scholarly journals Simulation Modeling of a Photovoltaic-Green Roof System for Energy Cost Reduction of a Building: Texas Case Study

Energies ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5443
Author(s):  
Sojung Kim ◽  
Burchan Aydin ◽  
Sumin Kim
Keyword(s):  
Energy Cost ◽  
Polynomial Regression ◽  
Green Roof ◽  
Simulation Software ◽  
Maximum Temperature ◽  
Thermal Impact ◽  
Estimation Model ◽  
Sustainable Building ◽  
Roof System ◽  
Average Maximum

This study aims at introducing a modeling and simulation approach for a green roof system which can reduce energy cost of a building exposed to high temperatures throughout the summer season. First, to understand thermal impact of a green roof system on a building surface, a field-based study has been conducted in Commerce, Texas, U.S., where the average maximum temperature in summer is 104 °F (40 °C). Two types of analyses were conducted: (1) comparison of temperature between different plant type via Analysis of variance (ANOVA) and (2) polynomial regression analysis to develop thermal impact estimation model based on air temperature and presence of a green roof. In addition, an agent-based simulation (ABS) model was developed via AnyLogic® University 8.6.0 simulation software, Chicago, IL, U.S., in order to accurately estimate energy cost and benefits of a building with a photovoltaic-green roof system. The proposed approach was applied to estimate energy reduction cost of the Keith D. McFarland Science Building at Texas A&M University, Commerce, Texas (33.2410° N, 95.9104° W). As a result, the proposed approach was able to save $740,325.44 in energy cost of a heating, ventilation, and air conditioning (HAVC) system in the subject building. The proposed approach will contribute to the implementation of a sustainable building and urban agriculture.

scholarly journals The Effect of the Thermal Mass of the Building Envelope on Summer Overheating of Dwellings in a Temperate Climate

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4117
Author(s):  
Tadeusz Kuczyński ◽  
Anna Staszczuk ◽  
Piotr Ziembicki ◽  
Anna Paluszak
Keyword(s):  
Building Materials ◽  
Heat Waves ◽  
Residential Buildings ◽  
Building Envelope ◽  
Temperate Climate ◽  
Maximum Temperature ◽  
Thermal Mass ◽  
Occupant Behavior ◽  
Average Maximum ◽  
Night Ventilation

The main objective of this paper is to demonstrate the effectiveness of increasing the thermal capacity of a residential building by using traditional building materials to reduce the risk of its excessive overheating during intense heat waves in a temperate climate. An additional objective is to show that the use of this single passive measure significantly reduces the risk of overheating in daytime rooms, but also, though to a much lesser extent, in bedrooms. Increasing the thermal mass of the room from light to a medium heavy reduced the average maximum daily temperature by 2.2K during the first heat wave and by 2.6K during the other two heat waves. The use of very heavy construction further reduced the average maximum temperature for the heat waves analyzed by 1.4K, 1.2K and 1.7K, respectively, giving a total possible reduction in maximum daily temperatures in the range of 3.6 °C, 3.8 °C and 4.3 °C. A discussion of the influence of occupant behavior on the use of night ventilation and external blinds was carried out, finding a significant effect on the effectiveness of the use of both methods. The results of the study suggest that in temperate European countries, preserving residential construction methods with heavy envelopes and partitions could significantly reduce the risk of overheating in residential buildings over the next few decades, without the need for night ventilation or external blinds, whose effectiveness is highly dependent on individual occupant behavior.

scholarly journals The effect of average temperature on suicide rates in five urban California counties, 1999–⁠2019: an ecological time series analysis

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Sierra Cheng ◽  
Rebecca Plouffe ◽  
Stephanie M. Nanos ◽  
Mavra Qamar ◽  
David N. Fisman ◽  
...  
Keyword(s):  
Public Health ◽  
Suicide Rate ◽  
Minimum Temperature ◽  
The United States ◽  
Additive Models ◽  
Maximum Temperature ◽  
Mortality Data ◽  
Average Temperature ◽  
Suicide Rates ◽  
Average Maximum

Abstract Background Suicide is among the top 10 leading causes of premature morality in the United States and its rates continue to increase. Thus, its prevention has become a salient public health responsibility. Risk factors of suicide transcend the individual and societal level as risk can increase based on climatic variables. The purpose of the present study is to evaluate the association between average temperature and suicide rates in the five most populous counties in California using mortality data from 1999 to 2019. Methods Monthly counts of death by suicide for the five counties of interest were obtained from CDC WONDER. Monthly average, maximum, and minimum temperature were obtained from nCLIMDIV for the same time period. We modelled the association of each temperature variable with suicide rate using negative binomial generalized additive models accounting for the county-specific annual trend and monthly seasonality. Results There were over 38,000 deaths by suicide in California’s five most populous counties between 1999 and 2019. An increase in average temperature of 1 °C corresponded to a 0.82% increase in suicide rate (IRR = 1.0082 per °C; 95% CI = 1.0025–1.0140). Estimated coefficients for maximum temperature (IRR = 1.0069 per °C; 95% CI = 1.0021–1.0117) and minimum temperature (IRR = 1.0088 per °C; 95% CI = 1.0023–1.0153) were similar. Conclusion This study adds to a growing body of evidence supporting a causal effect of elevated temperature on suicide. Further investigation into environmental causes of suicide, as well as the biological and societal contexts mediating these relationships, is critical for the development and implementation of new public health interventions to reduce the incidence of suicide, particularly in the face increasing temperatures due to climate change.

scholarly journals Heat Transfer Measurement within Green Roof with Incinerated Municipal Solid Waste Aggregates

2021 ◽  
Vol 13 (13) ◽  
pp. 7115
Author(s):  
Mostafa Kazemi ◽  
Luc Courard ◽  
Julien Hubert
Keyword(s):  
Heat Transfer ◽  
Heat Resistance ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Green Roof ◽  
Insulation Material ◽  
Drainage Layer ◽  
Roof System ◽  
Substrate Layer ◽  
Significant Difference

A green roof is composed of a substrate and drainage layers which are fixed on insulation material and roof structure. The global heat resistance (Rc) within a green roof is affected by the humidity content of the substrate layer in which the coarse recycled materials can be used. Moreover, the utilization of recycled coarse aggregates such as incinerated municipal solid waste aggregate (IMSWA) for the drainage layer would be a promising solution, increasing the recycling of secondary resources and saving natural resources. Therefore, this paper aims to investigate the heat transfer across green roof systems with a drainage layer of IMSWA and a substrate layer including recycled tiles and bricks in wet and dry states according to ISO-conversion method. Based on the results, water easily flows through the IMSWAs with a size of 7 mm. Meanwhile, the Rc-value of the green roof system with the dry substrate (1.26 m2 K/W) was 1.7 times more than that of the green roof system with the unsaturated substrate (0.735 m2 K/W). This means that the presence of air-spaces in the dry substrate provided more heat resistance, positively contributing to heat transfer decrease, which is also dependent on the drainage effect of IMSWA. In addition, the Rc-value of the dry substrate layer was about twice that of IMSWA as the drainage layer. No significant difference was observed between the Rc-values of the unsaturated substrate layer and the IMSWA layer.

On the green roof system. Selection, state of the art and energy potential investigation of a system installed in an office building in Athens, Greece

2008 ◽  
Vol 33 (1) ◽  
pp. 173-177 ◽  
Author(s):  
A. Spala ◽  
H.S. Bagiorgas ◽  
M.N. Assimakopoulos ◽  
J. Kalavrouziotis ◽  
D. Matthopoulos ◽  
...  
Keyword(s):  
State Of The Art ◽  
Green Roof ◽  
Office Building ◽  
Energy Potential ◽  
Roof System ◽  
System Selection

Fuel and fire characteristics in savanna - woodland of West Africa in relation to grazing and dominant grass type

2007 ◽  
Vol 16 (5) ◽  
pp. 531 ◽  
Author(s):  
Patrice Savadogo ◽  
Didier Zida ◽  
Louis Sawadogo ◽  
Daniel Tiveau ◽  
Mulualem Tigabu ◽  
...  
Keyword(s):  
Prescribed Burning ◽  
Management Tool ◽  
Fuel Load ◽  
Maximum Temperature ◽  
Fire Intensity ◽  
Fire Behaviour ◽  
Savanna Woodland ◽  
Vegetation Height ◽  
Average Maximum ◽  
Dominant Grass

Fuel characteristics, fire behaviour and temperature were studied in relation to grazing, dominant grass type and wind direction in West African savanna–woodland by lighting 32 prescribed early fires. Grazing significantly reduced the vegetation height, total fuel load, and dead and live fuel fractions whereas plots dominated by perennial grasses had higher values for vegetation height, total fuel load and the quantity of live fuel load. Although fire intensity remained insensitive (P > 0.05) to any of these factors, fuel consumption was significantly (P = 0.021) reduced by grazing, rate of spread was faster in head fire (P = 0.012), and flame length was shorter in head fire than back fire (P = 0.044). The average maximum temperature was higher (P < 0.05) on non-grazed plots, on plots dominated by annual grasses, on plots subjected to head fire, and at the soil surface. Lethal temperature residence time showed a nearly similar trend to fire temperature. Wind speed and total fuel load were best predictors of fire behaviour parameters (R2 ranging from 0.557 to 0.862). It can be concluded that grazing could be used as a management tool to modify fire behaviour, back fire should be carried out during prescribed burning to lower fire severity, and the fire behaviour models can be employed to guide prescribed early fire in the study area.

scholarly journals Impact of Climate Change on Water Availability and Food Security of Nepal

2012 ◽  
pp. 59-63
Author(s):  
Roshan Kumar Mehta ◽  
Shree Chandra Shah
Keyword(s):  
Climate Change ◽  
Crop Production ◽  
Climatic Factors ◽  
Monsoon Season ◽  
Groundwater Table ◽  
Maximum Temperature ◽  
Aquatic Life ◽  
Temperature And Precipitation ◽  
Average Maximum ◽  
Water Scarce

The increase in the concentration of greenhouse gases (GHGs) in the atmosphere is widely believed to be causing climate change. It affects agriculture, forestry, human health, biodiversity, and snow cover and aquatic life. Changes in climatic factors like temperature, solar radiation and precipitation have potential to influence agrobiodiversity and its production. An average of 0.04°C/ year and 0.82 mm/year rise in annual average maximum temperature and precipitation respectively from 1975 to 2006 has been recorded in Nepal. Frequent droughts, rise in temperature, shortening of the monsoon season with high intensity rainfall, severe floods, landslides and mixed effects on agricultural biodiversity have been experienced in Nepal due to climatic changes. A survey done in the Chitwan District reveals that lowering of the groundwater table decreases production and that farmers are attracted to grow less water consuming crops during water scarce season. The groundwater table in the study area has lowered nearly one meter from that of 15 years ago as experienced by the farmers. Traditional varieties of rice have been replaced in the last 10 years by modern varieties, and by agricultural crops which demand more water for cultivation. The application of groundwater for irrigation has increased the cost of production and caused severe negative impacts on marginal crop production and agro-biodiversity. It is timely that suitable adaptive measures are identified in order to make Nepalese agriculture more resistant to the adverse impacts of climate change, especially those caused by erratic weather patterns such as the ones experienced recently.DOI: http://dx.doi.org/10.3126/hn.v11i1.7206 Hydro Nepal Special Issue: Conference Proceedings 2012 pp.59-63

Theoretical and experimental analysis of the thermal behaviour of a green roof system installed in two residential buildings in Athens, Greece

2009 ◽  
Vol 33 (12) ◽  
pp. 1059-1069 ◽  
Author(s):  
Aikaterini Sfakianaki ◽  
Elli Pagalou ◽  
Konstantinos Pavlou ◽  
Mat Santamouris ◽  
M. N. Assimakopoulos
Keyword(s):  
Thermal Behaviour ◽  
Experimental Analysis ◽  
Residential Buildings ◽  
Green Roof ◽  
Roof System

scholarly journals Evaluation of Climate Change on Streamflow, Sediment, and Nutrient Load at Watershed Scale

Climate ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 165
Author(s):  
Prem B. Parajuli ◽  
Avay Risal
Keyword(s):  
Climate Change ◽  
Water Quality ◽  
Minimum Temperature ◽  
Future Climate ◽  
Maximum Temperature ◽  
Nutrient Load ◽  
Climate Scenarios ◽  
Monthly Average ◽  
Average Maximum ◽  
Monthly Streamflow

This study evaluated changes in climatic variable impacts on hydrology and water quality in Big Sunflower River Watershed (BSRW), Mississippi. Site-specific future time-series precipitation, temperature, and solar radiation data were generated using a stochastic weather generator LARS-WG model. For the generation of climate scenarios, Representative Concentration Pathways (RCPs), 4.5 and 8.5 of Global Circulation Models (GCMs): Hadley Center Global Environmental Model (HadGEM) and EC-EARTH, for three (2021–2040, 2041–2060 and 2061–2080) future climate periods. Analysis of future climate data based on six ground weather stations located within BSRW showed that the minimum temperature ranged from 11.9 °C to 15.9 °C and the maximum temperature ranged from 23.2 °C to 28.3 °C. Similarly, the average daily rainfall ranged from 3.6 mm to 4.3 mm. Analysis of changes in monthly average maximum/minimum temperature showed that January had the maximum increment and July/August had a minimum increment in monthly average temperature. Similarly, maximum increase in monthly average rainfall was observed during May and maximum decrease was observed during September. The average monthly streamflow, sediment, TN, and TP loads under different climate scenarios varied significantly. The change in average TN and TP loads due to climate change were observed to be very high compared to the change in streamflow and sediment load. The monthly average nutrient load under two different RCP scenarios varied greatly from as low as 63% to as high as 184%, compared to the current monthly nutrient load. The change in hydrology and water quality was mainly attributed to changes in surface temperature, precipitation, and stream flow. This study can be useful in the development and implementation of climate change smart management of agricultural watersheds.

scholarly journals Effect of grazing period management on growth performances of camel in climate change condition

2019 ◽  
Author(s):  
Champak Bhakat
Keyword(s):  
Climate Change ◽  
Body Weight ◽  
Weight Gain ◽  
Body Weight Gain ◽  
The Body ◽  
Maximum Temperature ◽  
Change Condition ◽  
Average Maximum ◽  
Group 2 ◽  
Group 1

In order to decide the optimum time of grazing for camels during hot summer months, 10 growing camel calveswere divided into 2 equal groups. First group was sent for grazing during 10:00 h to 16:00 h daily and second groupallowed for grazing during thermo neutral period. The climatic variables were recorded daily (April 2012 to March2013). The average daily gain and total body weight gain in calves sent for grazing during relatively cool parts ofday (group 2) was significantly higher as compared to group 1 calves sent as per routine farm schedule. Theaverage intake of fodder and water from manger was higher in group 1 calves. The average DMI from manger forgroup 1 calves was higher as compared to group 2 calves. The comparative biometrics of camel calves in differentgrazing management practices revealed that body length, heart girth, height at wither, neck length were significantly(P&lt;0.01) higher in group 2 calves as compared to group 1 calves. After 180 days of experimentation, humpcircumference vertical and hind leg length were significantly (P&lt;0.05) increased in group 2 as compared to group1. Analysis of recorded data of climatic parameters revealed that average maximum temperature was higher duringJune 2012. The values of THI also were higher in monsoon and post monsoon months hence the practice of sendingcamel calves during relatively comfortable part of hot and hot humid months was successful in getting good growth.The relative humidity was significantly higher during morning as compared to evening period for all months. TheTHI was significantly lower during morning as compared to evening hours for all months in different climate forwhole year. Economic analysis reveals that the cost of feed per kg body weight gain was quite less in group 2 ascompared to group 1. So the practice of grazing of camel calves during cool hours of day remain profitable forfarmers by looking at the body weight gain and better body conformation in climate change condition.

Sign in / Sign up

Export Citation Format

Share Document