scholarly journals Evaluation of Daylight and Cooling Performance of Shading Devices in Residential Buildings in South Korea

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4749
Author(s):  
Taesub Lim ◽  
Woong Seog Yim ◽  
Daeung Danny Kim
Keyword(s):  
Energy Consumption ◽  
South Korea ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Main Concern ◽  
Design Strategies ◽  
Increasing Demand ◽  
Shading Devices ◽  
Design Options

Accounting for more than half of buildings in South Korea, the energy consumed by residential buildings has become a main concern and the cooing demand has rapidly increased. To reduce energy consumption, several passive and active design strategies have generally been applied. However, there has been an increasing demand for high window-to-wall ratios in residential buildings, it is imperative to block sunlight into a building effectively. Focusing on the reduction of cooling energy consumption in a residential building, the present study assessed the daylight and energy performance of shading devices. Among various types of shading devices, the Venetian blind, horizontal louver, light shelf, and egg-crate were selected. The illuminance levels in three different areas in a building were measured. In addition, the annual cooling energy consumption by these shading devices was investigated. As a result, both daylight and energy performance varied with different design options of these shading devices. Because of the slight performance difference among shading devices, the artificial loads of two best shading devices were compared. In sum, the egg-crate shading was the most proper shading device to block sunlight as well as reduce the cooling energy consumption effectively.

Energy Consumption Simulation for Residential Buildings With Shading Devices in Different Regions

2007 ◽  
Author(s):  
Junjie Liu ◽  
Xiaojie Zhou ◽  
Zhihong Gao
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Energy ◽  
Energy Performance ◽  
Indoor Environments ◽  
Total Energy Consumption ◽  
South West ◽  
Shading Devices ◽  
Energy Consumption Simulation

With the development of energy saving, it is needed to calculate the energy consumption of the residential building, particularly accurate dynamic energy consumption. Fixed shading devices are wildly used to save building energy because they prevent undesirable heat coming through the windows during the “overheated period”, just as in summer, which can ameliorate the indoor environments and reduce the energy consumption of air-conditioning in summer. But they will also prevent solar energy which can be used in winter to enter windows. So it is very important to be able to determine the optimal shading devices of windows. The overhangs and vertical-shading devices are representative to study the different energy performance in summer and winter, in an actual dwell house. On the other hand, fixed shading devices can weaken the effect of daylighting, so we would take both the total energy consumption and rooms’ daylighting into account. In this study, we choose several typical dwelling houses in different cities located in north, south, west, east and central region of China respectively. We calculated energy consumption of those models by using Energyplus program, and compared the shading performance of horizontal and vertical shading devices, then optimal configuration dimensions of horizontal shading devices are recommended on the basis of different requirements for solar heat gains in winter and in summer for those typical dwelling houses.

scholarly journals A Study of Design Variables in Daylight and Energy Performance in Residential Buildings under Hot Climates

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5836
Author(s):  
Ali Mohammed AL-Dossary ◽  
Daeung Danny Kim
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Total Energy Consumption ◽  
Design Variables ◽  
Slow Progress ◽  
Shading Devices

In Saudi Arabia, residential buildings are one of the major contributors to total energy consumption. Even though there are abundant natural resources, it is somewhat difficult to apply them to building designs, as design variables, due to slow progress and private issues in Saudi Arabia. Thus, the present study demonstrated the development of sustainable residential building design by examining the daylighting and energy performance with design variables. Focusing on the daylighting system, the design variables were chosen, including window-to-wall ratios (WWR), external shading devices, and types of glazing. The illuminance level by these design variables in a building was evaluated by using daylight metrics, such as spatial daylight autonomy and annual sunlight exposure. Moreover, the building energy consumption with these design variables was analyzed by using energy simulation. As a result, the daylighting was improved with the increase in WWRs and the tinted double glazing, while these design options can cause overheating in a residential building. Among types of glazing, the double pane windows with a low-E coating showed better energy performance. Based on the results, it is necessary to find the proper design variables that can balance the daylighting and energy performance in residential buildings in hot climates.

scholarly journals How Climate Trends Impact on the Thermal Performance of a Typical Residential Building in Madrid

Energies ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 237 ◽  
Author(s):  
S. Soutullo ◽  
E. Giancola ◽  
M. J. Jiménez ◽  
J. A. Ferrer ◽  
M. N. Sánchez
Keyword(s):  
Residential Buildings ◽  
Minimum Energy ◽  
Residential Building ◽  
Energy Performance ◽  
Weather Data ◽  
Design Strategies ◽  
Climate Trends ◽  
Average Value ◽  
Minimum Energy Consumption ◽  
The Impact

Based on the European energy directives, the building sector has to provide comfortable levels for occupants with minimum energy consumption as well as to reduce greenhouse gas emissions. This paper aims to compare the impact of climate change on the energy performance of residential buildings in order to derive potential design strategies. Different climate file inputs of Madrid have been used to quantify comparatively the thermal needs of two reference residential buildings located in this city. One of them represents buildings older than 40 years built according to the applicable Spanish regulations prior to 1979. The other refers to buildings erected in the last decade under more energy-restrictive constructive regulations. Three different climate databases of Madrid have been used to assess the impact of the evolution of the climate in recent years on the thermal demands of these two reference buildings. Two of them are typical meteorological years (TMY) derived from weather data measured before 2000. On the contrary, the third one is an experimental file representing the average values of the meteorological variables registered in Madrid during the last decade. Annual and monthly comparisons are done between the three climate databases assessing the climate changes. Compared to the TMYs databases, the experimental one records an average air temperature of 1.8 °C higher and an average value of relative humidity that is 9% lower.

Application of Water-Cooled Air-Conditioning for High-Rise Residential Buildings

2010 ◽  
Author(s):  
Hua Chen ◽  
Qianqian Di
Keyword(s):  
Energy Consumption ◽  
Empirical Model ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Operation Performance ◽  
Air Conditioners ◽  
High Rise ◽  
Set Up

To improve the applicability of water-cooled air-conditioners in the domestic sector, the development of a prediction model for energy performance analysis is needed. This paper addressed the development of an empirical model for predicting the operation performance and the annual energy consumption for the use of water-cooled air-conditioners. An experimental prototype was set up and tested in an environmental chamber in validating the empirical model. The predictions compared well with the experimental results. Furthermore, a high-rise residential building whole-year energy consumption simulation on applications of water-cooled air conditioners in South china was also analyzed. The results show 20.4% energy savings over air-cooled units while the increase in water-side consumption is 31.1%. The overall energy savings were estimated at 16.2% when including the additional water costs.

ENHANCING THE DAYLIGHT AND ENERGY PERFORMANCE OF EXTERNAL SHADING DEVICES IN HIGH-RISE RESIDENTIAL BUILDINGS IN DENSE URBAN TROPICS

2021 ◽  
Vol 16 (3) ◽  
pp. 87-108
Author(s):  
Nadeeka Jayaweera ◽  
Upendra Rajapaksha ◽  
Inoka Manthilake
Keyword(s):  
Residential Buildings ◽  
Residential Building ◽  
Energy Performance ◽  
Simulation Software ◽  
Baseline Scenario ◽  
Building Model ◽  
High Rise ◽  
Lighting Energy ◽  
Shading Devices

ABSTRACT This study examines the daylight and energy performance of 27 external shading scenarios in a high-rise residential building in the urban tropics. The cooling energy, daytime lighting energy and the spatial daylight autonomy (sDA) of the building model were simulated in Rhino3D and Grasshopper simulation software. The best performance scenario (vertical and horizontal shading on the twentieth floor, horizontal shading only for the eleventh floor and no shading for the second floor) satisfied 75 sDA(300lx|50) with corresponding annual enery performance of 16%–20% in the cardinal directions. The baseline scenario, which is the current practice of providing balconies on all floors, reduced daylight to less than 75 sDA on the eleventh and second floor, even though it had higher annual enery performance (19%–24%) than the best performance scenario. Application of the design principles to a case study indicated that 58% of the spaces had over 75 sDA for both Baseline and Best performance scenarios, while an increase in enery performance of 1%–3% was found in the Best performance scenario compared to the Baseline.

scholarly journals Passive Design Strategies for Energy Efficient Buildings in the Arabian Desert

2022 ◽  
Vol 7 ◽  
Author(s):  
Nedhal Al-Tamimi
Keyword(s):  
Energy Consumption ◽  
Thermal Insulation ◽  
Residential Buildings ◽  
Green Roofs ◽  
Base Case ◽  
Design Strategies ◽  
Total Energy Consumption ◽  
Building Envelopes ◽  
Passive Design ◽  
Shading Devices

This study aims to assess passive design features through the extensive modifications of building envelopes to affect the energy efficiency of residential buildings in hot arid climates. In support of the aim of this research, the annual electric energy bill of a typical residential building in Sharurah was collected and analyzed. Then, the DesignBuilder simulation program was used to investigate how different modifications of building envelopes could affect the energy consumption of the residential buildings under common scenarios. Varied thermal insulation, different types of glass, shading devices, and green roof were investigated with this perspective. The simulation results show that thermal insulation can significantly reduce annual energy consumption by as high as 23.6%, followed by green roofs. In contrast, shading devices and glazing system types were fewer superiors. The results also indicate that the effective combination of certain strategies can reduce total energy consumption by 35.4% relative to the base case (BC) of this research.

scholarly journals Energy performance diagnosis for the residential building façade in Algeria

2021 ◽  
Author(s):  
Messaouda Rais ◽  
Adel Boumerzoug ◽  
Balint Baranyai
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Simulation Software ◽  
Efficient Design ◽  
Design Standards ◽  
Quality Performance ◽  
Performance Diagnosis

AbstractAs it is clear, worldwide buildings are the largest consumer of the final energy consumption. In Algeria, it has been reported that 33% of the overall energy consumption was attributed to buildings. This is due to the design and constructional techniques of the residential buildings, which do not address the local climatic condition. To assess this situation, the study is focused on analyzing the existing residential buildings in Algeria, in terms of energy, thermal, daylight, and indoor air quality performance, using a dynamic simulation software. Typical building design in a hot and dry climate was selected. The results revealed that the existing residential buildings do not comply with the energy-efficient design standards. It was concluded that further strategies should be applied in this sector, in terms of building design, materials, and façade configuration.

scholarly journals Analysis of the Effects of Strengthening Building Energy Policy on Multifamily Residential Buildings in South Korea

2020 ◽  
Vol 12 (9) ◽  
pp. 3566
Author(s):  
Byung Chang Kwag ◽  
Sanghee Han ◽  
Gil Tae Kim ◽  
Beobjeon Kim ◽  
Jong Yeob Kim
Keyword(s):  
Energy Consumption ◽  
South Korea ◽  
Energy Policy ◽  
Energy Demand ◽  
Residential Buildings ◽  
Building Energy ◽  
Energy Performance ◽  
Primary Energy ◽  
Building Envelope ◽  
Primary Energy Consumption

The purposes of this study were to overview the building-energy policy and regulations in South Korea to achieve energy-efficient multifamily residential buildings and analyze the effects of strengthening the building design requirements on their energy performances. The building energy demand intensity showed a linear relationship with the area-weighted average U-values of the building envelope. However, improving the thermal properties of the building envelope was limited to reducing the building-energy demand intensity. In this study, the effects of various energy conservation measures (ECMs) on the building-energy performance were compared. Among the various ECMs, improving the boiler efficiency was found to be the most efficient measure for reducing the building-energy consumption in comparison to other ECMs, whereas the building envelope showed the least impact, because the current U-values are low. However, in terms of the primary energy consumption, the most efficient ECM was the lighting power density because of the different energy sources used by various ECMs and the different conversion factors used to calculate the primary energy consumption based on the source type. This study showed a direction for updating the building-energy policy and regulations, as well as the potential of implementing ECMs, to improve the energy performances of Korean multifamily residential buildings.

scholarly journals Verification of Energy Usage Based on Standard Building Model Development of Low-Rise Residential Buildings in South Korea

2021 ◽  
Vol 2021 ◽  
pp. 1-23
Author(s):  
KyungSoo Kim ◽  
DongChul Yoo ◽  
ChangHo Choi ◽  
HyangIn Jang
Keyword(s):  
Energy Consumption ◽  
Standard Model ◽  
South Korea ◽  
Residential Buildings ◽  
Model Development ◽  
Energy Performance ◽  
Current Status ◽  
Energy Usage ◽  
Total Energy Consumption ◽  
Significance Level

The energy consumption of low-rise residential buildings in South Korea exceeds the targets set in national policies and the standards of other countries. Moreover, there are insufficient policies in place to improve the energy performance of existing low-rise residential buildings and no means to investigate the current status. A standard model enables cost-effective and fast load forecasting and can also be used to establish long-term policies through evaluation of energy saving in buildings before and after the application of energy policies. This study developed a standard model for predicting energy consumption by reflecting the characteristics of low-rise residential buildings in Korea. The standard model was developed based on reliable related standards, national statistical data, and national reports, and the energy variables applied were validated through a sensitivity analysis. Surveys and field measurements were conducted to investigate the energy usage of 70 households in low-rise residential buildings in Korea, and the developed model was validated through comparison with the actual energy usage data. Consequently, the total energy consumption error rate was 12.67% (R2 value: 0.8164), with a significance level higher than 80%, which indicated that the developed model was highly efficient and reliable.

scholarly journals Towards climate resilient residential buildings: learning from traditional typologies

2021 ◽  
Vol 2042 (1) ◽  
pp. 012146
Author(s):  
D Mohaibesh ◽  
S Monna ◽  
H Qadi ◽  
R Sokkar
Keyword(s):  
Energy Consumption ◽  
Rural Areas ◽  
Architectural Design ◽  
Energy Savings ◽  
Residential Buildings ◽  
Vernacular Architecture ◽  
Residential Building ◽  
Design Strategies ◽  
Heating And Cooling ◽  
Proposed Model

Abstract Climate-resilient buildings in Palestine can play an important role in a more sustainable residential building sector. This paper aims at evaluating the effects of adopting architectural design strategies and material technologies from vernacular architecture to create a new climate-resilient building. The paper targets single houses as these represent the majority of residential buildings in suburban and rural areas, and are similar to the vernacular architecture in size and functionality. The EDSL Tas simulation tool was used to assess the thermal performance and energy savings in the proposed model compared with traditional houses and modern typical houses, in two different climatic zones. The proposed climate-resilient house has materials and design strategies derived from vernacular architecture, in addition to the use of thermal insulation. The results show that the proposed house is more climate-resilient compared to modern houses. In cold winter and hot summer climates, the proposed model presents a total annual heating and cooling energy consumption of 59% less than typical modern houses, and 5% more than old buildings. In hot arid summer and warm winter climates, the proposed house presents a total annual heating and cooling energy consumption of 58% less than a modern typical house and 8% more than the traditional house.

Sign in / Sign up

Export Citation Format

Share Document