scholarly journals ENERGY EFFICIENCY IN RESIDENTIAL BUILDINGS, LESS STRAIGHT FORWARD THEN PRESUMED

2018 ◽  
Vol 13 (1) ◽  
Author(s):  
Hugo Hens
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Use ◽  
Low Voltage ◽  
Residential Buildings ◽  
Primary Energy ◽  
Heating And Cooling ◽  
Net Zero ◽  
Energy Conserving ◽  
New Construction

Since the 1990s, the successive EU directives and related national or regional legislations require new construction and retrofits to be as much as possible energy-efficient. Several measures that should stepwise minimize the primary energy use for heating and cooling have become mandated as requirement. However, in reality, related predicted savings are not seen in practice. Two effects are responsible for that. The first one refers to dweller habits, which are more energy-conserving than the calculation tools presume. In fact, while in non-energy-efficient ones, habits on average result in up to a 50% lower end energy use for heating than predicted. That percentage drops to zero or it even turns negative in extremely energy-efficient residences. The second effect refers to problems with low-voltage distribution grids not designed to transport the peaks in electricity whensunny in summer. Through that, a part of converters has to be uncoupled now and then, which means less renewable electricity. This is illustrated by examples that in theory should be net-zero buildings due to the measures applied and the presence of enough photovoltaic cells (PV) on each roof. We can conclude that mandating extreme energy efficiency far beyond the present total optimum value for residential buildings looks questionable as a policy. However, despite that, governments and administrations still seem to require even more extreme measurements regarding energy efficiency.

Design Optimization of Energy Efficient Office Buildings in Tunisia

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Pyeongchan Ihm ◽  
Moncef Krarti
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
High Performance ◽  
Energy Use ◽  
Cost Effective ◽  
Energy Performance ◽  
High Energy ◽  
Office Buildings ◽  
Optimization Approach ◽  
Heating And Cooling

Optimal and cost-effective energy efficiency design and operation options are evaluated for office buildings in Tunisia. In the analysis, several design and operation features are considered including orientation, window location and size, high performance glazing types, wall and roof insulation levels, energy efficient lighting systems, daylighting controls, temperature settings, and energy efficient heating and cooling systems. First, the results of the optimization results from a sequential search technique are compared against those obtained by a more time consuming brute-force optimization approach. Then, the optimal design features for a prototypical office building are determined for selected locations in Tunisia. The optimization results indicate that utilizing daylighting controls, energy efficient lighting fixtures, and low-e double glazing, and roof insulation are required energy efficiency measures to design high energy performance office buildings throughout climatic zones in Tunisia. In particular, it is found that implementing these measures can cost-effectively reduce the annual energy use by 50% compared to the current design practices of office buildings in Tunisia.

scholarly journals Exploring Climate-Change Impacts on Energy Efficiency and Overheating Vulnerability of Bioclimatic Residential Buildings under Central European Climate

2021 ◽  
Vol 13 (12) ◽  
pp. 6791
Author(s):  
Luka Pajek ◽  
Mitja Košir
Keyword(s):  
Climate Change ◽  
Energy Efficiency ◽  
Energy Efficient ◽  
Energy Demand ◽  
Energy Use ◽  
Residential Buildings ◽  
Building Design ◽  
Temperate Climate ◽  
Design Parameters ◽  
Central European

Climate change is expected to expose the locked-in overheating risk concerning bioclimatic buildings adapted to a specific past climate state. The study aims to find energy-efficient building designs which are most resilient to overheating and increased cooling energy demands that will result from ongoing climate change. Therefore, a comprehensive parametric study of various passive building design measures was implemented, simulating the energy use of each combination for a temperate climate of Ljubljana, Slovenia. The approach to overheating vulnerability assessment was devised and applied using the increase in cooling energy demand as a performance indicator. The results showed that a B1 heating energy efficiency class according to the Slovenian Energy Performance Certificate classification was the highest attainable using the selected passive design parameters, while the energy demand for heating is projected to decrease over time. In contrast, the energy use for cooling is in general projected to increase. Furthermore, it was found that, in building models with higher heating energy use, low overheating vulnerability is easier to achieve. However, in models with high heating energy efficiency, very high overheating vulnerability is not expected. Accordingly, buildings should be designed for current heating energy efficiency and low vulnerability to future overheating. The paper shows a novel approach to bioclimatic building design with global warming adaptation integrated into the design process. It delivers recommendations for the energy-efficient, robust bioclimatic design of residential buildings in the Central European context, which are intended to guide designers and policymakers towards a resilient and sustainable built environment.

CoNNECT: Data Analytics for Energy Efficient Communities

2012 ◽  
Author(s):  
O. A. Omitaomu ◽  
B. L. Bhaduri ◽  
C. S. Maness ◽  
J. B. Kodysh ◽  
A. M. Noranzyk
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Efficient ◽  
Data Analytics ◽  
Energy Use ◽  
Residential Buildings ◽  
Weather Data ◽  
Energy Usage ◽  
The Public ◽  
Utility Companies

Energy efficiency is the lowest cost option being promoted for achieving a sustainable energy policy. Thus, there have been some innovations to reduce residential and commercial energy usage. There have also been calls to the utility companies to give customers access to timely, useful, and actionable information about their energy use, in order to unleash additional innovations in homes and businesses. Hence, some web-based tools have been developed for the public to access and compare energy usage data. In order to advance on these efforts, we propose a data analytics framework called Citizen Engagement for Energy Efficient Communities (CoNNECT). On the one hand, CoNNECT will help households to understand (i) the patterns in their energy consumption over time and how those patterns correlate with weather data, (ii) how their monthly consumption compares to other households living in houses of similar size and age within the same geographic areas, and (iii) what other customers are doing to reduce their energy consumption. We hope that the availability of such data and analysis to the public will facilitate energy efficiency efforts in residential buildings. These capabilities formed the public portal of the CoNNECT framework. On the other hand, CoNNECT will help the utility companies to better understand their customers by making available to the utilities additional datasets that they naturally do not have access to, which could help them develop focused services for their customers. These additional capabilities are parts of the utility portal of the CoNNECT framework. In this paper, we describe the CoNNECT framework, the sources of the data used in its development, the functionalities of both the public and utility portals, and the application of empirical mode decomposition for decomposing usage signals into mode functions with the hope that such mode functions could help in clustering customers into unique groups and in developing guidelines for energy conservation.

scholarly journals Energy Efficiency of Water Heating Systems in Single-Family Dwellings in Brazil

Water ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 1068 ◽  
Author(s):  
Juliana May Sangoi ◽  
Enedir Ghisi
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Efficient ◽  
Residential Buildings ◽  
Heating System ◽  
Primary Energy ◽  
Solar Heating ◽  
Primary Energy Consumption ◽  
Single Family ◽  
Heating Systems

The objective of this paper was to compare primary energy consumption and energy efficiency during the operation phase of different types and combinations of water heating systems in single-family dwellings. Systems with an electric shower, liquefied petroleum gas heater, and solar heater with electric backup were analysed. The analysis was performed by means of computer simulation using EnergyPlus. Three Brazilian cities with different climates were assessed, i.e., Curitiba, Brasília and Belém. The systems were compared in terms of final energy and primary energy consumption. Results showed that systems with an electric shower, which have a lower water flow rate, led to lower primary energy consumption. The solar heating system combined with an electric shower was the option with the lowest energy consumption, and the solar heating system with a heating element in the storage tank was the option that consumed more energy. The systems were sized according to the requirements of the Brazilian energy efficiency labelling for residential buildings, and the efficiency level was compared to the results of primary energy consumption. The electric shower was found to be the third lowest energy consumer, but it was ranked the least energy efficient by Brazilian labelling, while systems with high energy consumption, such as gas heaters and solar heaters with a heating element in the storage tank, were ranked the most energy efficient. Therefore, a review of the requirements and methodology of the Brazilian energy efficiency labelling for residential buildings is recommended in order to encourage the use of truly efficient systems. Public policies that encourage solar heating systems should establish requirements regarding the configuration and sizing both the solar heating system and the backup system.

Integrated Study of a Minimum Exergy Destruction Building Conditioning System

2013 ◽  
Author(s):  
Fabrizio Ferraro ◽  
Enrico Sciubba ◽  
Claudia Toro
Keyword(s):  
Energy Use ◽  
Residential Buildings ◽  
Primary Energy ◽  
Heat Pumps ◽  
Comfort Level ◽  
Model Case ◽  
Ground Source Heat Pumps ◽  
Energy Supply System ◽  
San Lorenzo ◽  
Heating And Cooling

The relatively low average conversion efficiency of air-conditioning systems and the recently imposed upper bounds to the final energy use in the heating and cooling of residential buildings suggest to consider new approaches to design less energy intensive systems. An integrated, exergy-based approach for the optimal matching of internal and external heating plants in building conditioning systems has been proposed — and its theoretical basis discussed — in a previous paper. The procedure allows the designer to obtain a pseudo-optimal integration of the building and its heating plant (heating element + primary energy supply system) and to identify, among a set of alternative solutions for the building under examination, the thermodynamically most efficient plant. The objective of this paper is to validate the method on a real building in order to demonstrate its practical applicability. The large “Chiostro Hall” (220 square meters, 1245 cubic meters) of the Engineering School of the University “Sapienza” of Roma has been employed as the benchmark. This is the main hall of the building, reconverted from a previously existing Renaissance structure, the old convent of San Lorenzo in Panisperna, which was in turn built on the ruins of a pre-christian roman basilica and of a portion of emperor Nero’s Domus Aurea. The hall consists of two semi-connected rooms, originally the Refectory of the old Convent, that are now used for public events, conferences and graduation ceremonies. This structure can be considered as a model case for similar halls in historical buildings, so that the guidelines deriving from the present study can be extended to other similar environments. The current heating elements are traditional radiators: in our simulations, they have been successively replaced by other elements such as floor and ceiling heating panels and fan coils. Each one of these configurations (the hall and its heating elements) has been modeled and simulated via a commercial CFD code to generate detailed thermal maps and to compute the actual thermal load. Different global “heating chains” were then modeled by coupling solar and hybrid photovoltaic-thermal (PV/T) panels with radiant panels and ground-source heat pumps with fan coils and radiant heating panels. Finally by means of a process simulator software each one of these configurations was analyzed to identify the one that provides the same comfort level with the least exergy use. The procedure also allows to calculate the savings obtained in terms of primary resources.

Buildings

2017 ◽  
Author(s):  
Peter Rez
Keyword(s):  
Heat Transfer ◽  
Heat Pump ◽  
Energy Efficient ◽  
Energy Use ◽  
Fossil Fuel ◽  
Local Climate ◽  
Heating And Cooling ◽  
The Difference ◽  
As If

Most of the energy used by buildings goes into heating and cooling. For small buildings, such as houses, heat transfer by conduction through the sides is as much as, if not greater than, the heat transfer from air exchanges with the outside. For large buildings, such as offices and factories, the greater volume-to-surface ratio means that air exchanges are more significant. Lights, people and equipment can make significant contributions. Since the energy used depends on the difference in temperature between the inside and the outside, local climate is the most important factor that determines energy use. If heating is required, it is usually more efficient to use a heat pump than to directly burn a fossil fuel. Using diffuse daylight is always more energy efficient than lighting up a room with artificial lights, although this will set a limit on the size of buildings.

scholarly journals Towards Sustainable Energy Retrofitting, a Simulation for Potential Energy Use Reduction in Residential Buildings in Palestine

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3876
Author(s):  
Sameh Monna ◽  
Adel Juaidi ◽  
Ramez Abdallah ◽  
Aiman Albatayneh ◽  
Patrick Dutournie ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Residential Building ◽  
Simulation Models ◽  
Water Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Cooling Loads

Since buildings are one of the major contributors to global warming, efforts should be intensified to make them more energy-efficient, particularly existing buildings. This research intends to analyze the energy savings from a suggested retrofitting program using energy simulation for typical existing residential buildings. For the assessment of the energy retrofitting program using computer simulation, the most commonly utilized residential building types were selected. The energy consumption of those selected residential buildings was assessed, and a baseline for evaluating energy retrofitting was established. Three levels of retrofitting programs were implemented. These levels were ordered by cost, with the first level being the least costly and the third level is the most expensive. The simulation models were created for two different types of buildings in three different climatic zones in Palestine. The findings suggest that water heating, space heating, space cooling, and electric lighting are the highest energy consumers in ordinary houses. Level one measures resulted in a 19–24 percent decrease in energy consumption due to reduced heating and cooling loads. The use of a combination of levels one and two resulted in a decrease of energy consumption for heating, cooling, and lighting by 50–57%. The use of the three levels resulted in a decrease of 71–80% in total energy usage for heating, cooling, lighting, water heating, and air conditioning.

scholarly journals Humidity-Sensitive Demand-Controlled Ventilation Applied to Multi-Unit Residential Building – Performance and Energy Consumption in Dfb Continental Climate

2020 ◽  
Author(s):  
Jerzy Sowa ◽  
Maciej Mijakowski
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Energy Savings ◽  
Residential Buildings ◽  
Ventilation System ◽  
Residential Building ◽  
Primary Energy ◽  
Controlled Ventilation ◽  
Demand Controlled Ventilation ◽  
Continental Climate

A humidity-sensitive demand-controlled ventilation system is known for many years. It has been developed and commonly applied in regions with an oceanic climate. Some attempts were made to introduce this solution in Poland in a much severe continental climate. The article evaluates this system's performance and energy consumption applied in an 8-floor multi-unit residential building, virtual reference building described by the National Energy Conservation Agency NAPE, Poland. The simulations using the computer program CONTAM were performed for the whole hating season for Warsaw's climate. Besides passive stack ventilation that worked as a reference, two versions of humidity-sensitive demand-controlled ventilation were checked. The difference between them lies in applying the additional roof fans that convert the system to hybrid. The study confirmed that the application of demand-controlled ventilation in multi-unit residential buildings in a continental climate with warm summer (Dfb) leads to significant energy savings. However, the efforts to ensure acceptable indoor air quality require hybrid ventilation, which reduces the energy benefits. It is especially visible when primary energy use is analyzed.

scholarly journals Problems of energy-efficient construction in the Republic of Kazakhstan and the development of a methodology for determining the energy efficiency of buildings and structures

2020 ◽  
Vol 77 (4) ◽  
pp. 189-199
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Air Conditioning ◽  
Hot Water ◽  
Construction Sector ◽  
Progressive Development ◽  
Efficient Construction ◽  
New Construction ◽  
The Republic ◽  
Housing Facilities

The progressive development of the economy of the Republic of Kazakhstan is impossible without solving the issues of increasing energy efficiency and energy conservation. These issues are very relevant in the construction sector of Kazakhstan. Housing facilities, on average, consume 2-3 times more heat per square meter, than buildings in Europe. However, in Kazakhstan until now there is no methodology for determining the energy efficiency of buildings and structures that meets modern requirements. The methodology discussed in this article is harmonized with EU requirements and establishes a method for calculating the annual energy consumption of buildings for heating, hot water, ventilation and air conditioning, taking into account auxiliary energy for the operation of these systems, and is intended for use in the design of new construction, reconstruction (modernization) residential and public buildings, as well as operated buildings and structures.

Sign in / Sign up

Export Citation Format

Share Document