without combustion. Nanostructured study is required to develop highly ionic conductive electrolyte for SOFCs. In this work, the calcium doped ceria (Ce0.8Ca0.2O1.9) coated with 20% molar ratio of two alkali carbonates (CDC-M: MCO3, where M = Na and K) electrolyte was prepared by co-precipitation method in this study. Ni based electrode was used to fabricate the cell by dry pressing technique. The crystal structure and surface morphology was characterized by X-Ray Diffractometer (XRD), Scanning Electron Microscopy (SEM) and High Resolution Transmission Electron Microscopy (HRTEM). The particle size was calculated in the range of 10–20nm by Scherrer’s formula and compared with SEM and TEM results. The ionic conductivity was measured by using AC Electrochemical Impedance Spectroscopy (EIS) method. The activation energy was also evaluated. The performance of the cell was measured 0.567W/cm2 at temperature 550°C with hydrogen as a fuel.

scholarly journals Nitrogen and Bromide Co-Doped Hydroxyapatite Thin Films with Antimicrobial Properties

Coatings ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1505
Author(s):  
Simona Liliana Iconaru ◽  
Carmen Steluta Ciobanu ◽  
Daniela Predoi ◽  
Mikael Motelica-Heino ◽  
Constantin Cătălin Negrilă ◽  
...  
Keyword(s):  
Thin Films ◽  
Antimicrobial Activity ◽  
Spin Coating ◽  
Thin Layers ◽  
Precipitation Method ◽  
X Ray ◽  
Co Precipitation ◽  
First Time ◽  
Co Doped

Hydroxyapatite (Ca10(PO4)6(OH)2, HAp), due to its high biocompatibility, is widely used as biomaterial. Doping with various ions of hydroxyapatite is performed to acquire properties as close as possible to the biological apatite present in bones and teeth. In this research the results of a study performed on thin films of hydroxyapatite co-doped with nitrogen and bromine (NBrHAp) are presented for the first time. The NBrHAp suspension was obtained by performing the adapted co-precipitation method using cetyltrimethylammonium bromide (CTAB). The thin layers of NBrHAp were obtained by spin-coating. The stability of the NBrHAp suspension was examined by ultrasound measurements. The thin layers obtained by the spin-coating method were examined by scanning electron microscopy (SEM), optical microscopy (OM), and metallographic microscopy (MM). The presence of nitrogen and bromine were highlighted by energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) studies. Fourier transform infrared spectroscopy (FTIR) was used to highlight the chemical status of nitrogen and bromine. In addition, the powder obtained from the NBrHAp suspension was analyzed by XRD. Moreover, the in vitro antimicrobial activity of the NBrHAp suspensions and coatings was investigated using the reference microbial strains Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922, and Candida albicans ATCC 10231. The results highlighted the successful obtainment of N and Br co-doped hydroxyapatite suspension for the first time by an adapted co-precipitation method. The obtained suspension was used to produce pure NBrHAp composite thin films with superior morphological properties. The NBrHAp suspensions and coatings exhibited in vitro antimicrobial activity against bacterial and fungal strains and revealed their good antimicrobial activity.

scholarly journals Synthesis of Co3O4 Nano Aggregates by Co-precipitation Method and its Catalytic and Fuel Additive Applications

2019 ◽  
Vol 17 (1) ◽  
pp. 865-873 ◽  
Author(s):  
Muhammad Ramzan Saeed Ashraf Janjua
Keyword(s):  
Electron Microscopy ◽  
Precipitation Method ◽  
Fuel Additive ◽  
X Ray Diffraction ◽  
Efficient Catalyst ◽  
Calcination Process ◽  
Electron Microscopies ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Individual Particles

AbstractThe nano aggregates of cobalt oxide (Co3O4) are synthesized successfully by adopting simple a co precipitation approach. The product obtained was further subjected to the calcination process that not only changed it morphology but also reduces the size of individual particles of aggregates. The prepared nano aggregates are subjected to different characterization techniques such as electron microscopies (scanning electron microscopy and transmission electron microscopy) and X-ray diffraction and results obtained by these instruments are analyzed by different software. The characterization results show that, although the arrangement of particles is compact, several intrinsic spaces and small holes/ pores can also be seen in any aggregate of the product. The as synthesized product is further tested for catalytic properties in thermal decomposition of ammonium perchlorate and proved to be an efficient catalyst.

scholarly journals Bio-assisted preparation of efficiently architectured nanostructures of γ-Fe2O3 as a molecular recognition platform for simultaneous detection of biomarkers

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Sasikala Sundar ◽  
V. Ganesh
Keyword(s):  
Electron Microscopy ◽  
Iron Oxide ◽  
Photoelectron Spectroscopy ◽  
Simultaneous Detection ◽  
Differential Pulse ◽  
Precipitation Method ◽  
Limit Values ◽  
X Ray ◽  
Co Precipitation ◽  
The Individual

Abstract Magnetic nanoparticles of iron oxide (γ-Fe2O3) have been prepared using bio-assisted method and their application in the field of biosensors is demonstrated. Particularly in this work, different nanostructures of γ-Fe2O3 namely nanospheres (NS), nanograsses (NG) and nanowires (NW) are prepared using a bio-surfactant namely Furostanol Saponin (FS) present in Fenugreek seeds extract through co-precipitation method by following “green” route. Three distinct morphologies of iron oxide nanostructures possessing the same crystal structure, magnetic properties, and varied size distribution are prepared and characterized. The resultant materials are analyzed using field emission scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometer and Fourier transform infrared spectroscopy. Moreover, the effect of reaction time and concentration of FS on the resultant morphologies of γ-Fe2O3 nanostructures are systematically investigated. Among different shapes, NWs and NSs of γ-Fe2O3 are found to exhibit better sensing behaviour for both the individual and simultaneous electrochemical detection of most popular biomarkers namely dopamine (DA) and uric acid (UA). Electrochemical studies reveal that γ-Fe2O3 NWs showed better sensing characteristics than γ-Fe2O3 NSs and NGs in terms of distinguishable voltammetric signals for DA and UA with enhanced oxidation current values. Differential pulse voltammetric studies exhibit linear dependence on DA and UA concentrations in the range of 0.15–75 µM and 5 μM – 0.15 mM respectively. The detection limit values for DA and UA are determined to be 150 nM and 5 µM. In addition γ-Fe2O3 NWs modified electrode showed higher sensitivity, reduced overpotential along with good selectivity towards the determination of DA and UA even in the presence of other common interferents. Thus the proposed biosensor electrode is very easy to fabricate, eco-friendly, cheaper and possesses higher surface area suggesting the unique structural patterns of γ-Fe2O3 nanostructures to be a promising candidate for electrochemical bio-sensing and biomedical applications.

scholarly journals SERS activity of hybrid nano/microstructures Ag-Fe3O4 based on Dimorphotheca ecklonis pollen grains as bio-template

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
R. D. Ávila-Avilés ◽  
N. Torres-Gómez ◽  
M. A. Camacho-López ◽  
A. R. Vilchis-Nestor
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Pollen Grains ◽  
Precipitation Method ◽  
Chemical Composition Distribution ◽  
Transmission Electron ◽  
Pollen Surface ◽  
Surface Enhanced Raman ◽  
Enhanced Raman Scattering ◽  
Co Precipitation

Abstract Nature provides remarkable examples of mass-produced microscale particles with structures and chemistries optimized by evolution for particular functions. Synthetic chemical tailoring of such sustainable biogenic particles may be used to generate new multifunctional materials. Herein, we report a facile method for the synthesis of hybrid nano/microstructures Ag-Fe3O4 based on Dimorphotheca ecklonis pollen grains as bio-template. Silver nanoparticles was biosynthesized using pollen grains as a reduction and stabilization agent as well as a bio-template promoting the adhesion of silver nanoparticles to pollen surface. Fe3O4 nanoparticles were synthesized by co-precipitation method from FeSO4. Hybrid nano/microstructures Ag-Fe3O4 based on Dimorphotheca ecklonis pollen grains as bio-template were obtained and characterized using Scanning Electron Microscopy and Transmission Electron Microscopy to study the morphology and structure; Energy-Dispersive X-ray Spectroscopy to determine the chemical composition distribution; and Confocal Fluorescence Microscopy to demonstrate the fluorescence properties of hybrid nano-microstructures. Furthermore, these hybrid nano-microstructures have been studied by Surface-Enhanced Raman Scattering (SERS), using methylene blue as a target molecule; the hybrid nano-microstructures have shown 14 times signal amplification.

scholarly journals Characterization and Antibacterial Behavior of MgO-PEG Nanoparticles Synthesized via Co-Precipitation Method

2016 ◽  
Vol 70 ◽  
pp. 33-41
Author(s):  
V. Karthikeyan ◽  
S Dhanapandian ◽  
C Manoharan
Keyword(s):  
Electron Microscopy ◽  
Crystallite Size ◽  
Pathogenic Bacteria ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Diffusion Method ◽  
Average Crystalline Size ◽  
Chemical Compositions ◽  
Bacterial Strains ◽  
Size And Morphology

A surfactant assisted precipitation method is employed for the preparation of nanostructured magnesium oxide with flake-like nanoparticles. The influence of surfactant on the crystallite size and morphology of MgO was studied using various parameters. The synthesized MgO nanomaterials were characterized by using FTIR, XRD, FE-SEM and EDAX analytical techniques in order to evaluate the formation, crystalline phase morphologies, microstructures and chemical compositions. The powder X-ray power diffraction (XRD) analysis revealed the average crystalline size of 15.34 nm with cubic structure. The crystallite size increased with increasing amount of PEGs. Field Emission Scanning Electron Microscopy (FFSEM) and Transmission Electron Microscopy (TEM) showed that the surfactant strongly affect the size and morphology of nanostructure. Fourier-transform infrared spectroscopy studies indicated the formation of MgO with the characteristic vibration mode of Mg-O. Further, the antibacterial effect of MgO nanoparticles evaluated against pathogenic bacteria by agar diffusion method showed that the nanoparticles have reasonable antibacterial activity against both gram positive (S.aureus) and gram negative (E.coli) pathogenic bacterial strains and retains potential application in pharmaceutical and biomedical industries.

scholarly journals Investigation on Variables Contributing to the Synthesis of C-S-H/PCE Nanocomposites by Co-Precipitation Method

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7673
Author(s):  
Ziyang You ◽  
Jing Xu
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Precipitation Method ◽  
Synthesis Process ◽  
Orthogonal Experimental Design ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Ultra Fine Particle ◽  
Early Performance ◽  
Co Precipitation

The usage of nanoscale calcium silicate hydrate (nano C-S-H) proved to have an excellent promotion effect on the early performance of concrete as nano C-S-H with ultra-fine particle size can act as seeding for cement hydration. Therefore, it is of importance to tune the particle size during the synthesis process of nano C-S-H. In this paper, the influence of several variables of the particle size distribution (PSD) of nano C-S-H synthesized by chemical co-precipitation method with the aid of polycarboxylate (PCE) was studied by orthogonal experimental design. In addition, the composition, microstructure, and morphology of the C-S-H/PCE nanocomposites were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectrum. The results showed that the concentration of reactants had a significant impact on the PSD of C-S-H/PCE nanocomposites, followed by the dosage of dispersant. Ultrasonic treatment was effective in breaking the C-S-H/PCE aggregates with unstable agglomeration structures. The change in synthetic variables had a negligible effect on the composition of the C-S-H/PCE nanocomposites but had a significant influence on the crystallinity and morphology of the composites.

scholarly journals Electrochemical Performance of Lanthanum Cerium Ferrite Nanoparticles for Supercapacitor Applications

2021 ◽  
Author(s):  
Waseem Raza ◽  
Ghulam Nabi ◽  
Asim Shahzad ◽  
Nafisa Malik ◽  
Nadeem Raza
Keyword(s):  
Electron Microscopy ◽  
Electrode System ◽  
Ferrite Nanoparticles ◽  
Precipitation Method ◽  
Super Capacitor ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
First Time ◽  
Supercapacitor Applications

Abstract Lanthanum cerium ferrite nanoparticles has been synthesized for the first time via hydrothermal and co-precipitation method. The structural and morphological study of the nanoparticles have been examined by using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive x-ray spectroscopy (EDX). The electrochemical study of J1 and J2 electrodes have been examined using three electrode system in 6 M KOH electrolyte using cyclic voltammetry (CV), galvanostatic charging-discharging (GCD) and electrochemical impendence spectroscopy (EIS). The highest specific capacitance of 1195 F/g has been obtained at a scan rate of 10 mV/s from hydrothermal synthesis nanomaterial electrode (J2) and long cycling life 92.3% retention after 2000th cycles. Furthermore, the energy density and power density of the J2 electrode at a current density of 5 A/g was 59 Wh/kg and 9234 W/kg respectively. Hence, the fabricated J2 electrode is a favorable candidate for super-capacitor applications.

Sign in / Sign up

Export Citation Format

Share Document