scholarly journals A Long-Range 2.4G Network System and Scheduling Scheme for Aquatic Environmental Monitoring

Electronics ◽  
2019 ◽  
Vol 8 (8) ◽  
pp. 909 ◽  
Author(s):  
Zheng Zhang ◽  
Shouqi Cao ◽  
Yuntengyao Wang

Wireless communications for applications of inshore fishery and large area aquatic environmental monitoring are really challenging, due to the characteristics of a long monitoring period, large coverage area, and adverse transmission conditions. Recently, LPWAN (low-power wide-area network) became the new solution to address these challenges, due to its long transmission distance and low power consumption of end-nodes. In this paper, we designed a novel network system for aquatic environmental monitoring, based on long-range 2.4G technology, which consisted of a low cost dual-channel gateway and end-nodes. A DMSF (dual-channel multiple spreading factors)–TDMA (time division multiple access) MAC (medium access control) scheme for this system was proposed, which largely reduces the channel collision probability, and improves the real-time for urgent data and the average lifetime of end-nodes. We verified the applicability of the long-range 2.4G technology in an aquatic environment, by point-to-point communication experiments over lake water. The performance evaluation and analysis of DMSF–TDMA is presented through simulations, and comparison with other existing schemes. The results demonstrated the benefit of our proposed scheme, in terms of the packet delivery rate, delay, and energy consumption.

2021 ◽  
Author(s):  
Evjola Spaho ◽  
Aleksandër Biberaj ◽  
Ares Tahiraga

AbstractRecently, low power wide area networks are attracting a lot of attention by the research community. They are wireless technologies characterized by large coverage area, low bandwidth and long battery life. One of these low power wide area networks technologies, the long range wide area network, can be used for different monitoring applications for health, agriculture, traffic, smart city.In this paper, different simulations and experiments are conducted to implement a low-cost long-range wide area network environmental monitoring application for Tirana city in Albania. Simulation and experimental data are compared and similar results were obtained. In the low-cost implemented system, the gateway can communicate with the sensors placed in strategic positions with long distance covered also using Radio Mobile software.


Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1008 ◽  
Author(s):  
Seungku Kim ◽  
Heonkook Lee ◽  
Sungho Jeon

When the low power wide area network (LPWAN) was developed for the internet of things (IoT), it attracted significant attention. LoRa, which is one of the LPWAN technologies, provides low-power and long-range wireless communication using a frequency band under 1 GHz. A long-range wide area network (LoRaWAN) provides a simple star topology network that is not scalable; it supports multi-data rates by adjusting the spreading factor, code rate, and bandwidth. This paper proposes an adaptive spreading factor selection scheme for corresponding spreading factors (SFs) between a transmitter and receiver. The scheme enables the maximum throughput and minimum network cost, using cheap single channel LoRa modules. It provides iterative SF inspection and an SF selection algorithm that allows each link to communicate at independent data rates. We implemented a multi-hop LoRa network and evaluated the performance of experiments in various network topologies. The adaptive spreading factor selection (ASFS) scheme showed outstanding end-to-end throughput, peaking at three times the performance of standalone modems. We expect the ASFS scheme will be a suitable technology for applications requiring high throughput on a multi-hop network.


2021 ◽  
Vol 12 (1) ◽  
pp. 1
Author(s):  
Filip Turčinović ◽  
Gordan Šišul ◽  
Marko Bosiljevac

Low Power Wide Area Network (LPWAN) technologies provide long-range and low power consumption for many battery-powered devices used in Internet of Things (IoT). One of the most utilized LPWAN technologies is LoRaWAN (Long Range WAN) with over 700 million connections expected by the year 2023. LoraWAN base stations need to ensure stable and energy-efficient communication without unnecessary repetitions with sufficient range coverage and good capacity. To meet these requirements, a simple and efficient upgrade in the design of LoRaWAN base station is proposed, based on using two or more concentrators. The development steps are outlined in this paper and the evaluation of the enhanced base station is done with a series of measurements conducted in Zagreb, Croatia. Through these measurements we compared received messages and communication parameters on novel and standard base stations. The results showed a significant increase in the probability of successful reception of messages on the novel base station which corresponds to the increase of base station capacity and can be very beneficial for the energy consumption of most LoRaWAN end devices.


2019 ◽  
Vol 8 (3) ◽  
pp. 941-950 ◽  
Author(s):  
Nurul Afifah Binti Masadan ◽  
Mohamed Hadi Habaebi ◽  
Siti Hajar Yusoff

Long Range Low Power Wide Area Network (LoRa LPWAN) technology is unique and remarkable technology because of its long-range coverage, low power consumption and low cost system architecture. These features have allowed Lora LPWAN to become a favorable option for performing communication in most of IoT wireless applications. In this paper, the foliage effect has been studied in terms of attenuation and its overall contribution to the path-loss and link budget calculations. Specifically, 5 tree types were studied and their contribution to the path loss were quantified for different path crossings (e.g., trunk, tree-top and branches). The trees are Licuala Grandis, Mimusops Elengi, Mangifera Indica, Cyrtostachys Renda and Livistona Chinensis. Mimusops Elengi tree gave the strongest mean foliage attenuation accumulating up to 20 dB, due to its big size and crown density. Trunks contribute even higher attenuation in comparison to tree-tops and branches. The Okumura/Hata, Log-normal shadowing and foliage models are used as references for this propagation models development in this paper. Our study showed that Okumura fails to capture the effect of foliage in an environment rich in trees and biodiversity. This demonstrates the need for considering the tropical environment where the characterization of foliage attenuation plays an important role in determining the propagation model path-loss and link budget needed for network design and planning.


2021 ◽  
pp. 581-587
Author(s):  
R. F. Manrique Balmaceda ◽  
Ricardo Vázquez-Martín ◽  
J. Bravo Arraba ◽  
Juan Jesús Fernández-Lozano ◽  
Alfonso García-Cerezo

Los sistemas de comunicación entre nodos sensores y los equipos de búsqueda y rescate presentan posibles vulnerabilidades ante emergencias o catástrofes, como el fallo de la infraestructura del sistema o la saturación de la red. Por ello, es necesario evaluar alternativas para garantizar la disponibilidad del sistema y los datos necesarios para la estrategia del equipo. Los requerimientos de una red de largo alcance y bajo consumo apuntan a evaluar las distintas tecnologías que engloban las redes LPWAN (Low Power, Wide Area Network). Entre ellas, destaca el protocolo LoRaWAN (Long Range, Wide Area Network) por ofrecer una flexibilidad operativa que no tienen los demás. De lado del hardware, se realizó una selección de componentes abiertos para los nodos sensores y el gateway. Para conseguir una red ad-hoc se ha usado el proyecto ChirpStack como servidor de red y de aplicación. Finalmente, se ha integrado el software de aplicación QGIS con la base de datos PostgreSQL que almacena los datos en la misma tarjeta host del gateway. El sistema fue probado en las XV Jornadas Internacionales de la Universidad de Málaga sobre Seguridad, Emergencias y Catástrofes. El código y la documentación del sistema presentado en este artículo está disponible en https://github.com/jjflozano/BackUpCommLoRa.


2021 ◽  
Vol 5 (1) ◽  
pp. 5
Author(s):  
Mohammad Al mojamed

A long-range wide-area network (LoRaWAN) targets both mobile and static Internet of Things (IoT) applications; it is suited to IoT applications, which require a large coverage area while consuming less power at a low data rate; it provides a solution for transferring data between IoT devices with a minimum cost in terms of power, at the expense of higher latency. LoRaWAN was designed for static low-power long-range networks. However, several IoT solution applications involve the use of mobility. Therefore, this study investigates the usage of LoRaWAN in the field of mobile Internet of Things applications such as bike rentals, fleet monitoring, and wildlife and animal tracking applications. Using the OMNeT++ simulator, two different well-known mobility models are used to investigate the influence of mobility on the performance of mobile LoRaWAN. The results show that intense LoRaWAN networks can operate under a high velocity and varying traffic load. It can be observed that the random waypoint model combination yields a better performance, but at the cost of higher collisions and energy consumption. As a consequence, the results suggest the reconsideration of mobile IoT solutions over LoRaWAN.


Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4723 ◽  
Author(s):  
Muhammad Asad Ullah ◽  
Junnaid Iqbal ◽  
Arliones Hoeller ◽  
Richard Souza ◽  
Hirley Alves

Low-power wide-area networks (LPWANs) are emerging rapidly as a fundamental Internet of Things (IoT) technology because of their low-power consumption, long-range connectivity, and ability to support massive numbers of users. With its high growth rate, Long-Range (LoRa) is becoming the most adopted LPWAN technology. This research work contributes to the problem of LoRa spreading factor (SF) allocation by proposing an algorithm on the basis of K-means clustering. We assess the network performance considering the outage probabilities of a large-scale unconfirmed-mode class-A LoRa Wide Area Network (LoRaWAN) model, without retransmissions. The proposed algorithm allows for different user distribution over SFs, thus rendering SF allocation flexible. Such distribution translates into network parameters that are application dependent. Simulation results consider different network scenarios and realistic parameters to illustrate how the distance from the gateway and the number of nodes in each SF affects transmission reliability. Theoretical and simulation results show that our SF allocation approach improves the network’s average coverage probability up to 5 percentage points when compared to the baseline model. Moreover, our results show a fairer network operation where the performance difference between the best- and worst-case nodes is significantly reduced. This happens because our method seeks to equalize the usage of each SF. We show that the worst-case performance in one deployment scenario can be enhanced by 1 . 53 times.


2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
J.-M. Martinez-Caro ◽  
M.-D. Cano

Nowadays, the popularity of the unmanned aerial vehicles (UAVs) is high, and it is expected that, in the next years, the implementation of UAVs in day-to-day service will be even greater. These new implementations make use of novel technologies encompassed under the term Internet of Things (IoT). One example of these technologies is Long-Range (LoRa), classified as a Low-Power Wide-Area Network (LPWAN) with low-cost, low-power consumption, large coverage area, and the possibility of a high number of connected devices. One fundamental part of a proper UAV-based IoT service deployment is performance evaluation. However, there is no standardized methodology for assessing the performance in these scenarios. This article presents a case study of an integrated UAV-LoRa system employed for air-quality monitoring. Each UAV is equipped with a set of sensors to measure several indicators of air pollution. In addition, each UAV also incorporates an embedded LoRa node for communication purposes. Given that mobility is key when evaluating the performance of these types of systems, we study eight different mobility models, focusing on the effect that the number of UAVs and their flying speed have on system performance. Through extensive simulations, performance is evaluated via multiple quality dimensions, encompassing the whole process from data acquisition to user experience. Results show that our performance evaluation methodology allows a complete understanding of the operation, and for this specific case study, the mobility model with the best performance is Pathway because the LoRa nodes are distributed and move orderly throughout the coverage area.


2017 ◽  
Vol 9 (4) ◽  
pp. 627 ◽  
Author(s):  
Byoungwook Kim ◽  
Kwang-il Hwang

Sign in / Sign up

Export Citation Format

Share Document