scholarly journals Comprehensive Thermodynamic Analysis of the Humphrey Cycle for Gas Turbines with Pressure Gain Combustion

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3521 ◽  
Author(s):  
Panagiotis Stathopoulos
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Combustion Process ◽  
Ideal Gas ◽  
Point Of View ◽  
Pressure Gain Combustion ◽  
Combustion Technology ◽  
Secondary Air ◽  
And Performance ◽  
The Impact

Conventional gas turbines are approaching their efficiency limits and performance gains are becoming increasingly difficult to achieve. Pressure Gain Combustion (PGC) has emerged as a very promising technology in this respect, due to the higher thermal efficiency of the respective ideal gas turbine thermodynamic cycles. Up to date, only very simplified models of open cycle gas turbines with pressure gain combustion have been considered. However, the integration of a fundamentally different combustion technology will be inherently connected with additional losses. Entropy generation in the combustion process, combustor inlet pressure loss (a central issue for pressure gain combustors), and the impact of PGC on the secondary air system (especially blade cooling) are all very important parameters that have been neglected. The current work uses the Humphrey cycle in an attempt to address all these issues in order to provide gas turbine component designers with benchmark efficiency values for individual components of gas turbines with PGC. The analysis concludes with some recommendations for the best strategy to integrate turbine expanders with PGC combustors. This is done from a purely thermodynamic point of view, again with the goal to deliver design benchmark values for a more realistic interpretation of the cycle.

scholarly journals Benefits and Challenges of Pressure-Gain Combustion Systems for Gas Turbines

2009 ◽  
Vol 131 (03) ◽  
pp. 54-55 ◽  
Author(s):  
Chris Brophy ◽  
Gabriel Roy
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Technology Development ◽  
Combustion Process ◽  
Annular Array ◽  
Steady State Operation ◽  
Pressure Gain Combustion ◽  
Combustion Systems ◽  
And Performance ◽  
Collaborative Efforts

This article discusses benefits and challenges of Pressure-Gain Combustion Systems for Gas Turbines. The article also highlights that one approach to substantially improve gas turbine thermal efficiency is to replace the nearly constant pressure combustion process with some form of pressure-gain heat release such as either a constant volume or detonative mode of combustion. These systems commonly possess some form of rotating inlet valve design to control the filling process for an annular array of combustors and maintain the appropriate amount of inlet isolation. Although evaluation of turbine life and performance needs to continue, turbine efficiencies approaching values comparable to those of steady-state operation have been reported. The article concludes that the collaborative efforts, such as listed in the article, are ultimately required in times of reduced funding for continued technology development. Even with the risks and challenges associated with this technology, a high payoff potential exists with hybrid gas turbine architectures.

Uncertainty Analysis of Inflow Conditions on an HPT Gas Turbine Nozzle: Effect on Particle Deposition

2020 ◽  
Author(s):  
R. Friso ◽  
N. Casari ◽  
M. Pinelli ◽  
A. Suman ◽  
F. Montomoli
Keyword(s):  
Gas Turbine ◽  
Energy Efficient ◽  
Gas Turbines ◽  
Particle Deposition ◽  
Operating Conditions ◽  
Wide Range ◽  
And Performance ◽  
Gas Turbine Nozzle ◽  
The Impact ◽  
Inflow Conditions

Abstract Gas turbines (GT) are often forced to operate in harsh environmental conditions. Therefore, the presence of particles in their flow-path is expected. With this regard, deposition is a problem that severely affects gas turbine operation. Components’ lifetime and performance can dramatically vary as a consequence of this phenomenon. Unfortunately, the operating conditions of the machine can vary in a wide range, and they cannot be treated as deterministic. Their stochastic variations greatly affect the forecasting of life and performance of the components. In this work, the main parameters considered affected by the uncertainty are the circumferential hot core location and the turbulence level at the inlet of the domain. A stochastic analysis is used to predict the degradation of a high-pressure-turbine (HPT) nozzle due to particulate ingestion. The GT’s component analyzed as a reference is the HPT nozzle of the Energy-Efficient Engine (E3). The uncertainty quantification technique used is the probabilistic collocation method (PCM). This work shows the impact of the operating conditions uncertainties on the performance and lifetime reduction due to deposition. Sobol indices are used to identify the most important parameter and its contribution to life. The present analysis enables to build confidence intervals on the deposit profile and on the residual creep-life of the vane.

New Catalytic Combustion Technology for Very Low Emissions Gas Turbines

1994 ◽  
Author(s):  
R. A. Dalla Betta ◽  
J. C. Schlatter ◽  
S. G. Nickolas ◽  
D. K. Yee ◽  
T. Shoji
Keyword(s):  
Thermal Shock ◽  
Gas Turbine ◽  
High Temperatures ◽  
Gas Turbines ◽  
Catalytic Combustion ◽  
Combustion Process ◽  
Combustion System ◽  
Gas Turbine Combustors ◽  
Homogeneous Combustion ◽  
Combustion Technology

A catalytic combustion system has been developed which feeds full fuel and air to the catalyst but avoids exposure of the catalyst to the high temperatures responsible for deactivation and thermal shock fracture of the supporting substrate. The combustion process is initiated by the catalyst and is completed by homogeneous combustion in the post catalyst region where the highest temperatures are obtained. This has been demonstrated in subscale test rigs at pressures up to 14 atmospheres and temperatures above 1300°C (2370°F). At pressures and gas linear velocities typical of gas turbine combustors, the measured emissions from the catalytic combustion system are NOx < 1 ppm, CO < 2 ppm and UHC < 2 ppm, demonstrating the capability to achieve ultra low NOx and at the same time low CO and UHC.

Heavy Duty Gas Turbine Simulation: Global Performances Estimation and Secondary Air System Modifications

2006 ◽  
Author(s):  
Carlo Carcasci ◽  
Bruno Facchini ◽  
Stefano Gori ◽  
Luca Bozzi ◽  
Stefano Traverso
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Energy System ◽  
Operating Conditions ◽  
Coupled Analysis ◽  
Ambient Conditions ◽  
Air System ◽  
Secondary Air ◽  
And Performance

This paper reviews a modular-structured program ESMS (Energy System Modular Simulation) for the simulation of air-cooled gas turbines cycles, including the calculation of the secondary air system. The program has been tested for the Ansaldo Energia gas turbine V94.3A, which is one of the more advanced models in the family Vx4.3A with a rated power of 270 MW. V94.3A cooling system has been modeled with SASAC (Secondary Air System Ansaldo Code), the Ansaldo code used to predict the structure of the flow through the internal air system. The objective of the work was to investigate the tuning of the analytical program on the basis of the data from design and performance codes in use at Ansaldo Energy Gas Turbine Department. The results, both at base load over different ambient conditions and in critical off-design operating points (full-speed-no-load and minimum-load), have been compared with APC (Ansaldo Performance Code) and confirmed by field data. The coupled analysis of cycle and cooling network shows interesting evaluations for components life estimation and reliability during off-design operating conditions.

Axial Compressor Degradation Effects on Heavy Duty Gas Turbines Overall Performances

2013 ◽  
Author(s):  
Pio Astrua ◽  
Stefano Cecchi ◽  
Stefano Piola ◽  
Andrea Silingardi ◽  
Federico Bonzani
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Axial Compressor ◽  
Performance Parameters ◽  
Heavy Duty ◽  
Compressor Blades ◽  
Modular Model ◽  
Secondary Air ◽  
The Impact ◽  
Insight Into

The operation of a gas turbine is the result of the aero-thermodynamic matching of several components which necessarily experience aging and degradation over time. An approach to treat degradation phenomena of the axial compressor is provided, with an insight into the impact they have on compressor operation and on overall GT performances. The analysis is focused on the surface fouling of compressor blades and on rotor tip clearances variation. A modular model is used to simulate the gas turbine operation in design and off-design conditions and the aerodynamic impact of fouling and rotor tip clearances increase is assessed by means of dedicated loss and deviation correlations implemented in the 1D mid-streamline code of the compressor modules. The two different degradation sources are individually considered and besides the overall GT performance parameters, the analysis includes an evaluation of the compressor degradation impact on the secondary air system.

Development and Application of Industrial Gas Turbines for Medium-Btu Gaseous Fuels

1986 ◽  
Vol 108 (1) ◽  
pp. 182-190 ◽  
Author(s):  
J. G. Meier ◽  
W. S. Y. Hung ◽  
V. M. Sood
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Combustion Process ◽  
Point Of View ◽  
Combustion System ◽  
Successful Development ◽  
Gaseous Fuels ◽  
Sanitary Landfills ◽  
Industrial Gas Turbines ◽  
Alternate Fuels

This paper describes the successful development and application of industrial gas turbines using medium-Btu gaseous fuels, including those derived from biodegradation of organic matters found in sanitary landfills and liquid sewage. The effects on the gas turbine and its combustion system of burning these alternate fuels compared to burning high-Btu fuels, along with the gas turbine development required to use alternate fuels from the point of view of combustion process, control system, gas turbine durability, maintainability and safety, are discussed.

Consequential Damage of Blade Failures in Single Shaft Gas Turbines

2013 ◽  
Author(s):  
Hans E. Wettstein
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Rotation Speed ◽  
High Sensitivity ◽  
Point Of View ◽  
Bending Mode ◽  
History Of ◽  
Blade Failure ◽  
Turbine Design ◽  
The Impact

In history of single shaft gas turbines many blade failures have happened. In most cases the consequential damage has been limited to the blading in the downstream gas path. This is unavoidable because of the impact of debris. But in some cases the related unbalance of the rotor has caused additionally extended damage during the run-down of the engine. In the worst publicly known case the result was a complete destruction of the engine with disintegration of the rotor. The general rotordynamic literature indicates features and criteria to prevent such a high sensitivity to unbalance. Some manufacturers use internal design criteria for this purpose. A sometimes mentioned criterion in this respect is: “To keep the rotation speed below the frequency of the first bending mode of the rotor”. The aim of this paper is to track generally the history of gas turbine blade failures and to explain the design features of rotors and bearing support structures, which lead to high or low risk of secondary damages after blade failures. This is not new but a description from a gas turbine design point of view is missing so far. Both theory and experience indicate that an exact prediction of the response amplitudes to a large unbalance from a blade failure is very difficult. On the other hand the most important criteria for a robust behavior in this respect are simple to describe. And they could easily be specified and verified by manufacturers, customers or insurers.

A Study on Low NOx Combustion in LBG-Fueled 1500°C-Class Gas Turbine

1994 ◽  
Author(s):  
Toshihiko Nakata ◽  
Mikio Sato ◽  
Toru Ninomiya ◽  
Takeharu Hasegawa
Keyword(s):  
Power Generation ◽  
Combustion Chamber ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Coal Gasification ◽  
Combustion Process ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Gas Temperature ◽  
Secondary Air

Developing integrated coal gasification combined cycle systems ensures cost-effective and environmentally sound options for supplying future power generation needs. The reduction of NOx emissions and increasing the inlet temperature of gas turbines are the most significant issues in gas turbine development in an Integrated Coal Gasification Combined Cycle (IGCC) power generation systems. The coal gasified fuel, which is produced in a coal gasifier of air-blown entrained-flow type has calorific value as low as 1/10 of natural gas. Furthermore the fuel gas contains ammonia when a gas cleaning system is a hot type, and ammonia will be converted to nitrogen oxides in the combustion process of a gas turbine. This study is performed in a 1500°C-class gas turbine combustor firing low-Btu coal-gasified fuel in IGCC systems. An advanced rich-lean combustor of 150-MW class gas turbine was designed to hold stable combustion burning low-Btu gas and to reduce fuel NOx emission that is produced from the ammonia in the fuel. The main fuel and the combustion air is supplied into fuel-rich combustion chamber with strong swirl flow and make fuel-rich flame to decompose ammonia into intermediate reactants such as NHi and HCN. The secondary air is mixed with primary combustion gas dilatorily to suppress the oxidization of ammonia reactants in fuel-lean combustion chamber and to promote a reducing process to nitrogen. By testing it under atmospheric pressure conditions, the authors have obtained a very significant result through investigating the effect of combustor exit gas temperature on combustion characteristics. Since we have ascertained the excellent performance of the tested combustor through our extensive investigation, we wish to report on the results.

First Assessment of Biogas Co-Firing on the GE MS9001FA Gas Turbine Using CFD

2003 ◽  
Author(s):  
J. A. Lycklama a` Nijeholt ◽  
E. M. J. Komen ◽  
A. J. L. Verhage ◽  
M. C. van Beek
Keyword(s):  
Natural Gas ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combustion Process ◽  
Geometrical Model ◽  
Electricity Production ◽  
Power Station ◽  
Complete Combustion ◽  
Air Mixing ◽  
The Impact

Replacement of fossil fuel by biomass-derived fuel is currently under study in the Netherlands within the context of CO2 -neutral electricity production. In view of this, co-firing biogas in the natural-gas fired Eems gas turbine power plant is being considered. This would entail extension of the power station with a biomass gasification plant for the production of biogas. The main unit of the Electrabel Eemshaven Power Station consists of five GE MS9001FA-gas turbines. A target is to replace up to 13% of natural gas consumption by biogas. The objective of the current project was to determine the impact of co-firing on the flame behavior. Therefore various options for biogas co-firing using combinations of pilot and premix burners have been studied. Computational Fluid Dynamics (CFD) simulations of the combustion process using a geometrical model of the complete combustion chamber have been performed. The flow conditions at the premix burner outlets were determined with a separate, detailed CFD model of the burner, simulating the fuel-air mixing with the required high accuracy. Advanced combustion modeling with help of the detailed GRI 3.0-reaction mechanism was used, as well as simpler models for fast chemical kinetics. A method was devised for calibrating the applied combustion models. Various firing strategies involving the premix and pilot burners were analyzed. Safe ranges for biogas co-firing have been determined in this first feasibility study.

scholarly journals Impact of the Application of Fuel and Water Emulsion on CO and NOx Emission and Fuel Consumption in a Miniature Gas Turbine

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2224
Author(s):  
Paweł Niszczota ◽  
Marian Gieras
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
Gas Turbines ◽  
Combustion Process ◽  
Electric Energy ◽  
Experimental Tests ◽  
Nox Emissions ◽  
Water Emulsion ◽  
The Impact

Miniature gas turbines (MGT) are an important part of the production of electric energy in distributed systems. Due to the growing requirements for lower emissions and the increasing prices of hydrocarbon fuels, it is becoming more and more important to enhance the efficiency and improve the quality of the combustion process in gas turbines. One way to reduce NOx emissions is to add water to the fuel in the form of a water-based emulsion (FWE). This article presents the research results and the analysis of the impact of the use of FWE on CO and NOx emissions as well as on fuel consumption in MGT GTM-120. Experimental tests and numerical calculations were carried out using standard fuel (DF) and FWE with water content from 3% to 12%. It was found that the use of FWE leads to a reduction in NOx and CO emissions and reduction in the consumption of basic fuel. The maximum reduction in emissions by 12.32% and 35.16% for CO and NOx, respectively, and a reduction in fuel consumption by 5.46% at the computational operating point of the gas turbine were recorded.

Sign in / Sign up

Export Citation Format

Share Document