scholarly journals A Novel Multi-Element Resonant Converter with Self-Driven Synchronous Rectification

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 715 ◽  
Author(s):  
Jing-Yuan Lin ◽  
Yi-Feng Lin ◽  
Sih-Yi Lee
Keyword(s):  
Input Voltage ◽  
Inrush Current ◽  
Resonant Converter ◽  
Detection Scheme ◽  
Zero Voltage Switching ◽  
Analysis And Design ◽  
Switching Losses ◽  
Light Load ◽  
Zero Current Switching ◽  
Synchronous Rectification

This paper proposes a novel multi-element resonant converter with self-driven synchronous rectification (SR). The proposed resonant converter can achieve a zero-voltage-switching (ZVS) operation from light load to full load, meanwhile, the zero-current-switching (ZCS) can achieve rectifiers of a secondary-side. Therefore, the switching losses can be significantly reduced. Compared with an LLC resonant converter, the proposed resonant converter can be effective to decrease the circulating energy through the primary-side of the transformer to output a load and provide a wide voltage gain range for over-current protection as well as decreasing the inrush current under the start-up condition. Moreover, the proposed converter uses a simple current detection scheme to control the synchronous rectification switches. A detailed analysis and design of this novel multi-element resonant converter with self-driven synchronous rectification is described. Finally, a DC input voltage of 380-VDC and an output voltage/current of 12-VDC/54-A for the resonant converter prototype is built to verify the theoretical analysis and performance of the proposed converter.

Design and Implementation of LLC Resonant Converter for Photovoltaic Battery Charging Application

2015 ◽  
Vol 785 ◽  
pp. 101-105
Author(s):  
Adrian Soon Theam Tan ◽  
Shahid Iqbal
Keyword(s):  
High Efficiency ◽  
Input Voltage ◽  
Voltage Regulation ◽  
Photovoltaic System ◽  
Resonant Converter ◽  
Battery Charging ◽  
Zero Voltage Switching ◽  
Design And Implementation ◽  
Switching Losses ◽  
Llc Resonant Converter

Photovoltaic power conditioning system (PVPCS) requires a high efficiency dc-dc converterstage capable of wide input voltage regulation and have the ease of maximum power point implementation for both stand alone photovoltaic system and grid-connected system. Galvanic isolation at the dc-dc stage can replace the isolation needed in the inverter stage and thus reduce the sizeof isolation transformer and increases overall system efficiency. This paper presents detailed analysis,design and implementation of a LLC resonant converter for photovoltaic battery charging application.The LLC resonant converter operate with zero voltage switching (ZVS) turn on and low current turnoff thus reducing switching losses. The experimental results are given to validate the operation andperformance of the converter.

scholarly journals Analysis of a Wide Voltage Hybrid Soft Switching Converter

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 473 ◽  
Author(s):  
Bor-Ren Lin ◽  
Yen-Chun Liu
Keyword(s):  
Power Conversion ◽  
Input Voltage ◽  
Soft Switching ◽  
Resonant Converter ◽  
Solar Pv ◽  
Load Range ◽  
Pwm Converter ◽  
Load Voltage ◽  
Zero Voltage Switching ◽  
Circulating Current

A hybrid PWM converter is proposed and investigated to realize the benefits of wide zero-voltage switching (ZVS) operation, wide voltage input operation, and low circulating current for direct current (DC) wind power conversion and solar PV power conversion applications. Compared to the drawbacks of high freewheeling current and hard switching operation of active devices at the lagging-leg of conventional full bridge PWM converter, a three-leg PWM converter is studied to have wide input-voltage operation (120–600 V). For low input-voltage condition (120–270 V), two-leg full bridge converter with lower transformer turns ratio is activated to control load voltage. For high input-voltage case (270–600 V), PWM converter with higher transformer turns ratio is operated to regulate load voltage. The LLC resonant converter is connecting to the lagging-leg switches in order to achieve wide load range of soft switching turn-on operation. The high conduction losses at the freewheeling state on conventional full bridge converter are overcome by connecting the output voltage of resonant converter to the output rectified terminal of full bridge converter. Hence, a 5:1 (600–120 V) hybrid converter is realized to have less circulating current loss, wide input-voltage operation and wide soft switching characteristics. An 800 W prototype is set up and tested to validate the converter effectiveness.

scholarly journals Design and Implementation of 2.5kW IBFB-LLC DC/ DC Converter Using SiC Mosfet

2021 ◽  
Vol 31.2 (149) ◽  
pp. 7-14
Keyword(s):  
High Frequency ◽  
Power Flow ◽  
Input Voltage ◽  
Voltage Range ◽  
Zero Voltage Switching ◽  
Design And Implementation ◽  
Switching Losses ◽  
Power Switches ◽  
Isolation Transformer ◽  
Zero Voltage

Interleaved Boost Full Bridge integrated LLC resonant (IBFB- LLC) is an isolated DC/DC converter with directional power flow, which can cope with a wide input voltage range of PV applications. The main losses of the converter are switching losses of the power switches and transformers losses. This paper proposes a method to improve the efficiency of the IBFB converter due to zero voltage switching technique, in combination with employing new SiC MOSFET technology instead of the conventional Si MOSFET. In addition, Litz wire is also adopted to reduce the losses on the high frequency isolation transformer. Both numerical simulations and experiments with a prototype 2.5kW converter are implemented to verify the feasibility and effectiveness of the proposed solution.

scholarly journals Resonant Hybrid Flyback, a New Topology for High Density Power Adaptors

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 363 ◽  
Author(s):  
Alfredo Medina-Garcia ◽  
Manfred Schlenk ◽  
Diego Morales ◽  
Noel Rodriguez
Keyword(s):  
Power Density ◽  
Pulse Width Modulation ◽  
High Efficiency ◽  
Full Range ◽  
Input Voltage ◽  
Zero Voltage Switching ◽  
Zero Current Switching ◽  
Zero Current ◽  
Class Power ◽  
World Class

In this article, an innovative power adaptor based on the asymmetrical pulse width modulation (PWM) flyback topology will be presented. Its benefits compared to other state-of-the-art topologies, such as the active clamp flyback, are analyzed in detail. It will also describe the control methods to achieve high efficiency and power density using zero-voltage switching (ZVS) and zero-current switching (ZCS) techniques over the full range of the input voltage and the output load, providing comprehensive guidelines for the practical design. Finally, we demonstrate the convenience of the proposed design methods with a 65 W adaptor prototype achieving a peak efficiency of close to 95% and a minimum efficiency of 93.4% at full load over the range of the input voltage, as well as a world-class power density of 22 W/inch3 cased.

scholarly journals Optimal Design of Multi-Output LLC Resonant Converter with Independently Regulated Synchronous Single-Switched Power-Regulator

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4341
Author(s):  
Sang Gab Park ◽  
Byoung Kuk Lee ◽  
Jong Soo Kim
Keyword(s):  
Electromagnetic Interference ◽  
Resonant Converter ◽  
Switching Losses ◽  
Zero Current Switching ◽  
Zero Current ◽  
Series Resonant ◽  
Power Switches ◽  
Voltage Doubler ◽  
Llc Resonant Converter ◽  
Secondary Side

This paper presents a tightly regulated multi-output isolated converter that employs only an independently regulated synchronous Single-Switched Post-Regulator (SSPR). The proposed converter is a highly accurate single-ended secondary side post-regulator based on a Series Resonant Converter (SRC); furthermore, it has a voltage-doubler characteristic. The proposed post-regulator requires only one auxiliary switch, in contrast with a bulky and expensive non-isolated DC–DC converter. Moreover, the added voltage-doubler can tightly regulate the slave output current. In addition, the voltage-doubler can improve electromagnetic interference characteristics and reduce switching losses arising from the Zero Current Switching (ZCS) operation of all power switches. The validity of the proposed converter is verified using experimental results obtained via a prototype converter applicable to an LED 3D TV power supply.

scholarly journals SINGLE PHASE REDUCED ORDER AC-AC RESONANT- FREQUENCY CONVERTER

2021 ◽  
Vol 9 (06) ◽  
pp. 663-672
Author(s):  
Anukriti Sharma ◽  
◽  
Navdeep Singh ◽  
Keyword(s):  
Resonant Frequency ◽  
Single Phase ◽  
Pulse Width Modulation ◽  
Frequency Converter ◽  
Simulation Software ◽  
Reduced Order ◽  
Zero Voltage Switching ◽  
Switching Losses ◽  
Zero Current Switching ◽  
Zero Current

This paper presents the performance analysis of proposed circuit of Single-Phase Reduced Order AC-AC Resonant Frequency Converter. AC-AC converter is minimized number of switches for multi-operation and resonant converter is converter work on the principle of ZCS (Zero Current Switching) and ZVS (Zero Voltage Switching) combining both topology, which provide better output with reduce THD and switching losses. A mathematical modeling is done for proper value of used parameters in converter. The output of converter is improved by applying Modulation technique in this converter we are using Trapezoidal Pulse Width Modulation (TPWM) for the better performance and control. THD of the converter is calculated by using MATLAB simulation software. MATALB simulation of AC –AC Resonate Frequency Converter is done by using MOSFET as switch.

Sign in / Sign up

Export Citation Format

Share Document