scholarly journals Combined Engineering—Statistical Method for Assessing Solar Photovoltaic Potential on Residential Rooftops: Case of Laghouat in Central Southern Algeria

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1626
Author(s):  
Meskiana Boulahia ◽  
Kahina Amal Djiar ◽  
Miguel Amado
Keyword(s):  
Energy Efficiency ◽  
Residential Buildings ◽  
Geographical Information ◽  
Electricity Production ◽  
Valuable Insight ◽  
Pv Systems ◽  
Net Zero ◽  
Technical Potential ◽  
Realistic Assessment ◽  
Adaptive Policies

Solar energy planning becomes crucial to develop adaptive policies ensuring both energy efficiency and climate change mitigation. Cities, particularly building’s rooftops, constitute a promising infrastructure for enabling the use of locale solar resources. This study proposes a combined engineering–statistical methodology to assess the photovoltaic potential of residential rooftops. Using validated algorithms for solar simulation and geographical information system (GIS) for spatial dissemination, the proposed methodology deals with the lack of data and allows an accurate investigation of the geographical and technical potential. Applied to the municipality of Laghouat, the results reveal that suitable rooftops areas for PV installations in the examined typologies were approximately between 18 and 35%. Moreover, the deployment of distributed PV systems on residential rooftops provides significant technical potential, which could cover up to 55% of the annual electricity needs. These original findings offer a realistic assessment of the usable solar potential within municipalities, which helps decision-makers establish energy efficiency strategies by reducing energy consumption and increasing the share of renewable electricity production. Additionally, the discussion offers valuable insight into energy management and investigates eventual energy sharing among residential buildings to achieve a net-zero energy balance at the municipal level.

scholarly journals A Comparative Assessment for the Potential Energy Production from PV Installation on Residential Buildings

2020 ◽  
Vol 12 (24) ◽  
pp. 10344
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Mohammed Itma
Keyword(s):  
Potential Energy ◽  
Energy Production ◽  
Residential Buildings ◽  
Electricity Consumption ◽  
Residential Building ◽  
Electricity Production ◽  
Energy Sustainability ◽  
Pv Systems ◽  
Residential Units ◽  
Future Consumption

This paper targets the future energy sustainability and aims to estimate the potential energy production from installing photovoltaic (PV) systems on the rooftop of apartment’s residential buildings, which represent the largest building sector. Analysis of the residential building typologies was carried out to select the most used residential building types in terms of building roof area, number of floors, and the number of apartments on each floor. A computer simulation tool has been used to calculate the electricity production for each building type, for three different tilt angles to estimate the electricity production. Tilt angle, spacing between the arrays, the building shape, shading from PV arrays, and other roof elements were analyzed for optimum and maximum electricity production. The electricity production for each household has been compared to typical household electricity consumption and its future consumption in 2030. The results show that installing PV systems on residential buildings can speed the transition to renewable energy and energy sustainability. The electricity production for building types with 2–4 residential units can surplus their estimated future consumption. Building types with 4–8 residential units can produce their electricity consumption in 2030. Building types of 12–24 residential units can produce more than half of their 2030 future consumption.

scholarly journals ENERGY EFFICIENCY IN RESIDENTIAL BUILDINGS, LESS STRAIGHT FORWARD THEN PRESUMED

2018 ◽  
Vol 13 (1) ◽  
Author(s):  
Hugo Hens
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Use ◽  
Low Voltage ◽  
Residential Buildings ◽  
Primary Energy ◽  
Heating And Cooling ◽  
Net Zero ◽  
Energy Conserving ◽  
New Construction

Since the 1990s, the successive EU directives and related national or regional legislations require new construction and retrofits to be as much as possible energy-efficient. Several measures that should stepwise minimize the primary energy use for heating and cooling have become mandated as requirement. However, in reality, related predicted savings are not seen in practice. Two effects are responsible for that. The first one refers to dweller habits, which are more energy-conserving than the calculation tools presume. In fact, while in non-energy-efficient ones, habits on average result in up to a 50% lower end energy use for heating than predicted. That percentage drops to zero or it even turns negative in extremely energy-efficient residences. The second effect refers to problems with low-voltage distribution grids not designed to transport the peaks in electricity whensunny in summer. Through that, a part of converters has to be uncoupled now and then, which means less renewable electricity. This is illustrated by examples that in theory should be net-zero buildings due to the measures applied and the presence of enough photovoltaic cells (PV) on each roof. We can conclude that mandating extreme energy efficiency far beyond the present total optimum value for residential buildings looks questionable as a policy. However, despite that, governments and administrations still seem to require even more extreme measurements regarding energy efficiency.

scholarly journals Targeting Energy Efficiency through Air Conditioning Operational Modes for Residential Buildings in Tropical Climates, Assisted by Solar Energy and Thermal Energy Storage. Case Study Brazil

2021 ◽  
Vol 13 (22) ◽  
pp. 12831
Author(s):  
Alex Ximenes Naves ◽  
Laureano Jiménez Esteller ◽  
Assed Naked Haddad ◽  
Dieter Boer
Keyword(s):  
Energy Efficiency ◽  
Life Cycle ◽  
Energy Storage ◽  
Air Conditioning ◽  
Residential Buildings ◽  
Zero Energy ◽  
Net Zero Energy ◽  
Net Zero ◽  
Life Cycle Perspective ◽  
Operational Modes

Economy and parsimony in the consumption of energy resources are becoming a part of common sense in practically all countries, although the effective implementation of energy efficiency policies still has a long way to go. The energy demand for residential buildings is one of the most significant energy sinks. We focus our analysis on one of the most energy-consuming systems of residential buildings located in regions of tropical climate, which are cooling systems. We evaluate to which degree the integration of thermal energy storage (TES) and photovoltaic (PV) systems helps to approach an annual net zero energy building (NZEB) configuration, aiming to find a feasible solution in the direction of energy efficiency in buildings. To conduct the simulations, an Energy Efficiency Analysis Framework (EEAF) is proposed. A literature review unveiled a potential knowledge gap about the optimization of the ASHRAE operational modes (full storage load, load leveled, and demand limiting) for air conditioning/TES sets using PV connected to the grid. A hypothetical building was configured with detailed loads and occupation profiles to simulate different configurations of air conditioning associated with TES and a PV array. Using TRNSYS software, a set of scenarios was simulated, and their outputs are analyzed in a life cycle perspective using life cycle costing (LCC). The modeling and simulation of different scenarios allowed for identifying the most economic configurations from a life cycle perspective, within a safe range of operability considering the energy efficiency and consequently the sustainability aspects of the buildings. The EEAF also supports other profiles, such as those in which the occupancy of residential buildings during the day is increased due to significant changes in people’s habits, when working and studying in home office mode, for example. These changes in habits should bring a growing interest in the adoption of solar energy for real-time use in residential buildings. The results can be used as premises for the initial design or planning retrofits of buildings, aiming at the annual net zero energy balance.

scholarly journals Potential Electricity Production by Installing Photovoltaic Systems on the Rooftops of Residential Buildings in Jordan: An Approach to Climate Change Mitigation

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 496
Author(s):  
Sameh Monna ◽  
Ramez Abdallah ◽  
Adel Juaidi ◽  
Aiman Albatayneh ◽  
Antonio Jesús Zapata-Sierra ◽  
...  
Keyword(s):  
Climate Change ◽  
Residential Buildings ◽  
Comparative Method ◽  
Electricity Consumption ◽  
High Energy ◽  
Electricity Production ◽  
Energy Prices ◽  
Pv Systems ◽  
Electricity Use ◽  
Urban Energy

Countries with limited natural resources and high energy prices, such as Jordan, face significant challenges concerning energy consumption and energy efficiency, particularly in the context of climate change. Residential buildings are the most energy-consuming sector in Jordan. Photovoltaic (PV) systems on the rooftops of residential buildings can solve the problem of increasing electricity demands and address the need for more sustainable energy systems. This study calculated the potential electricity production from PV systems installed on the available rooftops of residential buildings and compared this production with current and future electricity consumption for residential households. A simulation tool using PV*SOL 2021 was used to estimate electricity production and a comparative method was used to compare electricity production and consumption. The results indicated that electricity production from PV systems installed on single houses and villas can cover, depending on the tilt angle and location of the properties, three to eight times their estimated future and current electricity use. PV installation on apartment buildings can cover 0.65 to 1.3 times their future and current electricity use. The surplus electricity produced can be used to mitigate urban energy demands and achieve energy sustainability.

Fiscal deduction in Italy for energy efficiency in residential buildings: Some insights

2017 ◽  
pp. 15-29
Author(s):  
Domenico Prisinzano ◽  
Alessandro Federici ◽  
Amalia Martelli ◽  
Chiara Martini ◽  
Roberto Moneta
Keyword(s):  
Energy Efficiency ◽  
Residential Buildings

scholarly journals Exploring the Effects of Industrial Structure, Technology, and Energy Efficiency on China’s Carbon Intensity and Their Contributions to Carbon Intensity Target

2020 ◽  
Vol 12 (19) ◽  
pp. 8016
Author(s):  
Feng Wang ◽  
Min Wu ◽  
Jiachen Hong
Keyword(s):  
Energy Efficiency ◽  
Energy Saving ◽  
Historical Development ◽  
Industrial Development ◽  
Industrial Structure ◽  
Electricity Production ◽  
Mitigation Measures ◽  
Carbon Intensity ◽  
Intermediate Input ◽  
Residential Energy

To achieve the national carbon intensity (NCI) target, China should adopt effective mitigation measures. This paper aims to examine the effects of key mitigation measures on NCI. Using the input-output table in 2017, this paper establishes the elasticity model of NCI to investigate the effects of industrial development, intermediate input coefficients, energy efficiency, and residential energy saving on NCI, and further evaluates the contributions of key measures on achieving NCI target. The results are shown as follows. First, the development of seven sectors will promote the increase of NCI while that of 21 sectors will reduce NCI. Second, NCI will decrease significantly with the descending of intermediate input coefficients of sectors, especially electricity production and supply. Third, improving energy efficiency and residential energy saving degree could reduce NCI, but the latter has limited contribution. Fourth, the development of all sectors will reduce NCI by 10.11% in 2017–2022 if sectors could continue the historical development trends. Fifth, assuming that sectors with rising intermediate input coefficients would keep their coefficients unchanged in the predicting period and sectors with descending coefficients would continue the historical descending trend, the improvement of technology and management of all sectors will reduce NCI by 14.02% in 2017–2022.

scholarly journals Contradictory Conservation: The Role of Leadership in Shaping Energy Efficiency Culture in Urban Residential Cooperative Buildings

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 648
Author(s):  
Elizabeth Hewitt
Keyword(s):  
Energy Efficiency ◽  
Cost Efficiency ◽  
Board Member ◽  
Environmental Concern ◽  
Residential Buildings ◽  
Organizational Structures ◽  
Leadership Roles ◽  
Strong Energy ◽  
Informal Leaders

In addition to formalized leadership roles within organizations, leadership can also influence members through informal channels. This work argues that multifamily residential buildings can be viewed as organizations and, as such, explores the influence that informal leaders can wield in shaping culture around the motivation for conserving energy. This work draws on qualitative fieldwork conducted in a Brooklyn cooperative building. Findings indicate that the study building benefitted from the leadership of a long-standing board member, which contributed to the implementation of a number of energy efficiency initiatives. Interestingly, this leadership also led to a culture of cost efficiency over environmental concern as the motivating force behind these initiatives. This narrative was well disseminated, with most residents reporting that the building does not have a culture of conservation, despite a strong energy efficiency leaning. Thus, this work posits that leadership can greatly shape perception and culture around energy but can also be leveraged to craft a more environmentally-motivated conservation culture. It also argues that leadership can be complementary to decentralized organizational structures, and that creative mechanisms in residential buildings can capitalize on both, allowing members at all levels of the organization more influence in shaping the building’s culture.

Sign in / Sign up

Export Citation Format

Share Document