scholarly journals An Optimum Design of Clocked AC-DC Charge Pump Circuits for Vibration Energy Harvesting

Electronics ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 2031
Author(s):  
Jinming Ye ◽  
Toru Tanzawa
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Charge Pump ◽  
Design Flow ◽  
Design Parameters ◽  
Vibration Energy ◽  
Output Current ◽  
Vibration Energy Harvesting ◽  
Wide Range ◽  
Target Output

This paper shows how clocked AC-DC charge pump circuits can be optimally designed to have the minimum circuit area for small form factor vibration energy harvesting. One can determine an optimum number of stages with simple equations and then determine the capacitance of each pump capacitor to have a target output current at a target output voltage. The equations were verified under a wide range of design parameters by comparing the output current with the simulated one. The output current of the circuit designed by the equations was in good agreement with the simulated result, to within 5% for 98% of the 1600 designs with different parameters. We also propose a design flow to help designers determine the initial design parameters of a clocked AC-DC charge pump circuit (i.e., the number of stages, capacitance per stage, and the total size of rectifying devices) under the condition that the saturation current of a unit of the rectifying device, clock frequency, amplitude of the voltage generated by the energy transducer, target output voltage, and target output current are given. SPICE simulation results validated theoretical results with an error of 3% in terms of the output current when a clocked AC-DC charge pump was designed to output current of 1 μA at 2.5 V from a vibration energy harvester with an AC voltage amplitude of 0.5 V.

scholarly journals FINITE ELEMENT SIMULATION OF MEMS PIEZOELECTRIC ENERGY SCAVENGER BASED ON PZT THIN FILM

2019 ◽  
Vol 20 (1) ◽  
pp. 90-99
Author(s):  
Aliza Aini Md Ralib ◽  
Nur Wafa Asyiqin Zulfakher ◽  
Rosminazuin Ab Rahim ◽  
Nor Farahidah Za'bah ◽  
Noor Hazrin Hany Mohamad Hanif
Keyword(s):  
Thin Film ◽  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Maximum Output Power ◽  
Vibration Energy ◽  
Maximum Output ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
The World

Vibration energy harvesting has been progressively developed in the advancement of technology and widely used by a lot of researchers around the world. There is a very high demand for energy scavenging around the world due to it being cheaper in price, possibly miniaturized within a system, long lasting, and environmentally friendly. The conventional battery is hazardous to the environment and has a shorter operating lifespan. Therefore, ambient vibration energy serves as an alternative that can replace the battery because it can be integrated and compatible to micro-electromechanical systems. This paper presents the design and analysis of a MEMS piezoelectric energy harvester, which is a vibration energy harvesting type. The energy harvester was formed using Lead Zicronate Titanate (PZT-5A) as the piezoelectric thin film, silicon as the substrate layer and structural steel as the electrode layer. The resonance frequency will provide the maximum output power, maximum output voltage and maximum displacement of vibration. The operating mode also plays an important role to generate larger output voltage with less displacement of cantilever. Some designs also have been studied by varying height and length of piezoelectric materials. Hence, this project will demonstrate the simulation of a MEMS piezoelectric device for a low power electronic performance. Simulation results show PZT-5A piezoelectric energy with a length of 31 mm and height of 0.16 mm generates maximum output voltage of 7.435 V and maximum output power of 2.30 mW at the resonance frequency of 40 Hz. ABSTRAK: Penuaian tenaga getaran telah berkembang secara pesat dalam kemajuan teknologi dan telah digunakan secara meluas oleh ramai penyelidik di seluruh dunia. Terdapat permintaan yang sangat tinggi di seluruh dunia terhadap penuaian tenaga kerana harganya yang lebih murah, bersaiz kecil dalam satu sistem, tahan lama dan mesra alam. Manakala, bateri konvensional adalah berbahaya bagi alam sekitar dan mempunyai jangka hayat yang lebih pendek. Oleh itu, getaran tenaga dari persekitaran lebih sesuai sebagai alternatif kepada bateri kerana ia mudah diintegrasikan dan serasi dengan sistem mikroelektromekanikal. Kertas kerja ini  membentangkan reka bentuk dan analisis tenaga piezoelektrik MEMS iaitu salah satu jenis penuaian tenaga getaran. Penuai tenaga ini dibentuk menggunakan Lead Zicronate Titanate (PZT-5A) sebagai lapisan filem tipis piezoelektrik, silikon sebagai lapisan substrat dan keluli struktur sebagai lapisan elektrod. Frekuensi resonans akan memberikan hasil tenaga maksima, voltan tenaga maksima dan getaran jarak maksima. Mod pengendalian juga memainkan peranan penting bagi menghasilkan tenaga yang lebih besar. Reka bentuk yang mempunyai ketinggian dan panjang berlainan juga telah diuji dengan menggunakan bahan piezoelektrik yang sama. Oleh itu, projek ini akan menghasilkan simulasi piezoelektrik MEMS yang sesuai digunakan bagi alat elektronik berkuasa rendah. Hasil simulasi menunjukkan dengan panjang 31 mm dan ketinggian 0.16 mm, piezoelektrik PZT ini menghasilkan voltan maksima sebanyak 7.435 V dan tenaga output maksima 2.30 mW pada frekuensi resonans 40 Hz.

Design and Simulation Analysis of Vibration Energy Harvesting System Based on ADAMS

2019 ◽  
Author(s):  
Ziheng Zhu ◽  
Lin Xu ◽  
Mohamed A. A. Abdelkareem ◽  
Junyi Zou ◽  
Jia Mi
Keyword(s):  
Energy Harvesting ◽  
Vibration Energy ◽  
Bench Test ◽  
Test Results ◽  
Human Beings ◽  
Vibration Energy Harvesting ◽  
Wide Range ◽  
Harvesting Efficiency ◽  
Simulation Results ◽  
Energy Harvesting Efficiency

Abstract With the recent energy crisis, the new energy harvesting technologies have become one of the hot spots in engineering academic research and industrial applications. By its wide range of application fields, vibration energy harvesting technologies have been gradually developed and utilized in which an efficient and stable harvester technology is one of the recent key problems. In order to improve energy harvesting efficiency and reduce energy loss caused by motor inertial commutation, many mechanical structures or hydraulic structures that convert reciprocating vibration energy into single direction rotation of motor are proposed. Although these methods can improve energy harvesting efficiency, they can have negative effects in some cases, especially in the case of vibration energy harvesting from human beings. This paper proposes a vibration harvesting mechanism with mechanical rectification filter function applied to backpack. The prototype model of the system was established in SolidWorks and imported into ADAMS. Thereafter, dynamic analyses of mechanical rectification filtering characteristics and meshing characteristics of one-way clutch were simulated in ADAMS. Based on ADAMS, parametric design analysis and its influence on the mechanical rectification characteristics were investigated. The simulation results were validated by bench test results. Simulation results is done by ADAMS and the results match well with bench test results.

A Novel Vibration Energy Harvesting Method via Pulse Liquid Flow

2011 ◽  
Vol 97-98 ◽  
pp. 1076-1080
Author(s):  
Qiong Liu ◽  
Chang Rong Liao ◽  
Dan Xia Zhao ◽  
Lei Xie
Keyword(s):  
Energy Harvesting ◽  
Electric Power ◽  
Liquid Flow ◽  
Output Voltage ◽  
Active Vibration Control ◽  
Structural Vibration ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Harvesting Method ◽  
Active Vibration

Presently the electric power harvested from vibration energy by existing researches is mostly at the level of μW or mW, which is not available for structural vibration energy harvesting due to the characteristics of lower frequency, bigger mass, and higher Vibration Energy. Therefore, a novel vibration energy harvesting method via pulse liquid flow for structural vibration is put forward. The principle of the method is mainly depicted as follows: the pulse liquid flow motivated by external vibration twirls the hydraulic motor’s output shaft; then electric power is produced by the generator rotor due to the shaft torque. In this paper, the Energy Harvesting Model has been built with the help of the fluid mechanics principle and the electromagnetic induction principle. In addition, the formula for output voltage was derived and, meanwhile, the influence of the piston’s moving speed amplitude on output voltage has been analyzed as well. Ultimately, we have designed an experimental setup in order to verify the rationality of the analytical method. In our experiments, sinusoidal mechanical excitation was used to test the Energy Harvesting characteristics by the J95-I absorber testing platform. According to the results, the waveform of output line voltage is in a good agreement with the theoretical analysis, which shows effectiveness of this novel method and the worth of which to help solve the problem of dependable power supply for current semi-active vibration control systems.

A Wide Frequency Range Tunable Vibration Energy Harvesting Device Using Magnetically Induced Stiffness

2007 ◽  
Author(s):  
Vinod R. Challa ◽  
M. G. Prasad ◽  
Yong Shi ◽  
Frank Fisher
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Vibration Energy ◽  
Frequency Range ◽  
Vibration Energy Harvesting ◽  
Magnetic Forces ◽  
Resonance Frequencies ◽  
Wide Range ◽  
Continuous Power ◽  
Energy Harvesting Devices

Although wireless sensors show extensive promise across a wide range of applications, one requirement necessary for widespread deployment is a suitable long-life power source. Self sustainable powering techniques allow for efficient use of these sensors, whose potential life is usually longer than that of the power sources. Vibration energy harvesting techniques offer to have the potential to be employed in powering these devices. The most important requirement of vibration energy harvesting devices is that they be in resonance to harvest energy efficiently. Most of the vibration energy harvesting devices built, irrespective of the mechanism involved, are based on a single resonance frequency, with the efficiency of these devices is very much limited to that specific frequency. In this paper, a frequency tunable mechanism is presented which allows the energy harvesting device to generate power over a wide range of frequencies. External magnetic forces have been used to induce additional stiffness which is variable depending on the distance between the magnets. This technique allowed us to tune the resonance frequencies to have +/− 20% of the original (untuned) resonant frequency. Further, the device can be tuned to higher and lower frequency with respect to the untuned resonance frequency by using attractive and repulsive magnetic forces, respectively. As a proof-of-concept, a piezoelectric cantilever-based energy harvesting device with a natural frequency of 26 Hz was fabricated whose resonance frequency was successfully tuned over a frequency range of 22 Hz to 32 Hz, enabling a continuous power output of 240 μW to 280 μW over the entire frequency range. The tuning mechanism can be employed to any vibrating structure.

Design and modeling of a flexible longitudinal zigzag structure for enhanced vibration energy harvesting

2016 ◽  
Vol 28 (3) ◽  
pp. 367-380 ◽  
Author(s):  
Shengxi Zhou ◽  
Weijia Chen ◽  
Mohammad H Malakooti ◽  
Junyi Cao ◽  
Daniel J Inman
Keyword(s):  
Theoretical Model ◽  
Energy Harvesting ◽  
Free Vibration Analysis ◽  
Free Vibrations ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Element Analysis ◽  
Low Frequencies ◽  
Wide Range ◽  
Zigzag Structure

The use of piezoelectric materials for vibration energy harvesting at low frequencies is challenging and requires innovative structural design. Here, a flexible longitudinal zigzag structure is developed to enhance energy harvesting at low-frequency ambient vibrations. The proposed structure is composed of orthogonal beams which enable vibration energy harvesting in two directions. A theoretical model based on Euler–Bernoulli beam theory is formulated to study the dynamic response of the structure under free vibrations. The free vibration analysis demonstrates that low operating frequencies can be obtained by increasing the number of, and/or the length of, beams in the proposed structure. To validate the accuracy of the developed theoretical model, finite element analysis is performed using ANSYS. On verification of the model’s accuracy, the piezoelectric effect of the active beams is considered in the model to evaluate the energy harvesting performance of the proposed flexible longitudinal zigzag structure. Numerical results demonstrate that the output voltage and the working frequency of these energy harvesting structures can be tailored through simply altering the number of beams. Overall, the results indicate that the proposed structure is capable of efficient energy conversion at low frequencies, which makes them suitable for a wide range of working conditions.

scholarly journals On the Possibility of Developing Magnetostrictive Fe-Co/Ni Clad Plate with Both Vibration Energy Harvesting and Mass Sensing Elements

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4486
Author(s):  
Kotaro Mori ◽  
Yinli Wang ◽  
Kenichi Katabira ◽  
Daiki Neyama ◽  
Ryuichi Onodera ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Virus Detection ◽  
Vibration Energy ◽  
Mass Detection ◽  
Vibration Energy Harvesting ◽  
Bending Vibration ◽  
Energy Harvesters ◽  
Clad Steel ◽  
Spread Of Infection

The severe acute respiratory syndrome coronavirus (SARS-CoV-2) has spread rapidly around the world. In order to prevent the spread of infection, city blockades and immigration restrictions have been introduced in each country, but these measures have a severe serious impact on the economy. This paper examines the possibility of both harvesting vibration energy and detecting mass by using a magnetostrictive alloy. Few efforts have been made to develop new magnetostrictive biosensor materials. Therefore, we propose magnetostrictive Fe-Co/Ni clad steel vibration energy harvesters with mass detection, and we numerically and experimentally discuss the effect of the proof mass weight on the frequency shift and output voltage induced by bending vibration. The results reveal that the frequency and output voltage decrease significantly as the mass increases, indicating that the energy harvesting device is capable of mass detection. In the future, device miniaturization and the possibility of virus detection will be considered.

A Vibration Energy Harvesting Structure, Tunable Over a Wide Frequency Range Using Minimal Actuation

2013 ◽  
Author(s):  
John Heit ◽  
David Christensen ◽  
Shad Roundy
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Frequency Tuning ◽  
Wide Frequency Range ◽  
Design Parameters ◽  
Vibration Energy ◽  
Test Results ◽  
Vibration Energy Harvesting ◽  
Frequency Tunability ◽  
Added Benefit

This paper introduces a novel vibration energy harvesting structure with a resonance frequency that is tunable over a large range using a simple compact mechanical adjustment that alters the structural stiffness. The frequency tuning requires minimal actuation that can be “turned off” while maintaining the new resonance frequency. Testing shows that the natural frequency can be adjusted from 32 Hz to 85 Hz. The structure is coupled with an electromagnetic transducer to generate power. Test results at varying excitation frequencies and amplitudes demonstrate tunable power generation over a very wide bandwidth. In addition to frequency tunability, the structure is a nonlinear softening spring, which provides the added benefit of a passively wider bandwidth for specific ranges of the design parameters.

scholarly journals Experiment Investigation of Bistable Vibration Energy Harvesting with Random Wave Environment

2021 ◽  
Vol 11 (9) ◽  
pp. 3868
Author(s):  
Qiong Wu ◽  
Hairui Zhang ◽  
Jie Lian ◽  
Wei Zhao ◽  
Shijie Zhou ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Harvesting ◽  
Cantilever Beam ◽  
Large Scale ◽  
Low Frequency ◽  
Vibration Energy ◽  
Random Wave ◽  
Periodic Signal ◽  
Vibration Energy Harvesting ◽  
Motion Activity

The energy harvested from the renewable energy has been attracting a great potential as a source of electricity for many years; however, several challenges still exist limiting output performance, such as the package and low frequency of the wave. Here, this paper proposed a bistable vibration system for harvesting low-frequency renewable energy, the bistable vibration model consisting of an inverted cantilever beam with a mass block at the tip in a random wave environment and also develop a vibration energy harvesting system with a piezoelectric element attached to the surface of a cantilever beam. The experiment was carried out by simulating the random wave environment using the experimental equipment. The experiment result showed a mass block’s response vibration was indeed changed from a single stable vibration to a bistable oscillation when a random wave signal and a periodic signal were co-excited. It was shown that stochastic resonance phenomena can be activated reliably using the proposed bistable motion system, and, correspondingly, large-scale bistable responses can be generated to realize effective amplitude enlargement after input signals are received. Furthermore, as an important design factor, the influence of periodic excitation signals on the large-scale bistable motion activity was carefully discussed, and a solid foundation was laid for further practical energy harvesting applications.

Sign in / Sign up

Export Citation Format

Share Document