scholarly journals Propagation of Crystal Defects during Directional Solidification of Silicon via Induction of Functional Defects

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 90
Author(s):  
Patricia Krenckel ◽  
Yusuke Hayama ◽  
Florian Schindler ◽  
Theresa Trötschler ◽  
Stephan Riepe ◽  
...  
Keyword(s):  
Casting Process ◽  
Crystal Defects ◽  
Structural Defects ◽  
High Concentration ◽  
Material Quality ◽  
Dislocation Densities ◽  
Functional Defect ◽  
Very High ◽  
Functional Defects

The introduction of directional solidified cast mono silicon promised a combination of the cheaper production via a casting process with monocrystalline material quality, but has been struggling with high concentration of structural defects. The SMART approach uses functional defects to maintain the monocrystalline structure with low dislocation densities. In this work, the feasibility of the SMART approach is shown for larger ingots. A G2 sized crystal with SMART and cast mono silicon parts has been analyzed regarding the structural defects via optical analysis, crystal orientation, and etch pit measurements. Photoluminescence measurements on passivated and processed samples were used for characterization of the electrical material quality. The SMART approach has successfully resulted in a crystal with mono area share over 90% and a confinement of dislocation structures in the functional defect region over the whole ingot height compared to a mono area share of down to 50% and extending dislocation tangles in the standard cast mono Si. Cellular structures in photoluminescence measurements could be attributed to cellular dislocation patterns. The SMART Si material showed very high and most homogeneous lifetime values enabling solar cell efficiencies up to 23.3%.

Management and engineering solutions to improve stripping equipment efficiency in Chernogorksy open pit mine

2018 ◽  
pp. 36-48
Author(s):  
G. N. Shapovalenko ◽  
S. N. Radionov ◽  
V. V. Gorbunov ◽  
V. A. Khazhiev ◽  
V. Yu. Zalyadnov ◽  
...  
Keyword(s):  
Open Pit Mine ◽  
Open Pit ◽  
High Concentration ◽  
Open Pit Mines ◽  
Blasting Operation ◽  
Internal Dump ◽  
Mining Conditions ◽  
Mining Front ◽  
Comparison Of Equipment

Chernogosky open pit mine integrates truck-and-shovel system of mining with overburden rehandling to internal dump with a set of walking excavators for rehandling of overburden to mined-out area of the pit. It is possible to improve efficiency of stripping in the conditions of Chernogorsky OPM by reducing percentage of stripping with more expensive handling system. The relevant research and solutions to this effect are presented in this article. Comparative characterization of mining conditions and parameters of mining systems applied is given for open pit mines Chernogorsky, Turnui, Nazarovsky, Vostochno-Beisky and Izykh. The comparative analysis points at the need to account for difficulty of mining and process sites in comparison of equipment productivity. High concentration of mining machines, which is conditioned by narrow mining front and simultaneous operation of five faces, as well as blasting operation implemented every 1-2 days, are recognized as the main constraints of excavator capacity in mining with direct dumping in Chernogorsky open pit mine. The management and engineering solutions implemented in the mine and resulted in higher efficiency of draglines are described.

Ground water quality of selected areas of Punjab and Sind Provinces, Pakistan: Chemical and microbiological aspects

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Ionic Concentration ◽  
Chloride Ions ◽  
Potassium Ions ◽  
Ammonium Ions ◽  
High Concentration ◽  
Phosphate Ions ◽  
Sodium Magnesium ◽  
Very High ◽  
Microbiological Aspects

The assessment of groundwater is essential for the estimation of suitability of water for safe use. An attempt has been made to study the groundwater of selected areas of Punjab (Sheikhupura & Sahiwal) and Sindh (Sindh, Jawar Dharki and Dharki), Pakistan. The results indicate that pH, color and odor were all within limits of WHO that is pH ranges 6.5–8.5, colorless and odorless, respectively. The high values of suspended solids were observed in the Sindh-1 and Dharki samples. Microbiologically only Sahiwal and Jawar Dharki were found fit for drinking purpose. Trace metals analysis of Sheikhupura-1 and Sindh-1 showed that values do not fall within limits of WHO for Iron. The ionic concentration analysis showed that high bicarbonate (HCO3-), ions are present in the samples of Sahiwal and Dharki; Sindh-1 and Jawar Dharki samples showed very high concentration for chloride ions, all samples were satisfactory level for sulphate (SO42-), sodium, magnesium and phosphate ions except samples of Sindh-1 and Jawar Dharki. High concentration of calcium and potassium ions was observed in samples of Sindh-1, while all other samples were found fit for drinking purposes in respect of nitrate, nitrite and ammonium ions. The high concentration of Fluoride was found only in Sheikhupura-2 samples.

The Influence of Isothermal Annealing and Structural Defects on Properties of Amorphous Fe78Si11B11 with High Magnetization Saturation

2017 ◽  
Vol 68 (3) ◽  
pp. 478-482 ◽  
Author(s):  
Katarzyna Bloch
Keyword(s):  
Numerical Analysis ◽  
Thermal Treatment ◽  
Saturation Magnetization ◽  
Isothermal Annealing ◽  
Diffusion Processes ◽  
Structural Defects ◽  
High Saturation Magnetization ◽  
Magnetization Curves ◽  
Magnetization Saturation ◽  
Very High

This paper presents the results of numerical analysis of the primary magnetization curves, which were obtained under the assumptions of the theory of approach to ferromagnetic saturation described in by H. Kronm�ller. Test samples of the Fe78Si11B11 alloy were tape-shaped materials, which were subjected to isothermal annealing, not causing their crystallization. The investigated ribbons (tapes) were characterized by a very high saturation magnetization value of approximately 2T, which the thermal treatment has increased by about 10%. It was found that reason for the change of saturation magnetization of the investigated samples was the local rearrangement of atoms due to diffusion processes leading to the release of free volumes to the surface and combining of them into larger unstable defects called pseudodislocational dipoles.

scholarly journals Microstructure and Thermoelectric Properties of (Bi0.48Sb1.52)Te3 Thick Films Prepared with Tape Casting Method

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 140
Author(s):  
Lichen Liu ◽  
Ziping Cao ◽  
Min Chen ◽  
Jun Jiang
Keyword(s):  
Thermoelectric Properties ◽  
Low Cost ◽  
Thick Films ◽  
Tape Casting ◽  
Casting Process ◽  
Casting Method ◽  
Glass Substrates ◽  
Conductive Films ◽  
Casting Technology

This paper reports the fabrication and characterization of (Bi0.48Sb1.52)Te3 thick films using a tape casting process on glass substrates. A slurry of thermoelectric (Bi0.48Sb1.52)Te3 was developed and cured thick films were annealed in a vacuum chamber at 500–600 °C. The microstructure of these films was analyzed, and the Seebeck coefficient and electric conductivity were tested. It was found that the subsequent annealing process must be carefully designed to achieve good thermoelectric properties of these samples. Conductive films were obtained after annealing and led to acceptable thermoelectric performance. While the properties of these initial materials are not at the level of bulk materials, this work demonstrates that the low-cost tape casting technology is promising for fabricating thermoelectric modules for energy conversion.

scholarly journals Focused ultrasound in neuro-oncology: the role of the Focused Ultrasound Foundation in driving adoption and innovation

2021 ◽  
Author(s):  
Emily C. Whipple ◽  
Camille A. Favero ◽  
Neal F. Kassell
Keyword(s):  
Drug Delivery ◽  
Brain Tumors ◽  
Focused Ultrasound ◽  
Clinical Evidence ◽  
Neurological Injury ◽  
High Concentration ◽  
Potential Applications ◽  
Tumor Agent

Abstract Introduction Intra-arterial (lA) delivery of therapeutic agents across the blood-brain barrier (BBB) is an evolving strategy which enables the distribution of high concentration therapeutics through a targeted vascular territory, while potentially limiting systemic toxicity. Studies have demonstrated lA methods to be safe and efficacious for a variety of therapeutics. However, further characterization of the clinical efficacy of lA therapy for the treatment of brain tumors and refinement of its potential applications are necessary. Methods We have reviewed the preclinical and clinical evidence supporting superselective intraarterial cerebral infusion (SSJACI) with BBB disruption for the treatment of brain tumors. In addition, we review ongoing clinical trials expanding the applicability and investigating the efficacy of lA therapy for the treatment of brain tumors. Results Trends in recent studies have embraced the use of SSIACI and less neurotoxic chemotherapies. The majority of trials continue to use mannitol as the preferred method of hyperosmolar BBB disruption. Recent preclinical and preliminary human investigations into the lA delivery of Bevacizumab have demonstrated its safety and efficacy as an anti-tumor agent both alone and in combination with chemotherapy. Conclusion lA drug delivery may significantly affect the way treatment are delivered to patients with brain tumors, and in particular GBM. With refinement and standardization of the techniques of lA drug delivery, improved drug selection and formulations, and the development of methods to minimize treatment-related neurological injury, lA therapy may offer significant benefits for the treatment of brain tumors.

Ionized gas kinematics and luminosity profiles of Low-z Lyman Alpha Blobs

2019 ◽  
Vol 15 (S359) ◽  
pp. 413-414
Author(s):  
María P. Agüero ◽  
Rubén Díaz ◽  
Mischa Schirmer
Keyword(s):  
Emission Line ◽  
Galactic Nuclei ◽  
Host Galaxies ◽  
Ionized Gas ◽  
Lyman Alpha ◽  
Gas Kinematics ◽  
The Universe ◽  
Very High ◽  
The Continuum

AbstractThis work is focused on the characterization of the Seyfert-2 galaxies hosting very large, ultra-luminous narrow-line regions (NLRs) at redshifts z = 0.2−0.34. With a space density of 4.4 Gcp−3 at z ∼ 0.3, these “Low Redshift Lyman-α Blob” (LAB) host galaxies are amongst the rarest objects in the universe, and represent an exceptional and short-lived phenomenon in the life cycle of active galactic nuclei (AGNs). We present the study of GMOS spectra for 13 LAB galaxies covering the rest frame spectral range 3700–6700 Å. Predominantly, the [OIII]λ5007 emission line radial distribution is as widespread as that of the continuum one. The emission line profiles exhibit FWHM between 300–700 Km s−1. In 7 of 13 cases a broad kinematical component is detected with FWHM within the range 600–1100 Km s−1. The exceptionally high [OIII]λ5007 luminosity is responsible for very high equivalent width reaching 1500 Å at the nucleus.

scholarly journals Near quantitative synthesis of urea macrocycles enabled by bulky N-substituent

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Yingfeng Yang ◽  
Hanze Ying ◽  
Zhixia Li ◽  
Jiang Wang ◽  
Yingying Chen ◽  
...  
Keyword(s):  
High Efficiency ◽  
Molecular Structures ◽  
High Yield ◽  
Kinetic Control ◽  
High Concentration ◽  
Weak Association ◽  
Quantitative Synthesis ◽  
Thermodynamic Stabilization ◽  
Discrete Structures ◽  
Very High

AbstractMacrocycles are unique molecular structures extensively used in the design of catalysts, therapeutics and supramolecular assemblies. Among all reactions reported to date, systems that can produce macrocycles in high yield under high reaction concentrations are rare. Here we report the use of dynamic hindered urea bond (HUB) for the construction of urea macrocycles with very high efficiency. Mixing of equal molar diisocyanate and hindered diamine leads to formation of macrocycles with discrete structures in nearly quantitative yields under high concentration of reactants. The bulky N-tert-butyl plays key roles to facilitate the formation of macrocycles, providing not only the kinetic control due to the formation of the cyclization-promoting cis C = O/tert-butyl conformation, but also possibly the thermodynamic stabilization of macrocycles with weak association interactions. The bulky N-tert-butyl can be readily removed by acid to eliminate the dynamicity of HUB and stabilize the macrocycle structures.

Small-volume vitrification and rapid warming yield high survivals of one-cell rat embryos in cryotubes

2021 ◽  
Author(s):  
Yasuyoshi Fukuda ◽  
Misako Higashiya ◽  
Takahiro Obata ◽  
Keita Basaki ◽  
Megumi Yano ◽  
...  
Keyword(s):  
Cooling Rate ◽  
Small Volume ◽  
Sucrose Solution ◽  
High Concentration ◽  
Rat Embryos ◽  
Low Concentrations ◽  
Intracellular Ice Formation ◽  
Intracellular Ice ◽  
Warming Rate ◽  
Very High

Abstract To cryopreserve cells, it is essential to avoid intracellular ice formation during cooling and warming. One way to achieve this is to convert the water inside the cells into a non-crystalline glass. It is currently believed that to accomplish this vitrification, the cells must be suspended in a very high concentration (20–40%) of a glass-inducing solute, and subsequently cooled very rapidly. Herein, we report that this belief is erroneous with respect to the vitrification of one-cell rat embryos. In the present study, one-cell rat embryos were vitrified with 5 μL of EFS10 (a mixture of 10% ethylene glycol, 27% Ficoll, and 0.45 M sucrose) in cryotubes at a moderate cooling rate, and warmed at various rates. Survival was assessed according to the ability of the cells to develop into blastocysts and to develop to term. When embryos were vitrified at a 2,613 °C/min cooling rate and thawed by adding 1 mL of sucrose solution (0.3 M, 50 °C) at a warming rate of 18,467 °C/min, 58.1 ± 3.5% of the EFS10-vitrified embryos developed into blastocysts, and 50.0 ± 4.7% developed to term. These rates were similar to those of non-treated intact embryos. Using a conventional cryotube, we achieved developmental capabilities in one-cell rat embryos by rapid warming that were comparable to those of intact embryos, even using low concentrations (10%) of cell-permeating cryoprotectant and at low cooling rates.

scholarly journals Halogenated Volatile Organic Compounds in Water Samples and Inorganic Elements Levels in Ores for Characterizing a High Anthropogenic Polluted Area in the Northern Latium Region (Italy)

2021 ◽  
Vol 18 (4) ◽  
pp. 1628
Author(s):  
Mario Vincenzo Russo ◽  
Ivan Notardonato ◽  
Alberto Rosada ◽  
Giuseppe Ianiri ◽  
Pasquale Avino
Keyword(s):  
Organic Compounds ◽  
Mean Value ◽  
Greenhouse Crops ◽  
River Waters ◽  
Liquid Liquid Extraction ◽  
Volatile Organic ◽  
High Concentrations ◽  
Very High ◽  
Inorganic Fraction

This paper shows a characterization of the organic and inorganic fraction of river waters (Tiber and Marta) and ores/soil samples collected in the Northern Latium region of Italy for evaluating the anthropogenic/natural source contribution to the environmental pollution of this area. For organic compounds, organochloride volatile compounds in Tiber and Marta rivers were analyzed by two different clean-up methods (i.e., liquid–liquid extraction and static headspace) followed by gas chromatography–electron capture detector (GC-ECD) analysis. The results show very high concentrations of bromoform (up to 1.82 and 3.2 µg L−1 in Tiber and Marta rivers, respectively), due to the presence of greenhouse crops, and of chloroform and tetrachloroethene, due to the presence of handicrafts installations. For the qualitative and quantitative assessment of the inorganic fraction, it is highlighted the use of a nuclear analytical method, instrumental neutron activation analysis, which allows having more information as possible from the sample without performing any chemical-physical pretreatment. The results have evidenced high levels of mercury (mean value 88.6 µg g−1), antimony (77.7 µg g−1), strontium (12,039 µg g−1) and zinc (103 µg g−1), whereas rare earth elements show levels similar to the literature data. Particular consideration is drawn for arsenic (414 µg g−1): the levels found in this paper (ranging between 1 and 5100 µg g−1) explain the high content of such element (as arsenates) in the aquifer, a big issue in this area.

Sign in / Sign up

Export Citation Format

Share Document