scholarly journals Complete Data Inventory of a Geothermal Power Plant for Robust Cradle-to-Grave Life Cycle Assessment Results

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2839 ◽  
Author(s):  
Lorenzo Tosti ◽  
Nicola Ferrara ◽  
Riccardo Basosi ◽  
Maria Laura Parisi
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plants ◽  
Electric Energy ◽  
Impact Category ◽  
Gas Content ◽  
Primary Data ◽  
Geothermal Systems ◽  
High Concentration ◽  
Geothermal Power

Technologies to produce electric energy from renewable geothermal source are gaining increasing attention, due to their ability to provide a stable output suitable for baseload production. Performing life cycle assessment (LCA) of geothermal systems has become essential to evaluate their environmental performance. However, so far, no documented nor reliable information has been made available for developing robust LCA studies. This work provides a comprehensive inventory of the Italian Bagnore geothermal power plants system. The inventory is based exclusively on primary data, accounting for every life cycle stage of the system. Data quality was assessed by means of a pedigree matrix. The calculated LCA results showed, with an overall low level of uncertainty (2–3%), that the commissioning and operational phases accounted for more than 95% of the environmental profile. Direct emissions to atmosphere were shown to be the major environmental impact, particularly those released during the operational phase (84%). The environmental performances comparison with the average Italian electricity mix showed that the balance is always in favor of geothermal energy production, except in the climate change impact category. The overall outcome confirms the importance, for flash technology employing fluid with a high concentration of gas content, of using good quality primary data to obtain robust results.

scholarly journals Adoption of Photovoltaic Systems Along a Sure Path: A Life-Cycle Assessment (LCA) Study Applied to the Analysis of GHG Emission Impacts

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2806 ◽  
Author(s):  
Gabriel Constantino ◽  
Marcos Freitas ◽  
Neilton Fidelis ◽  
Marcio Pereira
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plants ◽  
Greenhouse Gas Emission ◽  
Great Influence ◽  
Electric Energy ◽  
Renewable Sources ◽  
Pv Systems ◽  
Payback Time ◽  
High Share

The expansion of photovoltaic solar energy in the world is significant. However, its contribution to decreases in greenhouse gases (GHG) is not an absolute guarantee. In this context, it is necessary to evaluate its benefits in advance, considering the structure of the electric energy supply matrix of the country producing the photovoltaic solar system, as well as the country where the technology will be implemented. This study evaluates the adoption of renewable sources for electric power generation in a country with a high share of renewable energy. A life-cycle assessment (LCA) of a set of multi-Si photovoltaic (PV) systems installed in the Brazilian northeast (NE), was carried out. The actual generation data of 10 plants totaling 1.1 MWp installed capacity were evaluated during two years of operation. Energy payback time (EPBT), greenhouse gas emission rate (GHGe-rate), and emission payback time were calculated. The great influence of the electric matrix characteristics of the country manufacturing PV systems was evidenced in the results. The interconnected Brazilian electrical system had a 2020 projected GHGe-rate of 63.9 g CO2/kWh, while the results of 70% of the photovoltaic solar power plants (PSPS) assessed herein exhibit higher GHGe-rates. Thus, in countries where the electric matrix comprises a high share of renewable sources, such as Brazil, the incentive to use PV systems manufactured in nations whose electric matrix registers high emission factors should be well evaluated in terms of the impacts of GHG concentrations and the promotion of sustainable development, in order to avoid indirect import of significant amounts of carbon embedded in the systems.

scholarly journals Life Cycle Assessment of Three Safe Drinking-Water Options in India: Boiled Water, Bottled Water, and Water Purified with a Domestic Reverse-Osmosis Device

2019 ◽  
Vol 11 (22) ◽  
pp. 6233 ◽  
Author(s):  
Tirma Garcia-Suarez ◽  
Michal Kulak ◽  
Henry King ◽  
Julia Chatterton ◽  
Arunima Gupta ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Reverse Osmosis ◽  
Impact Category ◽  
Bottled Water ◽  
Green Water ◽  
Primary Data ◽  
Liquefied Petroleum Gas ◽  
Attributional Life Cycle Assessment ◽  
Fossil Resource

Indian households connected to improved water sources still need to purify their water before drinking. In this study, environmental impacts of three purification options in urban India were compared: (a) boiling water, (b) bottled, purified water, and (c) purifying the water with a domestic reverse-osmosis (RO) device. Primary data for the manufacture, distribution, and the use of the RO device were obtained directly from the manufacturer. Standard, attributional Life Cycle Assessment was performed using a suite of impact assessment methods from ReCiPe v 1.8. In addition, blue and green water consumptions were quantified using the Quantis water database. Bottled water was found to be associated with the highest impacts for all impact categories considered, mainly due to the production and the transportation of bottles. The preference between the other two systems depends on the considered impact category. Water boiled using the liquefied petroleum gas (current practice of urban consumers in India) was found to have higher impacts on climate change and fossil resource use than water from a domestic RO device. The use of the device; however, was found to have higher impacts on water resources than boiling, both in terms of quality (freshwater eutrophication) and availability (water consumption).

Life cycle assessment of atmospheric emission profiles of the Italian geothermal power plants

2019 ◽  
Vol 234 ◽  
pp. 881-894 ◽  
Author(s):  
Maria Laura Parisi ◽  
Nicola Ferrara ◽  
Loredana Torsello ◽  
Riccardo Basosi
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plants ◽  
Atmospheric Emission ◽  
Geothermal Power

scholarly journals Applying Harmonised Geothermal Life Cycle Assessment Guidelines to the Rittershoffen Geothermal Heat Plant

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3820
Author(s):  
Mélanie Douziech ◽  
Lorenzo Tosti ◽  
Nicola Ferrara ◽  
Maria Laura Parisi ◽  
Paula Pérez-López ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Heat Production ◽  
Hot Spot ◽  
Resource Depletion ◽  
Potential Contribution ◽  
Geothermal Systems ◽  
Geothermal Heat ◽  
The Future ◽  
The Impact

Heat production from a geothermal energy source is gaining increasing attention due to its potential contribution to the decarbonization of the European energy sector. Obtaining representative results of the environmental performances of geothermal systems and comparing them with other renewables is of utmost importance in order to ensure an effective energy transition as targeted by Europe. This work presents the outputs of a Life Cycle Assessment (LCA) performed on the Rittershoffen geothermal heat plant applying guidelines that were developed within the H2020 GEOENVI project. The production of 1 kWhth from the Rittershoffen heat plant was compared to the heat produced from natural gas in Europe. Geothermal heat production performed better than the average heat production in climate change and resource use, fossil categories. The LCA identified the electricity consumption during the operation and maintenance phase as a hot spot for several impact categories. A prospective scenario analysis was therefore performed to assess the evolution of the environmental performances of the Rittershoffen heat plant associated with the future French electricity mixes. The increase of renewable energy shares in the future French electricity mix caused the impact on specific categories (e.g., land use and mineral and metals resource depletion) to grow over the years. However, an overall reduction of the environmental impacts of the Rittershoffen heat plant was observed.

Environmental Life-Cycle Assessment and Life-Cycle Cost Analysis of a High-Rise Mass Timber Building: A Case Study in Pacific Northwestern United States

2021 ◽  
Vol 13 (14) ◽  
pp. 7831
Author(s):  
Shaobo Liang ◽  
Hongmei Gu ◽  
Richard Bergman
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Cost Analysis ◽  
Life Cycle Cost ◽  
Impact Category ◽  
Life Cycle Cost Analysis ◽  
Floor Area ◽  
High Rise ◽  
Concrete Building ◽  
Mass Timber

Global construction industry has a huge influence on world primary energy consumption, spending, and greenhouse gas (GHGs) emissions. To better understand these factors for mass timber construction, this work quantified the life cycle environmental and economic performances of a high-rise mass timber building in U.S. Pacific Northwest region through the use of life-cycle assessment (LCA) and life-cycle cost analysis (LCCA). Using the TRACI impact category method, the cradle-to-grave LCA results showed better environmental performances for the mass timber building relative to conventional concrete building, with 3153 kg CO2-eq per m2 floor area compared to 3203 CO2-eq per m2 floor area, respectively. Over 90% of GHGs emissions occur at the operational stage with a 60-year study period. The end-of-life recycling of mass timber could provide carbon offset of 364 kg CO2-eq per m2 floor that lowers the GHG emissions of the mass timber building to a total 12% lower GHGs emissions than concrete building. The LCCA results showed that mass timber building had total life cycle cost of $3976 per m2 floor area that was 9.6% higher than concrete building, driven mainly by upfront construction costs related to the mass timber material. Uncertainty analysis of mass timber product pricing provided a pathway for builders to make mass timber buildings cost competitive. The integration of LCA and LCCA on mass timber building study can contribute more information to the decision makers such as building developers and policymakers.

scholarly journals Multi-objective optimization of ORC geothermal conversion system integrated with life cycle assessment

2018 ◽  
Vol 70 ◽  
pp. 01012
Author(s):  
Dominika Matuszewska ◽  
Marta Kuta ◽  
Jan Górski
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Geothermal System ◽  
Geothermal Systems ◽  
Multi Objective Optimization ◽  
Geothermal Resources ◽  
Multi Objective ◽  
Conversion Technology

This paper details the development of a systematic methodology to integrated life cycle assessment (LCA) with thermo-economic models and to thereby identify the optimal exploitation schemes of geothermal resources. Overall geothermal systems consist of a superstructure of geothermal exploitable resources, a superstructure of conversion technology and multiple demand profiles for Swiss city. In this paper, an enhanced geothermal system has been chosen as exploitable resources. The energy conversion technology used in modelling is an organic Rankine cycle, which can be used to supply heat and electricity. In the Swiss case four demand profiles periods are considered: summer, interseason, winter and extreme winter, the city Nyon serving for the example case study. The multi-objective optimization system, that uses an evolutionary algorithm, is employed to determine the optimal scheme for some of the prepared models, with exergy efficiency and environmental impact as objectives.

Energy and environmental life cycle assessment of a high concentration photovoltaic power plant in Morocco

2016 ◽  
Vol 22 (3) ◽  
pp. 364-373 ◽  
Author(s):  
Blanca Corona ◽  
Lidia Escudero ◽  
Goulven Quéméré ◽  
Ignacio Luque-Heredia ◽  
Guillermo San Miguel
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
High Concentration ◽  
Photovoltaic Power ◽  
Environmental Life Cycle Assessment
Sign in / Sign up

Export Citation Format

Share Document