scholarly journals Computational Modeling of Hybrid Sisko Nanofluid Flow over a Porous Radially Heated Shrinking/Stretching Disc

Coatings ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1242
Author(s):  
Umair Khan ◽  
Aurang Zaib ◽  
Anuar Ishak ◽  
Fahad S. Al-Mubaddel ◽  
Sakhinah Abu Bakar ◽  
...  
Keyword(s):  
Differential Equations ◽  
Flow Problem ◽  
Shear Thickening ◽  
Hybrid Nanofluid ◽  
Nanofluid Flow ◽  
Shear Thinning Fluids ◽  
Water Based ◽  
New Type ◽  
The Impact ◽  
The Magnetic Field

The present study reveals the behavior of shear-thickening and shear-thinning fluids in magnetohydrodynamic flow comprising the significant impact of a hybrid nanofluid over a porous radially shrinking/stretching disc. The features of physical properties of water-based Ag/TiO2 hybrid nanofluid are examined. The leading flow problem is formulated initially in the requisite form of PDEs (partial differential equations) and then altered into a system of dimensionless ODEs (ordinary differential equations) by employing suitable variables. The renovated dimensionless ODEs are numerically resolved using the package of boundary value problem of fourth-order (bvp4c) available in the MATLAB software. The non-uniqueness of the results for the various pertaining parameters is discussed. There is a significant enhancement in the rate of heat transfer, approximately 13.2%, when the impact of suction governs about 10% in the boundary layer. Therefore, the heat transport rate and the thermal conductivity are greater for the new type of hybrid nanofluid compared with ordinary fluid. The bifurcation of the solutions takes place in the problem only for the shrinking case. Moreover, the sketches show that the nanoparticle volume fractions and the magnetic field delay the separation of the boundarylayer.

scholarly journals Magnetohydrodynamic Hybrid Nanofluid Flow Past an Exponentially Stretching Sheet with Slip Conditions

Mathematics ◽  
2021 ◽  
Vol 9 (24) ◽  
pp. 3291
Author(s):  
Abdul Samad Khan ◽  
He-Yong Xu ◽  
Waris Khan
Keyword(s):  
Nusselt Number ◽  
Differential Equations ◽  
Skin Friction ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Slip Parameter ◽  
Nanofluid Flow ◽  
Slip Conditions ◽  
Exponentially Stretching ◽  
The Impact

This study presents the magnetized hybrid nanofluid flow with heat source/sink over an exponentially stretching/shrinking sheet. Slip conditions are implemented to analyze the hybrid nanofluid flow for both slip and no-slip conditions. Additionally, the hybrid nanofluid of alumina and copper (hybrid nanoparticles) with blood (base fluid) has been considered and discussed with both suction and injection parameters. The appropriate similarity variables are used to convert partial differential equations (PDEs) into ordinary differential equations (ODEs) and solved analytically with the help of the homotopy analysis method (HAM). The impact of different embedded parameters has been shown in the form of graphs and tables. The numerical values of skin friction and Nusselt number are presented in the form of Tables for both slip and no-slip cases. It is summarized that the upsurge of the velocity slip parameter and magnetic parameter increases the skin friction, while the rising of the thermal slip parameter and heat generation parameter decreases the Nusselt number.

Slip flow of hybrid nanofluid in presence of solar radiation

2021 ◽  
pp. 2250017
Author(s):  
Kalidas Das ◽  
Nilangshu Acharya ◽  
Md Tausif SK ◽  
Pinaki Ranjan Duari ◽  
Tanmoy Chakraborty
Keyword(s):  
Nusselt Number ◽  
Differential Equations ◽  
Slip Flow ◽  
Velocity Slip ◽  
Uniform Heat Flux ◽  
Hybrid Nanofluid ◽  
Nanofluid Flow ◽  
Fifth Order ◽  
The Impact ◽  
Final System

A theoretical model on MHD hybrid nanofluid flow in accordance with non-uniform heat flux and solar energy radiation has been studied in our work. Also, the impact of multiple slip conditions is presumed at the boundary. Comparative flow analyses for hybrid nanofluid (Al2O3/Cu–H2O) and single nanoparticle-based nanofluid (Cu–H2O) are addressed here with graphs and charts. The leading partial differential equations with boundary conditions have been converted into ordinary differential equations with the aid of similarity transformation. The final system is tackled via the fifth-order Runge–Kutta–Felberg method with shooting procedure and the computation is done using Maple 17. One of the interesting results shows that with the growth of thermal radiation, the Nusselt number for Cu–H2O is reduced by 26.16%, whereas for the same, Nusselt number for Al2O3/Cu–H2O is lessened by 27.38%. Fallout shows that with the growing values of velocity slip parameter, the thermal boundary layer thickness enlarges faster for Al2O3/Cu–H2O in comparison to Cu–H2O.

scholarly journals Approximate Analytical Analysis of Unsteady MHD Mixed Flow of Non-Newtonian Hybrid Nanofluid over a Stretching Surface

Fluids ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 138
Author(s):  
Ali Rehman ◽  
Zabidin Salleh
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Base Fluid ◽  
Research Work ◽  
Hybrid Nanofluid ◽  
Stretching Surface ◽  
Optimal Homotopy Analysis Method ◽  
Analytical Analysis ◽  
Transfer Ratio ◽  
The Impact

This paper analyses the two-dimensional unsteady and incompressible flow of a non-Newtonian hybrid nanofluid over a stretching surface. The nanofluid formulated in the present study is TiO2 + Ag + blood, and TiO2 + blood, where in this combination TiO2 + blood is the base fluid and TiO2 + Ag + blood represents the hybrid nanofluid. The aim of the present research work is to improve the heat transfer ratio because the heat transfer ratio of the hybrid nanofluid is higher than that of the base fluid. The novelty of the recent work is the approximate analytical analysis of the magnetohydrodynamics mixed non-Newtonian hybrid nanofluid over a stretching surface. This type of combination, where TiO2+blood is the base fluid and TiO2 + Ag + blood is the hybrid nanofluid, is studied for the first time in the literature. The fundamental partial differential equations are transformed to a set of nonlinear ordinary differential equations with the guide of some appropriate similarity transformations. The analytical approximate method, namely the optimal homotopy analysis method (OHAM), is used for the approximate analytical solution. The convergence of the OHAM for particular problems is also discussed. The impact of the magnetic parameter, dynamic viscosity parameter, stretching surface parameter and Prandtl number is interpreted through graphs. The skin friction coefficient and Nusselt number are explained in table form. The present work is found to be in very good agreement with those published earlier.

Hybrid nanofluid flow over a stretched cylinder with the impact of homogeneous–heterogeneous reactions and Cattaneo–Christov heat flux: Series solution and numerical simulation

Heat Transfer ◽  
2021 ◽  
Author(s):  
Anthonysamy John Christopher ◽  
Nanjundan Magesh ◽  
Ramanahalli Jayadevamurthy Punith Gowda ◽  
Rangaswamy Naveen Kumar ◽  
Ravikumar Shashikala Varun Kumar
Keyword(s):  
Numerical Simulation ◽  
Heat Flux ◽  
Series Solution ◽  
Heterogeneous Reactions ◽  
Hybrid Nanofluid ◽  
Nanofluid Flow ◽  
The Impact

scholarly journals Numerical Simulation of Heat Mass Transfer Effects on MHD Flow of Williamson Nanofluid by a Stretching Surface with Thermal Conductivity and Variable Thickness

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 684
Author(s):  
Saeed Islam ◽  
Haroon Ur Rasheed ◽  
Kottakkaran Sooppy Nisar ◽  
Nawal A. Alshehri ◽  
Mohammed Zakarya
Keyword(s):  
Thermal Conductivity ◽  
Boundary Layer ◽  
Mass Transfer ◽  
Differential Equations ◽  
Variable Thickness ◽  
Heat Mass Transfer ◽  
Mathematical Formulation ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
The Impact

The current analysis deals with radiative aspects of magnetohydrodynamic boundary layer flow with heat mass transfer features on electrically conductive Williamson nanofluid by a stretching surface. The impact of variable thickness and thermal conductivity characteristics in view of melting heat flow are examined. The mathematical formulation of Williamson nanofluid flow is based on boundary layer theory pioneered by Prandtl. The boundary layer nanofluid flow idea yields a constitutive flow laws of partial differential equations (PDEs) are made dimensionless and then reduce to ordinary nonlinear differential equations (ODEs) versus transformation technique. A built-in numerical algorithm bvp4c in Mathematica software is employed for nonlinear systems computation. Considerable features of dimensionless parameters are reviewed via graphical description. A comparison with another homotopic approach (HAM) as a limiting case and an excellent agreement perceived.

Thermally and chemically reacted MHD Maxwell nanofluid flow past an inclined permeable stretching surface

2021 ◽  
pp. 095440892110507
Author(s):  
Amar B. Patil ◽  
Vishwambhar S. Patil ◽  
Pooja P. Humane ◽  
Nalini S. Patil ◽  
Govind R. Rajput
Keyword(s):  
Differential Equations ◽  
Energy Transport ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
Linear Ordinary Differential Equations ◽  
Maxwell Nanofluid ◽  
Similarity Transformations ◽  
Flow Past ◽  
Chemically Reacting ◽  
The Impact

The present work deals with chemically reacting unsteady magnetohydrodynamic Maxwell nanofluid flow past an inclined permeable stretching surface embedded in a porous medium with thermal radiation. The formulated governing partial differential equations conveying the flow model of Maxwell with Buongiorno modeled nanofluid is transformed into the system of highly non-linear ordinary differential equations via suitable similarity transformations; those equations are transmuted into an initial value problem and then solved numerically by a shooting approach with Runge–-Kutta fourth-order schema. To obtain the physical insight of the flow situation, the influence of associated parameters on the velocity, temperature, and concentration profiles is sketched graphically with the aid of MATLAB software. Furthermore, engineering quantities of interest are interpreted graphically. The computed numerical results are compared to estimate the validity of the achieved results; it has been found out that the computed results are highly accurate. The impact of the Maxwell parameter and inclination angle of the sheet on the velocity field is observed in decaying. Both thermal and solutal energy transport are progressive in nature as the Maxwell parameter and thermophoresis parameter grows, and a reverse trend is observed for Prandtl number.

scholarly journals Nonlinear translational symmetric equilibria relevant to the L–H transition

2012 ◽  
Vol 79 (3) ◽  
pp. 257-265 ◽  
Author(s):  
Ap. KUIROUKIDIS ◽  
G. N. THROUMOULOPOULOS
Keyword(s):  
Magnetic Field ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Plasma Flow ◽  
Sufficient Condition ◽  
Sheared Flow ◽  
Equilibrium Configurations ◽  
Shafranov Equation ◽  
The Impact ◽  
The Magnetic Field

AbstractNonlinear z-independent solutions to a generalized Grad–Shafranov equation (GSE) with up to quartic flux terms in the free functions and incompressible plasma flow non-parallel to the magnetic field are constructed quasi-analytically. Through an ansatz, the GSE is transformed to a set of three ordinary differential equations and a constraint for three functions of the coordinate x, in Cartesian coordinates (x,y), which then are solved numerically. Equilibrium configurations for certain values of the integration constants are displayed. Examination of their characteristics in connection with the impact of nonlinearity and sheared flow indicates that these equilibria are consistent with the L–H transition phenomenology. For flows parallel to the magnetic field, one equilibrium corresponding to the H state is potentially stable in the sense that a sufficient condition for linear stability is satisfied in an appreciable part of the plasma while another solution corresponding to the L state does not satisfy the condition. The results indicate that the sheared flow in conjunction with the equilibrium nonlinearity plays a stabilizing role.

scholarly journals Thermal Analysis of 3D Electromagnetic Radiative Nanofluid Flow with Suction/Blowing: Darcy–Forchheimer Scheme

Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1395
Author(s):  
Hammad Alotaibi ◽  
Mohamed R. Eid
Keyword(s):  
Activation Energy ◽  
Differential Equations ◽  
Melt Spinning ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Brownian Diffusion ◽  
Force Coefficient ◽  
Catalytic Reactors ◽  
Nanofluid Flow ◽  
The Impact

This paper discusses the Darcy–Forchheimer three dimensional (3D) flow of a permeable nanofluid through a convectively heated porous extending surface under the influences of the magnetic field and nonlinear radiation. The higher-order chemical reactions with activation energy and heat source (sink) impacts are considered. We integrate the nanofluid model by using Brownian diffusion and thermophoresis. To convert PDEs (partial differential equations) into non-linear ODEs (ordinary differential equations), an effective, self-similar transformation is used. With the fourth–fifth order Runge–Kutta–Fehlberg (RKF45) approach using the shooting technique, the consequent differential system set is numerically solved. The influence of dimensionless parameters on velocity, temperature, and nanoparticle volume fraction profiles is revealed via graphs. Results of nanofluid flow and heat as well as the convective heat transport coefficient, drag force coefficient, and Nusselt and Sherwood numbers under the impact of the studied parameters are discussed and presented through graphs and tables. Numerical simulations show that the increment in activation energy and the order of the chemical reaction boosts the concentration, and the reverse happens with thermal radiation. Applications of such attractive nanofluids include plastic and rubber sheet production, oil production, metalworking processes such as hot rolling, water in reservoirs, melt spinning as a metal forming technique, elastic polymer substances, heat exchangers, emollient production, paints, catalytic reactors, and glass fiber production.

scholarly journals A Numerical Approach for an Unsteady Tangent Hyperbolic Nanofluid Flow past a Wedge in the Presence of Suction/Injection

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
U. Shahzad ◽  
M. Mushtaq ◽  
S. Farid ◽  
K. Jabeen ◽  
R.M.A. Muntazir
Keyword(s):  
Differential Equations ◽  
Graphical Representation ◽  
Numerical Technique ◽  
Darcy Number ◽  
Numerical Approach ◽  
Nanofluid Flow ◽  
Similarity Transformations ◽  
Flow Past ◽  
Layer Flow ◽  
The Impact

The analysis of unsteady tangent hyperbolic nanofluid flow past a wedge with injection-suction, because of its beneficial uses, has gained a lot of attention. The present study is mainly concerned with tangent hyperbolic nanofluid (non-Newtonian nanofluid). First, we have converted the system of partial differential equations (PDEs) to a system of ordinary differential equations (ODEs) with the help of appropriate similarity transformations. Boundary conditions are also transformed by utilizing suitable similarity transformation. Now, for the obtained ODEs, we have used the numerical technique bvp 4 c and investigated the velocity, temperature, and concentration profiles. The accuracy of the flow model is validated by applying MAPLE d-solve command having good agreement while comparing the numerical results obtained by bvp4c for both suction and injection cases. The effects of distinct dimensionless parameters on the various profiles are being analyzed. The novel features such as thermophoresis and Brownian motion are also discussed to investigate the characteristics of heat and mass transfer. Graphical representation of the impact of varying parameters and the solution method for the abovementioned model is thoroughly discussed. It was observed that suction or injection can play a key role in controlling boundary layer flow and brings stability in the flow. It was also noticed that by increasing the Darcy number, velocity profile increases in both injection-suction cases.

scholarly journals Influence of heat generation/absorption and stagnation point on polystyrene–TiO2/H2O hybrid nanofluid flow

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sadaf Masood ◽  
Muhammad Farooq ◽  
Aisha Anjum
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Stagnation Point ◽  
Entropy Generation ◽  
Heat Generation ◽  
Velocity Ratio ◽  
Hybrid Nanofluid ◽  
Engineering System ◽  
Nanofluid Flow ◽  
Homotopy Analysis

AbstractThis article focuses on hybrid nanofluid flow induced by stretched surface. The present context covers stagnation point flow of a hybrid nanofluid with the effect of heat generation/absorption. Currently most famous class of nanofluids is Hybrid nanofluid. It contains polystyrene and titanium oxide as a nanoparticles and water as a base fluid. First time attributes of heat transfer are evaluated by utilizing polystyrene–TiO2/H2O hybrid nanofluid with heat generation/absorption. Partial differential equations are converted into ordinary differential equation by using appropriate transformations for heat and velocity. Homotopy analysis method is operated for solution of ordinary differential equations. Flow and heat are disclosed graphically for unlike parameters. Resistive force and heat transfer rate is deliberated mathematically and graphically. It is deduced that velocity field enhanced for velocity ratio parameter whereas temperature field grows for heat generation/absorption coefficient. To judge the production of any engineering system entropy generation is also calculated. It is noticed that entropy generation grows for Prandtl number and Eckert number while it shows opposite behavior for temperature difference parameter.

Sign in / Sign up

Export Citation Format

Share Document