scholarly journals Proportional–Resonant Controller Structure with Finite Gain for Three-Phase Grid-Tied Converters

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6726
Author(s):  
Marek Nowak ◽  
Tomasz Binkowski ◽  
Stanisław Piróg
Keyword(s):  
Reactive Power ◽  
Pi Controller ◽  
Operating Conditions ◽  
Phase System ◽  
Real Time Control ◽  
Power Circuit ◽  
Time Control ◽  
Three Phase ◽  
Finite Gain ◽  
System Coupling

The paper presents the study of a three-phase system coupling a DC power source to a power grid. This study, based on an FPGA, implements a real-time control system and digital models of the power circuit. The proposed proportional–resonant (P+R) controller with a modified structure was part of the system, which can be used as an alternative controller to traditional ones, e.g., in photovoltaic systems. Due to difficulties in implementing resonant controllers, a P+R with a new structure using a PI controller was elaborated. With an appropriate approach to the generation of phase current patterns, it is possible to set the reactive current and, thus, compensate for the reactive power. The operation of the system for typical operating conditions (e.g., system startup, change in preset load) was characterized and compared with a classical solution using a PI controller.

scholarly journals Improvement of the performance of STATCOM in terms of voltage profile using ANN controller

2020 ◽  
Vol 11 (4) ◽  
pp. 1966
Author(s):  
Mohammed Salheen Alatshan ◽  
Ibrahim Alhamrouni ◽  
Tole Sutikno ◽  
Awang Jusoh
Keyword(s):  
Power System ◽  
Reactive Power ◽  
Voltage Drop ◽  
Pi Controller ◽  
Operating Conditions ◽  
Voltage Profile ◽  
Static Synchronous Compensator ◽  
Three Phase ◽  
Using Data ◽  
Artificial Neural Network Ann

The electronic equipments are extremely sensitive to variation in electric supply. The increasing of a nonlinear system with several interconnected unpredicted and non-linear loads are causing some problems to the power system. The major problem facing the power system is power quality, controlling of reactive power and voltage drop. A static synchronous compensator (STATCOM) is an important device commonly used for compensation purposes, it can provide reactive support to a bus to compensate voltage level. In this paper, the Artificial Neural Network (ANN) controlled STATCOM has been designed to replace the conventional PI controller to enhance the STATCOM performance. The ANN controller is proposed due to its simple structure, adaptability, robustness, considering the power grid non linearities. The ANN is trained offline using data from the PI controller. The performance of STATCOM with case of Load increasing and three-phase faults case was analyzed using MATLAB/Simulink software on the IEEE 14-bus system. The comprehensive result of the PI and ANN controllers has demonstrated the effectiveness of the proposed ANN controller in enhancing the STATCOM performance for Voltage profile at different operating conditions. Furthermore, it has produced better results than the conventional PI controller.

Modeling Smart Materials Using Hysteretic Recurrent Neural Networks

2009 ◽  
Author(s):  
Arun Veeramani ◽  
John Crews ◽  
Gregory D. Buckner
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Smart Materials ◽  
Real Time Control ◽  
Ferromagnetic Shape Memory Alloys ◽  
Two Phase ◽  
Time Control ◽  
Novel Approach ◽  
Three Phase ◽  
Ferromagnetic Shape Memory

This paper describes a novel approach to modeling hysteresis using a Hysteretic Recurrent Neural Network (HRNN). The HRNN utilizes weighted recurrent neurons, each composed of conjoined sigmoid activation functions to capture the directional dependencies typical of hysteretic smart materials (piezoelectrics, ferromagnetic, shape memory alloys, etc.) Network weights are included on the output layer to facilitate training and provide statistical model information such as phase fraction probabilities. This paper demonstrates HRNN-based modeling of two- and three-phase transformations in hysteretic materials (shape memory alloys) with experimental validation. A two-phase network is constructed to model the displacement characteristics of a shape memory alloy (SMA) wire under constant stress. To capture the more general thermo-mechanical behavior of SMAs, a three-phase HRNN model (which accounts for detwinned Martensite, twinned Martensite, and Austensite phases) is developed and experimentally validated. The HRNN modeling approach described in this paper readily lends itself to other hysteretic materials and may be used for developing real-time control algorithms.

Real-Time Control of Reactive Power in a Power Plant

1985 ◽  
Vol 18 (5) ◽  
pp. 951-956 ◽  
Author(s):  
I. Vajk ◽  
M. Vajta ◽  
K. Kovacs
Keyword(s):  
Power Plant ◽  
Real Time ◽  
Reactive Power ◽  
Real Time Control ◽  
Time Control

scholarly journals HIL evaluation of control unit in grid-tied coverters

2016 ◽  
Vol 20 (suppl. 2) ◽  
pp. 393-406 ◽  
Author(s):  
Vlado Porobic ◽  
Evgenije Adzic ◽  
Milan Rapaic
Keyword(s):  
Power Electronics ◽  
High Performance ◽  
Control Unit ◽  
Active Filters ◽  
Design Tool ◽  
Operating Conditions ◽  
Real Time Control ◽  
Time Control ◽  
Power Electronics Converters ◽  
Grid Connected Converters

Hardware-in-the-Loop (HIL) emulation is poised to become unsurpassed design tool for development, testing, and optimization of real-time control algorithms for grid connected power electronics converters for distributed generation, active filters and smart grid applications. It is strongly important to examine and test how grid connected converters perform under different operating conditions including grid disturbances and faults. In that sense, converter?s controller is a key component responsible for ensuring safe and high-performance operation. This paper demonstrates an example how ultra-low latency and high fidelity HIL emulator is used to easily, rapidly and exhaustively test and validate standard control strategy for grid connected power electronics converters, without need for expensive hardware prototyping and laboratory test equipment.

scholarly journals STUDY ON EFFECT OF UPFC DEVICE IN ELECTRICAL TRANSMISSION SYSTEM: POWER FLOW ASSESSMENT

2013 ◽  
pp. 70-74
Author(s):  
CH. CHENGAIAH ◽  
R.V.S. SATYANARAYANA ◽  
G.V. MARUTHESWAR MARUTHESWAR
Keyword(s):  
Transmission Lines ◽  
Power Flow ◽  
Reactive Power ◽  
Power Transmission ◽  
Stability Limit ◽  
Transmission System ◽  
Real Time Control ◽  
Electrical Transmission ◽  
Transmission Systems ◽  
Time Control

The power transfer capability of electric transmission lines are usually limited by large signals ability. Economic factors such as the high cost of long lines and revenue from the delivery of additional power gives strong intensive to explore all economically and technically feasible means of raising the stability limit. On the other hand, the development of effective ways to use transmission systems at their maximum thermal capability. Fast progression in the field of power electronics has already started to influence the power industry. This is one direct out come of the concept of FACTS aspects, which has become feasible due to the improvement realized in power electronic devices in principle the FACTS devices should provide fast control of active and reactive power through a transmission line. The UPFC is a member of the FACTS family with very attractive features. This device can independently control many parameters. This device offers an alternative mean to mitigate transmission system oscillations. It is an important question is the selection of the input signals and the adopted control strategy for this device in order to damp power oscillations in an effective and robust manner. The UPFC parameters can be controlled in order to achieve the maximal desire effect in solving first swing stability problem. This problem appears for bulky power transmission systems with long transmission lines. In this paper a MATLAB Simulink Model is considered with UPFC device to evaluate the performance of Electrical Transmission System of 22 kV and 33kV lines. In the simulation study, the UPFC facilitates the real time control and dynamic compensation of AC transmission system. The dynamic simulation is carried out in conjunction with the N-R power flow solution sequence. The updated voltages at each N-R iterative step are interpreted as dynamic variables. The relevant variables are input to the UPFC controllers.

scholarly journals High Performance Multistring Converter Topology for Three-Phase Grid Tied 200 kW Photovoltaic Generating System

2017 ◽  
Vol 1 (2) ◽  
Author(s):  
Mohammad Rustam M. L. ◽  
F. Danang Wijaya
Keyword(s):  
Power Efficiency ◽  
High Performance ◽  
Reactive Power ◽  
Simulation Method ◽  
Operating Conditions ◽  
Total System ◽  
Voltage Reference ◽  
Pv System ◽  
Three Phase ◽  
Converter Topology

Under various external conditions, grid connected PV system performance is strongly affected by the topology that is used to connect a PV system with grid. This research aims to design a multistring based converter topology for three-phase grid connected 200 kW PV system that has a high performance in various operating conditions. Research was done by a simulation method using Matlab-Simulink with performance being evaluated including the generated power, efficiency, power quality in accordance with grid requirements, as well as the power flow. In the simulation, multistring converter topology was designed using two dc-dc boost multistring converters connected in parallel to a centralized of three-phase three-level NPC inverter with the size of the string being shorter and more parallel strings as well as the maximum voltage of the PV array of 273.5 V close to dc voltage reference of 500 V. Each dc-dc boost multistring converter have individual MPPT controllers. The simulation results showed that this multistring converter topology had a high performance in various operating conditions. This due to more power generated by the NPC inverter (> 190 kW) at the time of high power generation on the STC conditions (1000 W/m2, 25 oC), the lowest efficiency of the total system is 95.08 % and the highest efficiency of the total system is 99.4 %, the quality of the power generated in accordance with the requirements of grid, as well as the inverter put more active power to the grid and less reactive power to the grid. The response of the inverter slightly worse for loads with greater reactive power and unbalanced.

Transfer Function Modelling of Urban Drainage Systems, and Potential Uses in Real-Time Control Applications

1994 ◽  
Vol 29 (1-2) ◽  
pp. 409-417 ◽  
Author(s):  
Andrea G. Capodaglio
Keyword(s):  
Transfer Function ◽  
Real Time ◽  
Sewage Treatment ◽  
Operating Conditions ◽  
Urban Drainage ◽  
Real Time Control ◽  
Control Applications ◽  
Time Control ◽  
Function Modelling ◽  
Transfer Function Modelling

According to the present state-of-the-art, sewerage systems, sewage treatment plants and their subsequent improvements are often planned and designed as totally separate entities, each subject to a specific set of performance objectives. As a result, sewage treatment efficiency is subject to considerable variability, depending both on general hydrologic conditions in the urban watershed (wet versus dry periods), and on specific “instantaneous” operating conditions. It has been postulated that the integration of urban drainage and wastewater treatment design and operation could allow minimization of the harmful effects of discharges from treatment plants, overflows and surface water runoff. This “ideal condition” can be achieved through the introduction of so-called “real-time control” technology in sewerage collection and treatment operations. To be a feasible goal, this technology poses the demand for more powerful simulation models of either aspect of the system - or, ideally, of a unified sewer-and-treatment plant model - than most of those currently available. This paper examines the requirements of rainfall/runoff transformation and sewer flow models with respect to real-time control applications, and focuses on the methodology of stochastic, transfer function modelling, reporting application examples. Modalities and limitations of the extraction of information from the models thus derived are also analyzed.

A New Method of Three-Phase Unbalanced Load Harmonic Current Detection

2014 ◽  
Vol 1070-1072 ◽  
pp. 726-730
Author(s):  
Hong Zheng ◽  
Yun Zhang ◽  
Jun Huang ◽  
Zhe Yu Wang
Keyword(s):  
Reactive Power ◽  
Detection Algorithm ◽  
Phase System ◽  
Instantaneous Reactive Power Theory ◽  
Three Phase ◽  
Unbalanced Load ◽  
Zero Sequence ◽  
New Type ◽  
Leakage Error ◽  
Improved Algorithm

The extensive usage of power electronic equipments makes harmonic problem increasingly serious. In unbalanced three-phase system, traditional p-q, d-q method ignores the zero sequence currents, resulting in zero sequence harmonic leakage error. This article is based on the basic principle of instantaneous reactive power theory, it proposes a new type of harmonic detection algorithm, this algorithm does not need phase-locked loop nor do a matrix transformation, and can effectively avoid the zero order harmonic leakage error caused by coordinate transformation.In the end, using Matlab/Simulink environment to build models of traditional algorithm and improved algorithm .Through comparison, the simulation result shows that the improved algorithm is more accurate and more effective than the traditional one.

Sign in / Sign up

Export Citation Format

Share Document